Magnum Power For @RobbyLayton Tow Truck! How-to build An NP 205 Transfer Case.

[@glenludwig5135]

You’re a great teacher Colt. Wish I was younger every time I watch you so I could make use of your talents.

[@coltbuildsit]

You can do it😎👍 thanks

[@jessepitt]

@@davedean1571. Leave your religious BS out of this.

[@timoy4988]

​@jessepitt thank you 😀👍

[@MarkoMygun]

Free Country Free Speech First Ammendment I guess you dont belive in this. Don't like it don't read it pal. ​@jessepitt

[@jessepitt]

@@MarkoMygun I was exercising my right to free speech. And freedom of religion.

[@thisisatest2576]

@ 1:32 - I think you simply misspoke stating that one rotation of the transfer case input creates 2 rotations at the transfer case outputs for low range operation. It's the other way around - It takes 2 rotations of the transfer case input gear to get 1 rotation of the transfer case output yokes in low range. Great channel and great video!

[@jeremywolfe5483]

I was thinking this too 😂

[@CharlieB195]

Yeah, got the reduction backerds!

[@Westerntraveler]

I am glad you got your own channel. I watched the whole S-10 build you do a great job of explaining the process.

[@coltbuildsit]

Awesome! Thank you!

[@xxBlazinBobxx]

You're a natural at explaining things on camera, Colt! That wrecker Rory is putting together for Robby is one cool project!

[@GP54]

Its good to see someone teaching, showing, and explaining again. Even if i think I know how to do something its always good to watch someone else show how they do it. Keep up the great content!

[@isomer13]

Nice DIY. Can't wait to see the Pacer build. Thanks, Colt.

[@wallygreer4931]

You are a good instructor, you show not only how but why, so its easy to follow along if someone wanted to do the same! Great show, shows you really care for your viewers! ⭐⭐⭐⭐⭐

[@coltbuildsit]

I appreciate that!

[@MrChrissy1r]

Hello from Englandistan, Great that your looking after Robbie, and your hands. I was not so considerate with mine for years gripping hard, hammering chiseling etc. To my cost, I have had in all 13 operations on them now, and they're still not right. Look after your hands and backs guys one spinal op down now, so no more strain for me.

[@Wesley-uo3rn]

Some people can't explain it.. you have it figured out. Really like what u do

[@ge3186]

Nice video..!!! Never heard them called crush sleeves Weve always called them rollpins

[@billlove6128]

Or spring pins

[@tedz74]

Yes, roll pins. Crush sleeve is on your pinion.

[@glenwestphal7510]

That's what I love about your channel , you explain everything so good and make it look easy but I also know what and why and no one ever does that , as if everyone knows what they are doing ! But even the hint at what to do and NOT do at the junk yard ! Awesome info , thanks !

[@terryfoust4802]

COLT, VERY informative and step by step instructions. WELL DONE SIR!!!😀

[@richis65]

Love seeing how things come apart and come together. Robby should be happy.

[@TyroneNorman-j2i]

What a pleasure listening to you explaining every step of the process.

[@daveallmon6937]

Thank Matt and Robbie for me following you..

[@craigclark3279]

Many, many thanks for the class and your knowledge on this part. I sent this to my off-road friend. It made his day. He is now looking to gather all the parts he needs. Thank you again.

[@coltbuildsit]

Glad it helped!

[@davidweidner1675]

Way to go, Colt. It's great 👍 to see you working with other KZbinrs!

[@jacobthornock317]

14:19 nice reference to don't tell mom the babysitters dead. 😅

[@hazeljustice307]

Hey Colt I've watched you for years when you was bleepanjeep I'm so proud of you going out on your own you are growing fast and nobody explains things like you thank you so much you did amazingly good job on your S-10

[@daveogarf]

(*you WERE "BleepinJeep"). Ever heard of periods (full stops)?

[@hazeljustice307]

I just said he was growing his own channel fast I truly didn't mean anything by that post I'm sorry

[@Derf1313]

Have to chuckle every time someone talks about the 205. My long time work truck (73 K30) I bought in '81, has a 205, but I've rarely used low range, the darned 4 sp creeper is really low to begin with, lol!! Great build with explanations! Thanx !

[@JasonSmith-xo9qr]

Rad explanatory teardown and rebuild. Made it look as easy as a black n white coloring book.

[@Ddabig40mac]

I know that coloring book, my favorite page is the Killer Whale.

[@justinwaite2139]

That was a great explanation as to how a Tcase actually works, I really enjoyed the commentary as you went along. Great video!

[@coltbuildsit]

Glad you enjoyed it!

[@normanpatane2417]

I love what you do. I'm glad you have your own channel. I hope all is good with you and Matt.

[@GEORGEFIRE777]

crush sleeve ?? In California its known as a roll pin ,i was scratching my brain to figure it out . still good ,keep up the good video;s

[@georgenahodil23]

It's a roll pin in West Virginia too.

[@markstrickland438]

Always called them roll pins in NC, too

[@01XJBenjamin]

Roll pins for sure here in PA. Crush sleeve is used on an axle pinion to adjust pinion preload here in PA.

[@melsjunk2645]

Even in canada I was told they were a roll pin or split pin sometimes lol

[@markstrickland438]

I'm certain he knows the difference, he just misspoke. I know that I would screw up like mad if trying to make an educational video of any type.

[@bulletproofpepper2]

Rattle can paint on the drivetrain is the best for quick touch ups. Thanks for all the tips and tricks, great information and very helpful.

[@johnnykirkland611]

Good morning Colt keep'em coming 👍👍

[@leonitus1007]

I just got a ford 205 today and my father In law watched this and told me about this!! Thanks for the build and links for parts.

[@joshgreen2164]

Was that a "don't tell mom the babysitter is dead" quote? Nice

[@FORCE_PBC]

You should put out a call to anyone looking to finish a project. Some people lack all the knowledge. You can swoop in and get a video and a friend out of it. There are tons of trucks at 97% that could use help but too proud to ask. Or don’t know who to trust. Just an idea.Bearded mechanic does that with motorcycles. You always help people and you are a good dude. That’s why I said it.

[@donovanlcarroll]

Here’s a comment for the algorithm, Looking forward to more great content. How cool to do these projects that help other YT fabers. This is going to be a great channel, thanks for sharing Colt!

[@seanknight9898]

Great job explaining the process. And, Vive La Off-Road Designs! I love outfits that truly think out a design.

[@taurota1554]

Awesome and outstanding.Thanks for sharing and taking us along

[@brianhendricks5326]

Great job as always looking forward to seeing more.

[@bencluff3851]

Nice video Colt!. You sure make things look easy!

[@bryduhbikeguy]

Saw a couple vids where people aded 'the doubler',but they didn't Explain how they were doing it,or show the internals.Thank you for doing that,and even painting it for Robbie.Instantly earned another Sub.

[@mikeflick4737]

I want to thank you for explaining what you are doing very well. 😊

[@rhllnm]

Sold me on ORD. Crazily smart design.

[@MichaelMaxim-ft5sv]

Going to tough ..Robbie needs it he will send it when needed

[@brianward3944]

Great job! Love the explanation on the ratios. Guess I missed the twin stick how to part.

[@douglasnsubuga7962]

You do an excellent job explaining what you're working on.

[@johntebbetts4752]

Great job Colt, thanks for the info.

[@CircleBrewery]

Very well explained and marketed you do a fine job 😊

[@byers704]

Nice walkthrough.

[@b.d.johnson3466]

Just a thought about a shirt logo COLTBUILT. Love your content.

[@steveclark4291]

Thank you Colt for another teaching video !

[@aaronbrand3813]

I’m really liking your new channel… I’m only subscribed to 9 channels… Welcome to the top ten..!

[@coltbuildsit]

Awesome thanks!

[@h2recoveryteam2]

Outstandingly done Colt.

[@adamchaffee6536]

Great stuff, Colt. Calling a roll pin (or spring pin) a crush sleeve has a bunch of us scratching our heads though.

[@dwal2165]

Thanks for making.

[@GregLanz]

There's a very good chance that I'll never need to know any of what you showed and explained here but it was still quite compelling, thanks!

[@samwalker3441]

Another fantastic how to from Colt. I am really digging your channel, Colt. Please keep up the great work.

[@coltbuildsit]

Thanks! Will do!

[@SmokedogsCreativeFlows]

as always A-class step by step DIY video for the 205. Great job. Keep it coming!

[@philip4x4guy]

I really like this kind of content, man I'd love to have this doubler in my 79!

[@rondunlap4628]

Colt you da man and keep em coming you explained things really well .ty

[@mikemassey1405]

Colt , your doing well . Thank you for the great content .😊

[@robertforget6369]

i've rebuilt street bike transmissions years ago so was able to follow alone that was pretty good great video keep them coming

[@keithmerchant225]

Great video.. lov how you take the time to show every little detail..

[@TheOldaz1]

Good stuff Colt. Your instructionals are pretty much first class.

[@coltbuildsit]

I appreciate that!

[@Kraaavity]

Never worked on one of those before, thanks for showing us brother 🙏

[@ateamoffroad1179]

That's awesome so glad you started your own channel

[@raystevens687]

Hi Colt just wanted to say thanks for doing a great job on the transfer case. You made it understandable for me great job for sure.

[@coltbuildsit]

Glad it helped!

[@terrellpettijohn3952]

Great explanation of how things work.

[@jeffjones6115]

Hey Colt great timing on this, my son and I have just started to rebuild the T-case from my '72 Dodge W100 we want to add the twin stick as well as an overhaul!! Thanks for the info.

[@mahbriggs]

I have used an oxy-acetylene torch to burn off heavy deposits of oil, gease, and tar! Just keep the torch moving! The idea is to burn off the crud without heating up the metal underneath!

[@gregb76]

just kidding. Great job on rebuilding that 205 case Colt. Great video Colt I enjoyed it.

[@rogerk1710]

Way too tech for me as I don’t go wheeling but you explain everything so well and super good knowledge passed on to everyone. You’re doing well Colt!

[@noonehere1793]

Impressive knowledge sir!👍👍🙂

[@paulshannon4576]

I had a 74 F-100 4x4 and it had a NP-203 transfer case. I always wanted to put a NP-205 in because you could use factory parts for the change but in 30 years I just never got to it.

[@wrong4538]

Hey Colt. Way to be looking out for other peoples safety and suppling them with a much improved part that they won't have to worry about. Way to go and keep it up!!

[@michaeldunn150]

Another great video Colt...... I learned a lot about transfer cases and gears...

[@mtsmith72]

Great tutorial! Really like Watching your videos!

[@coltbuildsit]

Glad you like them!

[@brwsdad1]

Just so you know those "crush sleeves" are really roll pins, enjoyed the video thanks

[@benblasko3115]

Clean as you go, I used the same process when I cook food. Easier to manage things that way.

[@gregb76]

Come on Colt you are a man's man that can't be that heavy.

[@garyschlagheck603]

Excellent video, you have a good ratio of talk to show. 😊

[@Heeman5]

Awesome vid Colt. Keep them coming!👍🏼🤙🏼💪🏼

[@charleswelch249]

Love your explanations for what you need a doubler for and how easy it is to install.great video.

[@coltbuildsit]

Thanks for watching!

[@stanley526]

Great expanation. Thanx Colt.

[@LionheartSails]

You do a Great job explaining what you are doing.

[@stuartkcalvin]

Amazing! Now subscribed. Looking forward to Layton fitting it :) Or Rory

[@alanpartridge9066]

Hi. Here in the uk we call those crush pins roll pins and use a special drift to knock out and to refit , nice video thanks

[@katreniaclark]

GREAT job Colt.

[@bigbird8617]

Thanks for the how too video, keep up the good 👍

[@joem2474]

Well done Colt.. Well done..

[@COM70]

Thank you thank, you thank, you for finally explaining the nomenclature, it has been bugging me for years ❤

[@MarkoMygun]

Nice job Colt ,your channel is really doing well congrats.

[@christopherthompson4359]

You are great at explaining these projects.

[@ford_drivingbuilder4225]

you make some great how too videos. keep up the hard work.

[@timoy4988]

You have alot of knowledge of t-cases. Thanks for sharing! Love your channel. 😀👍👍

[@BRIANSALLIS-z9k]

wow what a great video, even if i did not understand most of what you were talking about but to hear you tell everyone the ratios of the transfer case and what it can do, just wish i had paid more attention when i was in school, it is ok just call me Thicko

[@adamfowles1060]

I was hoping the midnight Metalworks case would have worked out... I bought one mostly from the review you did with good explanation of how these work

[@cheatcanyon1]

You are a wealth of knowledge!

[@555byron]

Colt, you do a great job in your build series. The S10 was an amazing budget build, I love that it performs so well on simple leaf springs. Can't wait to see the Pacer build

[@555byron]

I also meant to add that this video is in that same category. The t-case doubler build on the S10 was exceptionally explained and interesting as well.

[@lorenzoblackie1629]

Nice 👍, those pins you call crush sleeves, I was always told were roll pins

[@waynehutcheson6479]

Glad you got your own channel co.Keep it up

[@johnoldonekanole602]

Impressive, simply impressive. How you guys can know all this stuff. I dont imagine they teach any of this in a trade school. You guys should check into becoming instructors. Thank you for sharing this great adventure.

[@coltbuildsit]

Wow, thank you!

[@jameskendrick573]

Looking forward to seeing what you accomplish and the pacer build will be awesome I'm sure

[@donaldpowell3469]

Yes, I like your videos, informative with experience and doesn't drag along. What's next, an AMC Gremlin?

[@jaqass07]

"Dishes Are Done"....classic

[@coltbuildsit]

Glad someone got it, ha

[@harleycharley8323]

Loved this video. Already a subscriber! Normally these kinds of vids are boring, but you made it interesting!

[@coltbuildsit]

Thanks for the sub!