Maiden flight FlyPro 300C from RCMaster

[@brianroberts5062]

Do you know how to switch from mode 2 to mode 1? Its easy on the transmitter but the motor will not arm with the combined switch throttle down and right arm command.

[@antoniolascala1879]

Good evening, I would like to do the swashplate leveling. Please, could you send me the whole procedure? Thanks in advance Antonio La Scala

[@immernochda0815]

Hi Antonio, this is the other side of this RTF Helis, sooner or later you have to fix them. This is the time to start to learn what you are doing. Swashplate leveling is for all Helis the same and there are hundreds of videos here on KZbin that will show you how to do it. I won’t do an other tutorial about that. Sorry but I’m no retailer or shop owner of these toys. I’m doing these videos for fun.

[@denisdb1]

Hello, is there any auto stabilization when in "stabil." mode (the switch is in the far back position) or it's ALL manual control when in that mode? Is it possible to lift off and stay in "p.hold" mode all the time? Can you even land in "p-hold" mode? For me it's confusing that the engine can be started only from manual mode.

[@immernochda0815]

denisdb1 there is only two ways to find out: 1. Just test it, 2. Read the manual. This video is 2 years old and we crashed that thing after 12 minutes, we never repaid it or flew it again, because we think it is not worth it. Do you really think we can remember after 2 Years how this thing worked, with 12 minutes of experience?

[@denisdb1]

@@immernochda0815 sorry, now I see that video is 2 years old (at first I thought it was nowadays)... what's freaking me out about that heli is that there's no chance to find any manual or any instructions

[@immernochda0815]

denisdb1 but there was some instructions with it as I remember, how could we get it in the air without. Here you can see what was in the box. kzbin.info/www/bejne/h3SqdnqMj9iUmKc But on the end this Heli is only good for the shelf, 4 min Flight time is a joke.

[@denisdb1]

@@immernochda0815 Thanks, I'll check it...

[@kenbrown5560]

I bought this a yr ago rtf I’m an experienced pilot I can’t find any instructions on how to arm the helicopter I get to where are the helicopter functions but the blades won’t turn I need to know how to arm this what switch to flick can someone help me

[@marka6487]

kzbin.info/www/bejne/raXaXpqLn7d6aJY

[@philippedouvier22]

Ich habe ein Problem mit meinem Hubschrauber, er erkennt das GPS, die Klingen beginnen sich 10 Sekunden lang zu drehen und er hört auf sich zu drehen, die kleine LED wird gelb und blinkt und wir hören mehrere Pieptöne und es ist unmöglich, sie auch in wieder abzunehmen Wiederholen Sie die Manipulation vor dem Start. Können Sie mir sagen, woher dieses Problem kommt? Vielen Dank

[@immernochda0815]

Kenne das Problem nicht aber wenn man nach dem anlaufen der Rotorblätter nicht startet werden sie aus Sicherheitsgründen wieder ausgeschaltet. Also nach dem Anlaufen gleich starten und nicht abwarten bis er wieder ausschaltet.

[@RcBachelor]

@RCMASTER Genau das Problem hatte ich auch. Hast du beim Einschalten und nach dem Binden auch im Normalmodus die Blätter mit einem leicht positiven Pitch? Ich vermute das Problem lag bei mir und bei dir an einem schwachen Akku, der vermutlich die Software/Firmware im Gyro durcheinander rüttelte. Mein Heli kam auch unkontrolliert beim GOHOME zurück und landete oszillierend und kam mit den Blättern im Dreck. Dadurch ging der Strom extrem in die Höhe und der Motor schaltete erst nach einigen Sekunden automatisch ab. Dadurch ging am Ende der AKKU-ZEIT dieser extrem in die Knie und hat wohl diese Software irgendwie durcheinander geschmissen. Der Heli steigt nun automatisch hoch im Normalmodus und das Heck rastet erst nach Sekunden ein. Leider meldet sich RCMASTER nicht mehr. Sie brauchen doch nur die Software schicken dann könnte man sie in das System über USB flashen und alles ist gut! Sie reagieren noch nicht einmal auf die Infos die ich hierzu gebe in KZbin??? Was ist das für ein SAUHAUFEN dort? Hauptsache kassieren, dann über Monate hinhalten und dann einfach in den Spam drücken und blockieren. Echt super [e-mail] RCMASTER - Genial daneben !

[@mdhalimkhan9394]

hi brother How much does it cost and how can I buy it

[@immernochda0815]

banggood.app.link/ofwgXNMQacb

[@sabbirahmad8435]

how much is it bro,???

[@pilotmiami1]

Bravo.perfect

[@MAPAHaus5]

Any chance you can get do instruction in English?

[@immernochda0815]

The best chance is to use our Form and use the translation Funktion. walkerafans-forum.de/threads/startprobleme-fypro-300-c.5243/#post-111933

[@RcBachelor]

My Problem with Heli activation is solved.

[@sabbirahmad8435]

please tell me bro how much is it,??

[@marka6487]

www.banggood.com/JCZK-300C-470L-DFC-6CH-3D-Three-Blade-Rotor-TBR-Scale-RC-Helicopter-RTF-with-AT9S-PRO-Transmitter-p-1484531.html?rmmds=category&cur_warehouse=CN

[@RcBachelor]

Hallo my friends - Can you please look that video in KZbin: Flypro 300C JCZK Problem Activation I cannot longer activate my helicopter??? Can you help me please? Have a look on the LEDS from System. Maybe the GPS is damaged? And thats why the Heli does that horrible flight and horrible landing with a crash at ground. After Repair it does not activate. All cables are tested and they are OK. Are the LEDS correctly blinking or not? Who can help me?

[@immernochda0815]

I’m sorry but ours is chrashed too as you can see in the Video. Since that we didn’t do anything to it because we have no interest to repair a helicopter with a flight time of somewhat 4 minutes. Sorry that we can’t help you.

[@RcBachelor]

@@immernochda0815 What do you do with the rest from that Heli? Is the TX Mode 2? Maybe I take that for little money.

[@RcBachelor]

@@immernochda0815 Maybe you can tell me the settings from TX?

[@immernochda0815]

RcBachelor the Heli is at Sergei‘s place. Contact him if he can help you.

[@RcBachelor]

@@immernochda0815 Do you have a contact from him? Or email?

[@neelesh441]

Sir ji केसे बनाए हम भी बनाना चाहते हैं

[@ApmusicAbhay]

Nice

[@bobbymalta73]

Wow very impresive!

[@RcBachelor]

Leider wird dieses Walkera Forum nicht bedient, Weder eine Antwort noch die Telefonnummer vom IMPRESSUM sind aktuell oder funktionieren nicht. Auch die EMail funktioniert nicht???? Für ein Forum ist das sehr traurig.

[@immernochda0815]

RcBachelor das ist ein Forum und keine Hotline.

[@RcBachelor]

@@immernochda0815 Dann würde ich auch keine Hinweise geben, dass da jemand erreichbar ist!!!

[@danielemulazzi7309]

Woww! !!...spettacolare !!!

[@denyclaire]

It´s is a "flying-pearl", for sure !...but too expensive...There´re other options less expensive if you buy a kit and accessories separetely, just searching in the net from other suppliers...

[@jeffmullinix7916]

They want from 800 to 1300 USD for this helicopter . It is not that big . Maybe a 400 size what it looks like . Why to much money for this thing . But it does look cool

[@kentrinfret2979]

Was it’s dat?

[@immernochda0815]

Kent Rinfret dat is ein Fliegmaschine.

[@spq91971]

Good fly

[@chvinodsai]

How mach in money

[@valmirfloripa]

eu nao sabia que existia helimodelo com RTH eu tenho um mavic platinum , mas axo o voo de helimodelo melhor . com RTH e com essa estabilidade ficou OTIMO , mas a fuselagem podia ser de outro modelo , talvez bell 222 . pena eu nao ter condições de comprar um desse agora . comprei o mavic em 12 vezes e ainda faltam 7 meses para pagar kkk

[@immernochda0815]

O problema é que este helicóptero tem apenas um tempo de vôo de 5 minutos e seu Mavic pode voar 25 minutos. Isso torna este modelo completamente inútil, porque se você estiver a 200 m de distância e ativar o RTH, o helicóptero levará mais de 5 minutos para retornar. Por isso, irá travar, como no nosso segundo vídeo.

[@best_pilot]

11:26 Depp ! ! ! Immer zuerst den Sender einschalten ! ! !

[@immernochda0815]

Du hast bestimmt die Bedienungsanleitung gelesen. Bleib bei deinen Sperrholzspinnen du Profi👍

[@дадондадон]

Сколько эта штука стоет

[@liangzhang6321]

AT9S 和我用的遥控器一样。

[@immernochda0815]

Liang Zhang how about English please.

[@liangzhang6321]

@@immernochda0815 OK My English is not good,so i didn't reply you in English My remote control is the same as yours.

[@immernochda0815]

👍 I really like the RadioLink products, I also use chargers from them. It is very good quality.

[@liangzhang6321]

@@immernochda0815 i just looked in the battery case of my remote control and production date is 12.2014.mine is AT9,which was used in the first batch of products and is still very good.

[@ipadize]

ist auf jeden fall etwas anderes aber nicht meins

[@kentrinfret2979]

Sprecken sie English bitte

[@immernochda0815]

We could do that but we are a German Chanel, all other videos on this Heli are in English so there is no need for it.

[@busfan1234]

Kompliziert...wenn.du das nicht weißt, bringst du das niemals in die Luft...