Main rotor blades, what are they made from. Let's find out.
Пікірлер: 52
@Agislife1960Ай бұрын
As an Aircraft mechanic back in the 90's I worked with a helicopter crew chief who was in Vietnam, he said in comparison they had very little trouble with the wooden rotor blades of the Bell 47
@Ben-Dixey3 жыл бұрын
Excellent video, very informative. It's not so easy to find this information. thanks for posting
@Britspence3813 жыл бұрын
Thank you, I've often wondered about the construction of rotor blades, good video.
@jameskuria16643 жыл бұрын
This is the most informative video I have ever seen on blades. Thank you very much bro
@vitorsousa5390 Жыл бұрын
Thank you very much for sharing that with us.
@SHANNONLAUGHREN7 ай бұрын
Amazing information! I had no idea there were no many variations. I also love your flower shirt! You must be such a fun person to learn from.
@MrSkidkicker7 ай бұрын
You, sir, sound like a very wise person, and someone that should never be ignored
@davidjackson21152 жыл бұрын
Thankyou for your information. God has blessed America in this regard with kind honest people who freely share valuable information. Mind you, I think they got my idea while doodling on paper {with high-powered satillite / when DCsniper was active} regarding extra large mass at end of blades. My idea was to make the rotor shorter & determined centrifugal throw out force helped keep the blades level so as to lift copper instead of ends of blades lifting up, so idea was to have mass at ends. Basedon what youve shown i think steel leading edge for strength but bit of lead only at end to keep the weight down. Thankyou for your time and effort to bring us this information.
@get2dachoppa2493 жыл бұрын
So we've got Agent Jay-Z covering gas turbine powerplants, & Mr. Skidkicker covering rotary wing theory. Noice.
@Celler26 ай бұрын
Thank you a lot, awesome info.
@SuperYellowsubmarin2 жыл бұрын
Nice share. FYI, the weight repartition in the leading edge is also very important to provide a correct balance. Just an airplane, a rotor blade needs to have the CG forward of the center of life about 25% of chord.
@sarcamahardika88532 жыл бұрын
Good job
@shademe Жыл бұрын
Wow very interesting and informative I'm glad I came across your video. Thank you
@titikolomongso47233 жыл бұрын
Good share.. Getting better (Indonesia)
@chris77777777ify2 жыл бұрын
Thanks. Very interesting
@clunkonester48842 жыл бұрын
I was thinking about making my own heli, but I had no idea what the blades were supposed to be made of, thanks!
@MrSkidkicker2 жыл бұрын
Glad i could help but think it would be prudent of me to discourage you from building your own.
@clunkonester48842 жыл бұрын
@@MrSkidkicker yeah I get it man
@stealhty13 жыл бұрын
Neat Explanation Thx
@richardbien99682 жыл бұрын
I love your video sir,id like to make one mosquito copter my own. i do not know wher to get ready to use swash plate and main rotor blade. Im just a little non-pro mechanic.. 😊 from 🇵🇭🇵🇭🇵🇭♥️♥️♥️
@adjustablewrenchdiy59072 жыл бұрын
Thank you for your informative vedios. I want to make a drone by using a motorcycle engine and capable to left a person. If I use 150cc engine and two perpellers. How big should be the perpellers and how fast the rotation should be?
@mauriciocastro6363 Жыл бұрын
I wonder how the attachment of the composite blade is done to the hub, with composite lugs. The section of the blade shown here is filled with foam, but I believe that would not be strong enough at the attachment with the pins and bushings. I know there are some with thick solid laminate but I wonder of it's done.
@abdulaziza3 жыл бұрын
Great 👍
@CKP87253 ай бұрын
From Odisha
@tonyadede25812 жыл бұрын
Thanks
@johno95072 жыл бұрын
It's interesting that in the world of helicopters both radio control and full size rotor blades are either referred to as 'symmetrical' or 'asymmetrical' whereas a planes wing is 'cambered' or 'uncambered'.
@prakashmahata68302 жыл бұрын
Sir Is that manerial available in Nepal? Because I need this types of rotor blades
@hudakalava55532 жыл бұрын
පට්ට එකෙන්ම .
@ponjasptk78592 жыл бұрын
How thick is the almunium mr??....from Indonesia tq
@Littlewings01 Жыл бұрын
Sir how is a feather hinge is made. Can I make one just using a bearing? For my RC? Will it stand the centrifugal force?
@peterrestaino7047 Жыл бұрын
also sikorsky aluminum spar and glued on pockets
@oscarpimentel3315 Жыл бұрын
Hi, do you make the ser of main blades for Hughes 300 , A, B, C, ?
@irfanbaig6077 Жыл бұрын
Aluminium sheet size?
@m.samaha47082 жыл бұрын
Do you have free and old swashplate to study on it? Can you explain how it works
@ssscnc66633 жыл бұрын
hi ,do you have helicopter main rotor or tail rotor blades ,how to making videos can you post
@jeremijerem912 Жыл бұрын
Dommage que je comprenne pas tout, mais ça semble vraiment intéressant 👍
@hakim59372 жыл бұрын
Whats is actually the fuction of D-Spar? I'v been asked in exam
@hakimkurd13492 жыл бұрын
Have for sell main rotor and main rotor blade?
@gameitup39983 жыл бұрын
Sir make a video about weight balance in a simple way
@MrSkidkicker3 жыл бұрын
I think I will save that for Shannon in AMT 704
@sonamsingh63403 жыл бұрын
Ok boss
@user-bh4dj4np7c2 жыл бұрын
❤❤💯💯👍👍
@vidiocampur83933 жыл бұрын
Indonesia🙏🤝👍
@user-xi2xl4gz5j3 жыл бұрын
АССАЛАМ-АЛЕЙКУМ, ИЗ УЗБЕКИСТАНА, МОЖЕТЕ НОМЕР ТЕЛЕФОНА ОСТАВИТЬ ЗАРАНЕЕ СПАСИБО
@sydneylaughren30532 жыл бұрын
my dad made me do this
@user-oc5sq1gm7y Жыл бұрын
😍😍😍😍😍🌹🌹🌹🌹👏👏👏👏👏👏👏👏
@federalagenciesarecourtesans2 жыл бұрын
Some helicopter blades have Nitrogen Gas inside to keep the moisture out.
@garyanderson75202 ай бұрын
Also provides specific pressure and if it gets low enough bim indicator will either go red or black signifying a potential issue and blade needs to be replaced.