Ditto on the cleanliness. From one machinist to another... Bravo good sir. Bra...vo.
@richardhead82642 жыл бұрын
_Chris, I could hear Kurtis in my mind saying _*_"Red Bananas"_*_ at _*_6:47_**_._* 😄
@adam-11122 жыл бұрын
😅😅
@jimmurphy60952 жыл бұрын
Leave Karl out of this! 😄
@maeb61082 жыл бұрын
Every Sunday morning I watch a very talent machinist. Good work Chris.
@mattpinto23512 жыл бұрын
I'm always impressed with amount of chatter you get, which is none.
@TheDandyMann2 жыл бұрын
He got those feeds and speeds dialed in poifectly
@loukola53532 жыл бұрын
Are you new to machining? Chris is machining a big heavy part in a big rigid machine using huge toolholders. The chance of chatter is close to zero.
@mattpinto23512 жыл бұрын
@@loukola5353 I'm not new to the game, just appreciative of good work when I see it. Just trying to pay the man a compliment
@loukola53532 жыл бұрын
Always loved how clean you keep your machine. It speaks volumes.
@lotarzi19 ай бұрын
Mit Wasser immer sauber !
@tdkrei2 жыл бұрын
My favorite machine to set up and run, one of them had a 162" table.
@bostedtap83992 жыл бұрын
Great work, and great vlog 👏. Thanks for sharing.
@user-ok3ur3hz4p2 жыл бұрын
역시 외국기술자분 솜씨가 깔끔하시네요
@BruceBoschek2 жыл бұрын
What a joy to watch. Thanks so much, Chris!
@torstenthiele7702 жыл бұрын
Fantastisch, saubere Arbeit, die Maschine gefällt mir, geiles Teil. 👏👏👏👍
@bL4Xzy2 жыл бұрын
how you get always that perfect concentricity :o
@ChrisMaj2 жыл бұрын
You just have to be very gentle with the jaws.
@johnlawler16262 жыл бұрын
Great Video again mate thanks for sharing 👍
@Laggulrym2 жыл бұрын
Handsome man & CNC machine
@Chiefs15822 жыл бұрын
Those are about the same size forgings I machine my vtl is smaller but we have a NEO 2 that's about the same size.
@paulmace79102 жыл бұрын
Ok, you win the 4-jaw chuck contest (VTL division).
@theessexhunter13052 жыл бұрын
Supper nice.....as ever
@Donkusdelux2 жыл бұрын
Skilled guy~
@swanvalleymachineshop2 жыл бұрын
Nice one . Cheers .
@TrPrecisionMachining2 жыл бұрын
good job chris maj
@larryblount33582 жыл бұрын
Do you have a favorite insert mfg? Always enjoy the vids. Thank you for sharing.
@ChrisMaj2 жыл бұрын
Most of my inserts are KENNAMETAL, Korloy, Seco and MITSUBISHI
@larryblount33582 жыл бұрын
@@ChrisMaj that covers a few of the best :)
@jimsvideos72012 жыл бұрын
Alright not bad, but let's see you juggle three of them 😄
@user-ok3ur3hz4p2 жыл бұрын
와우 어메이징
@StanislavPacourek2 жыл бұрын
Kdyby si používal G kód místo hloupého cyklu, mohl jsi použít M4 a jedním nožem obrobit celí kus. If you used the G code instead of a stupid cycle, you could use M4 and machine the whole piece with one knife.
@TheVist72 жыл бұрын
A jak obrabiasz drugą stronę to pod szczęki podkładasz jakieś brązowe podkładki :D?
@ChrisMaj2 жыл бұрын
To zależy od kawałka i za jaką średnicę łapię. Czy za powierzchnię bardzo gładką, gdzie raczej nie powinno być żadnych odcisków, czy coś nie dokładnego.
@user-ok3ur3hz4p2 жыл бұрын
👍👍👍👍👍👍👍
@nigelsmith73662 жыл бұрын
Does the lathe change speed as it moves towards the centre to keep cutting speed consistent
@TheDandyMann2 жыл бұрын
Yup, constant feed is programmed into most lathes nowadays
@xyzfree82 жыл бұрын
G96
@TheOnlySgtRock9 ай бұрын
Curious why you choose 4 jaws over 3? We always have issues with distortion (of course our parts are thinner walled than this).
@ChrisMaj9 ай бұрын
I don't think larger chucks come with 3-jaw. At least I've never seen one
@TheOnlySgtRock9 ай бұрын
@@ChrisMaj I'm talking about your O.D. clamping blocks you use in your video. You can space them at 90 degrees or 120 degrees.