Make A 45lb SLINGBOW, SLINGSHOT FISHING for $10 FULL Tutorial From PVC TO SLING BOW

[@itechhen]

Mark, do you think the pvc would support a dual tube bandset? Also, what is the absolute maximum length the arms can be on the W before it becomes too unstable. Also, I'm in the States and I'm not sure we have that same orange electrical conduit. I'm thinking about making one for this summer but I still need a heat gun. I tried heating up some white pvc and it didn't get very malleable not at all and got charred and blackened from a fair amount of burning trying to do this over an electrical stove top. The pvc I have is just a test piece at 1½ inch in diameter. I like the dimensions of the stuff you use far better, nice and thin for a comfortable grip.

[@russellperhamii2629]

Dude! That’s AWESOME!

[@rockriv2238]

Hmmm.... might have to give that a go. Nice job.

[@markstuff681]

for sure!

[@paulanthony873]

I hope you destroy these after you post the videos online, remember we live in Police state, I received a $5000 fine and a 12-month suspended sentence in Parramatta court for a PVC slingbow

[@markstuff681]

why? isn't it in the same class as a compound bow?

[@lordrichard8184]

I really like the idea of the sling bow. It seems way more maneuverable then a traditional bow and much handier to have if you’re on a boat or moving through the water

[@TechTins_Projects]

The link to the rubber bands no longer valid. Page now gone. What type should one buy plus size diameter etc. Great video.

[@bobur723]

Thank you MARK JOHNSON and thankyou for your attention!!! I'm sorry because i could not 1st but I'm very happy 😊😊😊😊 I liked this is sling bow it is very good made!!! Good luck next works respect with BOBUR MIRZO!!!

[@markstuff681]

thanks mate! love the comment it gives me motivation to keep making videos for u

[@bobur723]

Ok @@markstuff681 i'm very happy. I always support you and I always watch!!! good luck next works

[@TaeKenDo]

If you heat up the stem the width of your hand, with a thick cowhide glove, you could squeeze it to make a finger grip. Just an idea that came to me.

[@josephdonais3436]

A word of caution with this build. There is a very good reason to send the arrow through a piece of pvc or even a washer. Without this the arrow may be sent flipping end over end. I will not contemplate how this could be dangerous. I know enough after being busted in he lip by a steel bolt launched from a wrist rocket.

[@uncledavesfrontier6846]

Outstanding build. I love to bowfish. Definitely have to make this version.

[@RobertoCampos-mf1ib]

Did you made it bro? I was thinking about it but I´m afraid the molded pvc ain´t sturdy enough

[@uncledavesfrontier6846]

@@RobertoCampos-mf1ib I bought a slingbow. Chief aj brand. I love it. I bow hunt with it.

[@archersfriend]

I would have put the real "slot" in the Front for a more positive hold of the real. Then the hose clamp at the Rear. The hose clamp would then Only be holding down the real and the main force would be on the Front Slot. Should the hose clamp become loose, then the real is still captured. If the slot is as you did it, and the clamp comes loose, There Goes the Real.

[@imzardoz]

Yes, and a zip tie would look better than a hose clamp. Nice video.

[@markstuff681]

that's defiantly a great idea! however the method I chose is still very strong and I cant see it failing anytime soon.

[@itechhen]

@@imzardoz I disagree in that a zip tie would need to be cut every time in the event one wants to swap out the reel.

[@itechhen]

@@markstuff681 I have to agree with archersfriend. Heck, you didn't get to this stage without making several refinements/improvements along the way and there's no harm in improving the design.

[@itechhen]

@@markstuff681 additionally, I want to add another suggestion. Give the option of the L shaped portion to be removable. Maybe via pipe adaptor, I dunno? One issue to consider is to put the bend in it after the adaptor and then that whole part of the setup is modular without compromise(won't have to worry about it yanking loose by accident) in the event the reel gets a fair amount of tension from pulling on the line. The slingbow remains sleek and portable and you can then target practice in the backyard or hunt other game without all the extra bulk or slap in the bottom half when your ready for some fishing.

[@Newsky79]

Don't forget to push the button for slack before you fire or else the arrow has nowhere to go but backwards into your face and you die. Which is why this isn't a product on the market already :)

[@gavincaesar3999]

Once it's nice and hard you want to grab it with your hand and get a good grip on it. "Is anyone else feel like it's hot in here? It's got to be like 91 in here."

[@RyanGr33n]

Worst sling bow diy I’ve ever seen. This Is an injury waiting to happen.

[@draculaalucard3556]

Wow powerul slingbow

[@alexs5969]

Nice mate, reminds me of your old videos when i first subscribed many years ago. Also have you still got that old Hilux Surf mate? She was a beauty

[@markstuff681]

thanks mate! lots of awesome videos coming soon! and I actually don't have the surf anymore mate I had to sell her in the end

[@alexs5969]

Sounds good mate and damn thats unfortunate, did you get another fourbey to replace her?

[@markstuff681]

@@alexs5969 got a hilux now mate 2018

[@alexs5969]

@@markstuff681 oh awesome, can't go wrong with a Toyota mate

[@markstuff681]

@@alexs5969 Toyota all the way!

[@manuelsuarez5004]

well explain and easy diy info thanks from the philippines

[@mohamadnasriomar6165]

Terimakasih bro,,salam persaudaraan dari malaysia 🙏🙏🙏

[@carlosvassel]

Excelente video gracias

[@jodybubner3285]

Instead of using pvc,im thinkin aluminum piping,and id go for screws/rivets to fasten components together....

[@justinwilliams9452]

You should change your name to ,Max Johnson.

[@Gunsnstuff2002]

I can't find any good tubes can anyone recommend some?

[@xXxtoodeeepxXx]

Once it's nice a hard you want to grab it with your hand

[@eusebiogonzagapescacomesti6279]

Sou mais um inscrito aqui no canal

[@hayrullahakdogan2663]

Bravo kardeşim🤗

[@sanman187-]

Have you ever caught a fish with this rig? Great video, you're pretty creative. Many years ago, I was a national class archer and I still like to fish. I'd really like to see a video of you catching a fish with this rig!!!

[@derickwilliams2195]

What a great project you here. There is just under 2 years later so please tell me if you were successful in shooting any fish? Also thank you for posting this. Take care and God Bless 🧡

[@1MRRICHARD]

Badass bro... I'm definitely gonna make some I tried the link for the rubber something wrong with link can you send me accurate link thanks bro? 😉🤙

[@meloboyumali6565]

Nice bro 👍

[@dustinowens5604]

Hey for your fishing Arrow try a field tip with a safety pin it is spring steel cut to desired size I use 1&1/4 inch with a slight bend toward the fetching.. nice video I am making one like you did but I'm going to put a threade cap to store extra items in the tube. P.S. KEEP UP YOUR DESIRE TO MAKE AND INNOVATE

[@itechhen]

The Amazon links don't work for me, I'm in the States. Not sure if that has anything to do with it

[@norea5on]

Ever made your own arrows?

[@markstuff681]

have made arrows before, just never made a fishing arrow, might have to give it a go

[@norea5on]

Yer noice 👍

[@merpyboitv]

@@markstuff681 yes please i really want a fishing arrow tutorial

[@Just4Ever]

Just subbed. Love your ingenuity!

[@markstuff681]

thanks mate! lots more stuff coming soon, if u have any ideas please let me know

[@slingshotwarrrior8105]

Awesome fishing frame bro!

[@markstuff681]

thanks bro!

[@milkdud567]

Man that’s awesome very impressive 👏🏿🏆

[@kellisongalewski3711]

Nice build but no way in total it only 10$ especially the real

[@songsakkaimuk2059]

😮

[@aaronhenderson8502]

Thank you you saved me alot of money

[@randyensminger6682]

Great Video

[@markstuff681]

thanks mate

[@justinhorn4246]

You are quite talented and have inspired me to try it out. I've always wanted to bow fish bc I like the challenges but sling fishing seems like a better way to go. Do you have to have a bow fishing reel or can you use a regular fishing reel?

[@dustinowens5604]

Regular one is fine I use a ultralight with 6lb test

[@اللهربي-ر3ش]

Very simple.. Very nice 👍

[@djkickmycobra5557]

Wicked!

[@markstuff681]

glad I could help!

[@mattye880]

Awesome stuff hope there's a video of you catching a fish with it

[@markstuff681]

defiantly will be soon! as soon as I get a chance to take the boat or the ski out

[@dapitmanik5232]

mantap

[@brucehawj3306]

Very nice

[@hectorskis]

what are the name of the rubber to buy or where to buy

[@markstuff681]

links in description

[@alessandropescaestilinguep5194]

Top demais

[@litahsr.8226]

PVC size? ~ oh yeah looks awesome ~ any updates on it?

[@dustinowens5604]

It look like it used inch and 3/4. And I'm building one right now. But at the end he left it open. I'm putting a screw-on cap. So I can hold extra items.

[@litahsr.8226]

@@dustinowens5604 yeah thats what i'm gonna do with the cap too, it would look much better also can put some extra steel balls ammo in it for other things. And one more thing gonna make something for the arrow to hold it underneath

[@natureboy6410]

Can any closed faced reel be used???

[@markstuff681]

Yes mate!