MAKE A CUTAWAY BRIGGS ENGINE

[@WillSmithHitandMiss]

Very neat idea and work !! I hope you have been well 🤠

[@805ROADKING]

Thanks Willie!! Life is good!!☻

[@ScoutCrafter]

This might be one of my favorite projects you did! Absolutely fantastic!!! The attention to detail on this is incredible. 😃👍

[@805ROADKING]

Thanks Mate!! I'll let you play with it at Jacktown if you promise not to stick your fingers in anything!!☻

[@enpeemac]

You made this seem so trivial and matter of fact, but I know that it is in fact really hard to pull off for everything to look right; and you nailed it! I reckon Briggs and Stratton themselves would've been happy to have used this as a promotional back in the day. Top job fella!

[@805ROADKING]

Thank you Mac!!☻

[@patcb829]

Nearly every bit of plumbing I know I learned from a cutaway done by Richard Trethewey on this old house. They are great display pieces.

[@805ROADKING]

Yeah Buddy!! I remember the cutaway Toilet he use to use!!☻

[@357magdad]

Wow! It even sparks! The kids are gonna have to get in line behind me at Jacktown!

[@805ROADKING]

Thanks Buddy!! We'll get you a VIP pass, you won't have to worry about any Snotty Nose Kids!!☻

[@geobrown9413]

Same thought here too! As a added benefit you could use it to test those pesky ignition coils, always a PITA to accurately test.

[@nashguy207]

Great Ideal. I think it turned out real nice. Hopes it entertains and teaches a lot of kids at shows!

[@805ROADKING]

Thanks Bob!!☻

[@mattdomenic4814]

You know as cheap as the predators are it would be great to cut one of them up for comparison. I remember wishing we had OHV ‘s in the 80’s running go karts. Awesome Job Road King!

[@805ROADKING]

Thanks Matt!!☻

[@larrycarlston4044]

You did a nice job of cutting it apart. Harold approves!!

[@805ROADKING]

Thank you Harold!!☻

[@Tromador]

I'm an adult and I know how it works, but I would still have a ton of fun playing with that. What a cool toy.

[@805ROADKING]

Thanks Mate!!☻

[@CalPil0t]

Glad you saved that gas tank. A more suitable one to cut away will turn up.

[@doublel7337]

You did a nice job on this one RK. I believe the compression is a little low now, but I bet this engine is going to get a lot of attention at the shows.

[@805ROADKING]

Thank you LL!!☻

[@SuperRon]

Can only imagine the hours that went into that. Great job!

[@805ROADKING]

Thanks Ron!!☻

[@larrydavidson3402]

That was done very nice. Like the idea you left the shroud on.

[@805ROADKING]

Thank you Larry!!☻

[@Jason1Pa]

Way cool!! I've always liked cutway stuff. It can really be educational!! And this is the only one I've ever seen spark!!

[@805ROADKING]

Thanks Jason!!☻

[@stephensmith1779]

That is pretty nice. The kids will love it.

[@805ROADKING]

Thanks Stephen!!☻

[@crx_ninja]

That is the nicest cutaway Briggs I seen, thank you for sharing !

[@805ROADKING]

Thank you Ninja!!☻

[@MadStiles]

Awesome project buddy looks great!

[@805ROADKING]

Thanks Bud!!☻

[@kcraig51]

Cutting the flywheel as to preserve the ignition was a great touch. Even at cranking RPM the piston was blurred. I still can't wrap my mind around how engines (especially racing) operate with any power at all at 7-8000 RPM. Everything happens so fast!

[@805ROADKING]

Thanks Keith!!☻

[@rcspud4648]

I've always wanted to make a cut away. Great job.

[@805ROADKING]

Thanks Spud!!☻

[@donaldhalls2189]

Good little project, maybe with a slow electric motor to turn the engine slowly, might be able to see thing's a bit better, great job, thanks for sharing, all the best to you and your loved ones

[@805ROADKING]

Thank you Donald!! I agree with you, I've always enjoyed watching the ones that move by themselves!! It would probably draw more attention also!! I've been looking for a lil' low RPM motor, something we could put a speed adjustment on!!☻

[@TheTrueVoiceOfReason]

@805ROADKING you might find something you like in a gear reduction motor over at Skylab Surplus. Make up a PWM controller or a pre-built ESC and you'd be the hit of the shows.

[@danthompson4879]

Brother RK, Great movie!!

[@805ROADKING]

Thanks Dan'l!!☻

[@Cookiegrabber-]

Love it!!! Well done RK! Things like this spark an interest in young minds, and turns them on to the need for mechanical knowledge. Thank you!

[@805ROADKING]

Thanks Cookie!!☻

[@ihus9950]

Great job RK, kids will certainly get a thrill looking and pull starting on it.👍🏻

[@805ROADKING]

Thanks Bruce!!☻

[@RustyGlovebox]

I think that came out really good. Folks at the shows will get a kick out of that cut away. Nice work Buddy

[@805ROADKING]

Thank you Lloyd!!☻

[@mr1pearl]

The kids are gonna love it me I ain't gonna sleep tonight , oh gloom despair and agony on me 😶

[@ziggassedup]

Cool...I've been wanting to make one like that...Cheers RK.

[@805ROADKING]

Thanks Mate!! You'd have to make one outta a V8!!☻

[@ChuckKirchner-se6ib]

That's pretty neat, but without the rings, you'll never develop any compression. I bet the kids will have a blast!!

[@Scodiddly]

Nice job, that engine looks great! Really neat to see how all the parts interact. I bet if you loaned it to Mike he'd get it running, too! 😆

[@805ROADKING]

Thanks Diddly!! You're absolutely right!! If anybody could get that thing to run it would be Mike!!☻

[@thomasadrian9854]

RK- your skills never cease to amaze me!! That cutaway B&S is too cool!!

[@805ROADKING]

Thank you Tom!!☻

[@aussiedazvk4djh889]

A bit more chock it might start. 😉

[@desmondauffrey7823]

That's sweet, usually i'd be unhappy about someone making a briggs never run again but this is an exception ! Great Job !!

[@TheTrueVoiceOfReason]

Art in Engineering. Well done, RK!

[@805ROADKING]

Thanks Bud!!☻

[@jimamccracken5783]

Everett, This is one reason subscribers like you so much. You are very interested in people learning. So this is a very EDU MA CATIONAL Tool. Briggs like the Model T Ford engine SIMPLICITY of design and is easy to work on.

[@805ROADKING]

Thank you Mac!!☻

[@jaxking1684]

Try heating piston rings in the closed position so you can also have rings on the piston.

[@victorbitter583]

Very schmic RK. Nice professional job on that one mate. cheers.

[@805ROADKING]

Thank you Mate!!☻

[@MissouriOldTimer]

that is a great job, it shows how everything works, I doubt if I could have done nearly as good on this project. by the way, it's not only kids that don't have an idea as to how these engines work.

[@805ROADKING]

Thanks alot Vern!!☻

[@combatmedic1980]

Nice job, the kids should enjoy looking at the workings of a small 4 stroke gas engine

[@805ROADKING]

Thanks Matt!!☻

[@steveparker8723]

Wow, very nice job.

[@805ROADKING]

Thanks you Steve!!☻

[@Guns_N_Gears]

Looks fantastic RK!!

[@805ROADKING]

Thanks GNG!!☻

[@Guns_N_Gears]

@@805ROADKING Yea buddy👍👍

[@chriholt]

Very cool project, and well-done! I would have loved to see you cut the block and other pieces. What did you cut them with?

[@805ROADKING]

Thank you Chris!! We cut it with the Band Saw!!☻

[@georgedonner7478]

Fantastic model! Cool demonstration piece!

[@MattBrownbill]

So good. I always admire these in museums. Quad-cam V16 next? 😂

[@liljoeii6091]

Awesome job on the Cutaway thank you for the video

[@805ROADKING]

Thank you Lil' Joe!!☻

[@datnis916]

F that I'm 40. I want it lol

[@ronaldbrown5745]

The cut-away shows that the oil level is critical in this style system!

[@Turningwrenches85]

Nice work on the cutway engine RK i love it 🔧

[@Jim-ie6uf]

Ahhhgggghhh😆 Nice job

[@805ROADKING]

Thanks Jim!!☻

[@mattthescrapwhisperer]

Yup, you had good spark.

[@TerryLawrence001]

Updating a Briggs to the new zero carbon emission standards?

[@mumfordalien1794]

Have you seen the cutaway centurion tank on The Tank Museums channel? It’s amazing, this made me think of that. Super cool stuff

[@805ROADKING]

Nah, haven't seen that!! We'll have to check it out!!☻

[@lar4305]

I bet if you poured fuel in it , the engine would start right up, that's how good the Briggs engines are 😃

[@twocvbloke]

I think that engine might have compression issues... :P

[@richardellis3141]

very nice work.

[@805ROADKING]

Thank you Rich!!☻

[@johammer3300]

What did you use to cut it?

[@Mad-Duk_Machine_Werkes]

I wonder, does everybody make them different?

[@txsviking]

I don't think I can weld that back together. lol

[@805ROADKING]

I don't know!! I wouldn't bet against the Texas Viking!!☻

[@melchristian8876]

👍👍

[@805ROADKING]

Thanks Buddy!! ☻