Make a Gold leaf tool kit. Cost of living special

In this video I make a gold leaf tool kit for less than £10
If you'd like to support the channel with a one off donation, you can use the 'Buy Me A Coffee' link below
www.buymeacoff...
If you'd like to support the channel and receive monthly bonus content, you can subscribe to my Patreon using the link below
www.patreon.co...
For Happy Gilder merchandise please check out my shop: happy-gilder.m...
For thousands of customizable logos check out Kittl: kittl.pxf.io/Q...
For design templates, full artworks and vector patterns, please check out my Etsy store:
www.etsy.com/u...
Happy Gilder Facebook group: / 885469372033249
Heritage Crafts: heritagecrafts...
Link to Dave Smith gilding course: davidadriansmi...
To see more videos like; 'Gold leaf tool kit', please subscribe to my channel and click the bell to be informed of new video releases
Music by: bensound.com
Gold leaf tool kit

[@prakashspex]

By far the best source on these subjects one can find on KZbin, thank you so much for all your videos. You are awesome !

[@happygilder]

Thanks very much!!

[@esmegemini9257]

This is amazing. Made my evening finding you. Starting a new job after being off for a bit and so much to buy... Seeing this has made me feel like I could make a few bits like the pad. Think I'd need to make a guard aswell but honestly food for thought ❤

[@jjbode1]

So many thanks for the project tip. 33:28

[@happygilder]

You're welcome! :)

[@Greymalkin-]

Thank you so much! I've been saving to buy a kit for ages, and I don't know why I never thought that I could make a gilders cushion myself. I have a tip for raised illumination, which is a piece of thin plastic stapled to a piece of cardboard, and it works brilliantly. Not sure how it would work on a larger scale for a full leaf, but great for smaller pieces.

[@chiparooo]

I was surprised that some of these tools could be made at home. It is an expensive hobby and anything that can be done to lower the barrier to entry is welcomed. Thanks for sharing!

[@happygilder]

Cheers Chip!!

[@RichardThompsonCA]

Thanks for this, I've recently started collecting the tools to try this out, but most of the stuff is quite expensive here in Canada. Cheers!

[@happygilder]

No worries Richard, glad you enjoyed it!!

[@Swisshots]

Thanks for the great démonstration that a good result doesn’t necessairly depend of expensives tools ! Have you got a cheap way to build a heat table for glue chipping too please ? Thanks for your vidéos that are my number one reference for this beautifull hobby.

[@happygilder]

Thanks, I'm glad you found it useful! I now use tube heaters for glue chipping. The kind you use in a greenhouse. They're really cheap and more importantly they only cost 1p per hour to run.

[@Swisshots]

@@happygilder thank you for the information. Do you have any picture of it please ? I’m note un UK but in Switzerland. I regret that I closed my FB account after 10 years in because I would have come in your community. Does it exist an another way to cet in without FB ? Thank you very much for your Channel.

[@Swisshots]

Hello. Thank you. Can you make a shortvideo of your instalation with your tube heater for glue chipping ? @@happygilder

[@airbrushken5339]

Mate, I used to do a lot of pin stripping and gold leaf work starting in the 1960's .... I always took my "French" Quills and my pin stripping brushes, clean in a jar with a coiled spring in the bottom and thinners. Then really pack the the hairs with vaseline petroleum jelly. To my surprise I hadn't used the quills (I had new sign writer's brushes) since about 1984 ... I found the tin box with them, cleaned them,re-oiled them with linseed oil... cleaned again and they worked like new.... what I'm saying , if you spend the big dollars on good equipment, take the time to treat and maintain them... they'll last you a life time.. You as always put out some clever idea mate....thanks

[@happygilder]

Cheers Ken! I completely agree mate and I think the tools I made in this video will last just as long as the ones you can buy for nearly 10 times the price. Hope you're still enjoying the sun. It's getting better here now so I'm perking up a bit :)

[@alansm136]

Super awesome Paul. Fantastic.

[@happygilder]

Thanks Alan!

[@heidihein8662]

Excellent advice! My dad taught us to make whatever we need - as much as possible. Regarding your water size: It's steaming for the first gold leaf application … like a hot cup of coffee? Is the heat necessary - did you reheat it for the second layer of gold leaf?

[@happygilder]

Thanks Heidi! A hot cup of coffee is the perfect temperature to get the size mix too. Just before boiling point. I don't reheat size but you can use it for a few hours until you need a new batch. It doesn't need to be hot to use, just to dissolve the gelatin :)

[@charlesspurlock1746]

Always look forward to your videos. Love the work been following for a while.

[@happygilder]

Thanks Charles!!

[@terrybusby470]

Truly inspiring and motivational, definitely making the burnisher. I've recently bought the other bits. Bugger.

[@happygilder]

Thanks Terry!! 🙏

[@simplebbq3665]

Great video. 👍 keep em coming . Ill be trying the full sheet applicator.

[@ktyty1244]

Very helpful, Paul, thank you!

[@happygilder]

Glad it was helpful!

[@tonjansenartstudio310]

Another great vid Paul some great tips !!

[@happygilder]

Thanks Ton!!

[@mcfeally1]

Good video Paul I dig it

[@happygilder]

Cheers Tim!

[@russiankub]

Отличная работа! 👍

[@freddiemoses467]

Hey Happy Guilder. Hope my comment finds you well. I wanted to ask a couple of questions - what difference does the sand blasting do to the glass before you gold leaf it? Does it texture it? I would like to make a mosaic with gold backed glass for a project....can you glue the glass onto a backing after you have gold leafed them or will they debond due to the leaf? Many thanks!

[@happygilder]

Hi Freddie, if you want to gild sandblasted glass you’ll need to apply a clear gloss lacquer first because gold won’t stick to etched glass. After gilding you should back the leaf up with sign writing enamel and then it’ll be fine to glue to something :)

[@freddiemoses467]

@@happygilder That's fantastic - thanks for the tips!

[@johnhayes6414]

where do you get a stand for the glass work your working on

[@happygilder]

Hi John, it's a laptop stand. Perfect for small glass pieces

[@modology]

Great video. I am learning a lot from watching your videos. I recently have a fluted glass door which I would like to do reverse glass wih gold leaf. But the issue is due fluted glass, the surface of the glass is not flat at all thus make it seems to be impossible to do reverse glass sign.... Do you have any advices when it comes to fluted glass?

[@happygilder]

Thanks, I'm glad you're finding the vids helpful! I've never worked with fluted glass. The gold should go on without any problems, but painting a design onto it will be tricky. Sorry I can't offer any useful advice on this

[@Sky34official]

May ı ask what thickness the gilders cushion leather must be? mm?

[@cliffnelson1174]

I have a hard time hearing your narration....can you boost your mic a little bit? I checked my phone and it seems to be on your end....

[@happygilder]

Sorry Cliff. When I boost the mic in Premier Pro the sound breaks up. It's a problem with the camera I use but I can't afford to replace it at the moment