Make A Jigsaw Guide Track || DIY Jigsaw Straight And Crosscut Jig

[@xpendable6172]

I have been cutting stuff with my jigsaw for years, and over the past 1 1/2 years, have made a ton of cuts for a replica AV-8B Harrier cockpit I am making. I just stumbled on this video today and literally just made this tool after watching it. Why didn't I discover this 2 years ago! Anyway, thanks for the video. This is awesome!

[@user-gq1hp2fi9r]

Ваша идея мне очень помогла. Она оригинально. Хотя могло бы ещё что то и доработать .например как в торцевой пиле. Ставлю 👍👍👍👍👍

[@dr4jm]

Thank you for not using the bench saw. Most of the DIY guides almost always uses a bench saw. The very reason I need a jig saw guide is because I don't have a bench saw!

[@Tom-Travels]

Hey. I saw this video today and I popped out to my shop and made one. THANKS! Your gift content keeps on giving. I did make mine 48" long. I should have stopped at maybe 38 inches long. That way It can be flipped around and would fit better in my service truck better.

[@photographywithdarshana]

👍👍👍 Grate Video

[@ChargedPulsar]

I have learned much, thank you for the video!

[@lowrads3653]

I definitely like the miter backstop for workpieces as well as the built-in 45 degree guide, but I would want to add some dust ports to prevent the saw from riding up. Also, some 30 and 60 degree guides could be used to reduce overall weight. A composite of thinner ply and lexan would help support the work at the observation ports. Perhaps another reasonable iteration would be to mount the backstop on knob bolts so it could be expanded for the height of the workpiece.

[@CYMotorsport]

where would you put the lexan? i like this idea.. and have a lot of lexan haha but want to make sure I understand where you are talking

[@ironzene]

A good tool for jigsaw. Thank you for sharing

[@antoinepampalone6124]

bravo l'artiste 👍🙏

[@bigviper64]

I like your “Drill-Sander!”...gonna try and make me one of those!

[@Мастерскаяхолоднокованыхиздели]

Идея просто супер 👍

[@SMWChanel]

Perfect job friend 👍👍👍

[@leksey7870]

It turns out well, a useful thing in the workshop!

[@abalaguamit2731]

I prefer your idea! Compared to other youtubers' jigsaw guide, yours is simple, and most important, it can be used to cut long boards which won'T fit others' guide.

[@klemorxhannel8116]

What for?

[@amarojose8292]

@@klemorxhannel8116 ppp

[@Miguel_Molina]

jesus christ. is this what becoming an old dad is like? how excited i am to make this?

[@jesshasnofilter]

I'm an old mom. I think it's just old.

[@klemorxhannel8116]

I believe this is work without missing out of the line 👍👍👍

[@lacorona21ink]

Good work🤘📲

[@nardaoeletronica]

Excellent work

[@АлексейД-о5г]

Хорошая задумка!

[@user-vf2uf1kv8d]

Thanks.. The best till now.. I will try it.. :

Very good. Thank video and you

[@CreativeBoss1]

Amazing... Dont stop drilling... 😁👍

[@FamilyRoots]

Nice work 👍

[@DuongNguyen-gg3uc]

T-Tracks can be another option for guide rails.

[@ariyanadumon4549]

This is too cool man. Nicely done. 😁

[@devdattatrivedi9904]

Great work. Thank you Mr.Mistry bhai.

[@pavelbaranov8360]

Super! I have added it to favourites!👍

[@МолотВенков]

Подписка однозначно 👍👉🏻🔔

[@AswWibawachannel]

Wow amazing👍🏼

[@vamsikrishna7550]

You made it very easy and simple. Make video about tailoring table

[@mikedwn]

made a quick rough one just for starters...works! thanks for that !

[@Kai77884]

Hello very cool perfect 👍👍👍from Germany 🇩🇪 👋👋👋 Kai

[@MuhammadDaudkhanTV100]

Great full ideas.

[@alex.h.870]

Very good idea, nice work!!!

[@nissanzargari]

Perfect job bro ,weldone

[@marceloandriolo819]

Very good, i will make one for me, thank's

[@electronic7979]

Very good

[@MaBuKunsthandwerk]

Very nice 👍👍👍

[@husseinkushish2534]

Nice work

[@drazkjourney-jpr]

Thanks for this bro

[@mohankrishnasamy1456]

Well done

so beautiful & convenient ... good health to produce many useful videos for everyone to watch and support

[@joeredman8161]

15 mins of my life I will never get back!

[@arifchannelA]

Big like

[@youtukang]

Nice 🥰🥰

[@MuhammadDaudkhanTV100]

Super

[@barryparks9410]

Brilliant! !

[@elye3701]

Lovely.

[@lampucoklat]

Nice tutorial 👍

[@papalevies]

I did the same mistake, in fact my jig is almost identical to yours but unfortunately jigsaws just don't cut straight since the blade bends. If I would do it again I would use a circular saw.

[@manpreetsingh46]

if you let the jig saw move on its own with very little pressure the blade wont bend

[@peterdyer3337]

@@manpreetsingh46 quite rightly said

[@cdimas7324]

exactly, there comes a time when the saw bends and the cut comes out of alignment. I don't know how to fix it

[@russman1958]

Great craftsmanship! That’s a whole Lotta work to cut a line with a jigsaw but it looks great. I guess if you use a jigsaw a lot would be practical. I think you would get a much straighter cut with a circular saw and a straight edge. Jigsaw blades has some waiver to it when you cut. Very nice jig though! like I said if I needed a jig made I would hire you to do it 👍

[@Zealous_Tutorials]

This is perfect if you're on a tight budget. With a drill and jig saw you can actually do alot of work

[@alfredoeval550]

great jod en ideas

[@dimipartcaster7770]

I watched a couple of tutorial videos but I couldn't understand the point of the holes in the guide. I mean this 4:33 What's the reason of this? It couldn't be only the straight line, so the blabe can running through? Why the blade has to cross from the holes? Thanks in advance and also very nice job!

[@jasonryanbenitez870]

to easily see if the blade and the line that the material to be sawed is still in allignment

[@MuhammadDaudkhanTV100]

Sweet dreams and cool content

[@raphaelcamacho5699]

It would be amazing for you to make the same jig, but with clear acrylic so that one can visibly observe the cut line .

[@blackwater7183]

Great Idea.

[@marcospaullus]

A linha de corte fica visível pelos círculos ao longo do caminho da lâmina.

[@IceXiao]

you cut straight enough already i don't think you even need this...

[@wolfman75]

Cool Idea!!! Nice Job!!! Thank You Sir!!! 👍😎

[@SALIMTECH96]

Nice

[@lefthanddiy9226]

That's a brilliant project no question on that, but Don't you think it's a bit hard to see the marked line. I am also thinking of making something alike but first need to have solution for this too I also guess are those big holes are for the that.

[@jeffbassett3174]

Like? I love this video. I will make this so I can uise it on my current project.

[@manfredmeier1500]

Great 👍🏻

[@forestlampcraft472]

COOL!!!!

[@rodrigoandrade862]

Muito bom amigo!!! Salve Brasil !!!💪💪💪

[@TheDudeAbides-247]

Nice jig, especially if you don't have a miter saw to make these cuts. A jigsaw and a scroll saw are different tools, though.

[@mastercell14]

goog, good

[@wcartaya]

I am trying to build the cutting station for the jigsaw, but after having the pieces assembled I try to make the cut in the table that will serve as a guide and the blade is twisted to one side and the cut is not straight, making a curve. (I used 15mm pdf) Any idea why this might be happening?

[@victormarland9871]

I think I'll make a long one of these, but have a movable end stop (with dowels and wing nuts) to allow for shorter pieces where space may be tight. Thanks!

[@Lannd84]

Those hairy hands shows that you are a true craftsman.

[@StarCoreSE]

This man loves screws !!

[@blodstopp46]

Very nice and Creative. Real inspiration 👍🏻

[@imashish86]

This is neat

[@barry-cq4xg]

great stuff.

[@essamkassem2993]

Hello very good

[@UlisesUlises-xc6wp]

Awesome!!!!

[@평경장-지티원장]

천재다

[@manofpower]

Good...

[@HOBBYDANREJEKI]

Perfect

[@pandaypira4346]

Now i need to build an 8 ft guide.

[@chpaba]

super

[@rockeysingh8841]

How do see the lines to be cut when you place the jigsaw runners /track over the pieces to be cut?

[@AmirVD_027]

Its has hole

[@hierkonntemeinnamestehen2772]

Gefällt mir gut. Gibt es Pläne dafür?

[@romilsonsoares1199]

Show (Brasil)

[@wittgal382]

It is not necessary to hold it all with your hand, you can fix it with a clamp, right? but the device is efficient. 👍

[@rawaniajay]

उत्तम।

[@youtukang]

🙏☕☕🤝

[@uMpzZ26e03]

Whenever I use a jigsaw and ruler to support one side of jigsaw foot, or a guide supporting both sides of jigsaw foot, I get inuppropriate results, the blade goes under angle. From my experience consequently, both types of jigs are inappropriate for jigsaw, at least for mine. I have green Bosch jigsaw. I measured the foot and blade angle with inclinometer, and they seem to be parallel say less then 0.2° mismatch, quite close. The blade is 20tpi, the reciprocial move is turned off, everything in order, but the jigs tested generally unusable. I do not advise making these, either with one or with two supporting sides. Only hand guidence of jigsaw should be practiced, or making blade guidance with two ball bearings to keep the blade perpendicular.

[@valtersouzaribeiroribeiro9534]

Good good

[@rliy001]

Some say he's still in the workshop making the guide

[@sergey31rus20]

👍👍👍

[@9AMITkrYADAV]

Nice job by d way which Country?

[@joaoluis1744]

ta muito fixe

[@pedroesteves6857]

Please tell me watt is the mesures 😊

[@Prakash-nf8xh]

👌🦅👌

[@mikedwn]

what wood panels are you using?

[@mohamedmotala8880]

Why’s your machine so slow?

[@milkod2001]

This us great but it might be better to just get some table saw under 200.

[@imatrohimat2256]

Can you put design & size your track guide on your description please... Thanks

[@benbena2061]

Good idea...but, Very very cut slowlyyyy

[@Wheel333]

🙏❤️🙏

[@shuckyducky3508]

It's called buy a table saw.!!

[@firstinstyven3023]

I have visit your website, do you have CAD plan design of your work?