Make a Super-Bright 10 Watt LED Task Lamp w/ Third Hand Soldering Holder

Using walnut and 6 mm aluminium w/ a 10 watt LED bulb I create a task lamp for my electronics table that also features a set of third hands.
Where to purchase the parts - (Affiliate links)
10 watt LED - amzn.to/2LDfZ4u
Voltage Booster - amzn.to/1Id5roA
Power Pig Tails - amzn.to/1Id5FMe
Thermal Adhesive - amzn.to/1PQItWU
Toogle Swtiches - amzn.to/1Id5IrC
12 Volt Power Supply - amzn.to/1PQKiTM
Aluminium Rods - amzn.to/1Id8RaJ
Aluminium Plate - inventables.com
Check out the shoppe: darbinorvar.com
Become a patron: / darbinorvar
Mailing Address:
Darbin Orvar
PO BOX 1101
Goochland, VA 23063
How to find Linn @ Darbin Orvar
/ darbinorvar
/ darbinnotes - My Second Channel
/ darbinorvar
/ darbinorvar
Easel Files & Inventables
www.inventables.com/projects/...
inventables.com

[@thedr00]

Metalwork, wood work, CAD/CAM, electronics, aesthetics, functionality. Incredible, really incredible.

[@Purple420Stank]

MUY buena calidad, el texto imagenes. kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO Un manuel muy completo y trabajado. Resulta muy práctico. Para principiantes y profesionales. Lo recomiendo

[@johnstrange6799]

This is exactly what I meant when I envisioned the possibilities of specific tasks in regards to your previous desk lamp block build - Love it.

[@darbinorvar]

+John Strange Thanks John!

[@exectech]

Quality work, Lynn! The light is great, the base is great, but what I really was interested in was the third hand clips. Most 3rd hand tools don't hold in place well at all, so I've been looking for good ideas on how to make the arms. Having them able to pop in and out of the base is real good too. Thanks.

[@sparkyprojects]

Thanks for motivating me Over the few years i've had a third hand (mananged for over 40 years without one), i've been wanting to change it around because it was sometimes awkward for holding wires for soldering, but kept putting it off because i wasn't sure any of my ideas would work, i was basing it around the original base, your use of a larger wood base was what i needed. My version isn't pretty, but it's now more functional

[@darbinorvar]

+Sparky Projects Thanks for watching!

[@hyqhyp]

Just showed this vid to my daughter. She loves it!

[@farshadrabbani4898]

Linn, I bet if you produced a couple of these and sold them on Amazon, they would sell out quite quickly. These are high quality.

[@PainCreator]

What a neat design! A solved light problems using cheap ikea aluminium frying pan(as heatsink and cover) and 6x 10W 12V leds, with cheap notebook adapter as power source. I've used tap and die(M3) directly into pan to hold the leds in place. My design looks "how ya do 'in" a little bit. Thanks for your video. Oh and I probably fell in love again! (to creep it up a little bit)

[@AndreaArzensek]

The combination of walnut and aluminum is just spot on! Beautiful work Linn!

[@darbinorvar]

+Andrea Arzensek Thanks Andrea!

[@ThePostApocalypticInventor]

Gorgeous! If you keep making these fancy little gadgets, I guess your electronics area is going to be one of the most unique and good looking ones in existence! I really like your creative approach and the combination of aesthetics and functionality! PS: I envy you for that CNC-machine and all those modern tools. I feel like an old man, because all I have is like from the 50s :D

[@darbinorvar]

+The Post Apocalyptic Inventor Thanks so much for the nice comment! I really like to have nice things around and modern tools help :)

[@beanhole69]

Really cool project. The walnut and aluminum is a beautiful contrast. Great work, lady!

[@darbinorvar]

+BeanHole Thanks!

[@69virgin1966]

Linn that looks absolutely fantastic. I especially like the way the tongue-oil and beeswax makes the grain of the walnut stand out. The signature on the bottom adds a touch of class. lol Take care and be safe. Thanks for sharing Roy

[@darbinorvar]

+Roy Wrenn Thanks Roy!

[@dka0700]

Yes Linn, very nice work. Most impressed with your range of knowledge & level of workmanship. Mind you, a military grade precision soldering instructor would have a heart attack at the condition of your soldering iron, however guess it works for this kind of project. Anyway, truly a pleasure to watch. Thank you.

[@darbinorvar]

+dka0700 Thanks for watching!

[@SparrowHawk183]

Such a cool project! I'm really inspired by this build, and all your others. Now I'm thinking of how to use this in my shop/tinker hideout. Thanks Linn!!!

[@darbinorvar]

+SparrowHawk183 Thank you!

[@karlish8799]

Nice work! Looks really useful :), that piece of walnut you used for the base is gorgeous.

[@CJWarlock]

Now THAT'S the best soldering third hand I've ever seen! It looks high quality, sturdy, stable and robust. The arms don't wiggle like in all the other such projects I've seen until now. Congratulations on the idea and its execution with attention to details. I respect such thoughtfulness and work. No need to watch more, I've decided already: subscribe. :) PS.Have you thought about selling this item as a kit or ready-to-use product for those who need a high quality third hand and don't have time or possibility to make one?

[@teddycheung9552]

the most beautiful solder station I have ever seen

[@dirkjanvanvliet]

Hey Linn! I like what you are doing here on youtube, thanks for the inspiration and instructions for things! And maybe a little tip for you. I saw you were drilling the aluminum dry, and aluminum is kinda sticky. Most of the times it helps to put some spirit (you know, the blue stinky burning liquid) on your drill and workpiece. A little WD-40 helps also. Keep it up!

[@incorrect1844]

Subscribed! Lady and tools love it! Wish me gf could change the lightbulb without winging lol Respect

[@lehcim777]

Love the fact that you used wood in an electronic project, very elegant, I will try to do one too, the only other option I will add is a built in fan in the base to suck out the fumes. Will send picture when done, you inspire me.

[@darbinorvar]

+Michel Brunette Thanks Michel! I did not add a fume extractor because I made one in an earlier video. kzbin.info/www/bejne/bKeqfYKtbL1ljtE

[@irakopilow9223]

Fantastic build. I was almost to the point where I was going to suggest adding a magnifying glass, but it looks like you read minds too! I am always impressed with your creativity.

[@darbinorvar]

+Ira Kopilow Thanks for watching Ira!

[@birdsadventuresinwoodandmusic]

Very Nice! There may be one in my future lol! I just started my own wood channel and am gaining quite an appreciation for those of you who get a new vid out each week. I've enjoyed many of yours and I've picked up a few tips while watching. Thanks!!

[@darbinorvar]

+BirdsAdventuresInWoodworking Good luck and thanks for watching!

[@homesteadonomics]

Love the holding arms you made... look great and super functional as well! Joe

[@darbinorvar]

+homesteadonomics Thanks Joe!

[@neogain]

Awesome! Best third hand tool i ever seen! Gives me an idea to make my own... Thanks, Lynn.

[@darbinorvar]

+neogain Thank you!

[@stepcorngrumbleteats7683]

Thanks for a gorgeous project, and for the inspiration. I have a slab of Walnut, some brass plate and several pieces of Ebony I'll use for mine. Great idea !

[@darbinorvar]

+StepCorn Grumbleteats Thanks and send me a photo or tag me on instagram if you make one!

[@stepcorngrumbleteats7683]

Will Do !

[@Jer_Schmidt]

Very nice! It looks very finished. As you said the aluminum and walnut contrast beautifully!

[@darbinorvar]

+Jer's Woodshop Thanks Jeremy!

[@right.howdoimakethat6519]

Ah! I've been meaning to buy my own 3rd hand stand, but after seeing this, maybe I'll buy my own. Thought I might share that I like to use 12v halo (or ring) LED lights for this type of application. Lots of LEDs in a ring to keep the shadows off of my work!

[@user-ik1vz1hf5v]

Вы супер-девушка! Я восторге от Ваших работ и изделий!!!

[@Cactusworkshopchannel]

This is probably the most ellegant soldering station! good job with the aluminum!

[@darbinorvar]

+Cactus! workshop Thanks!

[@ohmedarick1]

Hi lynn thanks for the ideas by using the aluminum tubes as a third hand

[@WobblycogsUk]

Nice project. I think you should break the edges more on the holes where the wire goes up the light arm otherwise the sharp edges may, over time, cut through the cable.

[@MultiCreasey]

Brilliant - brilliant project, brilliantly presented. Inspiring.

[@CatholicWoodworker]

Really stellar design all around. I can see something like this coming in handy for so many projects. Thanks for sharing!

[@darbinorvar]

+Conrad Designs Thanks for watching!

[@robertevans6481]

aluminum and walnut great combination....love those handles you made for the box going to have a watch the video again I will be taking this idea sorry but it's so cool

[@darbinorvar]

+Robert Evans Thanks for watching Robert!

[@vishwanpurandat8302]

This is fantastic!! I really need one on my desk. ....

[@davidclauson5256]

Cool build Linn, always learn a little something from you're videos. Yes the walnut and aluminum look great together. Thanks for sharing your videos!

[@darbinorvar]

+David Clauson Thanks for watching David!

[@cencalmatt]

Probably my favorite project of yours yet. Nice!

[@darbinorvar]

+cencalmatt Thanks for watching!

[@secondwind75]

What a great one-of-kind project. I like the mix of metal and wood. Very impressed with your design and skills. Very nice job, Lynn

[@darbinorvar]

+secondwind75 Thank you!

[@markevans3779]

Another really enjoyable video Lynn... Your projects are getting better and better.. looks like a really useful piece of kit to have, and the end product looks really professional. I thought the exposed wires and name engraving were both nice touches... really well done and thanks for sharing you ideas.

[@darbinorvar]

+Mark Evans Thanks for the nice comment Mark!

[@nilsolsson880]

Cool & nice! It looks so cool when the cnc is working.

[@BradKwfc]

That is so cool....Exactly what every electronics nerd needs!Good job!

[@springwoodcottage4248]

Elegant & useful: Hold & light, so essential for soldering tiny components & coordinates with your fume extractor

[@darbinorvar]

+Springwood Cottage Thanks! I was hoping they would match in style :)

[@scottharris6423]

Lynn, you are very clever and skillful. I was so impressed with your lighted extra hands I just had to Like and subscribed. Good job!!!

[@stevedoubleu99B]

Quality workpersonship, I'm sure it would still be nice quality even if you didn't have the nice machinery. Great presentation skills as well!!

[@nagato8152]

Just what i need in my wife should know how to use tools and independent love this type of woman 💙

[@JerryPaulTreeCreations]

That's cool Linn! That light looks incredibly bright. Perfect for intricate work. The only thing I'd have to say that I scratched my head over was how you screwed on the mesh on the bottom... I think screwing the corners down, instead of the sides, would prevent the corners from getting catches and bending out of shape as you move it. Other than that, I love it! Nice touch making it a "signature piece" too! Cheers!

[@darbinorvar]

+Jerry Paul Thanks Jerry!

[@PollyMotion]

Hi fellow Scandinavian :) Great project! You've inspired me to create a similar set of helping hands my self. Your project came out really nice! Keep up the good work!

[@lqv77]

Đúng là con gái! :) Lần đầu tiên xem CLIP DIY do con cái làm. Đồ nghề thì quá PRO.

[@hjil7139]

saludos desde Venezuela , te felicito por tu nivel de detalle es impresionante, excelente planificación , diseño y acabado gracias por tus aportes besos

[@DanGartman]

I love your videos and your work! You're my new favorite DIY channel!

[@PraveenkumarP09]

Awesome work. Nice idea. Am also planning to built one .. "a bigger one to hold larger pcb". Thanks for sharing this .... Great help :)

[@labomat]

Very nice build. I thought about using some tranparent plastic instead of the aluminium and lighting the parts from the bottom as well ...

[@carlrubino7234]

Awesome job, Linn! Your videos are inspiring to watch. So many great ideas!

[@darbinorvar]

+Carl Rubino Thanks Carl!

[@themushintrader2836]

The best design I have seen so far. Just sub.

[@emremutlu44]

Very pleasing and clean work. Thanks for sharing it. Just for a note who wants to do smt like this, be careful while applying pressure on phosphorous side of the LEDs because it may cause defects on LED cells, so you won't say bye for a couple cell lines as a surprise :)

[@darbinorvar]

+Emre MUTLU Thanks for watching!

[@gazutecnology]

Hello! with respect and admiration; receives a greeting from Medellin Colombia. Great job and a great person you are by sharing your wisdom.I am sending this message translated ... because they do not speak English !. "thank you very much and makes this project because I work in the computer systems and electronics and this ecxelente and beautiful." Always take care.

[@faridabdrahim6800]

bright idea.you are a professional electronics hobbyist with a workshop fully equipt. and you are attractive looking lady.

[@leandropdr00]

Excelente projeto, você se supera a cada vídeo!!!!!

[@20vK]

Awesome job - love that you made it from scratch!

[@darbinorvar]

+Richie Rich Thanks Richie!

[@rauzo25]

Gostei! Ótimo projeto! Parabéns!

[@PlatinandoNoPS5]

You an amazing woman! Thanks for sharing your knowledge!

[@depresskam]

Don't forget to limit the current, otherwise the LED won't live long! (many boosters have this feature). and I would add a magnifier too :) Looks awesome!

[@ahmedabdulAziem]

i already add this to my list until i build my CNC machine first its really looking awesome thank you

[@poorkidd]

Super cool!! Building one right now!!

[@arrowstheorem1881]

Amazing! Love it! Clear narrations too! What do you do with your lab other than for making these wonderful videos? Are you an inventor?

[@cade861]

That turned out awesome! may i suggest if you do another project with leds and you dont need such a high powered led look into 3W they wont get as hot and are 12V and for most applications plenty bright. but I do like the added look of the heatsinks on the light and the walnut is beautiful great project!

[@darbinorvar]

+cade861 Thanks for watching!

[@michaelnowak4078]

LINN. WHAT A GREAT IDEA AND GREAT JOB !!!!!!!!!!!!! THANK YOU...

[@darbinorvar]

+Michael Nowak Thanks Michael!

[@dunawam]

bravo! lovely, enchanting, beautiful! 🏄

[@darbinorvar]

+Marc Chilifritters Thank you!

[@michaelwilson2916]

I love these projects you come up with. super creative.

[@darbinorvar]

+michael wilson Thanks Michael!

[@tomsdreamshopworx]

Really cool! Very well thought out.

[@Terrazocultor]

Nice Lab, good job!

[@Slugsie1]

Very cool little bit of kit. However you can buy 12v 10W LEDs for about $1 from places like BangGood, which would save nearly $20 on the whole project as you won't need the voltage booster either.

[@dewardthornton7201]

Excellent project. Excellent video. Thank you.

[@GiacoWhatever]

This is your best video so far! I love the project!

[@darbinorvar]

+Giaco Whatever Thanks Giaco!

[@mehdimahdi1175]

so nice ... good job Lynn but i think you don't need an LED that big a smaller (5mm) one could do the job or a combination of 2 even smaller, less heat ... :) by the way i like that CNC is it a wood and meatl CNC ?

[@elkikinlopez53]

simplemente espectacular !!!!

[@69dragons]

Love the channel been subscribed for a few weeks now. This project is pretty awesome! However, I would make one minor change. I would ground it. That way you can work with static sensitive parts with impunity! And thanks for the hours of entertainment and education.

[@darbinorvar]

+Daniel Jones Thanks for watching, and that is a good idea :)

[@JimDockrellWatertone]

What an awesome idea. Brilliant, I would say...lol Love your designs and builds

[@darbinorvar]

+Jim Dockrell (Watertone) Thanks Jim!

[@dcox01]

I love it. Beautiful walnut.

[@darbinorvar]

+dcox01 Thank you!

[@tuncaycelik85]

Amazing, Very Useful Good Job Linn 👏👏

[@ScrapwoodCity]

Cool device, can be really helpful when doing electronics and soldering! Neat project!

[@darbinorvar]

+Scrap wood City Thanks!

[@aymanmaghraby8846]

i have seen couple of videos of yours , and you are such an amazing girl , i like the way you do stuff , keep it up an all the best .

[@MyGarageWoodshop]

Great project! I never would have thought to make something like this, what a great idea!

[@darbinorvar]

+My Garage Woodshop Thanks Rod!

[@TheMarcball]

very nice, Linn, you(ve really gotten your style and groove and I can't wait to watch your next projects, and show them to my wike and kids... Thanks for sharing, and keep on trucking !

[@darbinorvar]

+Celmar Thanks for watching!

[@paweldun]

my favorite part is when you wax the wood, it finish looks so nice and elegant

[@MZ72]

Nice Idea and great project! I'm thinking of adding a LED light to my helping hands...

[@darbinorvar]

+MZ72 Thanks!

[@spiritcore1]

Very nice project! I would add an option to change the LED brightness. it looks very bright or maybe it's only in the video...

[@simmsvzla]

Greeting from Venezuela Beautiful work I like one..

[@sancarcar1713]

it's really impress me this model i love it so much

[@mark879]

Cool project. I want it. I think I'll make one now.

[@HobbsBhipp]

This is a really great idea!!!

[@arvind50]

Good project and very well done - loved the machining and your skill. A better choice for LED would be the Cree XML @ 3V, 2.5A. Lot more lumens per watt, comes with custom optics (You could choose focus, spread, dispersed etc based on what you are working on) and also the electronics is lot simpler. You could derive power for this from a Li-Po pack or 18650 laptop batteries and a few components to drive it in CC mode with brightness control.

[@darbinorvar]

+Arvind S. Thanks for watching!

[@ybaggi]

This is a beautiful piece. I love the integration of the aluminum and wood. have you used it since? and how is it practically? I'm asking because it does look a bit crowded up there. do you ever need the 3 crocs? I've alwazs found the the 3rd hands end up tiping over when I press down with my sothering iron so having a platform like this would be awesome. If I can get my fat fingers in there. thnk you for your videos. cheers.

[@darbinorvar]

+Yves Baggi I just finished it very recently but I am using it a lot so far. It is quite heavy so it would not tip over very easily. Thanks for watching!

[@engieviral]

Nice project, looks very flash! Does that globe support dimming? I think it would be awesome to be able to set the brightness of the light something south of maximum sometimes. :)

[@rtoebak76]

Very nice build. I like it. Im going to make it a bit bigger to work on. Thanx

[@epiNoesis]

This is so awesome! So inspiring! So sweet! Thanks!

[@darbinorvar]

+epiNoesis Thanks!

[@rvc6506]

I'm 82 & am delighted to find a woman doing stuff that wouldn't've been "normal" when I was young.

[@arthurmead5341]

Are you still alive

[@Cradley684]

That is really cool I know you I used to do electronics you never got enough hands. Brian UK

[@AL6S00740]

how about conductivity from the alligator clips to each other ?... sometimes We need complete Isolation so was this feature provided ?

[@agustinpereyra2993]

Me encantan tus trabajos. Este es muy ingenioso.

[@darbinorvar]

+Agustin Pereyra Thank you!