Make a Tablesaw (3in1 ) Router table jigsaw table

[@LLPOF]

This is just incredible. Unreal. I've watched it 3 times already. I'm gonna use this as my base plan and spend about 24 more hours searching youtube for other neat ideas to incorporate them into the design. I can't say enough how fantastic this is.

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@agusedro8788]

Please stop by on this channel, it can be for reference in making shelves etc kzbin.info/www/bejne/aZDWfZ9tjpyig68

[@davidmuresan1735]

See my Parallel Guided Power Saw.

[@tinycuisine6544]

Other channels would have made this an 8 video series, and you gave so many good ideas in just 16 minutes. Thank you so much. That must be a joy to use.

[@leemaker6801]

Thank you for watching. Have a nice day

[@komyominn6721]

@@leemaker6801 ဲဲဲ

[@homerefresh6367]

kzbin.info/www/bejne/apTWaWV7l9CbpKM

[@Vladimir_Ryabov]

Посмотрел с великим удовольствием, наблюдая за твоей работой поражаюсь сколько любви к делу которым ты занимаешься стол просто песня!!!лучшее что я видел DIY I looked with great pleasure, watching your work, I am amazed at how much love for the work you are doing the table is just a song !!! the best that I have seen DIY

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@taegyuyim7997]

짧은 영상에 다양한 아이디어와 필요한 부분만 효과적으로 보여 주네요. 어렵지않게 구할 수 있는 재료들로 정밀도도 충분히 확보 가능할 것 같고, 특히 원형톱과 루터 리프팅 메카니즘은 정말 기발합니다. 원형톱의 각도 조절 메카니즘을 추가할 수 있다면 완벽할 것 같습니다. 공유해 주셔서 감사합니다.

[@mauriciobaya9030]

J 0:18

[@mauriciobaya9030]

😂😂

[@mauriciobaya9030]

😂😂

[@mauriciobaya9030]

Jwwe

[@aimeestephens7135]

This is the best setup I've seen so far! I love the lifts. That was my main problem with my router. It's not easy to adjust so the lift mechanism should help immensely. Thank you for sharing this with all of us.

[@davidmuresan1735]

See my Parallel Guided Power Saw.

[@kurt1853]

Just amazing, clean , no talk, no music...... The best work table and the best "how to make a 5 star professional work table " video I've come across. Super

[@jedirex5268]

Unbelievable....most jaw dropping video I have seen on KZbin..you are an artist!

[@leemaker6801]

Thank you for watching. Have a nice day

[@pvm1974]

One of the most complicated table saw i've seen so far in my lifetime...the use of tools and materials are of another level, japanese artisans really amazes me...their skills and knowledge are uncomparable. This is one example why japan technology is 10 years advance than any other nations in the world. Heck!.. even their futuristic toilet seat were unmatched to any other advance nations.

[@williamteixeira1731]

He is korean

[@a.m-k9953]

The best diy work bench i've ever saw. you're an artist my friend.

[@leemaker6801]

Thank you for watching. Have a nice day

[@stormi6863]

This has got to be THE most PRECISE workbench I've seen built. Incredible idea, design and execution. Thanks for sharing.

[@rodneydaniel-palmer9189]

Absolutely correct!! I love this too.

[@raduga8777]

Спасибо друг! Очень хорошая идея! Сделаю себе такой-же для своей мастерской...Очень люблю работать с древесиной....Стол очень практичный!! Спасибо!!!

[@agusedro8788]

Please stop by on this channel, it can be for reference in making shelves etc kzbin.info/www/bejne/aZDWfZ9tjpyig68

[@vladislavkorolev6489]

Я, в шоке! Он, меня, просто наебпл, за три секир, своим мастерством в создании шедевр а

[@Redo-Naglec]

Не подскажите как называется фиксатор с красной ручкой который он ставит для фиксации продольной опоры или как ее)?

[@raduga8777]

@@Redo-Naglec Это эксцентриковый зажим, самодельный или покупной не подскажу.

[@justjoshinson]

love this build, but I must have missed something --- how is the blade tilting at the end of the video? it looked like a fixed mount...

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@النجاراليبي]

Thank you. Is there a video for the 45-degree saw?

[@idreamnlee2574]

우와!!!! 이 분은 그냥 장인 이십니다!!!! 겉보기와는 달리 무쟈게 꼼꼼하신 분 이시네요^^ 엄청 납니다^^ He was not a Korean!? I am so sorry. Anyway, he is just amazing!!! Very very detailed man different from outlooking^^ Just awesome^^♥♥♥♥♥♥♥

[@lucifarian93]

Love the invention and the playing card shims!. Thank you, most inspiring and I use extra long bit holders too! You are obviously proud of your work and I am too.

[@leemaker6801]

Thank you for watching. Have a nice day

[@harvindersingharora3845]

Exactly, the use of play cards which is available in abundance is brilliant idea.

[@suniljadhav776]

Purchase masin priz bro India

[@agusedro8788]

Please stop by on this channel, it can be for reference in making shelves etc kzbin.info/www/bejne/aZDWfZ9tjpyig68

[@jcclassybro9426]

You are a Movie Star... you deserve an Academy Award....you create Art...God Bless my friend....

[@ericcumming8518]

You have made an amazing bench. I had in mind making a similar fence with all the same pieces, but wasn't sure how it would work. You proved it could be done :)

[@davidmuresan1735]

See my Parallel Guided Power Saw.

[@고금동사생활]

우와~~~ 완전 기술자. 이거 하나로 반해서 바로 구독 좋아요,알림까지~ 늘 시청하겠습니다

[@drrsc]

This is by far the best, most professional table saw or table saw/router table/jigsaw table build on youtube. Thumbs up and subscribed.

[@leemaker6801]

Thank you for watching. Have a nice day

[@benoitjouannel]

Bonjour, C'est la table la plus aboutie que j'ai vu sur KZbin. Super boulot !!! Bon WE.

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@BrassLock]

Well Mr. Lee, I've watched your 3-in-one project, and although I don't have room for such a big outcome, its certainly given me lots to think about, and so I've subscribed. Your remote adjustments for the circular saw and router are great solutions. I also love your visual teaching/presentation style. Thank You.

[@diyer9645]

Very impressive. What are those lifters called. Can you please provide links to those items in amazon

[@leemaker6801]

Thank you for watching. Have a nice day

[@drQ11235]

Truly wonderful. The fact that you use the workbench piece by piece to make itself, is just icing on the cake.

[@0ohm738]

Great work! I like it! I have a question/concern though: The saw is not really fixed in its height adjustment right? It is relying solely on gravity. If the blade gets stuck it might pull up the saw blade all the way. That would be dangerous. What do you think?

[@sampark1922]

Tons of work, but it looks like you did it one afternoon!! Great job!! Love the precision.

[@leemaker6801]

Thank you for watching. Have a nice day

[@jeffsbaner]

Only nearly 17 minutes

[@dale1956ties]

This is amazing. What a bit of genius this bench is! I wonder if you can use staked dado blades with it?

[@someguynj]

I'm continually amazed by how many awesome woodworking projects I've seen on KZbin from dudes in flip flops. Maybe I don't need those work boots every time I pick up a drill.

[@leemaker6801]

Thank you for watching. Have a nice day

[@dredbud9272]

Until you drop it on your foot😆

[@nickbrutanna9973]

Yeah. He can do what he wants, as can anyone. Decent foot coverings are a Good Shop Idea.

[@chucksmart]

This man is a wood working and all around genius /bowsdown Well done sir!

[@leemaker6801]

Thank you for watching. Have a nice day

[@jamessmith6055]

Your precision and dedication to perfection is amazing. Great job

[@homerefresh6367]

kzbin.info/www/bejne/apTWaWV7l9CbpKM

[@giemmi76]

Very very good! And when you bouncing saw at 45 degree? How it is possible

[@merlinlenchanteur9908]

Bravo!! Tu as des doigts en Or!!!! C'est un bonheur de te regarder assembler toutes ces pièces. Je trouve remarquable la précision de tes mesures et le soin que tu apportes à ton projet

[@mendoanz]

best multi function woodwork bench I've seen so far...thanks for share

[@leemaker6801]

Thank you for watching. Have a nice day

[@merci4856]

정말 잘만드시네요, 보쉬테이블쏘를 합체해서 3in1을 만들어보셔도 대박조회수 나올거 같습니다.

[@leemaker6801]

시청해주셔서 감사합니다. 즐거운 하루 되세요 ^^

[@lorenzoaqueveque2893]

12273372

[@nicoteen9407]

Formidable build! Thank you. Q: How did you set up the Circular saw for angled cuts like at 16:44 - did you make some kind of tilting mechanism with the saw locked to its frame, or were you able to organise it so the saw would tilt in its frame?

[@verygood_man]

장인의 솜씨를 보게되서 너무 좋았습니다. 취미를 넘어서 공부에 도전해 볼까하는 저에겐 DIY가 무엇인지 그리고 공부가 필요하다는 이유가 분명해지는 영상 이었습니다~ 영상 편집과 사운드 밸런스까지 좋아서 보는 내내 편안했습니다~ 좋은 영상 감사합니다~!

[@leemaker6801]

도움이 되셨다니 저도 보람이 있네요 ^^ 시청해주셔서 감사합니다. 즐거운 하루 되세요 ^^

[@youtukang]

Pliss english lanuage ☺

[@agusedro8788]

Please stop by on this channel, it can be for reference in making shelves etc kzbin.info/www/bejne/aZDWfZ9tjpyig68

[@나침반R]

정말 디테일 하네요. 활용도가 인터넷에서 판매하는 테이블쏘를 능가하는 작품이네요.

[@ΜΟΥΧΤΑΡΚΟΥΤΣ]

Всё как просто и гениально!!!!Респект мастеру! Хочу такой стол!. Только не увидел как поворачивается на 45 градусов!

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@tonyrose944]

That's for sharing, great video. Where did you get the track and rollers for the lift?

[@leemaker6801]

Thank you for watching. Have a nice day

[@alekpavel]

Ну и как мне дальше жить с этим ? Я ничего ,оказывается, не умею (((. Автору большое спасибо. Отличная работа.

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@jerrygiltner8031]

Do you have a step by step plan? A little hard to follow the fast-tracked illustration. Exceptional idea! Thank you.

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@mattreue1]

You are a genius! You must have made several of these as your workbench was set up perfectly for the table saw combination. Thank you so much. I want to build a similar table with homemade fence around an old but very solid Craftsman 12" saw and a router. This video supplied all the answers.

[@youthuber13]

Wow! So amazing! Smart ideas. God bless and keep safe always. Watching here from Canada. Full pack sir!

[@gcooperish]

Fantastic bench, the best I've seen and just inside my abilities (I hope!). I am putting a shopping cart at the moment and have most items ready to go, but there are a few things that are not in your parts list, and although may be obvious to others, aren't obvious to me. 1. For the fence, I don’t know the name of the wheels that run along at the far end, 2. The name of the rail and wheels to go under the Scissor Jack, 3. Does the router need to be a plunge router? Or can I use a Fixed or Laminate Trimmer at full extension (this is simply because I have a Laminate Trimmer spare). 4. Everyone’s question, how did you get that Saw on an angle? Manually or otherwise I’d like to see how you did it with this bench.

[@ericparachini3322]

Hello, Very nice job. Do you have the plans or made a video for the trolley that slides on the rails? Thank you for your help Eric

[@zhanybekseidullayev7975]

Вот что значит подойти с умом. Мужик ты гении. КрасавчеГ:)

[@marquardtbd]

That is the smoothest rip fence I have ever seen on a home build

[@СергейГольцман-у8ф]

Это лучший комбинированный стол, из тех что я видел в интернете!

[@leemaker6801]

Thank you for watching. Have a nice day

[@caseydonnell1350]

How are you securing the router underneath the table? It looks like it's just sitting on top of 4 little pieces of wood!

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@johnskunk609]

I'm a novice; but, absolutely fantastic!!! I love putting a well constructed informative video on a faster speed play and can get so much more from it. I look forward to watching more of your work.

[@leemaker6801]

Thank you for watching. Have a nice day

[@freddyboyer3876]

bravo mister LEE , i think you are familly with bruce ......you are the best

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@TV-fk8qn]

정말 대단 하세요^^ 존경스럽습니다

[@gertvangennip4330]

Fantastic and creative solution - where can I buy the wheels and rails for the Steel Scissor Jack Handle Crank Tool.

[@chamuel48]

you can find it all on Amazon.de for sure or maybe Bol.com

[@АлександрПетров-щ4л]

Ай молодец дядька подъемник для цыркулярки и фрезера придумал то что надо,а вот упор мне больше понравился в столе 2в1 там он проще в изготовлении,а так в целом супер,мастер одним словом

[@leemaker6801]

Thank you for watching. Have a nice day

[@youtukang]

😍😍

[@abuabdulmuhsin]

this is amazing, can you tell me the hollow galvanis size? seems very rigid and durable.

[@ГеннадийХодин]

На первой минуте ставлю лайка. и подписку и досматриваю с удовольствием. Тоже хочу сделать что то подобное. Особенно понравилось идея с лифтами для циркулярки и фрезера. Молодец.

[@leemaker6801]

Thank you for watching. Have a nice day

[@JoeAnshien]

Really quite fabulous. How long did it take you in REAL time to build? Thanks Joe

[@slawapup3209]

Чувак, ты крут!!!А за чертежи отдельный ЛАЙК,😄👍👍

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@shoaibafzal7573]

You deserve billion likes👌👌👍👍

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@paultakoy7091]

You sir are a true craftsman. Awesome job! I would love to make this. Do you happen to have any list or materials that you used for the fence or the metal square pipes? Thank you and looking forward to more of your videos! Thank you for sharing your skills!

[@박청하-l6u]

제가본 영상중에 최고입니다.

[@cvan5]

До это го я думал, что я сделал стол круче, но ты превзошёл всех ! Это гениально просто , продуманно , функционально и придраться не к чему .

[@manfredmuller8162]

Der beste Anschlag den ich je gesehen habe!👍

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@TDSOC]

Отличный стол, за размеры - отдельное спасибо! Вы молодец!

[@faizullakhan1556]

I love it. This is the level of skill I want. I can so many small projects coming from this. I am actually adding an extention table to my saw but its ony 20 inches which will increase the rip capcity to 36 inches. This is so good.

[@MichaelPragerspeaker]

I can't hope to do what you did - such an amazing collection of wood- and metal-working skills, plus all your know-how. Just a wonder to watch you!

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@hankrawlings6505]

Nice build. Do you state how many hours you actually took to complete this build?

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@sergiocortez7600]

Simply amazing. As an engineer myself all I can say is all is perfectly done, and a particularly neat work. I'd just love to know how you control/vary angle in the circular saw as it's one of the main reasons I haven't made a conversion to bench on my own. 😁 Thanks for your contribution! Regards from Ecuador! 🇪🇨

[@leemaker6801]

Thank you for watching. Have a nice day

[@lordrudolph1037]

Hmm, I didn't know having a great day would solve angle issues, but I guess it's all about perspective.

[@homerefresh6367]

kzbin.info/www/bejne/apTWaWV7l9CbpKM

[@davidmuresan1735]

See my Parallel Guided Power Saw.

[@troyglazer9647]

Nicely designed...I think I will have to copy your ideas when I get into my new workshop. Cheers.

[@FilipeMVicente]

This is the most brilliant and out of my league project I've ever seen on YT!

[@elmerarpon4966]

I

[@elmerarpon4966]

Zbigniew I

[@elmerarpon4966]

I bi h0 evh9 89ww4W5

[@8.hathanh211]

@@elmerarpon4966 ơi

[@Engdrake]

내가 본 최고의 자체 제작 작업대! 나도 만들고 싶다. . . 프로젝트를 가질 수 있습니까? 감사합니다!

[@leemaker6801]

시청해주셔서 감사합니다. 영상에 사이즈 나와있습니다. 즐거운 하루 되세요 ^^

[@ugomariaesposito8737]

thanks for this video. it is so inspiring to see you working with all your dedication, the cards and the flip flop tho added a hilarious touch to the video, really fun! this is the way I want to be committed to my work :) like from italy

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@swkarg]

do you offer the plans for this? Great Job

[@leemaker6801]

Thank you for watching. Have a nice day

[@namelesswarrior4760]

You're a very smart and practical man! I also had thought about using the 4" lab jack table but wasn't sure if it was strong enough. Thanks for answering that question.

[@leemaker6801]

Thank you for watching. Have a nice day

[@rustamgalaktion8338]

Жаль что лайк можно один раз поставить. Очень нравится такой стол. Да и многие другие изделия мастера превосходны для мастерской. Класс!!!! 👍👍👍

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@КонстантинБаграев]

Хорошо бы показать механизм изменения угла наклона пильного диска

[@jorgedr5835]

Was this your first try making one of those? pretty impressive tho! Also love the trouble solving parts. Most vids don't show this and it's very important

[@rsilvagrodolfo]

excelente, te felicito, muy buen trabajo, muy buen video, un proyecto bastante interesante y practico para los que nos iniciamos en la carpintería como un hobby. saludos desde Mexico

[@leemaker6801]

Thank you for watching. Have a nice day

[@homerefresh6367]

kzbin.info/www/bejne/apTWaWV7l9CbpKM

[@TheRossRants]

how did you attach the router to the lift? The video makes it look like it's just balanced on it.

[@panaye016]

Exelente trabajo. Mucha paciencia y muy profesional.me gustaría que me proporcionaras lista de materiales y medidas gracias y exito

[@leemaker6801]

Thank you for watching. Have a nice day

[@hectorsaucedo1963]

Exelente maestro todo lo hace a la perfección muy ingenioso gracias por compartir sus conocimientos me quedo impresionado de sus abilidades Dios le bendiga y siga compartiendo. Saludos desde escobedo nuevo leon Mexico 🇲🇽

[@tiraroy9574]

This is incredibly intelligent art of work. 👌 Good job Mr. Lee

[@leemaker6801]

Thank you for watching. Have a nice day

[@backpacker3421]

LOVE all your solutions in this. Fantastic! The only issue I see is that you have no depth control when cutting bevels with the table saw, which is a minor safety concern, but not huge if the user is experienced and being careful. Positively amazing what you did here.

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@rp4187]

Master at his work. Amazing! Thank you for sharing. Truly respect your work and thought process.

[@leemaker6801]

Thank you for watching and have a look other uploads. Lots of fun!

[@qldu13780]

Very very good table I will do the same for my workshop 👍👌👏👏👏👏👏

[@zTribalstylerz]

Incredible. You make me question all the things I have spent money on ;-) cheers Leemaker!

[@leemaker6801]

Thank you for watching. Have a nice day

[@theroboticscodedepot7736]

Brilliant! But what is the purpose of the sliding panels to each side of the router bit? Typically that's for dust collection but I didn't see any dust collection. Are you planning on dust collection through the square metal table saw guide?

[@mrchoi9784]

형님~~ 너무 멋지십니다. 저도 한 꼼꼼한줄 알았는데 ㅎㅎㅎ 저는 애기였네요^^ 잘보고 갑니다~

[@leemaker6801]

시청해주셔서 감사합니다. 즐거운 하루 되세요 ^^

[@SadicaOficial]

Amazing build. Where can i get the caster wheels you used? cheers from Peru!

[@dinonanale640]

amazing skills Mr. Lee. thanks for sharing😃🖒

[@leemaker6801]

Thank you for watching. Have a nice day

[@chuckw6099]

That was a very impressive, built table. It would take me forever to build something like this and I work with tools all the time. Just not wood working tools. I was even amazed that there were 3 of you. Lol.

[@manhae99]

진짜 대단하다는 말 밖에 안나옵니다. 다른 분껀 와.. 나도 해봐야지 하는데 이건 그냥.. 보기만 해야겠다는 생각이 절로 ㅋㅋ

[@leemaker6801]

시청해주셔서 감사합니다. 즐거운 하루 되세요 ^^

[@vicentemontesdeoca3029]

Hello Mr. Lee, This would be my next project! Where can I find the blueprints? I would like to have the exact measurements. Thank you!

[@pedanglaut2960]

진짜 너무 너무 좋아요,, 감사합니다 사장님🙏🙏🙏

[@Fernguy3.0]

Best Saw table build ever👍👍

[@leemaker6801]

Thank you for watching. Have a nice day

[@Uralski_massiv]

Отличное видео 👍👍👍 супер 👍👍👍. Желаю успехов 👍👍👍

[@mikeduffy56]

Great video best ever. Do you sell the plans for this project??

[@Eraseri]

Very nice and all! I'm jealous. Only thing that I'm little skeptical about is the fence. It's quite loose and there isn't much guarantee that it's in the same angle as the blade when you move it around. Although builder must have noticed this by now :)

[@saldogdave]

The fence is only loose when it isn't drawn against the metal rail. Once it is clamped, it is square with the rail and secure. This was checked in the video.

[@Oh6Torch]

Question: Which toggle clamp did you use? None of the available clamps match the one you’re using. The handle, base or tips are all different. Maybe it’s no longer available? Maybe how many lbs of force are required with your setup? Thank you for an outstanding video and brilliant bench!

[@marcelloo.anselmorodrigues2925]

Terrific!!!!! Thanks for sharing and God bless you for this!!!! - Formidável!!!!! Obrigado por compartilhar e Deus te abençoe por isso !!!!

[@homerefresh6367]

kzbin.info/www/bejne/apTWaWV7l9CbpKM

[@retreatc3244]

신의 손이네요 대단하십니다, 기술도 아이디어도 ,,,,존경합니다,