Make Amazing DIY Star Knobs / Free Pattern Template Available

[@anthonywalsh6605]

Good video! No irritating music and vocal rambling. Just right into the process.

[@henryworkswoodandmetal]

TY !

[@jaimenahman3889]

Love the clean, informative video without having to guess what the craftsman is measuring, etc. Thank you so much for this video

[@henryworkswoodandmetal]

Thanks for taking the time to leave your feedback, I really appreciate it!!!

[@edmc755]

VERY VERY NICE BUILD < THANK YOU 👍👍👍🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦

[@henryworkswoodandmetal]

Thanks for watching! 👍

[@henryskinner1092]

Your videos rock. You are now my new mentor. Thank you Sir.

[@henryworkswoodandmetal]

I appreciate you!

[@Katifda]

Thanks for the excellent tutorial, I have many scraps of exotic hard woods and all of the tools necessary that will make very good knobs, without any out of pocket money!

[@richhalstedt7869]

Nice idea Henry. Putting that cap on it makes it look more finished. And the spacer absolutely makes sense.

[@henryworkswoodandmetal]

Yes, thank you, I really like how they look too….

[@Billlupton]

what makes this vid so interesting, is no musak, no rampling voice just direct visual teaching information well made

[@henryworkswoodandmetal]

Thank you the your great feedback, I really appreciate it!!!

[@IanKWatts]

Great work. I look forward to making these many side knobs

[@timjones-eliteautoservicer1569]

Well done. Looking forward to making these knobs.

[@MrKlarans]

Of all the knob making videos I have seen this is the easiest, simplest & best!! Thanks.

[@henryworkswoodandmetal]

That's great to hear, thank you and thanks for watching!!!!

[@markw3598]

I had some white 'cutting boards' that I used to make jig track guides for my table saw, and made some of these! they turned out really good, I used epoxy instead of construction adhesive. Thanks for a great video, I LOVE SILENT MOVIES!!!

[@henryworkswoodandmetal]

That's great, thanks!!!

[@noodlesiis]

Beautiful video and Beautiful end product too..

[@henryworkswoodandmetal]

Thanks so much!!!

[@sta39cee]

I love these. Need to make some for myself.

[@henryworkswoodandmetal]

Excellent! Thanks for watching…..

[@morrisonsusan]

Love the 5 star knobs

[@henryworkswoodandmetal]

Thanks!

[@jaimenahman3889]

Great video with clear steps. Even so, I would love a pdf for my future projects. Thanks for the great detail.

[@henryworkswoodandmetal]

Thank you! I will need an email address in order for me to get it to you!

[@JuanPerez-dn9ci]

Hola, me encanto la forma de fabricar las perillas, se ven muy faciles de hacer. Muchas gracias

[@henryworkswoodandmetal]

Hola, muchas gracias

[@jadae001]

Congratulations, you have found a very good way of doing these pieces.

[@paul-ld9vh]

Well planned. This video shows the complexity of building something that appears simple, although has many steps toward completion.

[@henryworkswoodandmetal]

Thank you for your positive comment!!!

[@markyoung7230]

Great idea simple. Looking to make my own knobs.

[@henryworkswoodandmetal]

Excellent, I hope they turn out great!

[@frankiemcmahon991]

Simple straightforward really good

[@henryworkswoodandmetal]

Thank, I’m happy that you liked it!!!!

[@leighhardy9926]

I normally make the knobs for my projects. I like your style better than what I am using.... Thanks

[@henryworkswoodandmetal]

Thanks, these are nice because they can be made any size and the don't have the bolt coming through....

[@davesmith4957]

Really helpful to see you write out each step on the stock as you progress through the process! Very well done. I have the luxury of having AutoCAD on my laptop, so I paused the video and drew a template as the video progressed. If there is any interest I'd be happy to share a PDF of the finished template. But your instructions make it so easy to lay out without a template! Thanks for sharing.

[@henryworkswoodandmetal]

Thank you for your great feedback, yes I would welcome any help with a drawing. It would be nice to offer to other viewers...my email address is listed on my about tab, please feel free to contact me, I see would really like to see what you've drew up!

[@jaimenahman3889]

Hi Dave, I would love a copy of the pdf. Thanks in advance.

[@laylandd9012]

Great video. It gave me the impetus to make my own knobs for my jigs.

[@stanleymurray9066]

I like the step by step layout

[@henryworkswoodandmetal]

I tried to make as easy to follow as possible, thanks!

[@artvarga7042]

Love the video. Nice and detailed.

[@htdj1951]

Great design. Torben Duelund

[@rclodfelter]

Been wanting to do this for a while. Thanks!

[@henryworkswoodandmetal]

Thank you, the pdf is on its way…….

[@Johnjohnb-xb3gk]

Awsome I cain't to make the knobs that I need.

[@bernarddouthit4647]

This is great! I am looking to build a wooden clamp or clamps to hold a door rail in place - long story, but I want to make the door removable and building a few clamps with your awesome knobs may just be what I need.

[@henryworkswoodandmetal]

I hope your project turns out well…….

[@tomarnold3948]

Great video. I appreciate the planning and the plans will be great to have.

[@henryworkswoodandmetal]

Send me your email and I will send it to you!

[@josevazquez5243]

very nice and straight forward

[@henryworkswoodandmetal]

TY!

[@DadzorRules]

Excellent! Gonna make a few tomorrow. The instructions on the plywood were inspired! Thanks for sharing.

[@henryworkswoodandmetal]

Thank you!!!

[@scorpio3x3]

Nice and easy! No one commented on the bag o' knobs in the lower left of the screen. I like the DIY knobs better.

[@henryworkswoodandmetal]

Yes, I much prefer to use tools and accessories I've made.......thanks!

[@danaschneider3124]

Great way to make knobs

[@henryworkswoodandmetal]

Thank you 👍

[@MegaDemon76]

Thanks for the video very easy to follow would like to try making some myself

[@henryworkswoodandmetal]

Thanks, good luck with your project, hope they turn out well!

[@MegaDemon76]

@@henryworkswoodandmetal Could you send me the template tried to make one but can't seem to get right thank you

[@henryworkswoodandmetal]

@@MegaDemon76 yes, but you need to send your email address, mine is located in the “about” tab in top right side of my main channel page

[@daniell.5654]

Great video. Can’t wait to make these!!!!!

[@henryworkswoodandmetal]

That’s great, good luck with your project!

[@georginachavez2138]

those are some great looking star knobs...….great job

[@henryworkswoodandmetal]

TY!

[@skiro75]

Thanks for your help I really like your style and help me a lot !!

[@skiro75]

how can i get templates of both knobs thnks

[@henryworkswoodandmetal]

You will need to send me an email with your address, mine can be found in the about tab at the top of my main channel page...

[@barryparsons4044]

Great Job !!!

[@jmallendds]

Terrific idea. I like the consistency of each pattern

[@henryworkswoodandmetal]

Yes, you need to send me an email to receive the template, mine is located on the about tab on my main channel page

[@henryworkswoodandmetal]

Yes, thank you, these knobs have working out great 👍

[@rjcote45]

Damn boy! That was excellent! Thanks for making me feel so stupid! Just kidding! VERY WELL DONE, SIR!!! Elegant, sophisticated result with simple techniques, due to your smart engineering!

[@henryworkswoodandmetal]

I’m glad you like them, thanks for the kind words!

[@AmplifyDIY]

These knobs are great! I love how you added the extra top piece to cover the head of the bolt. Brilliant!

[@henryworkswoodandmetal]

Thanks, I think by covering the top it gives them a much cleaner look....

[@AmplifyDIY]

Agreed. I've also never seen your approach of cutting out the holes in a star pattern first, then hogging out the middle to form the knob. That's a LOT easier than the other techniques I've seen, and does not require a jig, etc. Nice work!

[@henryworkswoodandmetal]

Thanks!!!

[@henryworkswoodandmetal]

Yes, I received your request and responded each and every time along with the PDF attachment, please check your spam or junk mail folder........

[@henryworkswoodandmetal]

I've sent it once again, please check your email, you will have to open the pdf attachment to view the template

[@specyfinder]

Great, great, great idea! I like it!👍

[@henryworkswoodandmetal]

I do appreciate that!!!

[@rhihodag9873]

I was just in the process of making some 5-finger knobs.... This was a gem of a video which I will use to make my knobs. I very much prefer 5-finger knobs just for the ergonomics/feel. My challenge was drawing the 72 degree angles but your use of a pentagon gives me a better tool for the layout. Thanks for your video!

[@henryworkswoodandmetal]

Yes, thank you, I prefer this larger style too, good luck with your project!

[@grahamhewitt5812]

Great design for DIY knobs. I've enjoyed your woodworking videos a great deal and learning a lot from them. Thanks!

[@henryworkswoodandmetal]

That’s great, I really appreciate you and your support, thanks 👍✌️

[@mahmoodmohammad7241]

Good job, Keep up Good work

[@henryworkswoodandmetal]

I will, thank you 🙏

[@jeanloreaud9282]

Jolie technique,à retenir !!bravo salut Jeannot 🛠

[@henryworkswoodandmetal]

Thank you!!!

[@ginaysumandil6659]

What a nice job!! Henry I cant believe how nice those knobs turned out!! Love you Henry, you are the best!!

[@henryworkswoodandmetal]

Love you more!!!!

[@frankiemcmahon991]

@@henryworkswoodandmetal please forward the pdf template if it is still available Many thanks in anticipation

[@henryworkswoodandmetal]

I will need an email address in order for me to send it to you

[@LittleKingEd]

Wow what a great video, i`ve been trying to make my own clamps, have the clamps made but i just can`t get the knobs made, i`ve tried a few different methods but they have all failed. Thank you.

[@henryworkswoodandmetal]

I hope these work out for you, good luck and thanks for watching!👍

[@JERRYWATERSON]

I HAVE TRIED TO GET A TEMPLET TO MAKE KNOBS THANK YOU SIR

[@henryworkswoodandmetal]

I will need your email address, thanks!

[@fridaschlegel1197]

So pretty and the best diy

[@henryworkswoodandmetal]

Thanks so much!

[@CFC007]

Love the knobs

[@henryworkswoodandmetal]

Thanks!!!

[@marilynmoore6752]

I use tee nuts and countersink the wood and cover it with either a thin piece of wood or use a 1 inch toy wheel over the head of the tee nut

[@henryworkswoodandmetal]

Excellent!👍

[@terrain-hardy]

really nice work many thanks for showing and please keep the good work

[@henryworkswoodandmetal]

Thank you.........

[@LeosTueftelei]

Good idea and nice work ! 👍 👍

[@henryworkswoodandmetal]

thanks, they are working great on my new drill press fence......

[@billirey9459]

Great video Henry. Just the information I need. I’m going to make eight of these right away. Thanks for sharing. I would also like a copy of the template. Thank you.

[@henryworkswoodandmetal]

Thank you, you need to send an email to me, mine can be found in the “about”tab on my main KZbin channel page!

[@barbersalmarvlyn4018]

Great idea

[@henryworkswoodandmetal]

👍

[@pauldstewart5501]

Excellent detailed instructions. I'm looking forward to making 3-4 knobs for a table saw sled . Can you please send me pdf? I'm struggling with duplicating pentagon template inside 2 1/2 circle. Also curious about how long the carriage bolts you used?

[@henryworkswoodandmetal]

The bolts are 1/4”’ x 3 1/2” long, most of the build details you will find in the video description, I would need your email address in order to get the template to you, mine is located in the “about” tab on the top of my main channel page ....

[@donsmith7719]

Great job! Could I get a copy of the template. thanks

[@henryworkswoodandmetal]

Yes, but I will need your email address, mine can be found on the about tab

[@erikdalgaard4312]

Yes to Star Knobs

[@henryworkswoodandmetal]

YES!!!

[@TheClaudecloud]

good work!

[@henryworkswoodandmetal]

TY!✌️

[@mariojhorge23]

Great job.

[@henryworkswoodandmetal]

Thank you for the comment!👍

[@Belg1970]

I liked that you had a bag of store bought ones laying in the background under the drill press. We all need our inspiration. Nice video tutorial. aren't you worried about the locknut and nut coming loose inside the cap?

[@henryworkswoodandmetal]

I was going to use one that had the nylon insert but I didn't have any on hand when I made the video, so far it been holding up...... thanks for the feedback!

[@rogerphillips2228]

This is just what I want very good video, I would like to get a template, but I cant find the about Tab...Help

[@henryworkswoodandmetal]

It’s on its way, thanks so much!!!

[@davidstarnes678]

I would like the template also. Great video.

[@stevesiefken6432]

Great video! How do I go about getting plans?

[@henryworkswoodandmetal]

Thanks, I will need your email address….

[@stevenpayne6669]

I agree with the others thee are awesome.. could you send me the pdf as well.. thanks

[@henryworkswoodandmetal]

Yes, but I will need your email address, mine can be found on my about tab on the channel, thanks!

[@1626littleman]

Great video! I just finished building a Moxon vise and made some star knobs and they look nothing like yours. Is their a chance of getting a set of plans from you? Thanks.

[@henryworkswoodandmetal]

Yes, please send me an email to [e-mail] and I will get it to you ......

[@joelesko3267]

Hey Henry! Love the video! This is exactly what I’m trying to accomplish! Just sent over an email! Hope to get a response! Keep up the great work! Sorry it took me 4 years to find your channel!

[@henryworkswoodandmetal]

Thanks…. It’s on its way!

[@jeffoldham3466]

that was really great,,,i would love to have the template but i dont see the about tab,,

[@henryworkswoodandmetal]

Thanks, you can find it on my main KZbin page on top to far right...,

[@MarquedeVilliers]

Great video. May you please send me the pdf.

[@henryworkswoodandmetal]

@@MarquedeVilliers yes, but I need an email address…….

[@tomstewart5712]

Wow! Well done! During assembly, you used two types of "glue" to cement components together. When you embedded and set the top of the carriage bolt in the body of the 5-star knob component, you used "something" that flowed out of a white tube. What was that "something"? Thanks for sharing the process!

[@henryworkswoodandmetal]

The other glue was construction adhesive, thanks!!!

[@paulbaker7397]

Did you put epoxy on the bolt head? ) I couldn't see what was in the squeeze tube).

[@henryworkswoodandmetal]

I used construction glue like liquid nails…

[@katrinamariecasper3517]

very nice

[@henryworkswoodandmetal]

Thanks, I appreciate it!!!

[@yonachali3845]

I gave these a try and even though it looks the same, I''m having some issues with the bolt. I applied the construction adhesive and let it cure for longer than needed. Now that I started using my knobs are not rotating the screw anymore (knob is gliding and screw remains fixed). This has been happening to more knobs the more I use them. So far 3/12. Any chance you faced his? And any suggestions on how to fix it? I'm planning on removing the "lid" so I can at least remove it from the thread it's stuck on, but don't know how to make it work.

[@henryworkswoodandmetal]

The knobs have been holding up and are working pretty well so far, the only suggestion I can make is that when your assembling the knobs is to make sure you tighten the nut as tight as you can possibly get it and the other thing that will help is to use nuts with a nylon insert, hope this helps!

[@yonachali3845]

@@henryworkswoodandmetal Thank you for the response. I have already tightened the existing plain nuts as much as I could. I'll get some nylon insert ones and report back.

[@richswirsding1349]

I like the knobs, please send template, many thanks. - rich -

[@henryworkswoodandmetal]

I will need an email address….

[@richswirsding1349]

@@henryworkswoodandmetal [e-mail] Thanks again!

[@henryworkswoodandmetal]

@@richswirsding1349 it’s on its way!

[@jgar8563]

What was the white paste/tube used before the glue up? @ 5:04 mark

[@henryworkswoodandmetal]

I was using construction adhesive……

[@WoodworkingEngineering]

Very very nice. What if the internal nut loosens? Have you ever experienced it?

[@henryworkswoodandmetal]

Thanks, I will use them and see if they hold, if they dont I have a few of these unassembled and I will use nuts with the nylon inserts instead.

[@WoodworkingEngineering]

HENRY ! Sounds smart 😊 Thanks

[@coyautarabiscoteboiseux4064]

travail excellent, félicitations pouvez vous me faire parvenir le PDF s'il vous plaît amicalement Alain

[@henryworkswoodandmetal]

If you would like to receive a copy of the template please send me your email address to [e-mail]

[@AngieWilliamsDesigns]

Great idea.

[@henryworkswoodandmetal]

Thanks, they have been working great so far.......

[@LittleKingEd]

Hi Henry, any chance i could get a set of plans for the knobs.

[@henryworkswoodandmetal]

Yes, they are on there way!

[@Johnjohnb-xb3gk]

On my utube I can not find the ABOVE tabe to request a copy of the free templete,

[@henryworkswoodandmetal]

It’s [e-mail]

[@terenceduggan6494]

Thanks Henry

[@henryworkswoodandmetal]

👍

[@joseedinaldo3672]

Excelente vídeo, gostei muito!!! Você teria o pdf com essas medidas? Desde já, grato pela atenção.

[@henryworkswoodandmetal]

Gracias, envíeme su dirección de correo electrónico y le enviaré el pdf, mi correo electrónico se encuentra en mi pestaña acerca de mi canal.

[@joseedinaldo3672]

@@henryworkswoodandmetal My pleasure. Thank you very much. Good luck with the other videos.

[@timlist4173]

Very nice. Can i get the template?

[@henryworkswoodandmetal]

@@timlist4173 yes, I will need an email address to send it to….

[@jkbarberjr]

I love the how easy

[@henryworkswoodandmetal]

TY!

[@mariojhorge23]

Great, great, great

[@henryworkswoodandmetal]

Thank you!!!

[@davidlayland2189]

Do you still have the PDF file available? if so, may I have a copy of it? Thanks.

[@henryworkswoodandmetal]

Yes it is, but I will need an email address

[@jmallendds]

If still available, i would like a copy of the template

[@henryworkswoodandmetal]

Yes, send an email to me, my address is located in the about tab on my main channel page

[@kenemt3949]

Hi Henry, May I also have a copy of this template?

[@henryworkswoodandmetal]

You will need to send me your email address

[@kenemt3949]

@@henryworkswoodandmetal and also, thank you sir.

[@adirsantos8717]

Muito bom excelente.

[@henryworkswoodandmetal]

Thank you 👍✌️

[@johnhassan2074]

Is the template still available? Thanks John

[@henryworkswoodandmetal]

Yes, I will need your email address

[@TheCypressmen]

Hi, Henry. Can you please send me a Free Pattern Template for the DIY Star Knobs along with the measurements? Thank you!!

[@henryworkswoodandmetal]

I will an email address to send it to?!

[@mrdenisprice7582]

I would like a temp plate please

[@henryworkswoodandmetal]

Please send me your email address, mine is located in the about tab on my main KZbin channel page…..

[@papajm1]

Free pattern template for star knobs

[@henryworkswoodandmetal]

You need to send your email to me….

[@curtischan6031]

@@henryworkswoodandmetalhello would like your pattern for star knob

[@henryworkswoodandmetal]

@@curtischan6031 hello, please provide me with your email address, thanks

[@henryworkswoodandmetal]

@@curtischan6031 it’s on its way

[@E3systems1]

Easy peasy

[@banditva8040]

Could i get your knob pattern. Thanks

[@henryworkswoodandmetal]

Yes, I will need your email address…….

[@MrKsmedberg]

Can I get a template? Please.

[@henryworkswoodandmetal]

Yes, but I will need an email address to send it to……

[@stevevorpe5735]

Traduire en Francais.Mercie

[@henryworkswoodandmetal]

🙏

[@davidmcgrath6507]

PDF please!

[@henryworkswoodandmetal]

Hello, I will need an email address in order for me to send it to you….

[@jbarryohagan3659]

please forward a template pattern asap,thank you.

[@henryworkswoodandmetal]

I will need an email address….