⚡Making Wooden Knobs: Mastering the Technique of Easy Shape and Size Adjustment with New Jigs / DIY

[@marvinrobinson8519]

This is the most AMAZING and CLEVER knob fisture I have ever seen!!

[@sitgesvillaapartmentneilsc7924]

Brilliant, superb video ,what an excellent set up to making traditional wooden knobs for hold downs etc, attention to detail is first class . Thank you.

[@steveferguson1232]

This has to be the best jig I’ve seen for knobs. The versatility of this is great

[@davidpickering5513]

I've made knobs without a jig and looked at many jigs online. This is the best. Very versatile and easy to make. I built it and have made knobs with 3, 4, 5, and 5 ridges. I love that I can easily make any Sze and configuration with it. Thank you for sharing

[@barry.w.christie]

What a brilliant jig, I especially like the ability to vary the depth of the cut out ... very versatile ... superb 👍

[@mikewelch3903]

Without a doubt, this is the fastest and best knob making jig that I have seen. ❤

[@jbylin]

Beautiful. I need to up my game like this to make anything for my dad.

[@ladykenja2700]

- VERY clever, unique, practical & useful. Thanx 4 sharing..

[@Brabbo-55]

Agree with Steve below..Seen a lot of them. This is the Best

[@sandorsuto7673]

Nagyon jó,szép munka.ügyes

[@claudej55]

Comme toujours, aucune place a l'improvisation.Excellent.

[@Sarcasmarkus]

Nice! I'm definitely going to make one of these jigs! 👍

[@wood4me]

My impression of the Knobs? So Simple yet Such Genius.. Beatifull things as is the jigs to cut different numbers of knobs.

[@kenord3437]

Thank you for the tips provided by your video.

[@theExcalibur2]

Thank you so much for sharing your idea. This jig is brilliant! I just made my one version based on your desing.

[@ponsaravanan]

Very good technique. Well thought.

[@bradleytuckwell4881]

Great jig and awesome woodworking skills

[@laszlomandula3200]

Day by day I see your perfection!

[@Wallisersonne]

Very nice idea. This jigs I like best from all I have seen. I will try to make then❤

[@steffen_kuellmer]

Looks so great! Genius!

[@MarkThomas123]

Nice Job.. Very flexible design that allows you to use the same base to make different diameter knobs and adjust each of the depth of cut to vary the knobs to the grip you enjoy most by sliding the jig in the T-Track.. Excellent design Sir! Really Excellent!

[@martingagne3136]

your jig is perfect i making one tonight ;) thanks

[@ferdinandbasques7715]

ENCORE UNE FOIS FELICITATIONS.. TRES BEAU TRAVAIL... BELLES REALISATIONS ...PRISES DE VUES TRES NETTES 👍👍👍👏👏👏 UN BRICOLEUR MARSEILLAIS

[@angelgf2361]

Hello, I really liked the aspiration system of the table saw. Do you have a video explaining the assembly. very good work. greetings

[@carpentak]

I don't know what video you are looking for, but there is a playlist related to table saws on my channel. Please find it on my channel. youtube.com/@carpentak?si=EBu7dvBxVzke6UPU

[@JoniPonsen13]

beautiful work . .

[@Fab045jb]

excelente, suscrito mil gracias!!!!

[@NebulaM57]

This was cool! Thanks for sharing!

[@StuartSanborn]

i had no idea of where you were going with angles you laid out. That is so cool!

[@argentinocqc]

wow excelente colega muchas gracias por compartirlo con tanto detalle, ahora a ponerlo en practica por este lado del mundo! Saludos desde Argentina! 👍

[@chrisdaniel1339]

Very ingenious design

[@TCGE08]

Feels so nice in the hand

[@DavidLavrack]

Keep up the good work

[@АндрейПоступкин]

Владимир ,здравствуйте.Это, безусловно, правильная подготовка к покраске. Будет интересна и сама покраска, с подробностями, с объяснениями. Спасибо. С уважением Андрей.

[@johntovarbricomaniaco9359]

Extraordinario gracias.

[@brigitteprovost4306]

Super ces gabarits de boutons, merci pour ce tuto! 👍👍

[@michaell.maloney4026]

VERY NICE!

[@ricardoromeromercado7747]

Excelente 👌👌👌.. felicitaciones por tan útil e ingenioso trabajo.

[@pplatto]

I really like this design - simple and elegant. I'd like to make a recommendation to simplify the building of the base of the jig. Just cut a strip of wood to fit into the t-track, and then glue and pin brad to a single piece of plywood. It will hold fine and will allow you to skip the steps where you have to make the base in two pieces, and later dowel them together. I finished the entire base in less than 30 minutes.

[@carpentak]

The way I made the base is to keep the runner and base exactly parallel. It also solves the problem caused by the lack of runners. It takes a little more time, but it has its advantages. I always prefer to make it well rather than make it fast. thank you

[@scottrelstyle3647]

Verry nice, bringing everything in shop up a level with the own made knobs like that.. :)

[@freon500]

Bellisomo, ... very nice.

[@chris7662]

You're like a micro-surgeon!

[@nickbrutanna9973]

Nicely done!

[@bguy3770]

This is such a fantastic and well thought out jig that I was a bit disappointed when you used T nuts instead of threaded inserts to finish off such great work. Easily solvable, I admit

[@jeanloreaud9282]

Du très joli travail,bien pensé, bravo, à bientôt salut Jeannot ⚒😉

[@dannywilsher4165]

Nice jigs!!! I've never used them nut inserts. I always thread the wood and have never had an issue.

[@neliorodrigues2249]

Muito bacana ficou excelente seu projeto GABARITOS para fazer MANIPOS foi uma ótima apresentação e muito boa à demonstração valeu obrigadao 🎉🎉🎉🎉😂😂😂

[@gedreillyhomestead6926]

Lovely jig, but I think that the knobs with T nuts you are using the wrong way round. The Wide part of the nut should be on top so as you tighten the knob the T nut is being drawn in towards the knob, the other way round, you could twist the knob right off the T nut. 👍

[@Choedron]

You could make a cutout, which had the diameter and thickness of the thread insert top. That way they would not stick out when inserted into the knob.

[@daywalker5532]

This is the Way to get gread Wooden knobs 👍 5 from 5 ⭐⭐⭐⭐⭐

[@onehandedmaker]

Just love it when you go to the effort to make your own gear. Have subscribed and will be watching a lot more of your videos. Regards One Handed Maker

[@gtmaybe]

Brilliant!!!

[@carpentak]

Oh my channel member! Thank you very much for your support.

[@glueupsscrewups]

Excellent jig!

[@chadwix]

Brilliant!

[@RegiPavan]

Loved it!

[@อนุชาเนียมงาม-ฎ3ผ]

good detail

[@adairruthes8752]

Fantástico, genial!!!

[@darren7650]

Very nice setup, but way more complicated than other's I've seen.

[@ej558]

Was just looking for something like this

[@jairsouza7108]

Excelente, parabéns ! 🇧🇷

[@antoniovazquez8934]

Excelente jig

[@Tukangkayu_ae]

Pengerjaan yang bagus pak

[@benbierly]

I would love a set of plans for this. Please consider creating a website for that purpose. If you already have one, please share the link. Thank you.

[@carpentak]

hello. I can't make a plan. So there is no website.

[@shanestevens622]

I prefer a basic round shape with splines for grip..more ergonomic

[@J-Chong]

Buen trabajo...👍 🇵🇪

[@jairoantonio-jades]

excelente

[@vs1-m1f]

멋❤있어요

[@giuliburt4369]

Professionale al massimo

[@stormman8393]

CarpenSENSATIONAL

[@ВедомыйИнженер]

Пользоваться ручками удобнее, если количество выступов (углублений) четное.

[@МихаилДмитриев-ъ2з]

прикольная идея!

[@Naddan49]

Oh my gosh, what is that beautiful tool called and where can I get one? 0:08

[@carpentak]

It is a Matsui scribing gauge made in Japan.

[@woodworkingspace7342]

Could you please tell me if the size of the circle for the templates can be chosen or has a specific size, does this size influence the size of the knob to be built? A suggestion to make your video brighter than it already is and help other people make a similar one would be to provide at least some important measures... Thank you!!! Good jobs

[@carpentak]

The size of the circle doesn't matter. It can be 5 inches or larger or smaller. The important thing here is to draw and set the angle correctly. Draw a smaller circle starting from the center of the 3-, 4-, and 5-angle circles and put a point exactly on the circle. That's the key.

[@woodworkingspace7342]

@@carpentak Ok my friend, thank you very much

[@anatolybulatov4931]

Огонь 👍👍👍

[@cackleberryfarm4598]

VERY COOL!!!!

[@Shawn-lk2ze]

Can you explain why at 5:33 you offset the lines? Is it only becuase of the angle of the clamp?

[@carpentak]

The line in the center of the base is the reference point for everything. Create a center point on it and that will be the axis of the circular templates. It draws other lines based on the first line.

[@Shawn-lk2ze]

@@carpentak Thank you!

[@julie7554]

잘생긴분이 손재주도좋네요❤

[@Inventions_Trick]

Great

[@BetterByThePound1]

Very nice, thank you. When drilling out the shaped knobs, could you not remove the 1/4" pilot bit from your hole saws? That way it wouldn't impact and mar your nice jig templates.

[@carpentak]

You are right, but it is inconvenient for me to remove those bits one by one when I use them. And since there are bits, stability is increased. I don't care about damage to the jig. thank you

[@davesalois871]

How about adding dimensions?? It would be very helpful!

[@herondinaantchita3091]

Muito bom seu projeto para adicionar numa serra de bancada... Tem vídeo com mais detalhes?

[@carpentak]

If you visit my channel, there are videos.

[@bitsurfer0101]

How did you calculated the size of hole saw needed for each type of knob?

[@carpentak]

I didn't calculate it. I just made it by combining the hole saws I had.

[@npnl973]

丸のこのブレード安全カバーは自作ですか？　また、その動画はありますか？　ぜひ自分も欲しいです。

[@carpentak]

나의 채널에 영상이 있습니다. 감사합니다.

[@npnl973]

@@carpentak ok I saw it. Thank you !!

[@theprince7946]

Hi it’s a great video from a great man can you let me know where can I get the Avro solid hard oil from please thanks

[@carpentak]

I bought that oil here in Korea. So, no useful information for you. thank you

[@theprince7946]

Ok but this oil better than Tung oil what the special about it thanks

[@carpentak]

Tung oil is also good. However, it dries much faster than tung oil. That's why I often use Auro Oil.

[@carterscustomrods]

@0:08 what type of ruler/scribe is that?

[@carpentak]

This is a Matsui scriber from Japan.

[@timgeist266]

I like your idea is there any to get dimensions on building it?

[@carpentak]

There is no plan. I can't make it.

[@fitzwilly7132]

What an exciting life you lead!!! Making wooden knobs!!! YAAAAWWWWNNNN!!!

[@Shanshucncrouter_from_China]

Extreme comfort

[@rootsss1]

exelente¡¡¡

[@GigiiSLO]

do you by any chance have plans for this jig?

[@carpentak]

I can't make plans.

[@dennismacwilliams196]

Could you come out with a set of planes ?

[@carpentak]

I have Stanley Sweethearts #4 and #5, and a block plane from Veritas. In addition, there are several Japanese planes.

[@davidpass4281]

@@carpentak I think Dennis was asking if you have plans available for the knob jig, not your hand planes.

[@stefrêvedelibertée369]

👍🏻👍🏻

[@daizamaker-jerrybraswell1997]

What is that caliper/ruler tool you are using at 8 seconds into your video?

[@carpentak]

It is a scribing gauge from MATSUI in Japan.

[@woodworkingspace7342]

@@carpentak Isn't this tool Veiko? Available on Alliexpress and Banggood? I have a Ruler T from this brand and it's great

[@carpentak]

That's right, I have that too. That's good too.

[@bitsurfer0101]

Do you sell plans for this jig?

[@carpentak]

There is no plan. Sorry

[@barthoswerkstatt]

👍😀👏👏

[@scott98390]

Where did you get that marking tool shown @ 0:08?

[@carpentak]

It is matsui's scribing gauge. Search and you will find it. I bought a used one.

[@ДартВейдер-з4э]

💥💥💥😎

[@markusdoering930]

Hallo Gibt es irgendwo Maße um das Teil schön nachzubauen? Danke für Ihre Rückmeldung. Gruß

[@carpentak]

Es gibt keine Zeichnungen. Das ist alles, was ich euch im Video zeigen kann.

Great Jig, I am impressed. Do you have a dimensional drawing?

[@carpentak]

There are no drawings. Dimensions are not important here. The key is to lay out the correct center line and angles accurately from the center.

[@guidokotters3614]

🙋‍♂️👍👍👍👍👍👍👍👍👏👏

[@olibass6010]

Great job👍🏻 You are using the insert the wrong way. Turn the knob so that the flange is on top, visible. It‘s not good looking but mechanicaly right, so the flange gets pulled against the knob when tightened. Otherwise you‘ll pull the knob and the insert apart. Good luck👋🏻

[@carpentak]

You are right. So I use instant glue there to prevent it coming off. thank you

[@olibass6010]

@@carpentak yes, I‘ve well noticed that but a drop of glue might not withstand great torque? At least this is my experience with very same thing😉 By inlaying the flange one can achive a better look? 👋🏻