Make It Yours: Massey Ferguson 4707 Global Series: How can You Pimp Your Massey Ferguson Tractor?

Customizing your tractor to your needs is one of the value added services of Massey Ferguson Dealers. Especially if in West Central Missouri in Higginsville Missouri...Vahrenberg Implement Implement. We don't just sell you a tractor we sell you a tractor the way you need it with the accessories you want and install them.
Check out this Massey Ferguson 4707 Global Series we added some cool additions from AGCO Parts and Sparex both Part of the AGCO Corporation:
52" LED Light Bar (Sparex): S.119437
LED Worklights (Sparex): S.151855
Overview Quad Monitor & 2 Cameras (AGCO Parts): DMOV-7MQC2
AM/FM/WB/ Bluetooth Radio (AGCO Parts): RE710717D6
Front Hitch (AGCO Parts): ACW0026370
RAM Mount (AGCO Parts):
U-Bolt Ball Mount: 72516645
Connector: 524334D1
Ball Mount: 71408379
Coolant Heater (AGCO Parts): V836640935
3rd Function Kit (AGCO Parts): ACP0296880
Loader Lights (AGCO Parts): ACP0351720
Loader Light Switch (AGCO Parts): ACP0297690
2nd Cup Holder (AGCO Parts): ACW2380100, ACW6460380, ACW2340950
Hydraulic Remote Caps (AGCO Parts) Numerous Part Numbers
Hose: ACW0606620 (3 Remotes) or ACW060629A (2 Remotes)
Top Coupler Caps: 4355899M2
Bottom Coupler Caps: 4355900M2
Black + Plug: 4270220M1
Black - Plug: 4270221M1
Green + Plug: 4270216M1
Green - Plug: 4270217M1
Red + Plug: 4270214M1
Red - Plug: 4270215M1
Yellow + Plug: 4270218M1
Yellow - Plug: 4270219M1
Purple + Plug: 4374009M1
Purple - Plug: 4374010M1
Brown + Plug: 4374007M1
Brown - Plug: 4374008M1
Not shown in Video but Color Identification for Remote Lever
Black: 3787597M2
Green: 3787599M2
Red: 3787598M2
Yellow: 3787596M2
Purple: 4377408M2
Brown: 4377410M2
Visit your local Massey Ferguson Dealer to order your Accessories!
If near Kansas City Missouri come visit Vahrenberg Implement in Higginsville, MO or Online at www.vahrenberg.com
Join us on Facebook: / vahrenbergimplement
Visit our Information Resource Form: vitractorworld.proboards.com/

[@Efemedio1]

This tractor is just "bad to the bone!" Simply beautiful! You all are an amazing dealership! Thank you for the content!

[@VahrenbergImplement]

Our Customer added some really cool options to make it his own and was fun helping him get it just the way he wanted it. Thanks for the comments and thanks for watching!

[@jerrysalgat3406]

That is one very nice tractor. Thanks for showing it.

[@VahrenbergImplement]

Thanks for watching! He's done some cool mods.

[@timnezbeth1321]

I really enjoy your videos ! I learn a lot, just watching and listening. Thank you & keep 'em coming!

[@VahrenbergImplement]

Thanks, will do! Thanks for taking the time to Comment! We appreciate it.

[@ironhead782]

I am glad you mention weight. I am a Massey guy but I did look at other tractors. This 4607 is 2,000lbs heavier than the Kubota 7060 which is in the same HP class as this one. More weight, means more traction. The MF wins hands down.

[@VahrenbergImplement]

Yes better traction with the radial tires. And safer lifting with loader without having to spend even more money to ballast the tractor for the load.

[@brianhall9254]

This is all so a nice tractor i bought a 6713. This sprig and love it these tractors are so well made .

[@VahrenbergImplement]

They sure are...we sell lots of the Global Series: 4700, 5700 & 6700 Series Tractors. Offer lots of Features for the Dollar!!! Thanks for watching & commenting.

[@ACF6180T]

Pretty cool! I can tell this owner has allot of seat time plans for this tractor & if your going to be on it for long hours you might as well be comfortable being one with your M-F tractor, Thanks for the video.

[@VahrenbergImplement]

That's the plan! To make his time more efficient.

[@dakotamicro]

So awesome!!! ...and can we just say, we love your choice of camera systems 😉

[@VahrenbergImplement]

Thank you so much 😁, We love selling Dakota Micro Products that help make happy customers!

[@dougdunlap6890]

Nice !!!👍🏻

[@VahrenbergImplement]

Thanks for watching and commenting.

[@espacef1fan]

I enjoyed this video. I don’t know if I am speaking for anyone else, but, I would love it if you did videos like this for all the tractor mods you do.

[@VahrenbergImplement]

We are trying to feature options and customizations we are doing. Have a Couple others we have done recently. 4710 Dyna2: kzbin.info/www/bejne/eqizepuNnq-bmNU 2860E SS with CB85: kzbin.info/www/bejne/jqnNgKetmZWgZsk Maybe we can review the videos we have done and add customized to the video description to make it easier to find or add them to our AGCO Parts Playlist too. Thanks for the idea and taking the time to comment.

[@madtater5948]

that is an extremely nice tractor

[@VahrenbergImplement]

We think so too! They are selling faster than we can keep them instock and on order. Thanks for watching and commenting.

[@alancummings5651]

Awesome tractor

[@VahrenbergImplement]

We think so too! They been super reliable and great performers. Thanks for the comments and watching

[@alancummings5651]

@@VahrenbergImplement growing up we ran Massey Ferguson equipment from tractors, to rakes and balers. My dad had a 240 with over 9000 hours before it finally died. It probably needs a new injection system but it was bulletproof.

[@danielsnyder2288]

Is there a place to put a fire extinguisher on this and if so AGCO part numbers?

[@VahrenbergImplement]

Some use the Cargo Storage next to the seat to carry smaller dry chemical based extinguisher or baler operators are installing compressed water extinguishers on the Baler or could customize to mount on tractor too. Depends on size of extinguisher and type you are wanting to carry.

[@brianseidel9712]

What is the PN for the front receiver hitch and will it work with the 931X loader? For frt clearance?

[@VahrenbergImplement]

Front Hitch (AGCO Parts): ACW0026370 We listed all the AGCO Part Numbers in the description if you need other items. I have not tried on 931X Loader and do not know if it has the clearance to use with that loader installed at the same time.

[@travisendlich8176]

Do you have part numbers for the hydraulic caps? We have been looking for them and my dealer can not find them! I'd appreciate any help with that.

[@VahrenbergImplement]

Look at 4710 Parts Book#6246203. Section/Page 09-0020 Oil Recovery Parts there are lots of part numbers to order individual pieces.

[@travisendlich8176]

@@VahrenbergImplement thank you for the information. Your videos are great. Lots of good information!

[@lisebrunelle6671]

Do you have a part number for the rear work lights? Thanks

[@VahrenbergImplement]

We have all the part numbers in the Video Description. Here is the Sparex LED Worklight: LED Worklights (Sparex): S.151855

[@farmall1farmall132]

Nice video again.. all I need to do to pimp my Massey out is sit on it.

[@VahrenbergImplement]

Heck Yeah... that's the best Pimp!

[@farmerboy4744]

I recently purchased a 4709 and had the valve flip covers added....however, the first time I used them they fell off. Is there a certain way that these lock in somehow? Not too impressed with how they are supposed to attach...Any help would be greatly appreciated.

[@VahrenbergImplement]

Yes the AGCO Parts Coupler Covers shown in this video snap into the coupler groove. Must make sure they snap into the groove and the Coupler Covers have a Male & Female Cover and they mush attach together. Sounds like they didn't get snapped into the groove. They not easy to get off once installed correctly.

[@farmerboy4744]

I will try and see if I can get them snapped in correctly...both sides fell off...looks like there is a rubber washer that fits in there too. Obviously, I don't have a lot of confidence in my dealer. Also, IMO, they installed the third function upside down (remote couplers are facing towards the ground) and the backside of my bale spear (back of the top spear with nut) hits one of the couplers when it's tilted all the way back. Seems like the couplers should be facing upwards to be easier to connect attachments and not interfere with them. They also installed another joystick 3rd function kit and did not use the original joystick that was already standard equipment....I felt like parts were not available or they cut corners and they never would explain why they changed out the original 3rd function joystick. Anyway, I sincerely appreciate your quick responses and guidance. You do an awesome job with your videos...keep them coming! Thanks again...

[@VahrenbergImplement]

Hopefully they used the Original AGCO Parts Coupler Caps too. There some aftermarket caps that are just flip caps and don't have the oil catch system. There are some after market third functions but why we prefer to only install Original is because they guaranteed to work and work with the Original Equipment Implements. I would ask your dealer to check out what they did. Guarantee my customers would.

[@redstonepenguin9134]

Is there a seat cover available thru Agco?

[@VahrenbergImplement]

They have some really cool ones in AGCO Parts in Europe. I have had customers order from this dealer in United Kingdom: www.farmingparts.com/tractor-parts/cabin-body-panels/seats-covers/seat-covers.html

[@94mattforrest]

Is this camera system available on other Massey Ferguson models?

[@VahrenbergImplement]

The Overview Camera System is available from AGCO Parts and can be used on any model or anything that you want to add Camera System. Just need Power Source and Metal Surface for Magnet Mount Camera or physically attaching cameras to non-metallic surfaces.

[@94mattforrest]

@@VahrenbergImplement thank you

[@94mattforrest]

@@VahrenbergImplement do you know the price on this model of camera package? Thanks

[@VahrenbergImplement]

Current Price (10/04/2021) is $622.00 for the DMOV-7MQC2 Camera System. Plus RAM Mount to install on cab door.

[@94mattforrest]

@@VahrenbergImplement thanks

[@inthewoods5640]

What’s the MSRP 60k or so?

[@VahrenbergImplement]

Depend on Cash or Low Rate Finance Program Pricing but your in the area. Less for Cash Prices. Depends on features and options you add to the tractor.