Make realistic dry mud on a tank model - VMS Alkyd binders weathering Tutorial Part 1

[@ortiz5922]

I know it's just a product demo but I would've removed just a 10% and done 😂😂 it looked beautiful. I would've even fixed those scraped chunks of paste that looked so beautiful and earthy instead of blowing them 😂. Great stuff VMS I love your varnish! Best on the market

[@Vmssupplies]

Cheers mate! Chris

[@Hey_MikeZeroEcho22P]

Brillant!! I plan on purchasing most of these items...... MayBe.... I'll show, here, the results of All Three (3) tutorial videos.🤔

[@Vmssupplies]

Yes the final video shows all effects combined and anybody can do it. 😀

[@thepiratepenguin4465]

I deeply appreciate the mud and dust effects on my AFV kits and dioramas, although I sometimes go overboard. In the past, I’ve experimented with acrylic, enamel, and oil-based products to replicate these effects, but I’ve never been delighted with the results. The Alkyd binder method seems promising, and I’m eager to explore it further.

[@Vmssupplies]

Hi, Alkyds look even better in reality. I advise you take some spare tank road wheels, paint them and experiment on them, this is a lot of fun and a great way to get the hang of things before you move on to an actual model. Thanks a lot for your feedback, Chris

[@romanspurs9225]

Love this stuff

[@Vmssupplies]

Cheers, glad it worked out for you! Chris

[@modellfrickler1883]

Will I get the same with matt varnish? Or can I varnish after the mud or will it destroy the appearance?

[@Vmssupplies]

On matte varnish the removal is a bit harder and the surface may be a bit more susceptible to pigments, that is change the shade more, but it should be OK. Varnishing over pigment jobs is always leading to a huge difference in appearance, not advised - the binders already hold your pigments in place.

[@Lotnik102]

Ok i tried this as a demo said. But to be honest it isn't easy as it looks. When i try to use Universal Weatherin Carrier to remove mud and revail original paint it was very hard to remove. The mud smudge all the time and my tank is mostly brown now. Meyby i put to less protection layers from satin top coat. I dont know. On my next project i will put 3 layers and than i will see whether will be easier to revail orginal paint or not.

[@Vmssupplies]

Hello, if the pigment filter effect is too strong please employ our Stain Remove product, bare paint will show: kzbin.info/www/bejne/bHTHpKJ4l7Glo6M Happy modelling, Chris

[@jackatr5048]

Good morning. How I do buy you products? Do you send to Brazil? Tk’s

[@Vmssupplies]

Please visit: www.vms-supplies.com/buy-now

[@robertknox1964]

Why put so much on the model if you’re only going to scrape it off?

[@Vmssupplies]

It's a sacrificial layer. Through this removal we replicate what is happening to actual mud flaking off of a vehicle.

[@W98Dragon]

@@Vmssupplies is the removed pigment reusable? I wouldnt feel good about "wasting" so much of your good pigments

[@Vmssupplies]

Yes, you can reuse it no problem, either use bigger chunks which make great texturing material for a diorama or just crush them back to powder form. BTW our jars hold 45 ml (biggest in the industry) so it's not like you will run out quickly even if you use them a lot.