Man I want to get ancairbrush just to try this

Can Metal Prep 4k be airbrushed onto complex surfaces, or is it only suitsble for brushing?

Tell me why delivery charges to the Uk cost $9,999,999.00💀 what a scam

Great Video, before I buy, I am just curious about how long does it take for the PE part to be somewhat firmly attached? Because I usually want to move on to the next step of assembly and I don't want to waste time by letting it dry for 24 hours. Does it pretty much get solidly attached in a minute or you have to wait for 24 hours? Thanks in advance for answering.

It's really a good product, I spread this with my brushes and I leave it for about 30 min there, it takes off about 80% of the paint. I will try with softer brushes if they help the efficiency of this product. I put this in a spray bottle, but I regretted, it wasn't useful. Maybe a sponge will do the trick, but I'll see

Hi, newbie question here - when you spray the model, do you spray the entire thing? or do you spray in sections? I'm asking as it seems like the self levelling of the product would pool at the bottom of the sides (due to gravity) unless you place the model side up. Hope that makes sense?

i like this! but cant find this product or in amozon.

I’d say that it’s very much like chocolate brownie icing. Thank you VMS

Can you use the alkyd binder with 3D printed resin tracks?

With the debonder how big of a risk is it that with cleaning glue parts also the PE parts will get loose again?

good product！but i don‘t konw how to buy this,so sad QAQ

Thanks Dude!

Best liquid mask I have tried.

Und das löst auch nicht den Kleber auf der die Teile zusammenhält?

Nice tip, I will have to find some of this glue and try it out. At present I am using a 5 minute epoxy with better results then CA glue.

Can I varnish with a brush?

Hello, what are the signs that alerts you when a new bottle should be bought?

Can the 3D glue be used with photo etch?

Can you recommend a glue that can bond painted surface to panted surface without sanding

can this work with gunpla?

This looks like you added an oil based crayon to it beforehand,if this strips the varnish off as well,its seems to be a bit sketchy,convince me otherwise as your products are not cheap. Thanks

Think a couple steps were skipped. And yes I did watch part one.

Użyłem dziś pierwszy raz i muszę powiedzieć że jestem pod bardzo dużym wrażeniem produktu. Super efekt 😃🤝🥇🏆

My favourite satin varnish!

Can this product be used on metal miniatures?

I've just used this product for the first time (ultra). Model is a Tamiya car body with a few layers of Vallejo water based, Tamiya acrylic and humbrol enamel. Compounded errors. Time to start again. Paint began to peel very quickly. I haven't soaked it but have gingerly applied product with a paint brush. Vallejo base coat and primer left which I will try again. My observation so far is that it is working but I wouldn't recommend this product for children. If you can, apply product outdoors with plenty of ventilation. Wear a respirator minimum P2 and gloves resistant to solvents. I began applying this indoors without a mask and the smell quickly took hold of me making me feel a little dizzy.

I wonder how well these would turn out placed inside a ultrasonic cleaner for a short time.

Videos just get better and better Chris, I prefer the sound off and captions , that voice is most off putting !

Would this debonder work on a vinyl toy figure without messing up the paint?

Really cool tutorial.

How you clean the brush? Thx

No-one who's ever driven or been in/on an AFV would drape a tarp as casually as most modellers do. I understand the technique but honestly... it's really naff and unrealistic. Ever seen a tarp or cam net after it's been anyway near a hot surface such as engine louvres or exhausts, or been dragged into the running gear? My unit rolled and strapped everything down - tight; like professionals would. Imagine driving through woodland or scrub and having anything not tied down ripped off. In my honest opinion it makes it look like, well, a model.

When you don’t have a .4 nozzle but a .3, is it possible to thin the satin varnish with water or tamiya lacquer thinner retarder type?

what would be the best and cheapest option to glue on a headlight to a car without the glue showing clouding

I have had this happen to me twice now, and i was hopeing you could tell me why. Using a thin ca, (not your brand) to glue 1/2 x 2 inch pieces of pe into a rectangle of fairly thick styrene caused the styrene frame to just break apart into three pieces. I didnt clamp it, or drop it, it just broke apart. Any thoughts?

question about clear parts i use humbrol clear fix do i really have to leave it for 24hours for it dry ?

are these hd varnishes lacquer or waterbased acrylics?

Is it a one time use fluid?

can you use this on ammo migs waterbased acrylic paints?(with either a vallejo gloss or a matt varnish from ammo)

Interesting tutorial. Product seems fine, but 1/700 scale PE needs much finer applicator tools. Be curious as to the curing time?

Does it need to be thinned in an airbrush. Mine is 0.2mm

I glued the landing gear on backwards. I used super glue. Will this help remove them?

Perfect video. I did all the mistakes on my first project. Now I know what happend, thanks! Subscribed.

Very informative. Great video. Thanks.

I deeply appreciate the mud and dust effects on my AFV kits and dioramas, although I sometimes go overboard. In the past, I’ve experimented with acrylic, enamel, and oil-based products to replicate these effects, but I’ve never been delighted with the results. The Alkyd binder method seems promising, and I’m eager to explore it further.

This seems to be just what I've been looking for. I ruined a Revell VW Camper van by having glue stained windows before I knew about this product. I will give this a try.

Phenomenal stuff, just a question though. What would be the main advantages compared to just using graphite powder? Thanks in advance :)

One problem I've had with all super glues in the past is that it eventually dries and can no longer be used (even cleaning the nozzle doesn't help since the bottle completely dries out). Do you have an estimated shelf-life (after opening) for this? edt: oh just found the FAQ, 12-24 months

Yeah metal tracks are the way to go. Unless its a special application.

Great video. One tip - set the drill bit depth in the pin vise so that you can use the pin vise as a drill stop, Adjust the protruding bit so that when the pin vise bottoms out on the track, the depth is just shy of breaking through. Saves scrapping links, and keeps from stabbing your fingers.