MAKE THIS SEQUENTIAL SHIFTER USB | DIY SIM RACING

[@dylanearly3705]

1st Comment! Love the vids, keep up the great work. : )

[@amstudioprojects]

Thanks!

[@hansen9466]

amstudio did you find me om steam

[@francisweimer6320]

is it possible to also use a 4/8 way joystick, cuz its much cheaper than the one you used? also keep up your vids!

[@gigioconio]

I did it today.... But with some little changes. The round zippy plastic cover I putted over the metal plate. But most important its a Oring of 25x3mm putted behind the joystick over the 2x4x8 plastic so the shifter get harder.. where I can send you photos?

[@amstudioprojects]

+Gigio Conio Nice work , you can send the pictures to my business email found on my channel.

[@KimNabi_cat]

OMG he's putting sim companies out of business! :)

[@IBCMTB]

No kidding!!

[@gxtgaming8352]

Love this setup! proof that you don't need an expensive rig to do some serious sim racing !

[@DerGermanHD]

Start your own Buisness and call it something like amStudios Sim Racing pls and you would get high up there

[@godvsevolutionmythgodvsevo1038]

So true

[@garyrobinson7128]

I got the parts today and it took 5 minutes to put together! works fantastic saved me lots of cash thank you!

[@dahlinc]

please start selling. we are all to lazy to do it ourselfs

[@zomgdave]

cha1k D for the love of all things please sell these

[@bigsmoke6975]

cha1k D So true

[@souk-tv]

lol..

[@gushax]

I would definitely buy this too.

[@santiago3978]

Please

[@MyPAPAH1]

Ordered this , got it, built it, took 15mins to build and bolt to table, many thanks amstudio

[@yasmeenpathan6210]

Can you tell item names

[@jus4027]

Dude, seriously good stuff, just watched your vids, 5 back to back. Love the usb convertors to abstract the logitech control away. Awesome.

[@justinw852]

you could also make this a handbrake

[@herrlogan17]

Just made it, 2 hours work. But only with wood and standard red ball stick, not as fancy as yours :) Thank you for the tip, actually this mame button set is lying under my table for couple of years! What was I thinking :)

[@hansyang1697]

Looks neat. Those extra micro switches can make a handbrake mod.

[@tracksgaming1123]

Finally!! I have looked forward to this video for so long. Geat work! KEEP IT UP!

[@tracksgaming1123]

I am just wondering about 1 thing: could u have connected the sequential gear the same way u did with the diy handbrake? By using a keyboard PCB? and what about a rig/desktop showcase video?

[@amstudioprojects]

Yes can use a keyboard PCB as well

[@jesperpedersen8952]

Maybe its about time i get myself a proper pc. I need this !! Nice vid mate

[@3toinsanity]

i made a sequential shifter using a keyboard i found at the thrift store. I've succesfully completed a fully DIY cardboard racing sim rig. using cardboard, hot glue, tape, a computer mouse (wheel) pedals (Bluetooth xbox remote) and shifter ($3 keyboard)

[@santosvandenbroek248]

Can you put links to where you buy all of the stuff? Btw great video's man! keep it up!!!!

[@StanleyKubick1]

*videos

[@domenicoR_]

Hello this shifter is compatible with thrumaster tmx?

[@Lobbi_SM]

As always, a very nice build! you deserve more subs man😆 you got great videos!

[@lksa983a]

Did you mount that to the edge of the table and if you did then can you share how? Don't want to drill anything to the table so I was thinking about some sort of clamp setup but have not figured out a good solution yet.

[@gabor222]

But why do you put the cover UNDER the mounting plate at 1:43 ?

[@kueto27]

Eres un genio! he comprado hoy el joystick en ebay por 12€ y sustituire el encoder USB por un arduino leonardo que tengo, asi ademas hago la botonera y el freno de mano progresivo todo con un mismo circuito. Gracias y un saludo desde España!

[@vexedpixels]

Can you make a video on Dials with (hands I guess) don't know the name. Like a real tach. Awesome vid man

[@amstudioprojects]

Sure thing!

[@vexedpixels]

amstudio tysm dude, that's awesome XD

[@dustinryan6395]

amstudio is it possible to wire a momentary switch to the square button on the Logitech g29?

[@dra6o0n]

I was wondering, since the shifters basically is programmed to go up or a down a gear based on two button inputs, what if you turn those USB programmable keypads that are 2 buttons, into a lever based mechanism in a box? You could even use a gear or pulley system to mechanically move connected levers and joints to press said button, or it could be a 3d printed project. Something akin to those Sega Arcade driving shifters for Initial D. 3D print an enclosure, use more Springs and joints to determine how a lever moves and is pushed back to neutral.

[@kratoz_858]

thats a $30 kit. with 10 buttons incuded. you can also make a diy button box for your rig.

[@turbodurbo666]

that's what I was thinking!

[@douglasSN1]

I use the same system to make a hand brake, but it does not work at all games. Could you explain how to make it work with g27 / 29 / etc?

[@ryantipsord1863]

I know you didn’t used to do voice overs. But now could you put a transcript in the description of what you would have said on your older videos.

[@thoktrigg3308]

Actually doing this rn and gonna laser cut a box to make it look good for my new setup (thx for the diy idea)

[@krastinsarturs]

great video bud! hey was the M10 adapter custom taped for the joystick thread or were you able to order it somewhere?

[@SMFaction]

This is great, does anyone have a link to the extension bolt he adds at 3:15?

[@Kid_Strange]

Hey! I was wondering if you still had this shifter and if it would be possible to get a couple of pictures showing where you tucked the board and how you mount it. Also was wondering where did you get the plate for it?

[@dziga9629]

Your setup is awesome!

[@francismaheu158]

Been searching for the "M10 bolt with taped thread - M6x1 internal" for weeks. Does anybody know where to find one? I got all the parts except that one and I'm going crazy.

[@joshandrew9067]

make one

[@pirozcontractor6006]

I finally completed this build! Thanks so much Except I really had no way of finding the screw thread so I just had to use one of the adaptors with my stick, hammer it in, and hope it stays (it still is). Pl can u link the screw thread adapter?

[@andrewbonhomme8069]

Yes I’m struggling to find that too. Stopped my build

[@Matthewrandone]

i didnt get a notification for your upload :( awesome video im gonna defiently add this to the sim.

[@jonlamontagne]

A few of the pieces are no longer available from the links you provided is there a chance we could have a parts list and go searching for them as well? Thank you for the video, help and your time!!!

[@maddog3814]

Hi, can tell me where i can buy the extension male female for gear knob? Thx.

[@Bobbb_b]

How did you mount your projects to your desk/monitor? I made the sequential shifter recently , but I can't mount it easy to my desk.

[@djkasio]

Same here

[@eduardotejeda]

Try C clamps.

[@nicolapontillo2029]

Hi I can't understand what you used to make the gear lever extension, can you send me a product link? Thank you

[@paullenz7617]

What thread size is the mountig for the shiftknob Did you made the adapder by yourslef

[@damongill1120]

Where did you get your bolt from to extend the shaft height?

[@Supremoohh]

I guess no problem to connect it with arduino instead an arcade usb interface right? Great channel,love to see more projects in future (I also have an E36 dash on the way :D). Ty for sharing!

[@danielesse8728]

Hi! thanks for your video! Could you tell me what tipe of gear shift extender I need?

[@SikkRaz3r]

Did you find it lol?

[@Renagade9966]

Next DIY 3 monitor stand ... those are way to far from your wheel to get a good FOV. all you other stuff is really nice. I would make them if I knew where to get all the pieces.

[@ThePvthfinder]

Making one of these too, at the end of the month! Thanks again AmStudio.

[@denniswilson372]

im about to start this actually...so this will work with thrustmaster as well..you will have to take the wheel apart and solder the switch wires to the corrisponding shift paddle..but really do able. i'll respond when im done...

[@stantonlagua308]

so awesome! im going to build this. how did you mount this?

[@botbelem]

Please show how you set the shifter on table

[@PPablinho]

Now i need to find that gate for the joystick

[@morbid1.]

can you turn that joystic into hand break? In theory you just block 1 additional way of movement leaving only back

[@amstudioprojects]

Sure can, You will need to block or make a new one way bottom plate.

[@Bananovskyyy]

now H-pattern plus clutch pedal?

[@androiduseriosfighther5610]

Bananovskyy he has a clutch and h shifter, he make a sequental shifter. if he drive he used homemade sequental shifter and clutch

[@AlphaM0dZ]

just wondering where you found the bolt adapter so easily

[@Having-a-go]

look at honda gear stick extension they are m10 and loads of options.

[@AlphaM0dZ]

Dwick awesome thanks

[@amstudioprojects]

I made the adapter, decide which gear knob you are using first as there is a few different thread sizes and pitch.

[@AlphaM0dZ]

just wondering is it the arcade joystick that is m10 or the part that you screw the shifter knob on cause i was looking at the honda shifters an those are m10 and just need an extension then

[@soba5118]

m oltmanns S

[@angelocortese6768]

how did you fix the change?

[@Owl-ge9jl]

where can we find the adapter at 3:14?

[@yannickvenken362]

Can you also connect this one to a thrustmaster t150pro by using a 6-pin DIN cable?

[@rdo_drift]

The carbon fiber part is not available anymore, could you tell me the name of the piece please? Also, how did you mount it to your desk? Thank you!

[@CrazyOldGamerLive]

Love it, but why go thru the trouble of removing the switches instead of just leaving them disconnected?

[@Eduardog1975]

How many digital inputs can have a Arduino nano, I want mean with any tecnique like multiplexado or other

[@worstenbroodje6832]

Where you get the carbon fiber

[@aaron_5349]

This shifter works with an Thrustmaster T80?

[@iambradderzq2]

Could you make a handbrake like this

[@DMYTROCBRrrSP]

Hi I did everything as you showed in the video, there is a problem it switches itself without pressing, I use direct drive, you can help me figure it out? pls

[@joeymart1n]

Could you give me an exact link for the attachment to add the shifter please

[@sebken8528]

any solution for the plastic plate that gives the stiffness ? mine broke

[@sameezls]

What size hole did you make on the carbon plate Thanks

[@reezoosourryo6213]

Man you are a god diy for sim racing im a french and i love you :) but the H-Shifter is the next ? :) :) Respect and continue you'r vidéo

[@AlphaM0dZ]

Could you show how you mounted this to the desk by chance

[@amstudioprojects]

Its a small metal bracket which bolts onto the handbrake table mount.

[@OrganizedReactions]

cool. i'm trying to make one similar to your analog handbrake mod. just waiting for more parts to arrive in the mail.

[@2001maurits]

can you use a pcb from an old keyboard like in your video of the DIY handbrake?

[@amstudioprojects]

Yes, just check you can assign the keys in game.

[@2001maurits]

oke thanks, keep up the good videos!

[@pacoxufa33]

where did you buy the adaptor for the gear knob?

[@owenatkin3148]

Where do you get the adapter for the shifter handle?

[@owenatkin3148]

I think I found a suitable fitting. Not sure, might have to have it machined

[@jbank4394]

Hi imterested in using this for my Logitech G27 sequential shifter. I already know where to solder onto the G27, but on the joystick I was trying to figure out where would my soldering points would be, but i guess i can just connect the wires like you did in the video, and then just solder them to the G27.

[@theonlykolos]

If I don’t want to do the carbon fiber part I don’t need the m5 bolts or rubber o ring do I?

[@turbo-vtec]

what was used for the extension looking to make the joystick a bit more longer

[@jamesbehra2690]

Awesome job. The Carbon plate link is no longer available any clue where to find it? Also would you pls tell me how did you sitck the joystick to the desk? Cheers!

[@kayele]

Where can I get the speedometer you have unde the monitor?

[@Dehumanization001]

Can you take DIY shifter you made here and use that for a handbrake just make it one come back in one direction?

[@blockfifteen]

please post an entire setup video PLEASE

[@Bobbb_b]

Nice video again. I got a question, not about this thing but in general. Which GPU do you have? Maybe I want 3 monitors for racing too.

[@BDGaming1100]

@amstudio do you by any chance know the thread size of the arcade stick?

[@user-wd1cd4eu8e]

Name of this 3:16? me english is good but i don't know some things so can you say to me what's ir that?

[@user-wd1cd4eu8e]

And where i can buy it

[@harleyaleckson2926]

How did you clamp it to the table Thank you

[@Wetfingers]

How did you mount it? That’s the only issue holding me back right now 😫

[@muhammadzihni3801]

Same here... :(

[@angryguy6624]

lol wetfingets xD

[@Wetfingers]

Angry guy what’s up haha

[@basstrammel1322]

I would use the bolts holding the carbon fibre cover? Or maybe the two holes in the metal plate.

[@theonlykolos]

Did you have to program/wire it to a specific button or it automatically knows it’s a shifter*?

[@agustinbianchi7559]

Hi! I see you can use it on ac but I cannot do that, I am no using same controller but mine does recognise imputs as if they were from keyboard. Any help?

[@gnokketto7423]

Love this mod, but on assetto corsa only one button is assign for up and down, if use this don't use the paddle on the wheel correct ?

[@paulcallaghan3774]

Is soldering something like this into the g29 pretty straight forward? I have a PS4 and not a PC so I doubt USB devices will work in the same way which means I'd have to incorporate them into the G29. I have watched a few of your videos and am being inspired to better my own setup using your methods.

[@gnokketto7423]

Great! support for mounting at desk or Playseast ?

[@vladeck2204]

What model of LG monitors are you using for your setup? Is the center one debezeled, or is it just overlapping the side ones?

[@gurtner]

Please tell me hows the feel of it, im currently using a joystick as a shifter/handbrake, does this have a better "feel" when ripping it on track?

[@jarrodcrase4562]

Where did you find the gear shift extension?

[@Elementpunx]

Hello. Love your vids but im shit at making stuff. Altho i have a question. What are those monitors size? 24 or 27?

[@amstudioprojects]

27"

[@enochcampbell9711]

made this but cant find the M10 bolt with taped thread - M6x1 internal. where did you get this from?

[@jtjorger]

Were you ever able to find it and how does it work?

[@iliosOFFICIAL]

Works great, I finally upgraded to a Thrustmaster shifter. But this worked good for about a year. I never found the bolt to add the factory shifter. But I made it work anyway.

[@SimonVdD]

Can you make a handbrake out of this ? And what is the thing you plugged the cables in ?

[@amstudioprojects]

Yes it could be used as a basic handbrake. Plugged into a USB zero delay encoder.

[@SimonVdD]

Can you plug the USB port in a PS4 and use it with the wheel ?

[@TenkaraOnTwo]

Wondering if you ever gave this a shot with the PS4?

[@fudd]

SimonV did you ever try it with the PS4?

[@fudd]

SimonV did you ever try it with PS4?

[@przemogaming5324]

Hi, where did you get the little green resistance from??

[@dsoms]

@amstudio Amazing! Nice work. I own the Logitech G920, do you know if it's possible to wire the paddle shifter buttons in the PCB to be used with this shifter? I know it's possible to wire some other buttons but not these ones. Thank you!

[@FreakCanal]

A video about screw and unscrew. Amazing

[@Nathan-vb5ys]

Hello, once you wire it up and plug it into the usb, how do you set the switch to the button you want to use in game

[@r54dbnn]

what was that thread adapter you put on for the shift knob?

[@glgtv2144]

Another amazing video bro! Instant sub!

[@benfawcett2840]

@amstudio would it be possible to plug this into the up and down ports on the board?

[@albertoloni37]

Can i wire it directly into the wheel? X and b button for gear shift or down

[@jbank4394]

where did you get the M10 bolt with taped thread?