DIY USB Sequential Shifter with Realistic Mechanical Feeling & Sound

[@CrashD6]

This is one of the most satisfying sim racing related videos I have ever seen, the build quality is very strong and well done, and the only thing that could break are the switches, which are easy to find and replace, the rest is built like a tank, you could make money selling those!

[@IMSimplyPakistani]

That's an awesome job buddy, you have some serious skills and resources too, that's bit difficult as a DIY project as most of us don't have access to steel workshop for building the steel framework. Excellent quality work

[@agusground]

uniq parts is a ball with spring loaded, out of my mind...! genious guy you're

[@ZingZingNZ]

This is sick, I wish I had the skill to do this.. you have talent. I want to see more videos.

[@velocimech273]

Thank you very much mate.....

[@vertex_pixel]

This really is next level. It sound amazing when you shift and it hits metal. Hope of seeing some instructions. If not I will try to reverse engineer your design. Thanks for sharing anyhow.

[@togera77]

wow. awesome. can you provide a list with all of the components? I would like to build one. it would be so satisfying to use this in the RSS GT cars on Assetto Corsa with a long shift lever

[@sandroelbosca811]

Bellissimo DIY , Bravo ;) Grazie per aver condiviso, TOP video.

[@davidpardy]

Great job! I don't have any real fabrication skills or the right equipment to work with steel, but I'll certainly have a good crack at doing this with plywood :) thanks for the inspiration!

[@dylanmosley3030]

Late to the party. Wanted to say thanks for the video- there are plenty of good ideas there.

[@eragoss]

Hey, awesome DIY. Very well executed and the finished product looks quite professional and solid. I was toying with the idea of building my own shifter so now i'm defenitly giving this a try. Thou i don't have the machines like you i think this build can be done without welding. I just need to figure out how to make the grooves for the ball plunger without a lathe machine. But thanks for this great guide, really speeds up the process of building the piece.

[@velocimech273]

Thank alot mate. hope you will finish yours one soon...

[@eragoss]

@@velocimech273 Thank you, but due to limited free time the build will proberbly take a few weeks, but i'm positive i'll get there eventually. Any recomendations regarding the spring? That's my biggest Question mark right now.

[@velocimech273]

No need to worry that much about spring.plunger will give you the feeling.but make sure not to use high stiffness springs. Otherwise you have put additional effort to change the gear. Use a spring only to return the lever.

[@isuzu_bryan]

How much to purchase if you were to build another item? An where you based i need one of the immediately good sir!! And you make handbrake aswell need to be compatible with PS4 PLZ cheers mate

[@rbphotographyyoutube]

Considering how much fabrication, machining, welding etc this has I don't think calling it "DIY" is fair. BUT. Your design, skills, and finished product is AMAZING! It's a really amazing design - looks and sounds fantastic! You should consider selling them on eBay!

[@sweetleafstreams5271]

Great design! Well done

[@avioniperformance]

amazing job. if only i had the tools and skills to work with metal like that i would use this video you made to make it as well.

[@velocimech273]

Thanks alot mate.....😊

[@MarkusMarkus-x2z]

Is there a list of items needed ? including wps for metal parts ?

[@Typicalurban]

how much woude it cost to let you make that shifter with sending to belgium ?

[@diegotizzi3904]

Congratulations! amazing work!

[@jarekk8533]

Wow. Amazing shifter!

[@MRMD1srl]

ඒකනම් සුපිරි අයියේ.. Amazing 😍😍

[@velocimech273]

Thanks alot....😊

[@elamriti]

any build plans ? or parts list ?

[@juanpablomussi2597]

Excuse me...i dont find the code. Could you give me the link o the file? Thanks

[@ChanakaRathnayake]

Superb as always 🔥

[@aquaman329]

Can you draw up some sort of schematics for it by any chance? I do HVAC for a living and can build it np. just need some measurements of he side plates at lease and the rest im sure i can figure out

[@mfrophoto]

Im gonna build one, definetly! Thanks for tut🙏

[@j.l.h.kennepohl2691]

Hi do you have te plan and bom of the shifter ?

[@mfrophoto]

@@j.l.h.kennepohl2691 i have got a 3D Build (google sketchup) send me a mail @ [e-mail] and i will send you the file next days.

[@j.l.h.kennepohl2691]

@@mfrophoto i send you one 👍🏻

[@meteorrock4009]

Good job broo..this very fantastic.. Goooooooddd joooob!!!!!👍👍👍👍👍👍👍

[@LZRMATZ]

Looks like Bangood has this exact shifter for sale now, hope u got some of the cred for that.

[@elamriti]

u can use a usb arcade encoder

[@mihaleban1323]

Probably j made myself a bandbrake with it and it works fine

[@lafamille2839]

Bonjour superbe shifter avait vous fichier dfx pour faire ce beau shifter

[@cybernetix86]

Dude! with some minor polishing you could sell a ton of those! Great work

[@NigelReubenRacing]

Hi. Do you have a list of dimensions for this? I would love to make it and dimensions would be a great help

[@mihaleban1323]

hi i think his design is based on this aliexpress shifter the mecanism is very similar and the frame has some minor changes. this dude reviews it kzbin.info/www/bejne/m6nPfoatfaehaa8&ab_channel=SimRacingCorner

[@mircrefrigerazionemorganra6599]

Hello it would be possible to have one, possibly with the jak compatible with the fanatec csl base ... thank you

[@Pinki-g6n]

hi my name is Dmitry would like to know the size of the metal profile

[@michel-jeanLozach]

Bonjour superbe réalisation merci pour cette vidéo. Je vais réaliser le même projet, des conseils ? Possibilité d'avoir le code complet merci d'avance pour votre retour Sportivement

[@socks2441]

watching this, i was like. yeah. cool. he did all the hard work thinking this up etc. but now ive seen it i could make that. i have some free time so i started properly thinking about it. and nah. damn yo. so many parts, and no matter how hard i try i cant think of a way to simplify it. if i was to make one i would have to source/ machine all those parts, do a bunch of measuring, lathe work. etc etc. so much effort and work. and i would have to buy some parts probably. i prefer to make stuff out of scraps. this is way out of my league. i dont think im up to the task. but i dont want to make anything less either. this looks so good with the mechanical feeling etc. also the way its built means it would last aeons. no wear and tear etc. its so good.

[@TheFlyingMechanic]

Nice shifter! Thanks dude.

[@smedley6444]

Hi, I have a sequential shifter, used for a few years wired in to my G27 panels, now up graded to Fanatec, so need to use with USB, can you assisted with more detailed wiring & programming video?

[@juanromancalderinsanchez6885]

Hola donde van conectados los cable a la nano micro solo seve conectado un interruptor

[@justinwellbelove1029]

Where did you get the spring what strength etc please also what size is the rose joint please

[@velocimech273]

Its m10 rode end. www.ebay.com/itm/PHS10L-10mm-Rose-Joint-Female-Rod-End-Bearing-M10-Left-Hand-RVH-/273757677255?hash=item3fbd3aa6c7

[@goifollow4028]

You connect switch at arduino pro micro at black wire GNO and red wire at 2.. another switch where you connect bro? Please share to me bro

[@velocimech273]

Other switch red wire to 3rd digital pin in arduino and black wire to ground.

[@goifollow4028]

Thanks bro..

[@vcpromuda4737]

good jobb bro im amaze.. and i have Same question bro about wire. 2 wire black to ground. 1 wire red to 2 and 1 wire red to 3.., like that bro?

[@stormer_3.069]

can you provide the docs to build it, like sizes and everything

[@MrMorro4567]

Hei! Where did you find this spring? i'm getting mad to find one! and what measure it has?

[@velocimech273]

You can find this kind of springs from old brake master cylinder from a car

[@franzdegraaf7600]

Hey mate epic build , any way you could supply me with the product numbers for the micro switch an the board cheers

[@joshualambert783]

Sir can it take reverse

[@NICOLASFBS]

Hello Possible to have the plans to reproduce your model ? I find it great. Thanks

[@velocimech273]

Hi mate. Not planned yet. may be near future.

[@lanuovaterra]

do the plans, I would be a buyer

[@mihaleban1323]

@@velocimech273 when ? I need it

[@carlosbacasoto102]

Awesome!. How much force do you need to do a change?. Maybe 2kg?

[@velocimech273]

Yea. Its around 2kg

[@carlosbacasoto102]

@@velocimech273 Thanks.

[@muchthump]

who came here expecting a link to a kit of some sort? Is this guy making kits with the parts that need welding and lathe time? Along with a parts list for the rest? Would be the most economical.

[@r3yze__26]

could you tell me the bolt sizes of the screws thanks

[@heka5402]

how thick is the metal plate you are using for the frame

[@velocimech273]

2mm mild steel

[@agusground]

make paddle shifter please + elektronik wiring ? greeting from indonesia

[@Bonkikavo]

You have only one switch diagram.

[@MrRevspeed]

Bro can't used?? this function at real car.. And gear display, help me can't used

[@jaroslavtomes1795]

Hey how its work with forza? I have wheel And gamepad And they dont work together

[@velocimech273]

Try this; forzatools.weebly.com/forza-emuwheel.html

[@ludvik_s_vonka2220]

Whats the name for the electroic you used in the handbreak?

[@velocimech273]

All the informations are in following link; kzbin.info/www/bejne/eZKycpScd5triac

[@FBI43]

A Genius.

[@paytufo]

Impressive!! Do you have any plans and BOM? Is amazing!!

[@j.l.h.kennepohl2691]

I want them 2

[@jChinth]

NIcely built.. !!!

[@velocimech273]

Thank you...😊😊

[@willentinejerry3209]

where can i find the source code?

[@zx-xv3uj]

Muy bueno un gran trabajo

[@mdagames8494]

Hi project cars 2 doesn't recognize my control. Could help me ?

[@velocimech273]

Hi, What are the controllers?

[@mdagames8494]

@@velocimech273 I'm using a arduino micro with the joystick library. For now im testing it without any another control connected

[@dariomessina6799]

Si possono avere le misure esatte per favore

[@mohamedmahdi643]

bro can you drop the arduino code please ?

[@renzogabrielmoreno1965]

Hello, Could you give me the arduino code that I use greetings great project !!

[@vuprovuong3226]

why is there only one the switch is connected to the circuit and where is the other? look forward to a response!

[@sergeguschin3245]

i don't understand how the switch is activated both ways, looking at the video the switch is either off (neutral) or on (when you pull forward), but how does it register a shift when you pull back?

[@ertpecsertpecs]

There's two switches, one per side. One side does the front of the traavel or upshift and the switch on the other side does the back of the travel or downshift

[@bertugcay]

man please help me i made a shifter myself but cannot assign shifter to forza it works on other games tho pls help

[@velocimech273]

Try this ; forzatools.weebly.com/forza-emuwheel.html

[@GianGoGame]

Where is the code?

[@odilonlarpiste8201]

Does it work on xbox ?

[@anxete1335]

does it work on ps4?

[@vuprovuong3226]

name game?

[@knpork4792]

If you are having trouble getting it to compile or getting errors use this joystick library github.com/MHeironimus/ArduinoJoystickLibrary/tree/version-1.0 its version 1.0 instead of 2.0

[@akmalmarzuki8660]

Can u help me. With the code??

[@TheSneezyPRO]

Hello.can you explain how you did it? Thanks

[@velocimech273]

Hi. I did a research about available shifters in the market. But they are much expensive. So i decided to build a one.Vesaro have one of shifter simillar to this.

[@ArjunKumar-oo9ik]

What is that frame made of?

[@velocimech273]

it's steel.

[@ArjunKumar-oo9ik]

@@velocimech273 Thickness of steel? size of bolt (used with spring)? size of bolt (used with as pivot) size or spec of spring?

[@jeffreytackett3922]

All I need is a vehicle manufacturing plant, and I can make a DIY racecar, then I won't need to simulate racing.

[@r3yze__26]

It works on ps4?

[@Rruify]

厲害"

[@heliomenezes10]

Cod arduino?

[@uzinst5965]

please, give the link of arduiono code

[@velocimech273]

Hi, Copy the following code to Arduino empty file. #include void setup() { pinMode(2, INPUT_PULLUP); pinMode(3, INPUT_PULLUP); Joystick.begin(); } const int pinToButtonMap = 2; int lastButtonState[4] = {0,0}; void loop() { for (int index = 0; index < 2; index++) { int currentButtonState = !digitalRead(index + pinToButtonMap); if (currentButtonState != lastButtonState[index]) {Joystick.setButton(index, currentButtonState); lastButtonState[index] = currentButtonState;} } delay(50); }

[@billellameri]

what's the point of sharing a DIY video for the shifter without sharing the files ??

[@noroardanto]

Halo apakah bisa dipesan?

[@MadRS]

Nice job but not exactly an easy or even realistic DIY. Not many people have access to a lathe.

[@rueuflecomte2539]

Слишком сложно...

[@scavangerll]

Ju