Make Unique Takedown Bow with Twin Limb from leafsrping, powerful survival bow from steel no forging

[@wollisiegel3598]

Hallo Sir. Would you build me such a bow? I love Bow shooting. I have 3 longbow an I think it is very interested to shoot such a bow. I can sent money or work machines. Greatings from Germany. Wolfgang

[@backyard.craftsman]

Thanks brother, welcome to my channel. I am sorry that I made it only as a hobby not intended to sale. I rarely have time to do it.

[@craigengle2234]

This guy said it already. That was my first thought from the beginning. Awesome design and making it take down is great. But the take down design is to make it more portable. And if you would take the first suggestion, it would help in this aspect also.

[@asankanovarabiya112]

@@backyard.craftsman и

[@alekx58]

and If Someone make 1000 beneidenswerte Idee zu beurkunden

[@adingautamaputrasutanto3460]

lo

[@DinoPimp]

Cutting out the centre in order to lower limb mass and increase limb speed is a great idea.

[@desert2223]

You are an artist!

[@QUYNGUYEN-mv4si]

Xem anh làm vừa thích vừa vui vừa tự hào vì nước mình đâu đâu cũng có những người khéo léo đam mê và đầy sáng tạo.

[@Вл.МАЯКОВСКИЙ]

ЗОЛОТЫЕ РУКИ! SKILLFUL FINGERS! 熟练的手指！NHỮNG NGÓN TAY ĐẠO ĐỨC!👍👍👍👍👍

[@jimmybutler1379]

WHAT POUNDS PULL AND STRENGTH OF THE BOW TAKE DOWN AND GOOD SHOOTING DISTANCE ? LOVE BOW SHOOTING FOR HUNTING AND FISHING !...

[@МуратБатуев-б9в]

Я знаю как в СССР делали но ты́ молодец 👍👍я с на́льчика

[@ernestoramoscruz73]

Amazing talent you have 🏆🏆🏆

[@michiganengineer8621]

A few modifications that I would consider for this bow. After wrapping the twine and gluing it, I would be very tempted to wrap a thin layer of fiberglass cloth around those areas for just that little bit of added strength. For the leather wrap on the grip, I think I would have used a strip of wet rawhide pulled snug (but not TIGHT!), as it dries the rawhide will contract around the grip for a strong and tight fit. I doubt if I would have carved out quite so much from the center of the limbs. Yes the bow would be heavier, but it would also have a higher draw weight. My preference for a recurve is about 55 - 60 lbs. Beautiful work!

[@dennyerickson6578]

I can't even shoot lower weights , been shooting heavy so long lower weights hurt when I shoot them , my Daily shooter is 110# but 3 days a week shooting 140#-180# Longbows and Recurves , My most Efficient and Comfortable is 125# Hill Wesley Special

[@michiganengineer8621]

@@dennyerickson6578 Nice! 20+ years ago I was regularly shooting 100lbs or a bit more. (sigh) Once I got deskbound at work not so much.

[@Turist54-i7o]

Отличная работа👍

[@murilo4844]

Parabéns pela perfeição do seu serviço, ficou lindo.👏👏👏🇧🇷

[@sebastiaoferreiraramos1053]

Have you ever tried to craft a 200 pound compound longbow or would that be pretty insane to think?

[@backyard.craftsman]

@@sebastiaoferreiraramos1053 I’m ok with 80lbs but 200lbs is too heavy for my joints 😎

[@sebastiaoferreiraramos1053]

@@backyard.craftsman faith in the father that the enemy falls and most importantly it doesn't have to be you pulling the 200lb bow I would just like to see it being built it would be very epic even if it wasn't used

[@backyard.craftsman]

@@sebastiaoferreiraramos1053 you might want to check out this video. kzbin.info/www/bejne/moesg3qBhMhrr6s

[@arturasstatkus8613]

Master's work♦️♦️♦️♦️♦️

[@backyard.craftsman]

Thanks so much

[@FunZone-se4ty]

Different ,beautiful,creativity

[@backyard.craftsman]

Thanks a lot

[@philholman8520]

Terrific! Beautiful bow! A labour of love that will keep you safe! ☺️👍✌️🇬🇧

[@dunkanmccleud5613]

Bellísimo!!!!

[@backyard.craftsman]

Gracias

[@peterpauldonoghue7024]

@3:27 I can't believe you went to all that trouble to grind down the thickness Oh, and well done on the central handle 'steel box' section - you really are a master steel worker ( fabricator ) just imagine what you could fabricate with a break press and a milling machine ?? .. brilliant work and workmanship

[@backyard.craftsman]

thanks brother. have a great day :)

[@buddhoo3137]

Masterpiece 👍

[@backyard.craftsman]

Thanks brother

[@manolobaez807]

Buenísimo 👏👏 que distancia puede alcanzar la flecha?

[@kirillkostyunin9194]

Hello! As an Izhorian, I wildly appreciate your labour! It's amazing!

[@muggzzzzz]

У моего отца был коллега водитель, тоже ижорец по паспорту. Это большая редкость.

[@oldmountaindawg4593]

Can you put out your specs for building.? I like your work an want give it a try. Thanx.

[@alfredoboneto2159]

Exelent work

[@backyard.craftsman]

Thanks. Glad u like it 😊

[@nazariarchery]

Good 👍👍

[@backyard.craftsman]

Thanks I am glad you like it. 😃

Hi I really like the arms and grip. The fit is also very good. However, the design of the horns is not good. The string should be caught at the ends of the horns and not at the base. the efficiency would be better. look at a Mongolian or Hungarian bow, how the horns are made on the ends of the bows

[@oldmountaindawg4593]

Can you throw in your specs ?? I'd like to give this a try. Thanx much. Love your builds brother. Keep doing it.

[@fabriceboel57]

Il est beau, joli mélange

[@stuartbirchall3971]

That is really neat man.

[@PaulXerxen]

Amazing bow, but I would have used something like epoxy resin and laminated the leaf springs on using fibreglass instead of all the C.A glue.

[@backyard.craftsman]

Thanks for the tips!

[@larrysullivan6536]

That is absolutely brilliant well done I’ve got to make one of these it is truly amazing thanks Larrysullivan in London

[@backyard.craftsman]

Thanks 😊 much appreciated 😊

[@muhammedeminylmaz4304]

Hello, before thinning leafsprings, how many millimeters thick does it become? How many millimeters does it decrease to?

[@backyard.craftsman]

the width is 2,4 cm. You might want to make it thicker for more heavy weight.

[@muhammedeminylmaz4304]

@@backyard.craftsman bro Can you tell me the thickness, thinness and length of the limbs?

[@backyard.craftsman]

@@muhammedeminylmaz4304 it's 4mm thick after grinding

[@muhammedeminylmaz4304]

Dude, on average, how many minutes did you take to sand the steel?

[@СергейКондратьевсынземлирусско]

Такие вещи делали в СССР только намного мощнее и стрелы были полностью стальные, назывался самострел на лося, работа супер

[@TedTinker]

I have to say I questioned the glue-up as well, but with the lashing and rest it came together great. Looks great, and smooth. Is it quite heavy?

[@Bruno.Bastos]

“Tem que fazer. Se der errado, a expectativa do acerto já fez a adrenalina movimentar.”

[@vitaliiperfiliev7202]

Классно, супер!

[@hoovyonlifesupport1129]

Dude i am absolutely in love with the hollow bow arms. It looks so sleek and yet its so simple. It makes me wonder though. Wouldnt getting rid of the steel on the arms make the draw lighter and the arms strength weaken?

[@ГеоргийНикульшин-з9ч]

OH MY GOD! Where are the directors of the company "HOYT" looking? This is exactly what they need!!! (Sarcasm)

[@fespatipurwakarta4987]

Wow.. Great

[@polgartibor1958]

super video !!!!!

[@николайниколаев-б9ц]

Отличный лук! -Молодец!

[@santosquliyev1507]

Я думаю, он сделал это хорошо. 😊👍🏻

[@ЗуфарГайнутдинов-ы8ь]

а размеры....хотя бы длина ширина толщина

[@matthewyu3531]

It's a very nice bow! Could you kindly tell me the arrow speed (arrow weight/draw length)? Thank you very much!

[@raypearson4475]

#40 at 28in watch the whole vid bro

[@imambpp2122]

Hi bro....what is the thickness of the leaf spring after it is made into an arrow ?

[@backyard.craftsman]

The bow limbs are 4mm thick. I might want to make it thicker for heavier draw weight.

[@hokehinson5987]

Great skills with hand cut off. Wonderful design...what the pound and draw length? Oh yes see now it is 40# 28" draw.

[@4everyoung936]

how cool😉

[@jairohuffherter5706]

Parabens pelo serviço

[@ravshanr4264]

Всё классно, хорошо было бы если тетиву повыше зацепить, намного мощнее было бы

[@AngelSpinelli-lc3ym]

muybuen trabajo ,que mucica es esa??

[@asty2323]

how did you keep thats elasticity by cooling in that way?

[@michiganengineer8621]

That is just to keep the steel of the leaf spring from overheating and losing it's temper (the springiness).

[@میثمکریمی-س3ن]

سلام ببخشید برا نقشه واندازه این کمان میشه هزینه کرد ازتون گرفت ممنون میشم جواب بدید

[@ethanw8205]

What kind of FPS are you getting?

[@arifismayilov7826]

U did a lot of job there, but how long can this bow shoot? Have U tested it?

[@sinisasirar1972]

Nije loše za metalni luk.👍

[@fkccp]

这个好拆装方便了

[@Logan-yr3qc]

Que buen arco me gustó me quiero hacer uno

[@DogsaladSalad]

it looks cool to have big siyahs but your losing speed, limb tips need to be as light as possible

[@TopikCn]

Mr can you make a turkish bow with old steel to 😊👍🏻

[@backyard.craftsman]

Thanks brother, Turkish bow is one of my favorite. One day I ll build one.

[@Goold-jj1nd]

Былобы лучше еслиб тетиву фиксировал на самом кончике плеч... а так неэфективная работа плеч... но идея хорошая.

[@backyard.craftsman]

Thank brother for the advice. it's much applicated.

[@Goold-jj1nd]

@@backyard.craftsman переведи на русский

[@AngelSpinelli-lc3ym]

buenicimo ,que mucica pucieron

[@mikeparsons491]

👍👍👍👍👍👍👍

[@OsculumEstMorte]

Good

[@piesligeros6640]

👏👏👏👍🏼✊🏼

[@wagiyo2819]

👍👍♥️

[@adrianoliveranski8969]

Uns 20cm maior ficaria perfeito, mas um belo arco parabéns!!

[@pradeepkumarmohanty6851]

Please make one. Willing to pay.

[@theodart2199]

Super, gratulacje!!

[@marciodiasdasilva7810]

Quanto custa um desse

[@backyard.craftsman]

Thanks brother I am glad you like it. I am sorry that I dont' have time to make more of it.

[@wendellbailey6394]

Any drawings or pattern numbers advance.

[@backyard.craftsman]

Sorry brother it's not available

[@halvavich9282]

отлично но не проще сделать из сырой стали потом закалить

[@primarykemastersahab]

This bow is heavier than bamboo bow and horn bow.

[@backyard.craftsman]

Just a bit heavier as the steel is not very thick

[@garethbaus5471]

Yes. By the way you should probably also know that rain is wet.

[@marcialavinaavalos9013]

Quedó bien hE si dispara a we ur distancia llega

[@jacobmadden110]

This is beautiful. Shut up and take my money.

[@robertpiwko7375]

A co to za luk powinien być odwrotne naciągnięty

[@franciscoedmar1051]

🇧🇷🙏👍🙏👍👏🏹🎯🏹👊👊👏 show my friends 🤗🤗👍👍

[@ashadizanur4907]

Two words. Bad Ass. I meant it in a good way.

[@backyard.craftsman]

I am sorry I made it only as a hobby not intended for sale.

[@harishkevat2701]

muje lgta ye joint bow h isliye iski lachak ke kaaran door se speed kam h isliye pass se dikhaya h

[@backyard.craftsman]

thank brother for your comment and sharing your oppionion

[@IDIY95]

Cung tên có thể tháo rời cơ à

[@backyard.craftsman]

Yes, it's a takedown bow. but the arrow is not.

[@chandmeitei2250]

Can I buy one?

[@eternoakashadecimus6818]

And you don't sell them. I'm interested in that 40 lb detachable bow ? put a price on that bow friend how much and don't go out that you can't were you from friends ? me mexico

[@lokmandemir831]

Yay Kaç libre oldu

[@dannydowlen4490]

All I got to ask is how much

[@jerrieyum]

I want one!👍🏾🤩🫡

[@kristopherlenning2636]

Can you please make the bow of odysseus please

[@backyard.craftsman]

I would love to when I have time 😊 thanks for suggesting

[@おとはまちゃん]

The target is too close; the actual prey is further away

[@fabysantesteban1097]

Hola necesito ese arco para cazar jabalíes salvajes en Uruguay te agradecería que me lo envíes pronto saludos

[@FranciscoMartinez-jg4md]

Lamentablemente tanto trabajo por nada ,al cortar la ballesta con la amoladora se destemplo el acero con ese detalle yo ya no usaría ese arco ,se te puede reventar en la cara en cualquier momento

[@backyard.craftsman]

thanks for the comment

[@corneliushoward7371]

Brother, just like the first Samaria Sword with the artist name in it. Your design could make one very wealthy. IT might be just a hobby to you with no time in life to focus your mind. The are other people or companies that will take your Idea to Innovation to a level whereby you and them can be in your own magazines. Put all the length and measurements together with pictures is all you got to do. And get yourself together so you can tell all how you got started in making the Atomic Bow!

[@NO-lt4jc]

好箭法

[@picatchouartbraille3379]

Bravo. OK pour les 40lbs à 28 livres, Mais quel est le poids de l'arc. ? Merci pour vos expérimentations. Patrick Dupré Montpellier/France. Actuellement je me fabrique des arcs Turcs pour ma fille et me 3 petits enfants. Des arcs de 7/_/ 9 et 10 Lbs, mais de 1m de long pour tir à cheval. Je viens de trouver à 4 km de chez mois du bois d'Osage des oranges. Fantastique . Bonne continuation.

[@Maddi0494]

Hello, I would be grateful if you could make one for me

[@backyard.craftsman]

Thanks brother for liking it. I wish I had time to make more of it.

[@matthewyu3531]

Speed ? Without fps, it's meaningless.

[@JoseA-Divergent]

Tien como mucho 30LB Conozco los arcos....

[@johnlshilling1446]

Yeah... Looks awfully weak. It would be ideal for Video Games where the in-game physics are programmable.

[@kylebennett7518]

Very nice. Take my Sub/Like.

[@backyard.craftsman]

Thanks for the sub!

[@mnuch5325]

Mohon ditayangkan alamat tempat pembuatannya berikut No. WA yg mudah dihubungi, terima kasih

[@VivekKumarshrot]

Hello Bhai aap se baat karna hi

[@opieshomeshop]

Angle grinder safety nonexistent.

[@HACPATb2PA3A]

Сделано конечно хорошо, но, слабоват,

[@ЗуфарГайнутдинов-ы8ь]

ни размеров тебе нифига.... хотя бы в двух словах....

[@germansahidbeltranardila2985]

Huuuuuyyyyyyyyyyyyiiii la verraquera

[@ВасилійМаховський]

😆😆🤣

[@dennyerickson6578]

If you could make that over 100# @27 " I will pay whatever you need

[@ovejanegra9698]

Bueno, bonito y barato pero sera efectivo a 50 metros ? Lo minimo que deberia haber probado es a 35 metros al aire libre, claro a 6 metros es re facil y se ve potente, pero lo que importa es la utilidad de alcance y trayectoria.

[@adrianoliveranski8969]

Pensei a mesma coisa. Creio que uns 20cm maior o arco ficaria bom. E o teste deveria ser de no mínimo uns 30 a 40 metros. Se é um arco pra caça nenhum animal permite se aproximar tanto, a não ser que esteja doente e não posso fugir.