Make your 3s Arrma Senton 4s Strong⚙️⚙️(Walkthrough)

Рет қаралды 7,933

Күн бұрын

Пікірлер: 40

@jeffreykee7923 8 ай бұрын

Already did the 'trick' on the motorhousing. figured it myself. saw others put grease there to stop dirt and since i didn't like grease everywhere i tried the tape. works great indeed💪🏻

@CrownKing-ds8cx 7 ай бұрын

Yes it works great… happy bashing buddy !!!

@SBUK2010 3 ай бұрын

Great content … All the best from the UK 🇬🇧

@Elite_Air_Gunner 11 ай бұрын

Definitely subscribing! Just ordered my Senton 4x4 BLX 3s today! I got the red ass well! Can't wait to rip this thing!

@CrownKing-ds8cx 11 ай бұрын

Yes that’s what I love to hear…I know you’ll enjoy it. If you have any questions feel free to reach out to me.

@Elite_Air_Gunner 11 ай бұрын

@@CrownKing-ds8cx thanks brotha will definitely do that! I appreciate it! Great video by the way! Looks like an awesome setup you've got!

@Boogie_the_cat 6 ай бұрын

Those steel diffs are a must have. My rear diff (stock) lasted 3 weeks. The front lasted 5. When i replaced the rear, i went and bought both sets because i knew I'd need them. Got me a HotRC receiver and transmitter, much better than stock SLT3. Those metal pivot balls are worth their weight in gold. Talking about buying a slider: some stock things you don't want anyway. Arrma servos are garbage in my experience. My Granite servo lasted a month. My Felony servo is crapping out after 4 packs and one little crash into a cement pillar 😮 But it's the motors that crap out, not the gears. The gears are metal, and don't strip in my experience (with a decent servo saver) but the motor will start to hiccup. You try and turn and it won't turn until you give it some acceleration, then it'll happen more and more until it stops turning. Nobody wants a stock Arrma servo. The $20 servo on Amazon (DSServo brand) is an improvement on the stock servo. Arrma 3s is a good platform though, and real easy to wrench on. Granite 3s was my first hobby grade, and now I actually like wrenching on it.

@Stevebolicas 7 күн бұрын

check out the 4s motor plate set up from outcast with center diff but now the typhon 223s has a center diff as well which i think fits better then 4s motor plate! I also see typhon arms and toe links gives a wider stance and more stability! About to do these on my granite mega i got for $150

@MrZachxd 4 ай бұрын

Absolutely fantastic video!! Thank you!

@MrZachxd 3 ай бұрын

Great video!! I did the zip tie mod also amd it helps so much!!

@rccarsandmusic2641 11 ай бұрын

Great video

@CrownKing-ds8cx 11 ай бұрын

Glad you enjoyed it. Thank you

@SpazzYettii 10 ай бұрын

Great job on the video, great information. I'm new to the hobby. Thanks!

@CrownKing-ds8cx 10 ай бұрын

Thank you I’m glad u enjoyed it. Please check the rest of the channel out im quite new to it too but It’s a great hobby to have. I’m sure you’ll enjoy it.

@rodneyhendrix93 4 ай бұрын

Put lock tight once you find right adjustment and let dry for 2, 3 hrs

@timcarter7051 8 ай бұрын

Nice truck , l like the way you trimmed the body and nice chassis brace! What if you cut out the louvers in the hood with an exacto knife would that help reduce body lift? I have the same truck , the rtr brushless 3s model. I am going to try one of those chassis bags because l am tired of getting the unwanted " rock collection " after every run. Thanks for all the tech tips !

@CrownKing-ds8cx 7 ай бұрын

Yes cutting out the Louvers is a great idea I’ll try that… be careful with those chassis bags as they hold the heat in. Scorched RC makes a shied liner I would like to try and maybe you could look into that instead👍 happy bashing..

@CrownKing-ds8cx 7 ай бұрын

And thank you I really appreciate it.

@miltbuiltrcMBRC 9 ай бұрын

I like what I see I got mine on 6.

@CrownKing-ds8cx 9 ай бұрын

More power is always better 😂👍👍

@AVERAGEJOERC 11 ай бұрын

I think the arrma diff set up is stronger because the hole through the middle of the output makes a weak point and also the pins break on traxxas

@CrownKing-ds8cx 11 ай бұрын

I agree. The load is not depending on the pin like traxxas.

@imridingwithstoopidohwaiti3948 4 ай бұрын

Isnt that truck actually a Mega 550? I thought the 3s ones had adjustable links.. got a roller that was a Mega converted to 4x4. I threw a 3s redcat motor in it and took a couple teeth off the plastic ring gear first run.. so I upgraded to locked metal slipper full metal cased metal geared diffs and now snapped a motor shaft in the fist 5 min of running it.. It clearly needs a 4s or a 4s that's capable of 6s