Make YOUR

[@patmcgowan5327]

After watching a few of these videos I have to wonder; why didn't they just build the tanks so they fit the trucks? Here's our tank kit. It doesn't fit but you can alter your truck enough to make it work.

[@lightninsadventures2692]

It's because these are blazer gas tanks that just sort of work in the pickups. There are a couple of companies that sell custom fitted tanks that don't hang down near as low and don't require cutting the bed(except for where you decide to place the fill hole)

[@azastro919]

The only thing I would change is that brass float they always fill with gas. I've had to replace it 3 times in the last 2 years, I finally found a life cell float on summit thats solid all the way through.

[@jimmysapien9961]

Thanks for that information

[@santanaman6783]

And breather filter to above the tank too

[@byronperry6014]

Misc. things like lines? That is a bit of an understatement.

[@tbear802]

What size fuel line did you use and where did you get the caps to block off vent and return lines and what vent breather did you use Also what size fuel neck hose and gas cap yours is the only video I’ve seen installing the fuel line and breather I have a 1965 C10 so don’t think I need the return line and one vent line

[@CJClassicTrucks]

I bought the caps at a local parts store, they usually come with a couple different sizes & are pretty cheap. As far as the breather goes, we have those in stock on our website. As far as the fuel neck goes there’s another video on our channel showing you what hose & gas cap i use. Everything that I used for that is on our website as well too!

[@gunsandhorsepower]

Never had a ploblem with my 72 factory incab tank

[@dannylinc6247]

Yep, 52 years and no broadside collision here, either. No smell of fuel, and 72 has heat expansion tube. But gas cap- locking is only offered in plastic, now.

[@byronperry6014]

True, but there is a better way to do it, and I don't like sitting infront of a bomb. I have a question for you. Why did you watch and comment on this video, if you have no interest in making the conversion?

[@JWROC83]

Can you not run flex pipe or whatever and use existing fuel area in cab. I would like to keep that look and have it functional not just for looks?

[@CJClassicTrucks]

I don't think that would work out well, after you relocate the tank its pretty far back so you'd have to run a super long flex pipe into the cab and also cut another hole in the cab to be able to route it back in the factory spot.

[@kenlelon369]

Go Ahead!

[@joeclark9042]

Oh yeah and I forgot what year did that sending unit come out of does it have any special ohms

[@arowe2140]

What did you use for the filler hose and where did you put the door?

[@CJClassicTrucks]

we have a part 2 to this video on our channel showing that process!

[@jasonnellis3566]

Do you make tank for 2014-2018 fuel tank 26.0 gallons. I want to put in the rear of truck. Thnx

[@jimmysapien9961]

Is this only for carbureted or injection carburetor combo

[@CJClassicTrucks]

nope you can use this gas tank for any platform

[@rrrobin2569]

I just bought one of these. Where did you put your return fuel line? Did you use the vent tube next to the sending unit?

[@CJClassicTrucks]

Our truck has a carburetor so we didn't have to put in a return line

[@rrrobin2569]

@CJ Classic Trucks Oh okay, I am running a 5.3L LS swap. I believe I should be able to use the vent tube next to the sending unit.

[@ernestobermea4562]

Hey bro, Where can I get a new tank installation kit like this online??

[@CJClassicTrucks]

We always put the part link in our description But here's a direct link to the gas tank! 😎 www.cjponyparts.com/fuel-tank-conversion-kit-truck-frame-rail-mount-chevrolet-c10-gmc-truck/p/FTK10/

[@joeclark9042]

Hey bud I got a couple questions for you how many gallons is that gas tank what year is it and will that fit a 1988 GMC 2500

[@Sryofcrv1]

17 gallons and no, its for 63-72

[@____MC____]

that bubble wrap under the carpet is gunna go flat where the floor mats are. Ive tried using a peice for a shoe insert at work and didnt last a few hrs.

[@Sryofcrv1]

Will this tank work if I wanna put a walbro 465 or something bigger in it for a turbo build?

[@garthcarnell5420]

What tank supplier did you use?

[@PeterHatch-mx7zc]

Do you have part numbers please

[@CJClassicTrucks]

there's a link for the kit in our video description.

[@PeterHatch-mx7zc]

Can't find it can you give them part number thks

[@CJClassicTrucks]

www.cjponyparts.com/fuel-tank-conversion-kit-truck-frame-rail-mount-chevrolet-c10-gmc-truck/p/FTK10/ part number FTK10@@PeterHatch-mx7zc

[@matth5162]

Go watch brothers truck video on their tank it helps with the tank install alittle more

[@pjnelson8971]

Yeah... let's go ahead and stop saying 'go ahead'.

[@demarques1911]

😂😂😂

[@dannylinc6247]

Fill er neck😂

[@ryanfox7529]

Good Job! I can't cut my frame . Goes against my religion. Also the tank looks to low in my opinion.

[@CJClassicTrucks]

I was worried about it sitting low too. Our truck is lowered a good bit and it's actually not to bad, we have some pretty bad roads around here and I have no issues with it.

[@stephenmalone2314]

Your right the tank sits way to low !

[@raygottschall9101]

Plasma cutter works much better

[@robertemmons2260]

For a professional company, I'm not impressed. Im not seeing any professional results on this tank install. Here is why I had said this. For the fuel line, i will not use a rubber fuel line for long runs. Rubber fuel lines shouldn't be longer than six inches max for joints. Avoid using zip ties to secure your fuel line. They can become brittle over time. Use conduit or tubing clips instead to secure your hardlines. At the fuel inlet, instead of cutting into the franerail, just simply heat and bend, or pound the frame lip down. It's better to have displaced metal for strength than it is to have metal removed. If at all possible, run your sending unit wire (and fuel pump wiring if using an electric fuel pump) inside the factory or new wire loom. Other than that, this is a good fuel tank conversion. I have this conversion for my '68 C10 using this same tank from your company.