Known about tucking to shrink for a long time and seen other demonstrations, but yours is the first one that made clear how to capture the tuck. The light finally came on for me. Can't wait to try it again. Thanks for your clear and patient videos.
@MakeItKustom3 жыл бұрын
So h go lad to hear this man!! It’s awesome to know that it made sense!
@locker603 жыл бұрын
Great Karl, I will knock one of them up tomorrow , Greetings from Bonnie Scotland
@mickmarrett92843 жыл бұрын
I do exactly what you do every day for a living. Yet I still find you inspirational. I think it is because I am 100% self taught So it is good to see some one else doing what I do so I know I am not doing it wrong 😁
@MakeItKustom3 жыл бұрын
Hahaha right on well I’m glad you do it the same way so I’m not wrong too 😂
@fishhuntadventure3 жыл бұрын
Self taught. I don’t do this for a living but my skills seem fairly good to me. But watching other people do this with skill far exceeding mine isn’t inspirational to me- it makes me think how much better I could be if I’d had instruction like this when I was young! Basic stuff that took me years to get somewhat competent would have been so much better if I’d spent those years refining my skills instead of figuring it out! I only amaze the unskilled…
@AttitudeAdjuster3 жыл бұрын
@@MakeItKustom Any professional Tradie knows the way they were taught gets it done, they also know there are other ways, But the Real Boss is the one that can make mistakes and knows how to get it back. That is the difference in a world of armchair critics that never created anything in their lives, But watching cool talented Tradies with high standards always shines through it all. Awesome Video and delivery, Content and Talent, and no time wasted apologizing to critics, Steel for me is such a fascinating subject having come through from Carpentry and timber that once cut wrong is always wrong where Steel in a masters hands like yours is such an artistic medium that is restricted only by your imagination and to watch groups that work together feeding each other is just pure pleasure because No one is actually wrong and the different ways to get to anyone point just is amazing to watch. I would love to see where damage is in a flat section of the sheet and you can take it out after it's been stretched and it can be done where access is difficult to the other side of the work surface or will you always need to dolly or support the other work surface in light gauge?
@stich19603 жыл бұрын
Loving the basic style tutorials lately
@delas73893 жыл бұрын
Thank you for not blasting us with the DA and grinder noises… makes for a great video.. keep up the good work.
@0lddragracer4263 жыл бұрын
A nice little tool to have in the shop. Thanks Karl.
@koolkar553 жыл бұрын
As always Karl you are the best teacher & thanks so much for sharing your skill not only on metal shaping but making inexpensive tools to make it happen. You never cease to amaze me with your knowledge & passion for your chosen career. Thanks. Billy J...... Queensland, Australia.
@MakeItKustom3 жыл бұрын
Thanks a lot Billy! Cheers 👊
@AbstractDreamz3 жыл бұрын
Good to see you settled in Sir!
@jamesmcnamara74843 жыл бұрын
Thank you for making this so attainable for the average knuckle head.
@johnmcclain38872 жыл бұрын
I like to read the comments as well as watch the video, responses are also enlightening, I'm just watching and learning, and so many comments pursue avenues I don't even know exist, until I follow them. It's a pleasure to watch a craftsman pursue a steady line from beginning, flat, to a compound complex curve that matches what was established first. Thanks for sharing your skills.
@frankeck54933 жыл бұрын
Watching this, it's why you do what you do, and why I don't do what you do. I have a hard time even picturing how you figure it out. But I love watching it.
@KingatowCrew3 жыл бұрын
just starting with metal shaping and I am very thankful for your videos to get me started in the right direction
@rancepledger24083 жыл бұрын
Very nice shop you have! You and your wife make the best videos showing " how to" to everyone, keep it going.
@guillaumehumblet92973 жыл бұрын
Still want big machines but that is super cool ! Thank you
@ricklaporte99303 жыл бұрын
CONGRATULATIONS on the new shop. As always great video keep up the good work.
@HomeMadeBoards3 жыл бұрын
Watching this in hospital after back surgery. Thank you for muting the die grinder, so annoying to pulse width modulate my sound every time I see a tool about to be used. So many people don't edit their video properly. Thanks mate love every single one 👍
@haroldneely92533 жыл бұрын
I’m not only blown away with Karl’s skill but also the amount of people with interest in hands on metal working.👍
@Laugh1ngboy3 жыл бұрын
100 dollars for a bumper on my old Ford. 3,000 for the plastic to cover the bumper on a 2014 Nissan. I am half a mind to get a Ron Covel book and start making the cover out of sheet metal.
@jayinmi37063 жыл бұрын
It's like ASMR for car guys. lol
@rockypergin22163 жыл бұрын
Congratulations on your new place!
@SpeedlineFilmWerks3 жыл бұрын
The build short is one of our fav edits too! The last short of the series that's about to drop is a must watch though!! Check out METAL REBORN and the inside the mind of KARL on our page and stayed tuned for more 🔥🔥 content!!
@MakeItKustom3 жыл бұрын
Hell ya boys! Can’t wait!!!
@deankay44343 жыл бұрын
So technically if the steel is 18 gauge, shrinking it pushes the area you want to move smaller, the metal gets thicker, say 17.5 gauge or thicker depending on how much you move it. I have watched a motorcycle builder, Eric Gorges, shrink metal this way, teaching a blacksmith who admitted she had always used heat. One thing he said about working with metal, is to move or place your equipment higher or lower to fit the worker. If it is not comfortable you may hurry up and not produce a good job. Your vise, wood stump, sandbag, air hammer, etc. He made a point of having a hook spot in each location to hang ear protection, gloves at each work station. You don’t waist time looking for them nor make noise without having them because you’re in a hurry! Makes sense to me. Thanks for sharing this simple tool. It is useful and priced right! I enjoyed.
@larss3373 жыл бұрын
You're a true metal working artist. 👍
@stoveboltlvr37983 жыл бұрын
Very cool idea. It reminds me of a pipe crimper for round duct as far as principal. Glad you are settled in to your new shop.
@phantom6293 жыл бұрын
As i was watching i was thinking about the malco crimper i have but i dont think it would work on 18 gauge
@BeachsideHank3 жыл бұрын
When I needed one, for the first time in 40 years, I taped two parallel wires to the lower jaw of vice grips and one centered on the upper jaw, worked perfect for a one- off need, and now I can die because I won't need to again.☺
@stoveboltlvr37983 жыл бұрын
@@phantom629 I always had 2 sets of Malco crimps my newer set for regular duct work and a beater set for heavier gauge. They will crimp 18 but it just takes longer between hand cramps.🙂
@maikonrios24393 жыл бұрын
I really like your videos and your Master teachings. hug here from Brazil
@MakeItKustom3 жыл бұрын
Thanks man 👊
@humptydumpty38023 жыл бұрын
Glad to see ya in the new place, thanks for showing that technique!
@johndowns82432 жыл бұрын
You’re absolutely right about most people working with aluminum when they are showing their work. I appreciate the fact that you did that in 16 gauge steel.
@CarterAutoRestyling3 жыл бұрын
Excellent video. I love seeing what can be accomplished with basic tools. I always hear people say "I could do nice work too if I had a shop full of fancy tools", but the reality is that the pro metalshapers all had to start with the basics, because without an understanding of how metal works all those tools are useless. Thanks for proving that us regular backyard builders can create complex parts too and bonus points for taking the hard road and using 18g steel for the demonstration!
@Kymbo10003 жыл бұрын
In Australia we have this thing called Bush Turning, you would put that round bar in a drill or drill press and spin it while using a grinder/sander to taper it. Much easier
@dietmarfink82333 жыл бұрын
🤣 i was thinking the same thing. As long as it fits in the chuck of your cordless, i use this method quit often. Btw, i love those Aussie slang words…
@jonnyrox1163 жыл бұрын
I think Karl's point is to show that anyone can do it without all the tools. I would just chuck it in the lathe, but I admire how he makes a point to show that anyone can do it.
@dietmarfink82333 жыл бұрын
@@jonnyrox116 that’s true. I do have a lathe also, but as you said, Karl is showing the way, to build stuff without expensive equipment, which many guys in garage shops don‘t have. I kind of decide what tools i use, depending of the level of the workpiece i build. Instead of setting up the milling machine for a slot in a basic piece of flat stock, that becomes a temporarly spacer, i just use the drill press and an angle grinder, to safe on time…😂 Great channel though, and he is a really nice guy sharing his great knowledge
@MakeItKustom3 жыл бұрын
Hahah bush turning! Yea I prob could have assumed most people have a drill
@techronmattic58763 жыл бұрын
Always more than one way to skin a cat, I have a forge so I would just taper with a hammer, forging a taper would be the fastest way If you have the skills & equipment
@jamieweirdworld3 жыл бұрын
I'm older, and have been fabricating, and tinkering with my old junk cars for 40 years, but I'm really learning a helluva lot from your videos. I really appreciate that. Never too old to learn.
@donaldcochrane32833 жыл бұрын
Same hear. Its cool how he is showing how. The new bees how to. But new this 30 years ago. Inter net makes it like it a new thing
@lazyhoundracing96213 жыл бұрын
It's great that you work with steel. It seems most metal working videos work with aluminum and my 53 Chevy pickup is steel. Thank you for your time.
@tomasthillman80223 жыл бұрын
Thank you Karl.👍🥰
@josecondemarin95863 жыл бұрын
Great teaching video Karl you have so much talent the sky is the limit !! keep going you are doing great. Great video take care Thanks 😊
@praetorious3 жыл бұрын
These are some of the best most accessible videos I've seen. you and Trev's blog make me feel dangerous enough to get work done.
@MakeItKustom3 жыл бұрын
Haha thanks man !
@donx033 жыл бұрын
Yeah. Watching and learning. Thanks for being a good teacher.
@Manandmachine7723 жыл бұрын
Great DIY tool idea video, love these kind of videos. Thanks Karl
@danielrunge72943 жыл бұрын
Thanks Karl. I actually don't have one if those but gonna make one now! 👍
@kenhomeier86293 жыл бұрын
I love that so many of Karl’s videos show how to do it with simple homemade tools that anyone can make instead of expensive machines the average guy doesn’t have.
@MakeItKustom3 жыл бұрын
Thanks Ken! I realize now that I could have started much sooner because I too used to think it wasn’t possible without unattainable knowledge and expensive tools
@anthonysinclair57213 жыл бұрын
I guess I'll have to up my game from a rock and a stump! lol 😁
@bruceperron37963 жыл бұрын
As always,fine craftsmanship.
@aggie91kuenemann763 жыл бұрын
Congratulation on the new shop. I’m I bit older, but relatively new to metal shaping. I enjoy your videos and your projects are very cool.
@GeordietheJoiner3 жыл бұрын
Cool video man thanks for showing us hand tool techniques… not everyone needs or can afford the machines so great to see the old school ways 👍👍
@JasonTheMunicipalMechanic3 жыл бұрын
I’ve seen this technique once before. The other video I saw the guy used needle nose vise grips and clamped on both sides of the tuck to keep it from sliding out. You have great videos. Very professional and thought out.
@MakeItKustom3 жыл бұрын
Yes you can hold the edges to help the shrink more ! We should go into that on the next one
@Richardskull3 жыл бұрын
That could make a cool bottle cap for a wall hanger. Little paint ,pinstripes . Giant japhands brew ha-ha.bottlecap sign! Excellent video as usual.
@leonhart24523 жыл бұрын
I like watching these videos. I am at an age where learning to do metal shaping is not gonna happen. Watching videos that show the work and time that gets invested in doing such things teaches me to respect those who do this work. Doing it with such passion and passing this passion on to others is something very few can do. Thank you for what you do.
@MakeItKustom3 жыл бұрын
You’re so welcome man I’m glad you are enjoying the content!
@nazjamal42312 жыл бұрын
Thank you Karl..watching you is truely inspirational.👌🏼
@kellysebastian28893 жыл бұрын
I like stump shrinking but I’ll definitely take some time and make a tucking fork. Thanks so much.
@aaronyoung80283 жыл бұрын
Hey Karl, loving your "BFH" Solves 97% of problems... 🤣 Cheers Aaron 🍻
@tintat23 жыл бұрын
my dad always called it a "multi-angle swing press" :)
@MakeItKustom3 жыл бұрын
😂😂😂
@DesertRatFabrication3 жыл бұрын
Thank you for taking the time to show us how to make a simple tool, awesome
@ea61412 жыл бұрын
I've been using a bowled stump to create tucks but I think I'll make one of these as it seems easier. Thanks for taking the time to pit this video together 💪👍
@roberthowland45033 жыл бұрын
Another great idea I really like you are showing it's fun to watch. Thanks
@erlingbrakefield16613 жыл бұрын
I just started following your channel and find your skills and talent amazing. I especially like the fact you are Canadian, we need more of your ideas and especially on budgeting. Your message goes across much more than just the business you are in, I am a certified organic farmer and apply your practices in the upkeep of machinery involved in the everyday operation of our farm. Keep up the good work, I am spreading your message!
@MakeItKustom3 жыл бұрын
That’s so awesome to hear! And thank you for spreading the word across other industries! Cheers
@georgeyoung6133 жыл бұрын
Congratulations on the new facilities. Much luck on growing your business and your brand of custom.
@georgeezzell44743 жыл бұрын
I definitely need this tool this tool. Thanks.
@pappabob293 жыл бұрын
Thank you very much for showing us that!! Watching you put those kinks into the end of that disc, I was immediately reminded of the "Crimper" that is used on the ends of sheet metal ducts to shrink them so they will engage into the end of the next section. Made my first successful little "patch panel" this weekend using some of the knowledge and confidence I gained through watching your videos. A little patch with a couple of little "bead" dimples on the inner side of a 57 Chevy rocker panel. Mostly welded in and not all ground yet. It will be in my next video. Thank you very much!!! 👍👍⚙️🛠🗜🔩
@MakeItKustom3 жыл бұрын
Awesome man stoked to hear it!! It’s crazy how much shape one can get with a few tucks
@scootergem3 жыл бұрын
I know that time is money, so I am very grateful to you for demonstrating this for us. Kudos
@fredgillick30713 жыл бұрын
Hey Karl, You make things look easy. Your also, going to make one hell of a teacher. You make it interesting, and explain everything where a young teenager can understand. Thank you from an old man. If I were 35 years younger, I would sign up for your class. Thanks again and I love your videos.
@MakeItKustom3 жыл бұрын
Your so welcome man 👊 thanks for watching!
@karlscribner74363 жыл бұрын
True, Karl goes against the old saying “Those that can, do. Those that can’t, teach.” Excellent teacher of great projects.
@stevesloan6775 Жыл бұрын
I seriously hope KZbin is paying you good money, as you have so so so much amazing content. You give me confidence in what I’m creating. Thank you for that!!🇦🇺🤜🏼🤛🏼🍀😎
@gordonhenagar66523 жыл бұрын
great demo you make it look easy
@tonynicoletti21653 жыл бұрын
It's such a pleasure to watch your videos ! Your videos let people with not very much metal knowledge understand that you can do a lot with just simple tools and your hands . It seems to me people want a machine to do everything for them anymore, you show that you don't have to own a lot to be able to do a lot .I needed some simple machine shop work done , a shaft turned down and a key way cut into it. The shop was like I have to have a cad drawing to do that. The true craftsmen are a dyeing bread . It 's great to still see people like you .Keep making the videos they are very enjoying.
@MakeItKustom3 жыл бұрын
Thanks tony ! A jetway is the first thing I ever did on a milling machine!
@rowycoracing3 жыл бұрын
Definitely going to make one of those. Thanks!
@rockfpv60013 жыл бұрын
An adjustable wrench works well in a pinch also. 🔧🤘🤘
@papawheelie58353 жыл бұрын
Tucking fork admittedly sounds a little like something a dyslexic would say at the drag races. Great video, Karl!
@shredct31183 жыл бұрын
Hell yeah, that new electric Mustang has some tucking fork man!!😂😂
@ericdolan21303 жыл бұрын
I was thinking exactly the same thing.....
@tobygathergood49903 жыл бұрын
Once again Karl, an awesome video on a tool and technique that is clearly and concisely explained and demonstrated.
@leroyroberts13973 жыл бұрын
I always look forward to your videos. Keep up the good work.
@stevencoons4503 жыл бұрын
Great explanation. I especially like the comparison between aluminum and steel.
@mikepelelo56573 жыл бұрын
Good practical information. Thanks!
@Ricopolico3 жыл бұрын
Thanks for making removing the mystery. You're a damn cool guy.
@Spycontroll3 жыл бұрын
Today we got again a perfect lesson! Thank You! :-)
@MakeItKustom3 жыл бұрын
Your welcome!
@daviddelosier19153 жыл бұрын
Karl and Christina, awesome videos. I've been working on cars, trucks and heavy equipment since I was a kid. You are very talented. I enjoy learning from your videos. You're never too old to learn a little trick of the trade that will save you money and time. At my age time is important. I like the new shop. I'm looking forward to seeing more videos. Thanks for the education.
@MakeItKustom3 жыл бұрын
Thanks David! Cheers !
@flatbeavergarage76923 жыл бұрын
thanks Karl...guess I know what I'll be making today down here at the Flat Beaver Garage in Flathead Montana....thanks again
@thomasaschenberg98093 жыл бұрын
I love your show. So informative. Keep them coming.
@chriskappes91703 жыл бұрын
I do not do this for a living its a hobby for but i see a need for this so ill be making one very soon i want to thank you for videos very helpful fo guys and women like me who like to do their own work shop looks great hoping to build one maybe by this summer keep up the great videos we people need them thanks again
@theissofkaltenbrun90433 жыл бұрын
Your the man bro so humble and also so willing to share your knowledge
@harrycatrell14713 жыл бұрын
Thank you for sharing, Karl! The tool is cool, but the new shop is incredible! Congratulations to you guys, for sure! I, personally, believe that the actual number of hobbyist applying what you are teaching us far exceeds your estimations! 'Looking forward to the next lesson! Enjoy your week! Be safe!
@MakeItKustom3 жыл бұрын
Thanks a lot Harry! I hope so 👊
@martinsteele32593 жыл бұрын
I have no reason to make a dish like that but I am going to make that tool and make one. Awesome stuff!
@MakeItKustom3 жыл бұрын
Wicked man ! 👊👊👊
@martinsteele32593 жыл бұрын
@@MakeItKustom I am watching this again, and I have a part that I am trying to make that needs to be shrunk. I do have a shrinker/stretcher from Princess Auto but it really does not shrink much at all. With this fork that you made, would that be used more for a larger item? Now if the item you need to shrink was smaller, would you make the forks not as long or a smaller diameter for the rod?
@kellbray42363 жыл бұрын
Hi. I'm an older plumber and find your channel fascinating Please keep up your sessions. I'm close to retirement and will probably make some efforts to get into metal as a hobby. Well enough said. Thanks again for sharing your trade in a way visual people can understand 👍
@zachlenning26533 жыл бұрын
Keep up the great content. You are a natural teacher.
@wrongwaygarage3 жыл бұрын
From the moment I found your channel I knew you were an incredible teacher of the craft of metal work. When your intro started focusing on the CNC, I was slightly disappointed because I knew that your skills and equipment had advanced (financially) beyond my realm of possibilities. Let’s be honest, not many people have the really expensive tools ( at least, I don’t). It would be very difficult for me to learn metal working if the tools that my teachers used were not at my disposal. I can not express enough how happy I am to see you show the “everyday guy” how to build a tool that can help him shape metal using “everyday tools”! Don’t get me wrong, I still wanna see the incredible creations you can build with the “big boy” tools. But for me, I wanna learn. When you stop learning, you start falling behind. So you keep expanding your knowledge and ability, and more importantly, keep sharing it. If you’ll keep teaching, I’ll keep learning. Thank you so much for this video. 👍🏻
@MakeItKustom3 жыл бұрын
You’re so welcome man and thanks for watching and taking the time for this feedback. It means a lot cheers 👊
@nathanhawkins41083 жыл бұрын
I’ve been studying the stuff for years and I always wondered how to make that tool and use it very helpful thank you.
@richardarthur81913 жыл бұрын
Amazing never knew how to do what you do. Thanks for explaining and showing how to make a dome and for shrinking metal.
@mr.p50443 жыл бұрын
Karl, I have to give you a 10 + out of 10. Your Series.really explain exactly HOW metal shaping is created. All your different lessons are a positive to anyone who choses the challenge of fabricating their own parts. The main ingredient is a passion and a vision to create your own build project - car- truck - whatever you dream of building. Karl, you motivate people to "create"! I enjoy watching your videos. Congrats on the new shop, lots of room to build!!! You can never have enough space. I teach Collision and Refinishing Classes in So Cal. I suggest to my students to review and study your videos to help them to more understand how sheet metal works. Much Respect for You. Mr.P
@MakeItKustom3 жыл бұрын
Well thank you very much man I really appreciate your feedback and I am honoured that you pass this on to your students! Maybe if I am in SoCal in the future we can link up
@ronbelldvm3 жыл бұрын
That's a neat little tool, and great tips on how to make one. Thanks!!
@MIKEH.7773 жыл бұрын
You just made a great tool, keep up the great work and God Bless you and your family.
@mickeycox6690 Жыл бұрын
Stick it in a Drill and Spin it, lot easier and consistent. Love your Work.
@unknowndestinyfabrication38723 жыл бұрын
Congrats on the new shop. Can’t wait to see what you do in it.
@pauljeglum97863 жыл бұрын
Karl, thank you for being an insperation to the 'everyman, backyard builder' as well as the seasoned guys. I especially liked the videos on both the door panels and the circle blank punch as well as all your other tutorials. Congrats on your new place and I'll be following you in the future. Thanks
@MakeItKustom3 жыл бұрын
Thanks very much Paul 👊 so glad you are into the videos!
@jerrybigrig94753 жыл бұрын
Thanks for editing out the machine noise ..👍😉👍
@ronlynch77443 жыл бұрын
Another useful tool that’s cheap to build, good one. 😎👍🇨🇦
@sashakokesch41373 жыл бұрын
Excellent content guys. Thankyou.
@jackiedonaldson77183 жыл бұрын
Great tip Carl!
@watersmart13 жыл бұрын
Karl is the man. 👍 great video!
@bryanevans25003 жыл бұрын
Thanks for the video, looks like alot of hammering 🔨. Building up the arms.
@levirocks1234567893 жыл бұрын
I'm so happy I found this channel its nice to learn another skill everytime i watching one of your videos , keep up the great work
@anthonygillesse72422 жыл бұрын
Your skills never cease to amaze me🇨🇦
@rogermontee82643 жыл бұрын
Very nice video Karl and the tucking fork is a cheap tool to build and use.Thanks for sharing.☺️☺️☺️👍👍👍👍
@michaelanderson37712 жыл бұрын
Once again some great advice Karl. As per the comments from others, you explain these techniques very clearly. Great to share your knowledge and easy to make hand tools. Thanks so much for sharing the craft.
@gasjockey1013 жыл бұрын
I've also make a tucking fork out of two center punches works like a charm
@MakeItKustom3 жыл бұрын
Never thought of that! Harde metal too!
@gasjockey1013 жыл бұрын
@@MakeItKustom yea man can't take all the credit check out outlaw edge on KZbin that's where I got the idea from
@johncrable33493 жыл бұрын
I don't do this work but really found it interesting. I would have given it two thumbs 👍. Thanks again and have a happy day 🙂
@MakeItKustom3 жыл бұрын
Thanks so much! Cheers
@danawick98173 жыл бұрын
nice to see you with new Gloves :) looks like the start of a custom hub cap
@IronHorseGarage3 жыл бұрын
This is tucking awesome!!! Great tucking work!! I'm going to build one of these tucking things!! I really enjoy all the tucking information you provide!!! It's great that you really give a tuck about showing these tucking techniques!!!
@MakeItKustom3 жыл бұрын
Dude was laughing so hard thanks a tuck load
@IronHorseGarage3 жыл бұрын
@@MakeItKustom Hahaha!! N problem!!
@kcraigcustom99803 жыл бұрын
Thanks for going into detail and showing how home gamers can do this stuff. Used to work at a race shop and had any tool at my disposal but no longer at that shop. Trying to accumulate tools on my own. You had me stoked to buy my first horizontal band saw off market place for 100 bucks! It’s on the smaller side but does what I need it to.
@MakeItKustom3 жыл бұрын
Awesome man one tool at a time. You will get there. It’s actually crazy how cheap all my tools were because I waited to not just a deal But a crazy deal and was ready to jump on it or drive right away
@jeremym67933 жыл бұрын
Thanks for showing how to do this I needed a rounded piece like that recently ended up cutting some corners out of an old roof I had ill try this technique next time