CAMERA LENS Made from Sand and Rocks

[@sprichard304]

As I watched this last episode I realized I have something that would help you with the glass cooling. I bought a lot from a precision glass manufacturer auction a few weeks ago. It included what was labeled as a cooling table. It’s basically a heated table so you don’t get the quick thermal shock and you could slowly cool the glass. It’s yours if you want it.

[@TheTenthBlueJay]

Shawn Prichard a comment will do nothing Email or tweet him

[@TheGreenerItGets]

That sounds awesome! Definately email him.

[@hiimwaynko-4987]

Shawn Prichard email them. They’ll most likely shout you out.

[@russelltalker]

or he could just cool it down in the kiln like he was supposed to and eventually did. Every thing he did was rushed and that why he had so much failure.

[@jas1154]

Try discord

[@stephenthompson3309]

Just thinking about ages upon ages of human life, labor, training, and gathering wasted materials that have been spared by factories and the ability to mass-produce quality materials... man, what a time to be alive. This series always makes me so grateful.

[@highlander723]

UH UH NO CHEATING! YOU HAVE TO BUILD THAT 3D PRINTER FROM SCRATCH!

[@talhatariqyuluqatdis]

XD

[@zer0b0t]

...and a metal CNC machine.

[@rin_2a]

XD lol

[@JackOLanternBob]

and no using a 3D printer to make the 3D printer

[@michelleross9782]

epic

[@ColinCKOV]

Try to take a colour photograph using red blue and green filters.

[@Top-Code]

And he could use special mirrors to reflect RGB each to different films then stain the films then combine them

[@octaviusgalacticus2253]

@@Top-Code that's awesome

[@ZPain42]

compared to your earlier glass making attempts you literally sound like a professional now haha

[@ossiehalvorson7702]

I'm just discovering him and started way back, working my way forward. It's amazing what you can accomplish with some persistence and humility. I doubt he ever would've made it this far if he didn't defer to those who can provide an expert opinion. Too often people get the idea in their head that they have to figure everything out themselves, despite it having been discovered by countless different people over countless years, and eventually give up when they get stuck.

[@Nighthawkinlight]

Impressive on many levels!

[@VLTNO]

same

[@jackkook7349]

I think this is by FAR the most amazing project you've taken on. Thank you.

[@susanelliott4211]

This makes me admire the person who first invented this

[@paulunglaub8427]

really?

[@peixearrombado]

Next episode: making a spacecraft from scratch and fly to the sun to harvest its energy

[@mirainokiokuha]

Elon Musk aproves

[@noel9817]

And become the person who help humanity advanced to the type 2 civilization

[@thegreatpugtato]

Maybe in about 25 videos, he's getting there

[@jayphoenixcos3136]

@@mirainokiokuha i was going to make an Elon musk joke dang it Ya beat me to it

[@MrN1c3Guy100]

One bucket of sun please

[@TonyAndChelsea]

Andy, you're my hero. I've wanted to try this forever, but I'm not half the man you are.

[@BucharestBytes]

Gosh even the Northrups

[@mr.octopie6199]

Can you please try to make chewing gum from scratch.

[@TheOfficialCzex]

That's a great suggestion!

[@andersjjensen]

The ancient Romans new how, so it shouldn't be a totally weird process.

[@eidolor]

Ancient Rome also had concrete, metals, cloth and pedophelia so

[@micahphilson]

Chewing Gum is actually a really great idea! I hope they notice this!

[@andersjjensen]

@@eidolor Neither of which require overly complicated processes.... so your point is?

[@Kavriel]

On the one hand you have incredible commitment to what you're doing, and on the other, you're not accurate enough. Everything is eyeballed and just rough. Mesuring and planning go a long way, having the right tools also does. I understand you're working on a limited budget, but more conscientious efforts on every steps would have produced a better image.

[@georgebateman3876]

Very true. It would be reasonable to do videos where he makes some sufficiently accurate tools. An attempt at building a lathe would mean he didn't have to use CNC for everything accurate, for example.

[@guiguipop3658]

Do you réalise he made a camera from rock and yet u complain bout the image not being accurate enough

[@Kavriel]

@@guiguipop3658 I do. But kissing his ass isn't going to help him achieve better results. Constructive criticism might.

[@Artillect0]

@@georgebateman3876 He could build a Gingery Lathe, it's a bit of an undertaking but I think it'd also help him learn how to cast and process metal better.

[@vsams14]

Seconded. I feel like every video comes down to "oh I did this thing but.... then I dropped it" or "but.... then I made some mistake that could have easily been avoided if I just did some more research and took my time"

[@channelitusdeletus8586]

*Drops lens...*

[@reyariass]

Reminds me of the time he fell in the water, I laughed waaay to hard and kept repeating it heh

[@channelitusdeletus8586]

@@reyariass yeah same.

[@noirnit.]

You pour the metals and glass too fast... it traps air bubbles inside making imperfections

[@chickenstripper7755]

Mr. Bacon it was more likely that the plaster wasn’t 100% cured and some moisture was left behind which evaporated causing air bubbles

[@alockworkorange7296]

@@chickenstripper7755 for some reason im pretty sure u he used regular paster and not investment plaster cause of the way it kept breaking with the heat

[@asuka-ryo]

How many kilns has Andy went through at this point? 😂

[@Lillly353]

Bought ones? At least 4 possibly even 5 or 6

[@TheProrage509]

5-6 he broke one then had to use some thermal whool then got a new one

[@theblackbaron4119]

@@Lillly353 yeah probably adds up. I think the most ones went out of commission when he tried to produce obsidian/ an obsidian blade.

[@y.m.o.fh.s.c8580]

Wow sounds like a real Pane

[@crashgaming8289]

Ha ha ha what a clever pun. I get it. He made a glass lens.

[@kenstanley6267]

The channel should be called “How to make everything, so long as you can travel the US and have access to professional tools like 3D printers, CNC machines, and facilities that manufacturer tools on special order”. Sarcasm aside, I couldn’t be more disappointed in this video and this channel. You’ve become so obsessed being perfect that you’ve sold your channel’s soul to industrial methods. Boo on you.

[@TheOfficialCzex]

I would say the answer is "Prussian Blue", but Prussia is not the name of a German city; rather, it was the name for a particularly prominent _state_ of Germany up until 1947.

[@sciblastofficial9833]

TheOfficialCzex Prussia is not a city, but Konigsberg (now Kaliningrad) was a famous capital

[@brodykaiser9829]

That is a valid answer. Preußisch Oldendorf is a city in Germany. Preußisch translates to "prussian".

[@Bananakid11]

on german it's called "berliner blau" --> berlin blue so maybe thats why they called it the city?

[@mitchahbw]

Hot to make everything (using a 3D printer and a CnC machine

[@geo5378]

Mitchell Bradley-Williams and other tools with help

[@paulunglaub8427]

Seeing him using a CNC was kind of relieving because if you aren't careful you create scrap metal. But he wouldn't care and use it anyway

[@starshot5172]

Andy is the best tryhard in the world

[@robotslug]

The fact he shamelessly shows us his myriad failures is what makes this relatable and entertaining IMO. We end up rooting for him by the end. THAT SAID, this video had too much cheating for my taste.

[@facepalm7606]

People are hating on Andy for using a 3D printer and CNC machine. *They should just get their own channel, and make the 3D Printer and CNC machine themselves then*

[@skwerrul6516]

You, good sir, are without question one of the coolest people on earth.

[@fss1704]

Indispensable Staatc nahh, you didn't know me yet

[@skwerrul6516]

fss1704 wanna bet?

[@s4098429]

Andy seems like the kind of person that when opening a bag of chips would spill them all over the floor. Not a natural creative type. Major credit to him for persistence.

[@Slikx666]

Andy. One day you'll be able to make some glass and form it into the shape you want, it may take years but you can do it. You're like the people who set world speed records, years of hard work mixed with many failures but they end up doing it. You and your team are great, keep on going.

[@minister6667]

Every time I watch one of your videos I really hope you have a kiln sponsor. You go through them like butter! :D :D

[@alejandro54683]

The glass breaks out and generates bubbles inside because it cools too quickly, make sure to put it in a insolating chamber to get away from the cold plus I advise you to cover the furnace crucible with fluidizers plus use pulverized crystal to accelerate melting... the final polishing must to be done with diamond paste

[@filmweaver2013]

Amazing! I am speechless. Really makes you admire the knowledge we as humans acquired over centuries! I think this can actually be a series where you first build the tools (basic stuff that can center your parts, jigs, fixtures etc.,) slowly building upto making a lens. That in and of itself is amazing. If I may, my humble suggestion is to just slow down the pace, we love the process, and we would even appreciate if the project isn’t complete and you are stuck at lens making. Anyways, wonderful video!

[@austingx8295]

the little cnc machine protrusion, my 12 year old sense of humor: “Tiddy.”

[@ryanmckay6471]

Even if you fail a thousand times, the work you do is so amazing and inspirational. So no matter what you win. You have a new sub thats for sure! Glad I stumbled across your channel.

[@techrev9999]

This series is awesome. I wish the general workmanship was better, but the concepts and process is amazing. I love this.

[@SiriusBlackBuscus]

As an undergrad mech engineering student I absolutely adore this channel. It’s kind of what my dream occupation would be.

[@andrewl1971]

I feel like using the 3D printer breaks the whole idea of making things “the old way” Before you built your own tools

[@Qwerty-zj3rk]

Oh yeah, HTME and cameras. Two things I love dearly put in one video!

[@DutchPhlogiston]

You seem to be rushing through this one for some reason. There are so many things that would have been nice to show in more detail. The lenses are nice, but you don't even stop and take a moment to admire the final ground lenses. Even that one of the broke one is only mentioned briefly at the end.

[@ianmacfarlane1241]

"Rushing" - he said that it took him five months, and he's still not happy with the end result.

[@brettfafata3017]

@@ianmacfarlane1241 By "rushing" he means the pace of the video.

[@ianmacfarlane1241]

@@brettfafata3017 It was 22 minutes long, and would have been horrible to edit. 30 minutes might have been better, but Andy uploads regularly, and the scheduling is up to him. I can understand that people might want to see a bit more of the process, but it's a creative decision to show the failures, so I don't know what the solution is.

[@DutchPhlogiston]

​@@ianmacfarlane1241 I mean the video, not the work (well, perhaps the CNC). To me, it seems as though he feels dissapointed about the final result and just wants to get it over with.

[@pazuzutru-truluv7094]

Thank you. This is just the right combination of subject matter and presentation to provide excellent content.

[@Wolfytototito]

Something you need to make and will make your work easier is a lathe.

[@kutz0420]

Hey man. You need to try using graphite for any glass molds. Molten glass will not stick to it. Most of your failures seemed to be from thermal shock but you cold get a much smoother starting point by using graphite on the pieces that did make it through.

[@gabrielcain8975]

And the cool thing about using graphite for this is that it's a directly mineable resource -- there are graphite mines in the united states. This would fulfill a lot of the spirit of this channel through that use, too. Googling "graphite mine usgs" turns up a lot of interesting information on the topic.

[@NKG416]

man your glass addiction is concerning, but seeing you success makes me happy!

[@johnfarley7074]

I’m impressed. Kind of miss the episodes without all the machines but still impressed

[@fairyflosslord7]

i absolutely love this series its really cool to see how hard it would have been for people to make stuff

[@rory5167]

The glow up between the first glass attempts to now is so satisfying to me! I actually feel really proud 😂😂😂

[@MrAndrzejWu]

letting glass cool slowly helps it not to crack, letting it cool down on a metal which is a heat sink is not the best thing to do

[@bswtsp21]

Yeah, but also, thats what he poors it onto to get it flat. Give him suggestions then.

[@abdulnafeh3684]

He preheats the metal

[@roguepathfinder2477]

Abdul Nafeh that’s why the glass is red/yellow hot yet the metal is (comparatively) only warm.

[@abdulnafeh3684]

@@roguepathfinder2477 If he makes it red hot, chances are that it will bond to it or something

[@ssss-df5qz]

@@bswtsp21 the "suggestion" would be to float it on tin to make panes or anneal it properly.

[@nataliekate2176]

Every episode I watch of this I’m blown away. The sheer patience!! 👌🏼

[@quinnls]

You should put a modern lens mount on this, I’d love to see how this looks on a better sensor!

[@LeLightofHell]

I want to see through the lens not through the glassplane :(

[@eemanbintesaqib3148]

A huge round of applause for your efforts!! I really appreciate your hard work and dedication, continue making awesome content!!

[@saladlegs4755]

Finally not a fortnite video in my recommended

[@bsapavel6880]

AAAAAPEEEEX!

[@lazyrazorr1180]

KZbin will tell you the truh, i've got the yugoslavian war music and some videos about history of 20 century in my recommended.

[@diveinstructordaniel1095]

You just need to block it so they wont come again

[@iWolfei]

@@lazyrazorr1180 are you a history teacher or something lol

[@Macc985]

this is the first video in my recommended thats not a meme

[@AtomikSoup]

Berlin blue is a lovely colour, a.k.a. Prussian blue. Congratulations on an impressive result for your camera!

[@Leoraptor21]

Your videos are awesome and I only found your channel today!

[@bandit-1881]

Me tooo

[@leofochler7083]

The answer to your question is Berlin Blue. Most of the comments said Prussian Blue but I'm from Germany so I know that Prussia is no city but a region. I really like your videos its just something I've never seen before on KZbin but thats really amazing. Thank you for your cool videos!

[@thetruthexperiment]

I'm glad you're doing this. years ago I wanted to write a book like this, and I'm glad I don't have to.

[@SteveCalamia]

& you still can! There's so much everything everywhere that no one could make every how to make everything guide about everything.

[@mrmurphy172]

I'm 46 years old. I remember watching film in school with similar image quality. Great job. Really impressive and cool.

[@noel9817]

Next episode: how to make a solar cells (solar panels) :P

[@John-lx8iu]

Interestingly, solar cells and LEDs are essentially identical but slight differences make each good at either emitting or receiving light and poor but capable of the opposite (the light generated by a solar cell when powered is not visible by our eyes but can be measured/viewed through special lenses)... Point being, yes HTME should definitely cover Solar Cells but at the same time, Light Emitting Diodes (LEDs).

[@demetriusthompson2362]

@@John-lx8iu I see someone watches Steve Mould

[@hiimwaynko-4987]

John so it’s a reverse flashlight

[@karyjas1]

this should be possible

[@fss1704]

forget about that, i have a prototype ready of something that WILL put solar cells to dust.

[@ArtifexBarbarus]

Very impressive. I collect old cameras because I'm fascinated by the engineering artistry represented in an exquisitely crafted hunk of brass and glass. Thanks for deepening my appreciation by sharing your journey to recreate some of that in your garage :-)

[@Br0teas]

How to make everything? step 1: buy a 3d printer step 2: rent a C&C machine and that result.... This is a great example of being a jack of all trades but master of none.

[@jujubaloolian]

Jack of all trades, master if none, still better than master of one.

[@wastedtalent1625]

It seems he hasn't learned anything from all his failures. It is getting old watching him make the same mistakes over and over again

[@jaketerry5879]

True but you forget we all start from zero. He might be a jack of all trades but a master of none but whos to say he doesnt work hard at several and become a master of some

[@BuddyLow88]

Im so happy i found this channel im so amazed how awesome it is!!!

[@TromboneMasta98]

Too bad he's not very careful with anything

[@aaroninman7370]

Yeah it pretty infuriating watching him screw up so many times, but at least he keeps going.

[@blubberboy1897]

Yeah he gets impatient to quick. Kinda frustrating lol.

[@brytekru7946]

Seriously!!! That was honestly the most upsetting part of this video. You would think after spending sooooo much time getting to this point he would absolutely paranoid about breaking stuff. It's still awesome that he is learning how to do this stuff but he really needs to work on his steadiness and maybe put down some foam pads on the floor wherever he works lol. He seems to cause alot of setbacks because of being clumsy that end up making these projects take wayyyyyy more time than they should. Also haste is waste which he hasn't quite figured out after all these years. Trying to save time has caused him to waste it way more often than not.

[@nekononiaow]

Yes, this is absolutely infuriating. He seems to have no patience at all and jumps immediately to the next step before having made sure that the previous one was properly finished. If only he could work on his patience, so many of these failed steps would be avoided. This is really a waste of energy and time. Great videos and ideas but for the love of everything that is cute and fun please work on your patience!

[@cruiserflyer]

I think the things I admire the most about this channel is how he shows his errors, shows how hard it is to make these things given that he is a layman. While we all wish the results were a little better, I am sure he does too, my hat is off to him for his determination and perseverance.

[@channelitusdeletus8586]

wow I didn't know he had 1mil until he uploaded that video. This guy deserves more than a mil go hit that sub button.

[@MarksmanGuitar]

I loved your video , you worked really hard and probably learned more then you could show . Back in my college days i had some photography course , and on semester we did mechanical photography , like you did in the last part of your video . The things i remember is that we used a black-light to expose the ink , and the negative where made with acetate paper , and simply used a photocopier the print them . Good luck ! and thanks again for sharing the whole process .

[@JESTAz]

Is there anything you wont try to make? Great job Andy you are an inspiration.

[@dogerswag]

1:10 Did you just say "alone"? From what I saw from your series so far you have been getting a lot of help from other people.

[@MathieuStern]

Great job, but can you make one wiht an Iceberg ?

[@GarettHarnish]

I have to admit that I'm rather jealous of the photos you got before it melted. It was a unique looking lens.

[@htme]

The idea of using ice actually came up, and lead to me finding your video on making one from an iceberg. Great video!

[@MathieuStern]

​@@htme​ that's very ironic because when I was thinking of making an Ice lens, I was scared that you would do it before I had to finish the project, love your channel since the start and maybe one day we can do a video together :)

[@WilliamAmyot]

You're doing important work, keep it up. Thank you for documenting your journey for us.

[@abyssmanur3965]

Conclusion...Galileo must've had help from alien technologies.

[@davidmartineztorres8731]

"History" channel be like

[@ssss-df5qz]

Conclusion: Galileo took his time.

[@peterfireflylund]

@@ssss-df5qz Galileo was competent.

[@ytrewq6789]

You have successfully done the most comprehensive demonstration I have ever seen on why camera lenses are soo expensive!... AWESOME JOB!!!

[@Ikimono]

While I'm happy you're progressing... Your whole channel is based off "Can I make this myself with materials I gathered, myself." I am seeing less and less of this every episode to the point now you're going to a milling facility to have a mold made, and using a 3D printer to make things for you...

[@L337f33t]

kinda feels like hes cheating a bit more and more

[@bigal2643]

this project was doomed from the beginning because of the glass.

[@Nightreavarr]

Yes it's kind of sad I completely agree with you

[@SiriusBlackBuscus]

I agree only to an extent, because he did attempt to make these completely from scratch and it would have worked, but to achieve a better, more entertaining result he milled something which would give him a fighting chance. Let’s cut him some slack, he literally spent 30 hours grinding the glass and extracted his own copper. Plus in order to continue to make content he needs to be able to make videos on a somewhat regular basis. In order to do so, sometimes he will have to use an alternative method.

[@bigal2643]

FaultyFemale I’m not saying he shouldn’t have completed the project or done what he needed to do to finish the series.. but I started watching this video series under the assumption that its possible for just about anybody to do what he did and make he made. Access to the tools and materials needed to create a lot of the things in this series are mostly beyond anybody’s means to replicate his work.

[@NOWUNITEDUPDATES]

All of your videos are worth the wait. ❤️

[@sanad71]

everything would go much smother if you actually learn more about the basics of making, designing, pouring metal, and thinking outside the box. it sounds like a lot but not really, this is the content that you choose to make for KZbin so please learn more and give those skills more time.

[@gabrielcain8975]

+1 to this - I see you continue to have the same kinds of errors in your castings that seem to come from being in a hurry or incomplete burn out. I’m unclear whether this is to drive viewer attention or is from a lack of fundamentals. I like your videos and I mean this as constructive feedback.

[@leocurious9919]

This. He even tries a different methode after it didnt work perfect the first time...

[@Hydrastic-bz5qm]

The point of the series is to see if the average person can recreate the technology we have today, or get as close to as possible. He isn't going to go in with more training than the average person.

[@gabrielcain8975]

Sure, and the average person can learn the skills to be proficient in casting. I'm not saying that he should spend a ton of time learning it to perfection. I am saying that since so many of these things, these everythings that he's aiming to build will start with castings that putting in some time to work through the process will reap many benefits to efficiently executing this project.

[@swinfi2]

@@Hydrastic-bz5qm I feel sad that his view of "the average person" is utter ruthless incompetence. making the same mistakes, again and again. I'm surprised he's not maimed himself already... where's his caretaker? sorry HTME, I love the idea of your channel, but i can't bring myself to not get annoyed every time you rush/botch/fail every thing you do, every time i watch.

[@Migueldeservantes]

Casting metals, by it self is an art as well as a science, that w/o counting that glass have the inconvenient that one have to put it on an autoclave to keep the temp from falling to fast... I have done plenty of metal casting on my days and perhaps the most important aspect of it is the proper rigging, and to have enough planing.. I honestly couldn't understand how one will pour glass on a cold metal frame...but I guess that he managed to do in only 5 months what it'll probably take me a hole year or so!! great job and best wishes..

[@garthor]

watching all this C&Cing of metal makes me want you to go visit alec steel for a collab to make some damascus! XD

[@Tunkkis]

CNC, not C&C. CNC is an acronym for "Computer Numerical Control"

[@TheTouristGuide]

Hope you were happy with one of the recent vids!

[@punkpin]

I feel impressed that this channel made a point that still stands to this very day!

[@Rich_ard]

Please watch some of the metal castor's on KZbin that know what they're doing, this grant Thompson/ Cody's lab metal casting isn't working for you.

[@xboys_archive]

Richard Wheatley LMAO dude you clearly haven't been looking around this page He Literally Made A Video With Both Of them Where They Casted....

[@xboys_archive]

Mowafaq Feda ... I read it clearly don't see what's wrong.....

[@xboys_archive]

Mowafaq Feda but he's already met them?

[@Artillect0]

@@xboys_archive He met them and learned how to cast metal from them, and it isn't a good enough method for him to be using for detailed things like this

[@Venus_7319]

Rip grant

[@joebob998]

If you want better cast glass, make the programmes on your kiln slower! The plaster will be more likely to crack from thermal shock if it heats too quickly. Also, unless you want really bubbly glass, try to keep your chunks as large as possible. The smaller pieces trap more air, so getting the glass free of bubbles will take much much longer at melting temperatures to allow the bubbles to rise out.

[@wallabyparty5443]

Maybe you should heat the thing you pour your glass onto... it may help with the shattering.

[@Darksagan]

Its so cool that the community has joined in to assist. Amazing channel and project.

[@yourlocaldavid6656]

How to make a KZbin channel that doesn't slowly get un popular

[@tilengasparic6765]

impossible

[@Carmenifold]

i think that's a violation of third mode anemics

[@patprop74]

that is quite the undertaking, i congratulate you on your willingness attempt something like this, i am guessing you have a new found respect, for the modern manufacturing process.

[@Fred5612]

Primitive man about to invent the wheel: But first I needed some help from Martin with his CNC machine. Future scientist about to figure out interstellar travel: But first I needed some help from Martin with his CNC machine.

[@ThaFedejp]

So happy you could finally make this!

[@raphaelslittletalks]

I really Leica this video!

[@brandonscott2851]

As an amateur photographer i find this very fascinating to watch and can only imagine the steps it took to make the very first lens with alot cruder equipment than we have now

[@TheRojo387]

Fun fact: the camera is termed after its first ever iteration, the camera obscura, whose name meant "shadowy room" in Latin.

[@hasturbr]

Your next big project should be a lathe.

[@saltlauren9888]

Finally! A video of you actually making something. HTME is back!

[@ericbell7]

Next time, build a solar-laser:) Cheers

[@trszng]

Solar panels

[@yulsixa7343]

This channel is pure gold

[@RadagonTheRed]

I hope he built the cameras and computers from scratch that were used to film and edit these uploads.

[@legoalex87]

The answer is BRUNSWICK, nice job on your videos, keep em coming, they are very interesting, and I learn a lot of things that I otherwise would not.

[@obtainedpanda2763]

I feel like this is a TV show.

[@sumansaini8035]

This channel makes me appreciate machines. Humans really have come a long way

[@wastedtalent1625]

This cool and all, but you would think that Andy would have a better grasp of all of these skills by now. How many times have you worked at pouring metal? It seems to me that if you actually spent the time learning how to do things properly this show would be far more interestng. Cuz it so far it just is a show about you kinda making things, and not actually finishing anything

[@calebbrazeau4597]

cudos 2 you for not losing your enthusiasm. thanx a bunch 4 sharing.

[@rhyboy1]

so much effort into some parts, and so little into others.. it was kinda making me annoyed lol!

[@Arrowed_Sparrow]

It's crazy how truly difficult something is to make, even if it's shoved into even the cheapest of devices. Awesome video.

[@sirflimflam]

You have got to be the clumsiest guy! I swear, I've lost track of how many times you've dropped something off camera and killed tons of your effort.

[@Thorogrimm]

Your endurance towards failure is phenomenal

[@micahtritscher951]

8:35 **cough cough** cheat ** cough cough** 😂🤣

[@jayphoenixcos3136]

I just have to say, you are a massive inspiration to me as someone who makes a lot of things and doesnt know what they're doing most of the time. You just prove that anything can be achieved through lots of trial and error and to not give up even when it seems hopeless. I tend to give up on things if it doesnt go sdll the first couple times but sometimes it takes more than a couple attempts to get the results you want so keep it up 🙌🙌

[@reptilejesus829]

Getting the help of a highly specialized metal worker and his industrial tools isn't really the point of this show now is it? The final result isn't supposed to be perfect . I thought the whole idea was that you make everything yourself lol

[@reillywalker195]

I don't see how learning from an expert is contrary to doing things by oneself. Why not learn from others?

[@wyatt3896]

Be Gö shut your mouth you mediocre clarinet player

[@mi8628]

@@reptilejesus829 The clarinet thing is a reference to Spongebob.

[@octaviolee8282]

@@reillywalker195 Teaching someone something and helping someone is two different things, on the intro he clearly says if an average person could do this alone.

[@InvincibleArts]

Great level of patience he is having..🙏🙏

[@aaroninman7370]

Now I feel like I could make a crappy youtube video. I have a forge and some dirt.

[@rare9351]

i swear this guy deserves so many more subscribers