Project 0112 | Making a spindle sander

[@cartoon80s90s]

I have watched videos of woodworkers making spindle sanders, but if there was ever any doubt that your channel deserves its name, this video is the best answer. And the filming quality of the video is top-notch, as always.

[@BarneySaysHi]

I love the fact that you guys re-purpose old stuff and turn it into functional stuff. I mean, reusing old shockabsorbers never came to my mind for anything!

[@surajraopawar]

And old fire extinguisher

[@aserta]

Shocks are chuck full of parts (even the spent oil inside is useful as lubrication). To throw them in the bin is a really wasteful thing. Whenever i decommission a set i chuck them on the lathe, cut the welds and if the shocks aren't that rusty, i get a rod, a few small valve springs, high pressure seats (where the seal goes), the tube itself, the large spring, seal seats from the neck, which you can weld unto other projects, a Y joint. Like i said, why would one throw that out when it's a DIY guy's treasure trove is beyond me, the rod alone, is probably 50 dollars worth of high quality steel that can be used on lathe projects, even if it's pitted or rusted, it's still high quality steel.

[@voidmansions]

Not to mention the treadmill motor too

[@Hellsong89]

As mentioned high quality steel with corrosion resistant finish. I'm building DIY lathe using one as the axle.. just need lathe to make treads to connect to chuck i found for free including just right fitting cone bearings and pipe that if slightly sanded pressure fits the bearings. Dunno who, but someone spent pretty penny on those and trowed them into metal bin, from witch i saved them. Soon i'l be able to make some round parts, just need to start looking heavy I beam as frame for the lathe.

[@PALM311]

This project deserves a... "SANDING" Ovation! But seriously ,you guys are at the top of fabricators on KZbin. I really enjoy your videos. In fact they give me motivation to get out in my own shop and to build cool stuff!

[@Artwareh]

Απίστευτες ικανότητες έχετε και οι 2. Και στις κατασκευές και στις λήψεις -μοντάζ. Συγχαρητήρια!

[@laurakampf]

Wow! So well done!!!

[@MakeitExtreme]

Thank you Laura!

[@jyrikosonen566]

What force moves it up and down back and forth?

[@pretenda]

@@jyrikosonen566 did you watch the video? It's a wiper motor

[@TrevorDennis100]

@@jyrikosonen566 I'm pretty sure that it's The Force, so unless you have Jedi powers it stays where it is.

[@jakodzun]

У чуваков с этого канала настолько прямые руки, что прямо завидно! Реальные профи.

[@andreasadamou1403]

Outstanding work guys as always 🤘🏼

[@jeffbenz7575]

Work's quality always at a very high level , always enjoy your videos !

[@pappaflammyboi5799]

If DIY ever described anything, it would be this channel. Best quality DIY equipment by DIY'ers I've ever seen.

[@MakeitExtreme]

What's up guys! If you interesting to get the plans for our projects it's available on patreon page. Link: www.patreon.com/makeitextreme/

[@SendLead]

Another well thought out and designed project. I really enjoy watching your build process and your machining is like therapy for me! Love you guys

[@fassy72]

Oh yeah, you're amazing creative and skilled mechanic. Well done.

[@ΓΕΡΑΣΙΜΟΣΣΤΡΑΓΓΑΣ]

Τι φτιάξατε πάλι ρε θηρία . Μπράβο και πάλι μπράβο .

[@petervanderveer1933]

Peter from South Africa,very nice work,keep it up and show your skills to the world, God bless

[@JavierMayol]

The videography is in par with your talent. Great job to you, the crew and the editors! These are videos worth waiting on.

[@generalzugs6017]

You are the greatest, most interesting, most important youtube fabricator of all times. All this is true, because it rhymes.

[@opendstudio7141]

Nicely engineered and editing. It is always fascinating to see what you guys can do with recycled and repurposed salvage. It always turns into something amazing and visually entertaining. Give the director and cameraman a raise. 😉

[@jmiddlefinger]

You guys never cease to amaze me with your projects. Do you think maybe one day you might be able to do a video about your design process? I think that would be really awesome!

[@TomBlackthorne]

Fabulous. Every time I see one of your videos I want to run to my workshop and create something. This is one of your best yet!

[@andrewwatts1997]

This is how I like my machines. Over engineered to perfection

[@lazaroslazarou6526]

Every time!!! You never stop to amaze me.... both the project , the methods used as well as the video production!

[@The_Joker_]

Screw Hollywood this guy deserves all the Oscars! Excellent content, editing, camerawork and overall talent.

[@kentuckytrapper780]

You guy's are true machinist, great job, great video.

[@tagmenotdesign]

Unbelievable, you are still getting better, yet another great episode

[@MultiTom1956]

I am no fabricator or a mechanical engineer but i enjoyed watching every second of this awesome project 👌😊. Thank you

[@TobiasHoffmannWup]

What an amazing machine! So cool to see it from some 'old' parts come to life! And Thank you for the great camerawork

[@TheNeverendingProjectsList]

Between the machine work and the camera work... this is amazing.

[@tomconstant2389]

The good quality of your video editing shows off your job ! very nice work as always

[@jaymzx0]

Outstanding work, as always. Windshield wiper and treadmill motors seem to be the most versatile motors out there. Excellent use of the two! Also, that's an amazing idea of salvaging strut/shock absorber shafts for use as beefy linear rails. I hope the sander serves you well.

[@dkproductions3851]

Oh yes, I’ve always been fascinated by spindle sanders, can’t wait to see this one

[@Offline395]

I just can't believe what you are doing. Are you a human or robot. You are making machine. You are so awesome 😎

[@Donorcyclist]

I'm always amazed and impressed with the amount of thought and engineerIng that goes into each one of your projects. Great job on this spindle sander! Another impressive project done!

[@peterhackett178]

Brilliant! Masters of recycling. Well done lads. Outstanding stuff!

[@elliotstokes6134]

You're a magician, how does this video only have 200,000 views??

[@cez.majster786]

I love watching your movies, good job 😃

[@presley891]

I couldn't even skip a second of your video... So addicting...

[@Mikhandmaker]

Amazing! I love it

[@nikorncokkaew6009]

มี สิ่งให้ทำ ขอ ติดต่อคุณได้ทางไหนบ้าง

[@woodworks3585]

Amazing. Brilliant Craftsmanship and Design. Will outlast any Purchased sander.... 💯💯💯💯

[@MakeStuffwithLittleDevil]

Amazing job 👏👏👏

[@chasevollbrecht8085]

Without a doubt one of the best channels on my list diy inventions aint got shit on this

[@theinventionshow]

You are always better than the manufacturer

[@michaelcarter3149]

Never ceases to amaze me just how talented you are! Also reminds me how I need a bigger shop so I can actually build stuff like this!

[@4acrefield875]

Brillianty executed build , with such a high quality construction could the possible evolution of this machine have a router/spindle moulder function. A pleasure to watch a true creator 👍👍

[@FamilyRoots]

Brillant !

[@spuroszois2454]

Παιδιά πραγματικά 1000 μπράβο από που να αρχίσω και που να τελειώσω το μοντάζ που είναι άψογο το μεράκι γι'αυτό που κάνετε τις γνώσεις τις πατέντες ? Τι να λέμε τώρα κάθε βίντεο που βγάζετε είναι καλύτερο από το προηγούμενο συνεχίστε έτσι!!🔥🔥👍👍

[@petran2a]

Καλο μηνα φιλε μου εχεις Χρυσα Χερια εχω δει ολα οσα εχεις φτιαξει αυτο ειναι το κατι αλλο. Να εισαι καλα και να προσεχεις.

[@mcorrade]

man that's some off the hook engineering. no can accuse you of skimping that's for sure . very sweet

[@DanKoning777]

This could be useful as a metal sander as well with the right spindles. *Very well done.*

[@Pioner-77]

Риспект, красавчик, жму руку, всех благ в следующих проектах!

[@pasqualefontana2193]

Spettacolo... complimenti...ormai ti seguo da tempo...sei un vero artigiano...👍👍👹👹

[@mattgrimmett6067]

This was an incredible build. You are very skilled.

[@thomasschmidt9329]

Immer wieder eine Super Arbeit !!!!!!!!!!!!!!!!

[@mccanlessdesign]

Gorgeous, gorgeous - will copy yours exactly this winter!

[@АлексейЯннов]

you guys are the coolest. парни, вы самые крутые.

[@cuevas0420]

Amazing work I always enjoy ur videos 😀

[@AsitShouldBe]

Nice video! Congrats by a maker😉

[@garymucher9590]

Absolutely amazing build. When you have the correct machines and skills, build it. Thumbs Up!

[@petrichors]

Skillful and creative. Well done.

[@nicolaou8200]

Great Video ✌️👍

[@apstools5521]

Amazing work

[@mclam5623]

You are TOP. I like the way you made the tilting table. I'll will use the mechanism some day. 👍👍👍👍👍

[@micksbackyardaquaponics1408]

That was amazing what you bead there it was great to see it there. 👍👍

[@roberttandy7701]

The ingenuity of the build is amazing but trying to guess what it is till you see it in practice That's what has me hooked.

[@axpeg]

C'è poco da fare o da dire,.....sei il Migliore,...un pozzo di Ingegno !!

[@TheKilladp]

A perfect video to compliment a morning coffee

[@pinkponyofprey1965]

Oh, you also have a spindle sander now? About time ... :D That's on another level though! I'm always happy when I see a new video pop up from you!

[@whatme3473]

Grate video especially the layout and labeld shot of the electrical components at 17:07 . I've been looking for a layout like that for a while so I can finish my machine. Thanks lad's. ♤

[@unicoaleano]

wonderful work. the power of the small engine is incredible. Bravo.👍

[@cwgoforth]

Fascinating to watch your craftsmanship! Thank you

[@sarrpashypocrite3767]

Le génie c'est d'abord de la créativité. Beau boulot

[@iConstantinos]

.... είσαι τρομερός (γι'αλλη μία φορά)!

[@mus_xr4653]

Finally new video. Love your content.

[@blackkissi]

This man is a genius

[@zaneh6224]

Great work, to help it extract dust better, put some rubber bellows between the dust inlet and the underneath of the table, this will force all the suction to be around the workpiece 👍

[@donovanleeds4012]

Love it! Only word of caution I can give is to use a vacuum for the bulk of the wood dust before using the air compressor. Too easy to breathe that dust in since it hangs around in the air for a while.

[@GregsGarage]

Stellar work as always!!! I love the table tilt function.

[@razvanon]

great work ! awesome video editing too !

[@benjaminholmgren1356]

You are a master. Very impressive

[@jonnafry]

Design, innovation and execution ... love this content

[@olivierlemoine867]

Super video beau matos !!!👍👏

[@NicosProjects]

Great Job!!! Best regards Nico from Nico‘s Projects

[@anirban181281]

Simply put.... Genius.... 🙌👐🙌

[@fabricionascimento279]

Beautiful equipment, as always the best on KZbin.

[@Joash_Lenord]

awesome vid bro

[@stevecobb6001]

Greetings from North Wales! your channel is SOOO cool. Love what you do.

[@YovanNoel]

Dude. Awesome build. Nice work.

[@hubert3344]

Bonjour, merci pour ce très beau travail Salutation de France

[@tattoos1988]

Wow now I'd buy that machine genius the use of components well done sir thoroughly enjoyed the engineering aswell all the best for 2021

[@familiameirelles]

Rapaz, tu é caprichoso!! Tem boa vontade e ação criativa!! I'm from Brazil

[@sergiofilosofo3355]

Why I am not surprized about the Engineering and heavy machine, simply wow!

[@mangoretheogre4178]

that is an amazing build, that thing is gonna last forever

[@johnnyfannucci]

Incredible as per usual

[@LordAnubis0909]

this was a pleasure to watch.

[@serkisdav]

Enjoying the video, love u bro m!!

[@FarmerFpv]

That's mental. I love it!

[@CiceroMonteiro]

a diy project with scraps you hav laying around. very cool

[@johnnyfannucci]

Awesome work as usual

[@reforzar]

Wow! I want one with those features! Awesome stuff!

[@Everythings_Adjustable]

Excellent project Mate 🛠👍😊

[@timandrew4515]

So cool. Incredible to watch.