Project 096 | Making a Massive Electric Vise

The vise that we created this time is electrical compared to our previous one which was manual!
► Click HERE to subscribe to Make it Extreme: bit.ly/MakeitExtreme
► Second Channel: bit.ly/MakeitExtremeShorts
• Get the Plan: bit.ly/MIEplans
• All details: bit.ly/2DlPAVO
• Help us on patreon: bit.ly/MIEpatreon
Welding Machine:
• Mig: bit.ly/Rallymig
• Tig: bit.ly/PITIG
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3N6JE54
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.co.uk/shop/makeite...
-----------------------------------------------------------
Social Media:
• Facebook: bit.ly/Makeitextreme
• Instagram: bit.ly/makeitextreme
• Special Thanks to our Patrons:
✔TOP Patron: [Devin Bauste]
New Patrons: David Guindon, Wayne Hall, Thanh Sang, Martin Ivelinov, Syed Asad, Steve, Clifford Ellis, Robert Young, David, Carl Boney, Pierre, Blair Irwin, synkop360, Nikolay, Alberto, Bernard, Konrad Jaźwiński, Scott, Rory Donnell, forest18
• Playlist for all videos: bit.ly/2gZL4Dg
• Intro Design: vimeo.com/90149001
#makeitextreme #makeitextremeshorts #electricvise

[@gsppuffer]

There's people you want around you during a zombie apocalypse and you sir are one of my chosen to restore humanity

[@MakeitExtreme]

What's up guys! If you interesting to get the plans for our projects it's available on patreon page. Link: www.patreon.com/makeitextreme/

[@nickpeterson8080]

Awesome, I love your videos. Thank you for the hard work on bringing us inspiring content!

[@montwolfman]

P.S. Hats off to you for scratch building anything without a blueprint. Thanks for sharing your passion with us.

[@donaldtrumpoli9763]

I'm loving the new fast paced format, much more enjoyable! Also very good video quality. Great work guys!

[@humblehombre9904]

As usual, your project is a thing of beauty. But also your video plus the project is a gift to real men everywhere! Thanks for giving men a glimpse of what life can be when you use your hands for what they are meant for. My grandfather & father would have loved your channel. I myself do love it! Thanks!

[@aussieshed3417]

I love your creations guys keep them coming , very inspired I have even taken the huge leap to start my own channel to share My Creations & repairs.

[@gateway8833]

I miss a couple of videos and you’ve gone and got all kinds of part bins and other really cool stuff made, must be time for another marathon Make it Extreme video party, love the raised numbers and letters.

[@pensamaquina4777]

Impressionante ! Parabéns pela criatividade e capacidade de fabricar máquinas.

[@the_golden_ingot]

Thumbs up for sweet looking Footage!

[@stepcorngrumbleteats7683]

I can't WAIT for 0100, and I have NO IDEA what it may be, but I know it'll BE EXTREME ! Thanks for all your creative genius.

[@georgigeogiev8999]

Love the beer can disposer . Great job as always , keep the good work coming !

[@user-cs5rc3vr2f]

شكرا لك صاحب القناة انا من سوريا اتابعك من زمن بعيد.واجد في اعمالك الفائدة ودقة في التصنيع ومتانة في القطعة المصنعة واتمنى أن تضع المقاسات

[@markharrisllb]

To me anyone who can do this is far more intelligent that any degree, amazing.

[@romoalex]

He has a degree...

[@johnsmith-uf6ev]

@@romoalexin mechanical engineering I guess?

[@endeavour2127]

Another quality build! Your videos are addictive, have to watch them until the end!

[@user-lq9oh9bp8w]

Мне понравилось, как всегда смотрел с удовольствием, спасибо за ваши труды

[@Serzzz9978]

а мне сегодня не зашло.. говно слепили. куча ебанистически крепкой стали и пластиковый актюатор не вяжутся никак, даже если это типа тиски. хрень полная. поставил диз.

[@Rasstrel1]

У такой конструкции жесткости не будет. Литые из чугуна тиски, фрезерные к примеру наше все, мы на них запрессовываем подушки клапанов с усилием в три тонны влёгкую)

[@manifestoc]

Да, для размера тисков они слишком мягкие и слабые

[@vadimchernushenko]

Я не один такой значит )))

[@user-yf4hq1yi7k]

Отличная работа , молодец мужик 👍

[@TrekDreamer11]

lov the shop tool builds keep em coming nearly gave me heart failure with the grey spray until I realised it was base coat :-)

[@billiondollardan]

You guys do the coolest stuff. I want to go to Cyprus someday to see your shop!

[@my520graj]

Best can crusher ever.

[@eln74]

Man oh man, can't wait for machine #0100.

[@xXELevenXx1]

i hope that the #0100 is a big machine

[@RG-bw7xk]

Better mechanically than electronic ...It's my personal opinion ! work super . class !

[@plumberlife]

Extreme build as always!!!!!❣️

[@christosgrigoriades4277]

Wow! Amazing project! My favorite channel!

[@MakeitExtreme]

Thank you!

[@felixfromnebraska8648]

I just love watching your videos. Thanks for sharing.

[@4dirt2racer0]

dam thats a powerful ass electric actuator! i wasnt expecting that

[@asvarien]

I wondered if it'd have enough clamping pressure, clearly it does. Bravo!

[@qazwsxedc7448]

Purpose of this vice is not to be very powerful, but helpful to hold some bigger (long) objects. Wanna crush things, build a press.

[@reforzar]

I missed it! Congrats on 1 million! Great video!

[@midom9143]

I love your videos guys thanks for the sharing and thank you for the hard work on bringing us, very inspiring content.

[@MakeitExtreme]

Thank you!

[@kathirenu8596]

அருமையான பதிவு உங்களது ஒவ்வொரு கண்டுபிடிப்பும் அருமையாக உள்ளது ஒவ்வொரு அனைத்து பதிவிடும் தவறாமல் காண்பிக்கிறேன் நீங்கள் மேலும் மேலும் வெற்றி பெற எனது வாழ்த்துக்கள்

[@maks-e30]

Крутые парни ,крутые инструменты, итог, ,,крутые вещи! !!!

[@evilbrat5376]

Un-freeken-real, an electric vice which has some pinch to it also.Great build guys. . . . waiting on the next adventure now from you.

[@dejayrezme8617]

Oh awesome. Love your videos! A two way footpedal would be even better of course!

[@wrvolei1075]

Sou muito fã do trabalho de vocês, rapaziada parabéns !!! By Brazil RJ

[@bobber5534]

Those linear motion lead screw actuators have come a long way and is showing up in many applications. The couple applications I had to work on was there was one used to release bucket pins on a quick attach loader bucket. And the other one was used on a Vermeer SC505 stump grinder to engage and disengage the clutch. I believe they got their debut as a electric powered trailer tongue jack... As far as which is better hydraulic or electric, it all depends on the application. hydraulic would be more bulky with more component parts to make up the hydraulic circuit. Versus the electric version which is compact. The decision to use the electric powered actulator was a good choice. Just install a unit to suit your clamping pressure needs... I believe the guys did a fantastic job with fabricating a piece of shop equipment. And to all the naysayers, build your own make sure you record it with a video and then post it and let us see what you come up with.

[@jimmytomh.3790]

Dude! That's Sick! very inspiring

[@jeremyclayton3944]

Kick ass vid. Cat cameos had me laughing hard.

[@MrAwiebo]

6000N is probably the force of the actuator. What everyone seems to be forgetting is that the actuator isn't positioned in line with the clamps. Which on its turn is going to cause friction which will cost you clamping power. Probably not the best possible design.

[@Rubbernecker]

Wow, you do incredible work!!!

[@ConnorHolland]

Great work!

[@MCsCreations]

Fantastic job! 😮 Really well done!!! 😃

[@MakeitExtreme]

Thank you!

[@user-kt2hb8xr3p]

بارك الله فيك اخي انته حقا رائع في عملك واعمالك تسر الناضرين

[@ozzy1180]

Loving the projects you have built so far keep up the good work, project 94,95 are missing are you still working on them

[@buer82]

With that music and the cat, man it scared the crap out of me

[@sharpandloud3422]

Love the tiny vise on the monster vise at 4:08 😆

[@bagochips834]

Try putting the vice on a set of worm gears, it'll increase torque output from the motor and make it quieter so it doesn't sound like it's struggling quite as much, and it'll increase the actual compressive force of the vice so you can grip things more tightly with it.

[@diegorivero8300]

Muy buenos inventos épicos sigan así

[@lodso8083]

Wow I have feeling that this video was much more technical with things like the shaper or 123 blocks, nice job

[@stephennganga7499]

How much do you wanna bet he's gonna stick a home made hydraulic ram in it, in his next video.. great build man!!💪

[@krisschwennsen4206]

Cant it's not built for it.

[@headbanger6661990]

you sir are a metal hero \m/

[@fabiofboful]

Awesome as always.

[@achrafachraf-hb1ku]

عمل رائع ومتقن شكرا على الفيديو

[@vincentstraub9895]

Man your cameras are on point even metal shavings look awesome!!

[@user-cl6gf1of8w]

Perfect work!!!

[@notasbignow1]

Wow that's great O.M.G what a vice totally amazing really enjoyed this video

[@MakeitExtreme]

Thank you!

[@VijayPatel-mn4mc]

Superb sir...Watch your nice and finest work from India,.

[@paulohchagas1558]

perfeito como sempre.

[@crazymtbrider]

Definitely better than my old record vice

[@yaelrodriguez8322]

Thanks you for the good content!!! Rude vise !!!

[@exhibitless2386]

No one: My brand new pip-boy fresh out of the box: 0:59

[@kaumohlamonyane272]

Wouldn't one of your hydraulic cylinders be more powerful?

[@mitchellpatterson3323]

It's a vise not a press

[@kaumohlamonyane272]

@@mitchellpatterson3323 Actually your right, sorry my bad. Or else it would just crush the stuff instead of just firmly holding them.

[@aserta]

It can crush a square pipe of, apparent, one mm thickness wall. It's a waste of power with hydraulics. Like adding a JATO to the fastest production car in the world.

[@mitchellpatterson3323]

@@kaumohlamonyane272 No need for any apologies mate :)

[@oksandro29]

My dark and bad aspect 🤣, I am very perfectionist and exaggerated.

[@peteg9069]

Great vid, you make it look so easy.

[@Cristian8767]

OMG you have crushed the hell out of that DJ. :D

[@FOMI1970]

I was expecting a hydrochloric cylinder ... but an actuator, that's new !!! ... another awesome build dude.

[@evgeniydeus8137]

It's a vise after all)

[@madome3117]

Does a hydraulic cilinder also fit in there? And awesome work as always

[@qazwsxedc7448]

Yes it can be added later if you need more force (idiots complaining in the comments, that this vise is weak).

[@turbo2ltr]

Why is it that I had never heard of a shaper until a few months ago, and now everyone has one.

[@theguy3349]

Good idea

[@andreaspagnatosquit3844]

Great job, well done, that's a vise like that I'd need.

[@kalle8836]

nice english

[@galdinoosorioestrella713]

Que bonito trabajo hiciste amigo.....congratulations

[@MinhasA]

Best videos on KZbin!

[@tommyhill199]

I already have two cats... So, I am well on my way to having my own DIY/restoration channel. Most of the good channels I watch have cats. Now, I just need a workshop, camera, money, tools, a tripod, and better technical skills.

[@franksmodels29]

Awesome work great build 👍🏻👍🏻👍🏻👍🏻

[@midestinoelmundo]

1 MILLON SUSCRIPTORS AND CERO WORDS GENIUS !! PURE ACTION !!

[@psigeio]

Eξαιρετικη δουλεια !!!

[@emeltea33]

I have been thinking about making a can crusher as a small project... I see you got there before me, but made it extreme.

[@diegodistefano4594]

wow!!! Excellent!!! May be you must think in install a controller for regulate the power of that beast. Is it possible? Regards from Buenos Aires

[@manuelgarciafranco]

Impresionante. Saludos.

[@karicowo]

Super nice build. Although I would have loved to see a hydraulic system with a pressure regulator. You could set the exact clamping force easily.

[@qazwsxedc7448]

Purpose of this vice is not be very powerful, but helpful to hold some bigger (long) objects. It can be modified later (stronger actuator added, hydraulic).

[@aliroumani1702]

Excellent work 👍👌

[@TECHNICIANMEDIA]

You are my favorite tool maker. Thanks dear where are you from and what is your name

[@McJays]

They're from the Republic of Cyprus. No one knows anything more. Did a lot of research on them but there's nothing.

[@thaifoodtakeaway]

And that is how it should be. Please respect his choice to keep the identity private.

[@alanpartridge2140]

I believe there are two of them, one is called make it, the other is called extreme

[@danl.4743]

@@alanpartridge2140 It looks like there is only one now a days.

[@louis6593]

Those weldings... I'm quite amazed.

[@sidorowi4]

Как всегда круто. 👍 Смотрел с удовольствием....

[@brainfornothing]

Thanks for sharing !

[@R.E.HILL_]

Danish welding equipment for the win... 😊

[@robertgemski7728]

Efcharistó another awesome build!!

[@IpunkCrow]

alat kerjanya canggih

[@salempo111]

Excited for 0100

[@kingsleep1332]

Amazing work..

[@eduardojoseortizparra2116]

Espectacular trabajo

[@liboy34]

HI thanks for your greatest videos. What is the model of your migatronic welding machine?

[@giovannipetitti1588]

Happy Easter 👍👏👏👏👏🇮🇹

[@officialmysteriousrider6327]

Very clever mate

[@ashermalik4576]

very nice video bro keep it up

[@PaPhItIs88]

Nice one guys! 😀

[@tom18181]

Love that. Cool cat too

[@johnyeung6329]

well done, you made the worlds heaviest wood clamp

[@madeingarage7040]

Good job!

[@andreanocera78]

Respect from Napoli - Italy

[@AntiDot70]

I always enjoy a good squeeze.

[@feraszead4436]

Oh my gat it's very nice think you very much