DIY Champagne Wall Backdrop

www.etsy.com/listing/13234610...
www.etsy.com/shop/MakerDecor
/ makerdecor_
makerdecorations.com/
The links below are Amazon Affiliate Links and I may receive a small fee if items are purchased through links.
LINKS TO TOOLS BELOW
makerdecorations.com/tools/
makerdecorations.com/led-link...
makerdecorations.com/led-links/
Neon LED Strip amzn.to/3oHFPbN
Power Supply amzn.to/3cVNrEV
2-pin Light Strip Connectors amzn.to/3vryzF2
Neon LED Strip Light amzn.to/3oKzI6K
2-Pin 8mm LED Strip to Wire Connector amzn.to/3oIce1U
20 Gauge 2 Conductors Red Black Wire amzn.to/3JhzJIR
22AWG Wire Cord for Single Color LED Strips amzn.to/3PPZWkd
10Ft Outdoor String Lights with 11 Clear Edison Bulbs amzn.to/3BsNpPi
Wire Stripper 10-22 AWG Wire Splicer Cable amzn.to/3St3vyD
Utility Knife Box Cutters amzn.to/3zMuttx
Gorilla Super Glue Gel amzn.to/3zptqye
Solderless LED Tape Light Connector amzn.to/3zhuJzg
RYOBI One Jigsaw amzn.to/3cX9tr5
Ryobi Airstrike Brad Nailer Kit amzn.to/3Q5kF3L
Ryobi 16 in. Corded Scroll Saw amzn.to/3OOdf3g
Panasonic LUMIX GH5 4K Mirrorless Camera amzn.to/3cPUD5D
Kreg Pocket-Hole Jig 520PRO amzn.to/3zeMT4I
Pipe and Drape System amzn.to/3PUxWfd
Faux Pampas Grass amzn.to/3Qa1h53
Balloon Blower Pump amzn.to/3BAgJ6q
Decorative Vintage Wood Garden Wagon Wheel amzn.to/3PRbTG6
Sanding Sponge amzn.to/3SfbMps
Trigger Clamp Set amzn.to/3BEzgOS
RYOBI 18V Brushless Cordless Circular Saw amzn.to/3POjCVB
Ryobi Cordless 2-Tool Combo Kit amzn.to/3OIMRaY
90 Degree Corner Clamp amzn.to/3bltIy4
12 Pieces 20"x 20" Artificial Boxwood grass amzn.to/3zGFueT
Steel Spring Clamp amzn.to/3oFT9h7

[@annacalderon4830]

I appreciate you explaining the tool and what to expect! I could use the same quick lesson on the jigsaw I can’t seem to get comfortable with it

[@MakerDecor]

Thank you very much. I do plan on doing a beginner friendly how to tools based video this summer. I hope that will help!

[@joaomacaroco2083]

Thank you men you save my live good work 🎉

[@MakerDecor]

Thank you, good luck!

[@DamarisV]

Beautiful, love it!

[@MakerDecor]

Thank you so much!

[@audreyyy803]

Thank you for uploading your content!

[@MakerDecor]

Thank you, its fun making new projects!

[@lisajenkins1482]

Marvelous job as usual

[@MakerDecor]

Thank you for your comment, always try to put my best out there!

[@dominiqueturner4108]

It’s looks great!!

[@MakerDecor]

Thank you very much!

[@geraldhanson2453]

To save time line the shelves up, clamp them together, mark where the holes are going to be and drill out your holes all at once.

[@MakerDecor]

Thank you very much for watching the video and commenting. Yes that is definitely a time saver!!

[@DeeDee-Sweet]

Oh Looks nice!!

[@MakerDecor]

Thank you very much, I appreciate it!

[@mikeinpenna]

I like your idea on how to join the top and bottom, I have made ones using a hinge part way up. I use 1/2" plywood with 1x4 for the shelves and sides. I use a different drill bit so I don't get blow out. I also use a round over bit for the slots and holes. Most people are shocked at the price, especially when you add the box wood.

[@MakerDecor]

Cool, let me know about that bit. The blow out is a pain to clean up, lol. Yeah I was gona show the router with a round over bit, but I tried to simplify my build for people just starting out. And yes some people don't realize the cost of wood went up and then your time to build it. For sure some people will always want to try to take advantage. It is always best to sell less and make a profit. Then sell a lot and lose money, I have done both lol. I have seen some people make things and sell just above material cost and I couldn't afford to do that. And you always get what you pay for, keep making!

[@mikeinpenna]

@@MakerDecor I use a Forstner Bit and then use a round over bit, smooths out the edges for the glasses

[@TulsaDave3]

I'd love to see the plans for this. I need to make one of these for my son's wedding this summer

[@jessicamendiola59]

Hi!! As always you rock! I wanted to ask…you recommend still adding hinges on the side of the two piece style one?

[@MakerDecor]

Hi, thank you very much. And yes I do, its not very much extra work to add them and will help keep with alignment over time.

[@aboveallcreations6760]

Hello I love your work I have been binge watching your videos. As I’m watching this video right now I’m wondering what is the blue thing in your hand or what is the tool you use to measure after you drilled a hole to make the line for the glass what was the measurements for that what was the thing in your hand that you use to measure the line under the hole.❤

[@MakerDecor]

Hi, thank you so much for watching my videos and taking the time to comment. That tool I believe you are referring to is a combination square from Empire. All it does is make it easy to accurately measure smaller sections. You can use a measuring tape but for somethings I prefer that tool. Hope this helps, thank you

[@IAMDAVENNA]

Hi. What did you use to make the grass stay inside? A nail gun?

[@MakerDecor]

Hi, no just a hand held stapler. You can purchase at walmart or home depot for like $7.

[@djskillz24]

In your plan you have a board router as tool required where did you use that in the video ?

[@MakerDecor]

Hi, for those with more experience a router is great choice to round over the wine slots. But I did not put it and chose to sand as this is a easier step for most than utilizing a router. Also some people use routers as cutting tools, which is not something I do. But I leave my plans as open to utilize the tools that you have on hand. The plans are written in a way that the concept of what is needed is shown and you can decide which tools or way you would like to get the results done as everybody's tools and skills are different. Good luck!

[@s.atkins4706]

What size wxl is the plywood

[@neshachristian-hendrickson5598]

What’s the grass you used called?

[@MakerDecor]

Hi, it has a couple of names. But you can get easily from amazon. Just search boxwood panels, grass wall panel, hedge wall panel or grass wall backdrop. Good luck

[@neshachristian-hendrickson5598]

Thanks@@MakerDecor

[@c_moniea9711]

Are the plans available for this?

[@MakerDecor]

Hi, I am finishing them up right now and they should be up Monday evening. Thank you very much for the support!

[@kizziewoods5749]

How tall is your Champagne wall?

[@MakerDecor]

This one was 6ft I believe. But easy to change the size.

[@MzKinkyCurl]

Where you been?!?

[@MakerDecor]

lol, yeah been busy remodeling the workshop so I can make it easier to build. I also have been filming a lot of stuff, but havent had the time to edit it. But there should be a lot of vids coming this week and next. Thank you for watching the videos!!