How to Make a Chiara Wall Backdrop for Weddings, Birthdays, and Other Special Events

makerdecorshop.com
The HOW TO MAKE THE JIG VIDEO PART 2 WILL BE UP TOMORROW MORNING.
www.etsy.com/shop/MakerDecor
/ makerdecor_
makerdecorations.com/
In this video, we'll show you how to make a Chiara Wall Backdrop with Ripple Wall cheap - No CNC Required! This backdrop is perfect for events like weddings, birthdays, and more!
If you're looking for a unique backdrop for your next event, then you need to watch this video! Chiara Wall Backdrops are perfect for weddings, birthdays, and more, and this backdrop is a simple, cheap way to get the look you're looking for. Watch us in the video how to make this backdrop with just a handful of supplies, and you'll be able to create a beautiful Chiara Wall Backdrop in no time!
The links below are Amazon Affiliate Links and I may receive a small fee if items are purchased through links.
LINKS TO TOOLS BELOW
makerdecorations.com/tools/
makerdecorations.com/led-link...
makerdecorations.com/led-links/
Neon LED Strip amzn.to/3oHFPbN
Power Supply amzn.to/3cVNrEV
2-pin Light Strip Connectors amzn.to/3vryzF2
Neon LED Strip Light amzn.to/3oKzI6K
2-Pin 8mm LED Strip to Wire Connector amzn.to/3oIce1U
20 Gauge 2 Conductors Red Black Wire amzn.to/3JhzJIR
22AWG Wire Cord for Single Color LED Strips amzn.to/3PPZWkd
10Ft Outdoor String Lights with 11 Clear Edison Bulbs amzn.to/3BsNpPi
Wire Stripper 10-22 AWG Wire Splicer Cable amzn.to/3St3vyD
Utility Knife Box Cutters amzn.to/3zMuttx
Gorilla Super Glue Gel amzn.to/3zptqye
Solderless LED Tape Light Connector amzn.to/3zhuJzg
RYOBI One Jigsaw amzn.to/3cX9tr5
Ryobi Airstrike Brad Nailer Kit amzn.to/3Q5kF3L
Ryobi 16 in. Corded Scroll Saw amzn.to/3OOdf3g
Panasonic LUMIX GH5 4K Mirrorless Camera amzn.to/3cPUD5D
Kreg Pocket-Hole Jig 520PRO amzn.to/3zeMT4I
Pipe and Drape System amzn.to/3PUxWfd
Faux Pampas Grass amzn.to/3Qa1h53
Balloon Blower Pump amzn.to/3BAgJ6q
Decorative Vintage Wood Garden Wagon Wheel amzn.to/3PRbTG6
Sanding Sponge amzn.to/3SfbMps
Trigger Clamp Set amzn.to/3BEzgOS
RYOBI 18V Brushless Cordless Circular Saw amzn.to/3POjCVB
Ryobi Cordless 2-Tool Combo Kit amzn.to/3OIMRaY
90 Degree Corner Clamp amzn.to/3bltIy4
12 Pieces 20"x 20" Artificial Boxwood grass amzn.to/3zGFueT
Steel Spring Clamp amzn.to/3oFT9h7
Mattress Bag for balloon garland amzn.to/3NyT8ad

[@le5132]

😂the way u kept adding at the end there got me crying 🤣🤣❤️

[@MakerDecor]

lol, thank you. I thought I should add some more of the random process behind the scene. Thanks for watching!

[@MzKinkyCurl]

I think you did very well with the floral. Asymmetry is key 🔑 with those dried floral installs! Love your videos!

[@MakerDecor]

Thank you very much for the tip. I definitely want to try floral again soon!

[@Es5.374]

So pretty, love your work 🥰

[@marisolcarter3733]

Lol u did fine , u don’t have to b perfect so no kind should judge u on that ! just showing us the wood work is amazing , I do appreciate it , I’m learning the tools u use n practice lil each weekend I can …. Thank you !!!

[@MakerDecor]

Awesome, thank you and glad I can help!

[@TammyJewelry]

Wow great idea ,, and seems pretty simple ❤

[@patatatoe2809]

Great video sir. I appreciate the hard work and realness you bring to your videos. This one is one of my favorites for sure.

[@MakerDecor]

Thank you so much. I never know what to include in my videos and was kinda hesitant because of it. Thank you for the encouragement!

[@aburk8417]

Love it!!!!!!

[@MakerDecor]

Thank you very much!

[@user-cs2fs4jh8l]

So creative! You are gifted.

[@MakerDecor]

Thank you so much for watching!

[@justagirl6467]

At this point I believe you can teach us to walk on water. Such an amazing teacher! I just seen a guy cutting out a wood Christmas tree in a video yesterday. Then here you go, I love it! Have you ever given us workspace tour? Made my brain perk up when you pulled down that backdrop for photos. Also top 5 tools we should buy remake the most popular items on your channel. Sorry if you already have these, I'm new to your channel. Stay amazing !

[@MakerDecor]

lol, glad my videos have helped you. I have not done a workshop tour yet. I was planning to do one before the year ended, so hopefully soon! Hmm that is a good idea about the top 5 tools. I may have to do that soon, thanks. Thank you so much for watching and commenting!

[@Failureisnotanoptionever]

This is so great! Thank you

[@MakerDecor]

Your welcome, thank you!

[@yang9553]

Lol love the ending!

[@MakerDecor]

lol, thank you

[@biancavega8025]

Thank you so much for this video 🥹

[@MakerDecor]

Your welcome, thanks for watching!

[@andreacline7141]

You are so smart about making things with wood, floral decor not so much. Just kidding, I actually thought it was pretty when you got it done. I appreciate your ingenuity when it comes to translating your ideas to people like me with no wood skills. Thank you for breaking it down so it is easy to understand. Hope you and your family have a wonderful Christmas and New Year.

[@MakerDecor]

Thank you very much, I definitely want to get my floral game better lol! Thank you for commenting and I wish you and your family happy holidays as well.👍

[@Angel2992]

Great work!

[@MakerDecor]

Thank you!

[@mirandabee4029]

Lol, you are funny buy did an amazing job!

[@MakerDecor]

lol, thank you very much!

[@kateconnolly9467]

Amazing

[@MakerDecor]

Thank you!

[@veronicasantoyo2545]

Good job 😂

[@MeowMeowzzz_]

🎉🎉🎉🎉 amazing!!! Wait can I buy that jig

[@MakerDecor]

Thank you, I am working on this and hopefully will be out in a couple of days!

[@AdriansGalaxy]

Make the jig longer so you can reach the other side and still go in the same direction.

[@MakerDecor]

Thank you. Yes that thought came to mind when I was editing the video or I may be able to change some other things to the jig as well. I am going to have to look into that for sure. Would definitely make this a lot easier because that was the only tricky part. Thanks for the suggestion!

[@Bhargavi09]

Great work😊, can you repaint these ripple arch,

[@dolcerentals7167]

I just bought a router myself and I'm been watching videos on how to use it, I'll be buying your plans, are they available on Etsy? The floral design 😂😂 you had me laughing

[@MakerDecor]

Thank you, I am going to have the plans on the new website I am working on. It should be up and running by next Tuesday. Makerdecorshop.com And thank you, I was nervous putting that in at the end of the video. But that's the way I am, always second guessing myself lol. Thank you for the support!

[@GODWYNVLOG]

what is the specific name of your tool you are using to create that awesome one?

[@SabiBelyanov]

Than you for all your videos! Could I ask you about the size of the bit?

[@MakerDecor]

Your Welcome. The bit I used was 1/4 inch spiral down cut.

[@sannisha2541]

Hi! When will the instructions/template be available? Didn’t see it listed in your Etsy store.

[@MakerDecor]

Hi, I am working on it and hope to have it available this weekend. I am actually going to have it and the jig available on my website I am building. Makerdecorshop.com Thank you so much for the support!

[@xoticmarvelreptiles4459]

Came out amazing. What kind of bit you used to make the ripple

[@MakerDecor]

Thank you. People use mainly three types. Round over, cove or a spiral straight. The one for this video was I believe a spiral down cut bit, but a spiral up cut bit will work as well. Doing different bits will change the look slightly. If you google these, some images will pop up showing the profile they do to wood.

[@xoticmarvelreptiles4459]

@@MakerDecor thank you so much i really appreciate love watching your video always learning new things

[@shayne_dip]

What thickness of wood are you using? Or what would you recommend? 3/4”?

[@MakerDecor]

Hi, I used 1/2 inch plywood for this and works well. I try to avoid 3/4th as much as possible just because of the added weight. They can get heavy quick. Thanks for watching and good luck!

[@isairoman3127]

What type of router bit were you using?

[@MakerDecor]

Hi, I believe a spiral upcut bit

[@ochiechick]

What size plywood are u using for this?

[@MakerDecor]

Hi, 1/2 inch thick

[@remymimi388]

Hi, do you have the link to the router that you used? Thanks.

[@MakerDecor]

Hi, it is from Home Depot and it is the Ryobi Brand. It is their newest router that came out. I will put a link but check the website a lot because they put it on sale a lot. The original price is like $100 but I got mine for like $60 and sometimes they have it for less? Home Depot has a lot of sales of their Ryobi Branded stuff every other day. Just make sure it is their newer one like the one linked below www.homedepot.com/p/RYOBI-ONE-18V-Cordless-Compact-Router-Kit-with-2-0-Ah-Battery-and-Charger-PCL424K1/320639499

[@remymimi388]

@@MakerDecor Thank you! I just purchased the jig from you. Hopefully I can make it as nice as yours. :)

[@MakerDecor]

@@remymimi388 Thank you for the support!

[@remymimi388]

May I get the link to the clamp that you used too? Thanks.

[@yellowhammerwoodcrafts]

You have that jig for sale?

[@MakerDecor]

Hi, yes at makerdecorshop.com. Just wanted to say I have seen some of your videos and you make great content! Keep it up

[@yellowhammerwoodcrafts]

@@MakerDecor thanks man! I like your content as well.

[@motunrayoadelakun9526]

Do you sell these props?

[@MakerDecor]

Not at the moment, but hope to eventually do that on our website makerdecorshop.com I do not have a time set when that is possible, sorry. Thanks for watching!

[@gelidecor7790]

Do you sale props

[@MakerDecor]

Hi, I do have a website makerdecorshop.com that has some of the products I sell. But I do not sell the larger projects yet as shipping cost does not make sense for me at this time. Thanks for watching!

[@ritajirjees3949]

Hi ,Where do live bro please

[@MakerDecor]

Texas

[@2lbssugar477]

I dont want to make anything..just buy your pieces from you...make sure u make them collapse

[@MakerDecor]

lol, well I appreciate your honesty and I am trying my best to make collapse so it is easier to ship. And thank you for the support!

[@Failureisnotanoptionever]

@@MakerDecor keep us posted please because I’m ready to place my order!