canon printer paper feed problem

diy • 3d printing. vase from...
Curved tip tweezers for reverse action : cutt.ly/zTE2tEM cutt.ly/OTE2bNS
/ hardwareboy0

[@killstacy]

tell me how i couldnt find my tweezers to pull the item lodged in the printer out.... It was my tweezers. LOL Thank you for this video.

[@PAK-Indulekha-Nair]

Thank You, I didn't have to remove this much but there was a pen stuck in the paper passer thankfully my hands could get it out

[@crystalhenson9860]

I absolutely love you 😂 I fixed this thingy madohickie all by my lonesome ! Ha put that in your pipe and smoke mr.Namauu!

[@charlyyoung6501]

After coupling my own it couldn't on what could be the cause

[@dethsgreetings]

So cleaning is the key. My Epson tank has a problem with feeding. The right side feeds in. Though it feeds the paper but it is not aligned.

[@princedube8332]

Mine wasnt taking the paper inside.. so I followed your steps and found nothing inside, I guess the feeder had given up, luckily I had another exact printer laying by with damaged print head. So i substituted the print head to the older printer and resumed printing.

[@ofirrob1366]

thank u so much for this video, my wify thinks that I am a wizard now!!

[@hardwareboy5079]

hhhhhhhhhhhhhhhh

[@TanksRock]

Absolutely fantastic video that very easily helped me to fix the printer. A sweet wrapper was the cause

[@johnkosick1464]

Great job...........How did you know how to take the unit apart ? Did you have the "service manual' ? I have an MP210, and I don't see the Paper feed roller turning to feed the paper. I don't see how to get the back cover off to access the rollers. Can you help with that issue ? I'm getting an E2 error and there is no paper jam.

[@markheddisonbacsain]

Thank you for making this. I was able to fix the company's printer by following your steps in the video. The problem was caused by a stuck paper clip.

[@truegrittechnologies234]

Thank you so much for thus video...I almost through my printer away and after watching I pulled USB cable out because of your help. God bless your channel my friend.

[@JCain-hq2mx]

Do you think it is a coincident that I had the exact same problem? I tried to vacuum, shake, bounce around my printer and could not find anything stuck in it. I only used it a few times before this happened. I thought for sure I had something stuck in there. I could see the wear on the main roller. When I finally got it apart, I could not see anything. I shook it a little more and could hear something. There was the culprit! A YELLOW BEAD!!! I do beading, so it wasn't a huge surprise until I saw MY YELLOW bead!!!! WTH???

[@adisiavibezlit]

It was really helpful.

[@emondebdas4872]

thankx a lot.. i fixed my own printer by seeing your video.... and think what i found inside... a razor blade.. rofl.

[@josiaskoekemoer2506]

Lol i shaked my printer and a piece of rock fell out, saved me time from opening it,still need to get ink sorted because it was standing a long time

[@bhavanamerugu109]

How to solve paper jam and cutting little bit paper in printer mdl of canon G2010

[@nadymmiew]

After it solved no more ink with tanks why sir

[@DataDashy]

Wash your filthy hands 😂

[@sebastian.arancibia]

Thanks bro!

[@KrishnaKumar-i6u6w]

Dear Krishna , saw your video. Great work with sharpness on your expertise. My CANON G 3010 is showing Error P 10. Mother board got checked. It is OK. he CANON Technician is confused. Could you, kindly, get me your address or Contact No so that I could make further contact and query. Shall wait for yor reply.

[@francoisgs1]

my canon4570 is telling me my loaded paper is not the right size when I printed earlier with no issue whY?

[@gogetablue7905]

What happens when there's some chunk of paper still inside and printer still working? does that mean the printer has some fail safe or should I still try to remove it? I can't see it visually

[@shreexerox-j5o]

jay shree mahakal

[@punithskumar1]

hi my cannon printer mg3640, is unable to take the paper, when i checked, the rollers are not spinning, any suggestion, how to fix it?

[@ruqaibmir207.]

Bakvas mera thk nhi huva

[@LOKENATHENTERPRISE-iu9mq]

thank you for the video. really helpful

[@GarnettBedenbaugh]

I did everything he showed, found the stuck item, but now the power will not come back on. I made sure to plug in the motherboard wires. Blue side of the wire to the smooth side and metal to metal. It will power up just the initial plug in, causing the ink to prime. But when I press the power (start) button, it will no come on.

[@adarshjha4069]

Same problem

[@raghulkannan]

Check if the motherboard pins are damaged (I kept the scanner opened as shown in the video, but I haven't noticed that it was on the wall, not hovered like I did which pulled the pins in the motherboard)

[@ggrr100]

found the tiny hair clip in the paper roller and this video saved the day. Thank you.

[@annalisaarneld9736]

This is absolutely helpful! Thank you so much! You are a hero!

[@krishnanm8900]

two paper print picku1time . how to solved

[@zakiataylor4771]

I did exactly that and retrieve a plastic thing that fell into the printer. All going swimmingly until I plugged it back and there is no power whatsoever. Any suggestions please?

[@princedube8332]

LOL

[@ariesacardino9492]

Printer fixed. Thank you so much😊

[@MissionaryForMexico]

By not talking, you did not tell us how to fix the printer? You took it apart and tested operation, but you never said what you did to make it work?

[@hardwareboy5079]

3:40

[@samisami-ro7bj]

Hello.What isthe probleme my feeder paper take few paper how to fix it?

[@wilwordsworth]

Nice one. I just pulled a miniature cardboard parcel out of mine. 1x2 inches it is amazing what can be hiding inside that area. i did not need to disassemble just poked it out with the cereal box card trick. You should be able to force an A5 shape of cereal box card through a clear printer with power off. A reverse push (from the front) revealed my blockage. Thanks.

[@juliusmarchan9121]

Opm

[@elmeropone5380]

you can flip the printer to remove the debris.no need to baklas.

[@MsUndertaker97]

hello sir how yo keep the paper go on even when the cover is open. i cannot find smtg physical and i stuck when the paper cannot go through because it says the cover is open so cannot proceed printing

[@amahoro6064]

Check at 4:48

[@petlover4212]

thank you i saved P500 haha may naka barang piso

[@lifelyrics5659]

I love dismantling thats all

[@jcproject6408]

Napakarami palang kakalasin pag ganyan ang problem.

[@nelldeleon9349]

thank you!!! grabe lumabas agad yung bumarang suklay hahahaha gulat ako eh

[@mamdouhmahmoud9287]

Thanks very much

[@mickwolf1077]

The weirdest things get caught up in em

[@djbiscuit2170]

thank you so much! my printer was broken for so long and this video saved it from a trip to the dump!

[@connectionnetpoint4288]

SUPER Bro Thank u

[@colenewright3517]

Thank you soooooo much!

[@ega2800]

Good explanation

[@JarnailSingh-cs3cf]

Thanks brother

[@bikashshrestha5461]

Thanku boss

[@Suman_meena4151]

canon g2010 पेपर खींच कर E03 ERROR आ जाता हैं , गियर व TRAY को साफ कर दिया व ग्रेसिंग भी कर दी फिर भी पेपर खींचकर E03 error aa raha hain please solution

[@supunrangikavidanaarachchi6600]

Thank a lot.

[@imprimerieprovidence2901]

Awesome 👌🏽

[@mentalonmorphine]

Thank you for posting this! It was exactly what my issue was, except mine was a scrunchie LOL

[@marvinunumadu97]

Great help.. thanks

[@valtersouzaribeiroribeiro9534]

Parabéns

[@bennelson7127]

I can't believe I actually fixed this printer and I have you to thank. I seriously had a bead stuck in there that I couldn't see and had to force a sturdy piece of paper/cardboard until when I pulled back on the paper it kicked out the bead! Glorious day for the handyman!

[@mayurparasramka5545]

Video was helpful...saved rs 5000 for us

[@moscopledge8293]

My Canon g3411 shows e09; the print head is not moving while it is plugged on current how can I clear the code?