New Parts, Showcase & More! - Multiboard Update

[@ObsiVision-Labs]

We are going to to need a Multi-Grid simulator as well.

[@garybarnes4169]

Jonathan, you are the mutts. Nuff said.The fact that I bought my 3D printer just after you released Multiboard is fantastic. I'm still chugging away printing core tiles, but look forward to the day that they grace my utility room wall.

[@heyspookyboogie644]

I’ve seen a ton of comparisons between multiboard and Honeycomb wall, but man would I never give up those pegboard holes & hooks. They’re strong, print easy, you can get them in and out repeatedly without breaking anything, etc.

[@andre2028]

Hi, do you mean the Standard Peghole Boards?

[@dwatts51187]

Yep. Definitely need a gridfinity cross compatibility plate and mount.

[@EJBS1991]

This Multiboard project has been a masterpiece

[@soysmc2933]

Thank you for your hard work on this project! Keep up the great work!

[@DaleyKreations]

There are 2-3 videos now on how to assemble and mount the Multiboard backplates but now that Multigrid has had an update/upgrade I would LOVE to see a video that goes more into how that system goes together, aside from the brief glimpse in the launch video. Like do all the compartments naturally slide, or do you need a particular part to do that? Do you need a base AND a plate etc.

[@GeisterPilz]

The reason i stopped supporting : no manual or info on what parts are doing, or whats the difference of the parts, what parts are needed aso.

[@42sol]

I love your high quality content. Thanks for keep making amazing stuff

[@Itzryan288]

This project was already amazing but it keeps getting better

[@heyspookyboogie644]

That removal tool works GREAT. Was a little tough to get together cause my printer just isn’t quite dimensionally accurate enough with the filament I used, but man is that tool stronger than you’d think.

[@soysmc2933]

I had the same dimensional accuracy issues with my printer. I would recommend checking out one of Stefan's (CNC Kitchen) new videos about the califlower. After a couple tries, I got my printer to print the multiboard perfectly.

[@heyspookyboogie644]

@@soysmc2933 I actually bought it when I saw that video but had just switched over to klipper and didn’t think I had enough other stuff tuned since cauliflower is more of a last step, but thanks for the reminder! Definitely should do that now! Do you have to do it per filament or is it a more general thing? My accent snaps and stuff are all silk PLA which expands a bit. Think I have the extrusion multiplier set to compensate but if I have to do a separate profile for silks I will.

[@soysmc2933]

@@heyspookyboogie644 I would say the califlower is more of a mid procces thing. I printet mine, when i had calibrated Z-offset, flow/extrusion multiplier, linear advance, and temperature. After this, I was ready for the Califlower. First of all you need to calibrate your X and Y steps per mm (this you also do with the califlower). This way you are making sure your moters actually moves fx. 100 mm when it is told to. For instance, my bedslinger only moved about 98 mm in the Y. So print it out, and in the steps per mm section, input you old values from printer.cfg, and the excel will give you your new value. Print the model again, until you are happy with your results. Now you can think about other types of filament. I have calibrated every type of plastics (PLA, PETG Etc), and every manufacturer of the same material. For the other filaments, instead of tuning your steps per mm, you tune your extrusion multiplier. This you do the same way as before, just with another setting in the excel (extrusion multiplier). Ps. I think Orca, and Superslicer is the only ones who have per filament extrusion multipliers, so might wanna switch for the convince. I recommend Orca slicer :) Hope this helps :)

[@adamfilipowicz9260]

many changes.. I will keep waiting until the dust has settled

[@bryanduke1]

Thanks for all the hard work. Happy to be a user and supporter.

[@jurassicplayer9901]

I'm not sure of the feasibility, but it would be nice if the planner also included a total estimated amount of filament needed and maybe even a quick cost per kg.

[@AlanTuringWannabe]

This is all very exciting!

[@Aztechnology.]

Amazing work and amazing community

[@ObsiVision-Labs]

Geez the multi board simulator is going to change the MF game! Hell yea.

[@heyspookyboogie644]

Finally made a couple little pieces that pop onto the multiboard shelf brackets to hold pex tubing for a tape rack. Way more space and filament efficient than other tape racks I’ve seen.

[@ArtinKavousi]

so nice 5to see you backkkk

[@heyspookyboogie644]

Oooooooh a multiboard planner would be amazing! I’ve reorganized my multiboard like 3 times in a week cause every time I wanna add a couple things the layout doesn’t really work efficiently and it’s not quite as easy as a normal pegboard to move stuff around.

[@erickhernandez7716]

i love multiboard

[@heyspookyboogie644]

Can’t wait to see more shelf stuff. Been trying to figure out how to use multiboard to organize all those plastic divider boxes when you buy screw / part assortments off Amazon.

[@terryjones9784]

I just made a free-standing foot with 2x1 Gridfinity on the bottom!

[@alexberner1590]

I'm stoked to start printing this! I noticed that the Discord invite on the website is expired, is there a new invite link to join?

[@fabricioyukio]

Are there variants or instructions for using a resin 3d printer (Elegoo Saturn 3, in my specific case)?

[@DavidAragonG]

Hi !! Great work, I´m looking to start with multiboard at home. I want to print my tiles with a 0.8 nozzle but ... 0.2 layer, and the details needed, is this impossible? Thanks!

[@AgnarBurnsAll]

one thing i'd like to see is different shapes for the back board that can still interlock with each other and the stand shapes so you can get some designs going on like a multiboard wall in the shape of an Octogon and what not.

[@kitkat0981]

when is the atach a bin to a board going to come out? Im trying to figure out how to attache my different bins to my wall multiboard. help please !

[@diwest1737]

What size screws are needed to mount to the wall with 8mm & 15mm offsets?

[@sotoslee5437]

what filament I use to print it? can i do it with petg?

[@RussianThunderrr]

-- Hello, what color filament did you use to get that nice very-very light gay with specs of blue? It looks very good where can I buy it? Thank you! P.S. I subscribed to all of your channel, and waiting for my first 3D printer, so I'm looking forward to try your inventions.

[@christianknight2905]

How many grids can a 2.2kg spool print?

[@Keep-Making]

You get about 10 8x8 tiles per 1kg 😁

[@christianknight2905]

Thanks..getting my first printer Friday. I happen to be redoing my work bench at the same time...perfect time to find your vids!

[@173rdUSmilitary]

What filament did you use on your multiboard? Like Color and Brand

[@anpc86]

This is so cool, looking to get into 3d printing, this stuff is just insipring. Been watching videos from the different systems, amazed by these individuals. Way to go man

[@wlcmetomcyds]

I'm printing a wall for my video games and need to do a lot of shelves, should I wait for the next update?

[@heyspookyboogie644]

Does the tile height being 6.5 or 6.4mm change anything if your first layer height isn’t 0.2? I use 0.3 or 0.35 for the first layer usually and 0.2 after that.

[@enyoc3d]

very cool! i have a shed that gets hot in the summer, so i'm assuming PLA is a bad idea. do you recommend petg or something else?

[@LordWiseWolf]

Wonder if I could do multiboard D&D tiles…

[@ulaB]

I am not sure my brain can handle all these different parts and combinations. =)

[@saliston]

i like multiboard and have it mounted but having a bear of a time finding the mounts i need for my tools. i dont have the time or knowledge to design my own

[@realthing00]

Did u made these in blender ?

[@Printoiid]

Why aren't any of these files on Github?

[@elainajourney]

I feel like I’m missing something. Why put all of this development time into multigrid instead of just improving gridfinity? At the end of the day they serve the same basic purpose and I don’t see a reason why you couldn’t apply your improvements to gridfinity. The system already exists and has a big following and library of parts. What am I missing?

[@zhafranbashir1979]

Its all about the money it generates from the subscription.

[@mineline5620]

Try screwing gridfinity to a wall. Try putting a bin on a gridfinity mounted on a wall

[@elainajourney]

@@mineline5620 I already have multiple times in different ways. What’s your point?

[@mineline5620]

@@elainajourney multiboard is just way easier to assemble than assembling something that is not designed for mounting it to a wall. Gridfinity is designed for use on flat areas like drawers or smth.

[@elainajourney]

@@mineline5620 you are incredibly incorrect but okay

[@travisjohnston1923]

The number of times he says bits... Lol

[@whitebloodcell]

That is such a mess, dozens of the same stuff with no instructions.

[@mlrable]

Try telling us about products not bragging about your downloads

[@nova5224]

You dont make it easy to unsub from the peg board shit. Holy crap this shit is almost a scam.

[@Keep-Making]

Sorry you feel that way, I subed on an alt account and found it relatively simple. I had to go was go to thangs > settings > down to billing and just click cancel membership. Mind sharing how it was a pain?