The funny thing about Nerf modding is that I learned more than I ever did in science class.
@MakeTestBattle9 жыл бұрын
+Harry “DraonEye” McGuire This is exactly want I wanted to hear when I made these guides! Thank you. -R
@PowerBros90019 жыл бұрын
Didn't we all?
@jmt68237 жыл бұрын
Hi
@nanospectral7 жыл бұрын
Harry McGuire So true 😆
@gibranahmed57887 жыл бұрын
same
@mattvonnerf34956 жыл бұрын
I always refer to this video when doing a Stryfe mod/upgrade, it covers all the fundamentals, and you can add/change bits if you like to suit your personal build. As there's a great overview of the internals and in-depth detailed descriptions and video of everything being done, this is a great place to start, or just use as a quick reference/refresher. Thanks Ryan and the rest of M.T.B! I'll be doing mine soon (along with some other stuff) with some Meishel 2.0 motors in a stock cage with stock flywheels for my KZbin channel, you guys have been an inspiration for me! I don't have much content yet, but I think I gave you shout-outs in my intro video, among some other for your contribtions. I'll have more (better quality hopefully too) videos, once I've edited and I'm happy with them.
@feltpen469 жыл бұрын
this is boring, THIS IS EXCITING! damn that was funny
@traceputtz5 жыл бұрын
Followed this tutorial along with the one from the OutOfDarts book, Drac mod guide. Turned out great. Used a Graphene 0.95 LiPo to power 2 Meishel Motors with the Worker 3.0 flywheel cage, Containment Crew flywheels. Don't have a chrono yet but similar builds get up to 150 fps. all under 200 dollars including wiring, connectors, heat shrink, a LiPo smart charger, extended mag release, omron switch, and a custom switch plate. This took my level of interest to a "Oh cool, wish i could do that" to a "I need to show my friends that this launches waffle heads halfway across a football field". THANK YOU SO MUCH for this. Great video, answered almost every question i had, only trouble i ran into was the switch, which is very tricky to get right.
@devon84195 жыл бұрын
You ca get even crazier performance for $9, with fangs. I tried waffles in mine and half get decapitated. I'm getting high 150s-mid 160s. I use adventure force darts no and they're the best, cheap at Walmart, heads stay on, super accurate. A 500 tub is only $20
@reddabrigety56874 жыл бұрын
Out of darts sells switch mounts on his store
@Cringemoment40454 жыл бұрын
Well done my dude. I got 200+ w/dual stage
@Jangular9 жыл бұрын
Another great tutorial video, loving the concise and easy to understand instructions :)
@MakeTestBattle9 жыл бұрын
Jangular Thanks! The next mod guide will be rather interesting; our mate is quite the character...!
@Jangular9 жыл бұрын
Looking forward to it then :)
@huangziwei27438 жыл бұрын
i cant even hear the motors revving of the boring stryfe
@daneemaddox71228 жыл бұрын
ikr
@thegamingonion99677 жыл бұрын
Huang Ziwei that's what I said
@TeddyNeonOfficial7 жыл бұрын
Huang Ziwei he used dummy batteries and double a batteries to make it sound wimpier
@seal36267 жыл бұрын
Cpt. Teddy No, it's a grey trigger Australian stryfe so it's weaker.
@redninjaproductions96828 жыл бұрын
0:02 Exactly why I don't like stock flywheels anymore.
@thegamingonion99677 жыл бұрын
RedNinja Productions you couldn't even hear it lol
@Mannnnnnnnnnnnnnnnnnnnnnnnnn7 жыл бұрын
RedNinja Productions same I f*** with the worker mods
@kenchow56958 жыл бұрын
The moment when a KZbin video taught me more than 1 year worth of science class😧😧
@thegamingonion99677 жыл бұрын
XyloCyClone - Playz lol
@not_an_undercover_cop8 жыл бұрын
Great tutorial. The part I love the most is the little tips you throw in. Knowing little things like the type of bit or that you should tin the wire first is so super helpful. Subbing for sure! Thanks!
@metalmathimans6 жыл бұрын
That was a real solid build tutorial with very clear description,hats off to you guys!
@UniverseGaming7927 жыл бұрын
I got all of these parts for Christmas this morning :D gonna make my own super stryfe!
@thegamingonion99677 жыл бұрын
Mark Bell same 😏
@t3rb0rg4 жыл бұрын
Well spoken, well instructed, and well demonstrated on the camera. This is an excellent video. Thank you for a guide well done.
@MakeTestBattle9 жыл бұрын
Blaze Pheonix Yes you can but those motor will die with a 3S LiPo. Use a 2S LiPo instead!
@chrisdudley60759 жыл бұрын
Do you have to use a lipo
@death_II8 жыл бұрын
+Make.Test.Battle can you use 2 180 motors?
@AEtherGhost1368 жыл бұрын
+Make.Test.Battle Stop having a boring stryfe, stop having a boring life.
@Boomtendo4tw8 жыл бұрын
why not go with 9000S?
@sirspastic33368 жыл бұрын
what about 9001S the power level, ITS OVER 9000!!!!
@cpthornman9 жыл бұрын
I don't Nerf but I'm subbing anyway. As someone who flies and builds RC planes I can appreciate this kind of stuff. Great video.
@MakeTestBattle9 жыл бұрын
cpthornman Excellent! We are really trying to make our videos appeal to more than just Nerfer's. The soldering skills and techniques are pretty universal! I have the parts for a micro FPV quad on my desk for sometime now so maybe you'll see something a bit closer to your interests soon!
@The_53rd8 жыл бұрын
31fps? Wow I truly didn't realise the aussie spec stryfes were that low!
@lukamic17767 жыл бұрын
They dont even sell them in australia any more
@BugIronOnHerHip7 жыл бұрын
The 53rd yeah my stock stryfe shoots around 70 fps
@xtrdltknyr5 жыл бұрын
Meter per second
@codyc.49718 жыл бұрын
Thanks for the guide and references to parts! I got my now-upgraded Stryfe up and running thanks to you!
@MakeTestBattle8 жыл бұрын
:D This is the type of comment I love reading! Glad I could help! -R
@alexmylonas29547 жыл бұрын
i know im ment to use a 3s lipo ryan but i did this mod with hell cats and im running 3 li ion batteries,but my flywheels are making different sounds when i tilt it and i think im burning the motors,can i plz have some help
@Eshiay8 жыл бұрын
Ordered two modulus for $30 from Amazon (without attachment) because it was cheaper than the Stryfe ($15 vs $20). My plan is to mod 1 so that I can give the other to my unsuspecting friend. Will try to make the rev as loud as possible so he knows whats coming.
@user-qu7co3ol8g6 жыл бұрын
Haha
@ghastgamer36046 жыл бұрын
Stryfe r still smaller and have cooler kit like fullauto or select fire and kriss vector, cage... Modulus just abigger stryfe anyway
@citadelic64247 жыл бұрын
I followed your vid and did this myself and it turned out great! I painted it white, gold, silver, and it works fantastic thx so much.
@tanksniper3806 жыл бұрын
Man this was so helpful and stopped we tearing my hair out. I now have the ultimate kriss vector stryfe now to wreck my friends. Thanks mtb
@FeuerToifel8 жыл бұрын
very good mod-guide. this guide can be used for nearly any semi-automatic flywheelblaster. for those, who don't want or have new motors or want to stay on the "LARP-safe" side of nerfing, a 2S lipo is just fine.
@Sandalhatt8 жыл бұрын
FeuerToifel
@jensensmitherman32008 жыл бұрын
This is literally a step by step guide to make a Nerf Murder Weapon.
@nerfmodder47626 жыл бұрын
fangs suck
@littlebiglsteele41586 жыл бұрын
false, fangs are great
@beanieteamie74355 жыл бұрын
@@nickwiehl1672 The Fang motors aren't my favourite. I'd rather use Krakens.
@Cringemoment40454 жыл бұрын
@@beanieteamie7435 switch the cage as well
@beanieteamie74354 жыл бұрын
@@Cringemoment4045 Well, yes?
@Digit95OxO7 жыл бұрын
Hey dudes. Used this guide along with two MTB rhinos. Stryfe turned out great. Awesome guide to use. Really happy with the results. Waiting for a worker battery door. My lipo is a. Bit too big. Cheers
@davidb.cloutier76969 жыл бұрын
Thank you for your great videos, they're very well made and clear visually, it help the new nerf addicts to mod their own .blaster,
@mackalrath9 жыл бұрын
you guys are amazing. incredibly thorough and funny.coop is good, but im sure in no time you will COMPLETELY surpass him. you guys are AWESOME!!! I love it! keep it up.
@MakeTestBattle9 жыл бұрын
theLonelyOne022 Thanks! Its an honour to be compared to the greats. Baby steps for now! -R
@CjNerf6 жыл бұрын
Hey MTB thanks for this video it is awesome ! any chance i could ask you for a favor i need to pick up a good lipo charger and power supply the link you have in the video gets a 404 error message could you provide me with a proper link when you get a minute, i don't want my house to burn down LOL
@alecpace21568 жыл бұрын
Im about halfway through makeing it. MTB makes it look SO EASY! Thx for the tip of 2s lipo instead of 3
@MakeTestBattle8 жыл бұрын
+Alec Pace Practice makes perfect! Hope it all goes soothly -R
@milkrun23709 жыл бұрын
I don't use LiPos. I use LiPotatos
@potatoguy96248 жыл бұрын
This offensive
@isntalex8 жыл бұрын
+Potato Guy shouldn't that be a compliment? Like bruh
@krisnava21108 жыл бұрын
+Potato Guy That offended me because my gender is LiPotatoes. I'M SO TRIGGERED!!!
@Mannnnnnnnnnnnnnnnnnnnnnnnnn7 жыл бұрын
Same I just replace the lipo with a lipotato
@bartnoordkamp96536 жыл бұрын
Just a dude i uwe lilpump :)
@Br0dyz3r08 жыл бұрын
found you through a Reddit post, this is one of the most professional guides for anything I've seen.
@MakeTestBattle8 жыл бұрын
Thanks! -R
@Sonicwaffleproductions8 жыл бұрын
I don't know if this is a stupid question, but is it possible to make un-motorized nerf gun motorized? like the longshot?
@MakeTestBattle8 жыл бұрын
Sure, you could just hack out all the parts from a stryfe and put them in a longshot. Might take some work to make it look pretty -$
@Sonicwaffleproductions8 жыл бұрын
Make.Test.Battle ok thanks!
@simonsaldana90243 жыл бұрын
5 years old and still the perfect video to get my cousin started on modding
@thegoathead75388 жыл бұрын
This is boring... THIS IS EXCITING!!!!!
@Caslu19868 жыл бұрын
Just finished modding my stryfe following this. Works amazingly!! Cheers guys!! Keep up the good work!!
@MakeTestBattle8 жыл бұрын
:D This is the feedback I love hearing! -R
@untrust20336 жыл бұрын
DONT CUT LIPO CONNECTING WIRES AT THE SAME TIME111111111111
@beanieteamie74355 жыл бұрын
NO SHIT
@koopertrooper70085 жыл бұрын
Forgot to press shift lol
@XavierMorrisYT2 жыл бұрын
That intro was the funniest thing ever
@abigailchurcher268 жыл бұрын
Are stryfes still being sold in Australia I haven't seen one in ages i need to do this mod now and I am not spending 70-80 dollars on a modules or demolisher
@isntalex8 жыл бұрын
Buy it online then
@abigailchurcher268 жыл бұрын
O.G.alex my parents won't let me and seeing as I can't get a job because I am too young I can't
@alexmylonas29547 жыл бұрын
look on gum tree if u live in australia that is where i get mine from
@olliet61176 жыл бұрын
And I searched up all things u need for this mod and it costs $72.21 and that’s not including the tools u need
@Bean416 жыл бұрын
Amazon, if y’all have that. I’m not sure.
@ned10338 жыл бұрын
Awesome mod really hard and if someone managed to get that all down hats off to them nice mod guide!👍 lots of intricate thingys
@jackwang55448 жыл бұрын
0:04 and also loud af
@Mac-tw3zu8 жыл бұрын
Lol
@dharmaboy757 жыл бұрын
In the process of doing this right now. All i can say is, get a good soldering iron. makes life so much easier. The cheap off the shelf ones dont last long or the tips become useless. I am at a halt right now till I get a new iron.
@Chiovarie8 жыл бұрын
im gonna make a straven out of this :D
@alecpace21568 жыл бұрын
It's spelled strayven👌🏻
@thegamingonion99677 жыл бұрын
Alec Pace chill the frank out bra
@mattvonnerf34956 жыл бұрын
It would be sacrilege to defile a Rayven in such a way, it should be made illegal!
@theasianrepairer6975 жыл бұрын
Nerf relased Rayvenfires. But there kohl's exclusives. *WHY NERF, WHY?*
@celes64029 жыл бұрын
Wow I can't wait to get all the parts i ordered to do this mod guide thanks for a really clear mod guide!
@MakeTestBattle9 жыл бұрын
Notulaz Thank you! You shouldn't have any troubles with the electrical items but stay tuned for info about the motors... we have something really big just around the corner! -R
@luka65759 жыл бұрын
Make.Test.Battle Umm I cant find any falcon moters do you have any other suggestions?
@neg4t1vezer047 жыл бұрын
Blaster (stryfe): around 35 USD Motors (MTB Rhino): around 90 USD LiPo bat pack: around 8 USD LiPo charger: I don't really know this because the link doesn't work. If you can give me a price and a link I would really appreciate it. Charger power supply: same as above Microswitch [ WS 10X Microswitch 15A V-156-1C25 pin plunger snap action (SPDT Micro Switch) XV]: around 5 USD 18AWG Silicone Wire: around 1 USD 4mm heat shrink: around 1USD XT-60 male plugs: around 2USD Total: around 145 USD
@MakeTestBattle7 жыл бұрын
Rhino motors are NOT $90 USD dude. They are like $5 depending on the seller and currency. Containment Crew: www.containmentcrew.com/product-category/mtb/
@schlongdas72506 жыл бұрын
90 dollars rhinos ok liberal
@schlongdas72506 жыл бұрын
Stryfes are 20 lol
@danielpreilly772 жыл бұрын
excellent demo, thanks for the soldering tips
@SnoopDoggyDoge9 жыл бұрын
Great in depth video as always Ryan and MTB. Time to reference this to noobs
@travelingspartan20357 жыл бұрын
Dunno if they existed when this vid was made, but a metal FWC and flywheels, from Artifact if not Dr. Snikkas, is also highly recommended for the noise reduction alone.
@MakeTestBattle7 жыл бұрын
This guide was made way before metal flywheel cages were avaliable and yes I 100% recommend one. The Artifact cage is a good lower cost alternative -R
@shannonmcfarland69827 жыл бұрын
Worked so well if you have any problems ask me
@w3stgeorge1177 жыл бұрын
Shannon McFarland were can you buy the lipo charger and power
@shadowsa2b6 жыл бұрын
why on earth do you have hanging on your wall a cut down Rapid Strike with a barrel extension and collapsible stock on it? isnt that what it essentially started out as? that aside, this is an excellent step by step demonstation and walk through of the build process
@momo.ru-kun6 жыл бұрын
You could use the wire stripper to cut the middle of the wire by bending the wire, no need for the knife. Easier and cleaner
@xxflashwingvsfivejellexx45609 жыл бұрын
I like the super stryfe can wait to see you guys in Melbourne
@Bleenga9 жыл бұрын
Great video! Very informative tutorial. Keep up the good work.
@Cornelius4298 жыл бұрын
This was an excellent video, thanks guys.
@MakeTestBattle8 жыл бұрын
Gewd luck dude. Linked us when you're done. :3
@toaditoad16563 жыл бұрын
The Lilo Plug in the diagram is not on the Right side, the rounded side is the negative and the flat side is the positive. Watch the video like ten times and never noticed that little mistake. But still a very good video.
@fitter20008 жыл бұрын
Good video apart from the battery doesnt seem to fit into the compartment perhaps they have changed the thickness slightly ?
@Cody-Blues7 жыл бұрын
Great video.... getting ready to do a couple of these and this was very helpful.
@ThatSmashGuy3 жыл бұрын
I know this was made 5 years ago so you probably wont see this but do these mods work in the nerf ghost ops evader?
@Genex19728 жыл бұрын
I'd like to see you mod a Rayven. I like the way the blaster looks and when modded I would imagine it be cool. I'm already working on doing this mod to 2 of my Stryfes.
@prathhitsaxena38868 жыл бұрын
just did my first mod, this guy is a genius.
@princecarmelodeluna11765 жыл бұрын
This made me stryfe super strong long time for me around 2/3hours to find the pieces
@leonzaccagnini82559 жыл бұрын
cool vid! What exciting videos should i expect next?
@MakeTestBattle9 жыл бұрын
Leon Zaccagnini We have a few things in the catalogue: A singled sledgefire and a AJ tripleshot are the next modding guides. Then there is some fun HPA stuff that should be done soon. We also have a stack of war and HvZ footage to go through.
@garrettpatterson41439 жыл бұрын
Make a range test video please also love you guys channel keep up the good work
@MakeTestBattle9 жыл бұрын
Garrett Patterson Thinking about it. We may have just found a very large indoor space that we can use whenever we need to do accurate testing in.
@sebcastro32037 жыл бұрын
Lol My science teacher told me that this video just taught half of my learning this month😂
@WoodmanFFM7 жыл бұрын
Regarding the trigger microswitch: Why not just throw in a MOSFET? You could place it virtually anywhere that is convenient and keep the original mircoswitch in place. Far easier. Plus, even the most resilient microswitches won't be able to withstand the current draw of the motors for a long time.
@MakeTestBattle7 жыл бұрын
Because thats a magic cube that can break. Its a trait of my training as an engineer; I am distrusting of things I don't fully understand and MOSFETs currently fall in that category. I will probably do a video on them at some point -R
@WoodmanFFM7 жыл бұрын
I think you really might want to learn about them then. After you get to know MOSFETs you'll ask yourself why you ever put up with the hassle of replacing wimpy microswitches with slightly less wimpy microswitches for handling currents of several amps.
@joellcurtis2718 жыл бұрын
I was modding my recon and it broke but then a couple of days later I was mucking around and disovered that the plunger components could become a blaster by themself
@JustInTime05259 жыл бұрын
What was that bit you were using at 3:05? Looks like it's made for flush cutting, but I have never seen one before. Overall this is the best stryfe mod tutorial I seen, and I would love if you guys upload more often!!!
@MakeTestBattle9 жыл бұрын
+NERF870525 Thanks! Both Justin and I have been overseas the last month so we haven't been able to do any editing or filming! -R
@theshibalover5 жыл бұрын
Do you solder the wires on top of the motor nobs or to the side
@brownthunder5098 жыл бұрын
loving the intro! XD
@Cuyl_9 жыл бұрын
Nice mod can't wait to try it myself
@plazma28919 жыл бұрын
Radi Aityahia good luck all these motors are discontinued brush motors are obsolete if you fins some get as meny as you can
@MakeTestBattle9 жыл бұрын
george arnold Sadly yeah; we are working on locating a new source of the motors or potentially getting a large batch made up.
@mackalrath9 жыл бұрын
lol i cant find how to reply on my iphone... i hope you guys read this though. i just watched coops newest video, and im SOOO glad i did! it was really nice of you guys to lend him that. and the shout out is going to make you channel EXPLODE!! i hope nobodys near when it does though.... that would hurt. i love this channel and i hope you guys can keep up with the thousands of subscribers youll be getting 😝😝😝😝😝😝
@MakeTestBattle9 жыл бұрын
theLonelyOne022 Read and appreciated! It was a huge stroke of luck and we are really excited to see where we can take our channel! -R
@smoadia858 жыл бұрын
Recently we found someone on Taobao selling a mechanism that convert the Stryfe to auto fire. Maybe you guys can try it in your next video.
@MakeTestBattle8 жыл бұрын
+Jeremiah Sam I think PskySG is planning on sending one of them to us... I eagerly await it and will buy 10 if they are decent! -R
@xtrem54285 жыл бұрын
I know it's just a toy and not an aircraft, but I couldn't help but think how that soldering work was REALLY not up to the standards I've learned. Thanks for the guide tho, it's really well made.
@mhayes613 жыл бұрын
Yes everyone has these items
@bladexplays20073 жыл бұрын
3:05 How to remove that plastic part if anyone don't have that tool ?? I also not have that tool ???
@yeakid40297 жыл бұрын
Excellent guide once again. Could you or others tell me if a 70x34x22mm lipo would fit instead of the 71x35x19mm lipo being used here? Keep up the Great video's...
@cynthius16556 жыл бұрын
I had a problem. When I put the flywheel cage back together, the top of the flywheel sliced up against the inside of the flywheel cage, and spat out dust
@Stacey_-bf2mb2 жыл бұрын
Best video I’ve seen. I’m trying to lipo mod my stryfe with two krakens, and a 950 mah 3s. Would I be able to add the worker ful auto kit on top of this mod? You guys have another video where you add the full auto kit but I’m not educated enough in flywheel circuitry to fully understand yet 😅
@us2runknown5424 жыл бұрын
Too bad I cannot do this as i do not have access to those specific tools and i am not willing to buy them. Anyone have a solution for me to obtain a modded stryfe?
@maximo48.4 жыл бұрын
Us2rUnknown idk bro
@MelvinFung4 жыл бұрын
Im using 3s lipo but what awg should i use?
@ThePaperkrain6 жыл бұрын
Hey man, nice meeting you @ Zedtown: Last Haven Dec 2017 :) Wanted to bring my Stryfe, but I modded it, so had to buy a stock regulator for the event. Any chance of you doing a Regulator Modification guide some time in the future?
@bunndyboy4 жыл бұрын
Hey Ryan. What your favorite modded nerf gun. Rapid strike? love you very detailed vids mate
@justnerfin59896 жыл бұрын
I’m confused. Was the red wire supposed to represent the positive or negative? I saw the one red wire connecting to the positive of the male XT60 connecter and I only saw one red wire going from the battery directly to the motors and two black wires connecting the battery to the common port and the normally open port to the motors.
@piercecarkeet58957 жыл бұрын
This video got me into modding!!
@MakeTestBattle7 жыл бұрын
Glad to hear. -Justin
@georgefraggelakis91616 жыл бұрын
Tnx for explaining every step
@tystell5358 жыл бұрын
I just recieved a nerf stryfe off eBay and it was modified but u think the motors burnt out
@jrthe3rd8218 жыл бұрын
Doing this mod with Dr. Snikkhas' Flywheels Cage!!
@JosephPostsStuff7 жыл бұрын
thanks for the good video but the website with the charging componets are sold out :(
@wolfakatsuki40275 жыл бұрын
Good guide but most of the stuff is not available anymore from your link
@kycubes422 жыл бұрын
i like how he made a monster of a weapon in under 10 minutes
@pcharlie36267 жыл бұрын
i tried this but after i opened the gun all the pieces fell out so i bought a new one but it happened again, and i had to keep geting new ones and ended up spending hundreds of dollars on stryfes. i finally gave up and went back to using my barricade
@Boygamer03126 жыл бұрын
thanks make. test. battle. i just bought a pair of neo rhino motors earlier today. (sat. Jan 20 2018)
@Cringemoment40454 жыл бұрын
Buy an ofp cage and high crush wheels and get 140-150
@rynohart72146 жыл бұрын
Very educational, thankyou!!
@Tarlac48489 жыл бұрын
Can you show us how to mod and get more darts for a long shot
@Finnbauman7 жыл бұрын
I used the product link for the LiPo and did everything exactly the same as you. I even went back through the video. No matter what I do, the LiPo will not fit in the battery tray. How do I fix this? Please respond as soon as possible.
@GamingAviators8 жыл бұрын
Is that the only lipo charger you could use
@DoitForTheLolz17 жыл бұрын
One thing I'm not certain about with modding flywheel blasters (since I don't know anything about electrical lol) is if you need to re-solder anything if you just take out the thermistor, or can you simply clip it out and put better batteries in for a quick upgrade?
@RaeshHaze7 жыл бұрын
Would this work in a Reyven too? I did it to my stryfe and was very impressed and I love my reyven, but because its the original its so pathetic I cant use it effectively so I was just wondering.
@neilsandwich74238 жыл бұрын
What Dremel are you guys using? I'm looking to buy myself a Dremel because right now I'm borrowing my dad's
@K3fnet6 жыл бұрын
very detailed very nice
@AAron-qz2ok6 жыл бұрын
If i follow this tutorial mod for my only stryfe will it last forever or is there a breaking point
@emmett_m7 жыл бұрын
If I don't use a micro-switch or new motors can i just use a lipo with stock motors and such, or will it burn out the motor/break the micro-switch?
@calciumdirector66898 жыл бұрын
The intro is 6 seconds, I want this to be a vine. NOW.
@NonsenseSystems6 жыл бұрын
I kinda have a fear for lipos. What do i do about that?