Making a Batch of Tail Spinner Baits

  Рет қаралды 94,902

Marling Baits

Marling Baits

Күн бұрын

Пікірлер: 156
@albo_gator5265
@albo_gator5265 6 жыл бұрын
You just keep getting better and better with each lure. Thank you for sharing your knowledge. Can't wait for the next one.
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@johnhanks7782
@johnhanks7782 6 жыл бұрын
You do fine work , here’s something you should do ...make a lure of a baby platypus.
@scottleggejr
@scottleggejr 5 жыл бұрын
It's fascinating to hear all of the things you listen to while you're making these baits. I feel like the most important thing you listen to is probably the heater.
@jdelao99
@jdelao99 4 жыл бұрын
That's the most Beautiful lure I've ever seen!! This is easily my favorite channel on KZbin
@ashermorales8276
@ashermorales8276 6 жыл бұрын
My goodness another one from the lure guru. Man every material you have makes an essential part of every lure
@Rinconbass
@Rinconbass 6 жыл бұрын
You are an artist, what a hand you have!!! Congratulations!!!
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@pikemanify
@pikemanify 6 жыл бұрын
Nice Working Music ( Metallica ) and a nice bait to 😀
@calebcarroll857
@calebcarroll857 6 жыл бұрын
This is something I have always wanted to do. I think I am going to actually try it out. I made some simple crank bait bodies out of pine once and I think I may tinker with those to start! Thanks for the inspiration!
@mikeschultz6383
@mikeschultz6383 6 жыл бұрын
That’s a beautiful workshop you have very impressive work and interesting on how much it takes to make an high quality fishing lure
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@s1ckn4s31
@s1ckn4s31 6 жыл бұрын
I live in Finland So cant go fishing of the ice So i just do these for the summer thanks a lot wish you a great day
@marlingbaits
@marlingbaits 6 жыл бұрын
Awesome thank you!
@cattienfishing2228
@cattienfishing2228 6 жыл бұрын
Thank you for making these videos really meaningful, wish you health and success
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you very much!
@Miguel.herrera.71
@Miguel.herrera.71 6 жыл бұрын
Another masterpiece! Great craftsmanship as always!!!! Love the colors.
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@bigseanSM
@bigseanSM 6 жыл бұрын
These lures look great, I'd definitely catch pike with these, your hard work and artistry is amazing, thanks for sharing 👍
@marlingbaits
@marlingbaits 6 жыл бұрын
Awesome thank you!
@ddhale190
@ddhale190 6 жыл бұрын
Best lure making show on KZbin!
@gilbertobernalgamboa4400
@gilbertobernalgamboa4400 4 жыл бұрын
Hola yo tengo tiempo siguiendo tu buen trabajo y e fabricado algunos como tú los haces yo soy de Mexicali baja California saludos y felicidades por tu gran trabajo.
@Sharingan112
@Sharingan112 6 жыл бұрын
These videos give me life! Keep up the good work! May have to modify some of my hardbaits after seeing that spinner action 👍
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you that’s awesome to hear!
@americanmade2896
@americanmade2896 6 жыл бұрын
You should definitely make some fishing videos with the lures you make, would be super awesome to see.
@БоянКалчев
@БоянКалчев 6 жыл бұрын
Respect !!! Best regards from Bulgaria.
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@TrensdePesca
@TrensdePesca 6 жыл бұрын
Trens de Pesca - Brasil - Parabéns pelo trabalho de alto nível!
@ozenfant_ozn
@ozenfant_ozn 6 жыл бұрын
your lures are awesome! as are your vids. thanks for sharing.
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@TommyEvans12
@TommyEvans12 6 жыл бұрын
Dude I hope you make millions. You deserve it. And where can I buy one of those.
@JohnThomas-nn6qt
@JohnThomas-nn6qt 3 жыл бұрын
try making some "sand crab" baits for catching fish in the pacific ocean, targeting surf perch and striped bass....
@steventhomas7504
@steventhomas7504 6 жыл бұрын
Another great lure and video. Thanks for making the videos. What combination pump and chamber is that, is that required for the HS3 silicone.
@shuggiemcg1
@shuggiemcg1 6 жыл бұрын
Amazing work yet again thanks for sharing
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@marcinwozniacki5707
@marcinwozniacki5707 6 жыл бұрын
Beautiful lure, greetings from Poland
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@FriedEggsMegee
@FriedEggsMegee 6 жыл бұрын
Please get a set of exacto knifs. The small triangular blade i think it is #11 you can buy in packs of 100's. So when they go dull you can change them quickly. Your hand will appreciate the purchase in your detail carvings.
@jerrytiner3391
@jerrytiner3391 6 жыл бұрын
That's excellent work, great job
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@victor-manuel-pr
@victor-manuel-pr 6 жыл бұрын
Nice lures you got talent !!
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@iantweedie4060
@iantweedie4060 6 жыл бұрын
Love the new videos and I have said it before but you dog is beautiful( mainly because looks almost exactly like mine)
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@askemarina3542
@askemarina3542 6 жыл бұрын
Incredible craftsmanship. I'm just starting to make lures and I'm wondering how to determine how much weight to add to a lure.. thanks!
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you! It depends on how bouyant the body is, and what sink rate you want, the amount and location of weight added is a very important step. It almost always trial and error, and you’ll wana take your time.
@breakintips9896
@breakintips9896 5 жыл бұрын
Hey boss! Could you reveal what that powder was that you mixed in with your 2 part resin? I noticed when I use the resin it has some surface bubbling and overall inconsistencies. Looks like when you used that powder it was silky smooth and didn’t require a bunch of sanding and looked great right out of the mold. Keep up the awesome work!
@jonah.h169
@jonah.h169 6 жыл бұрын
your dog is so cute
@123bhays
@123bhays 6 жыл бұрын
I was waiting for a big ol Muskie to come demolish that bait lol!
@zacharygay8733
@zacharygay8733 6 жыл бұрын
Great work as always. I’ve been getting into lure making myself and was wondering what size stainless wire you are using and where you order it from? Also the final coat you put on the lures, is that polyurethane as well or do you use glaze coat?
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you! I get my wire from ebay. They have a pretty good selection there. I’ll use anywhere from .041-.061” dia. S.S. wire. For the clear coat I’ll eithere use a 30 min. or envirotex lite depending on the lure
@thefishermanbuilder9605
@thefishermanbuilder9605 6 жыл бұрын
Good works! Congrats!
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@fishnfreak04
@fishnfreak04 6 жыл бұрын
WOW, that was amazing
@keumessie
@keumessie 6 жыл бұрын
Looks awesome
@JOBAHT
@JOBAHT 6 жыл бұрын
Beautiful bait. If you're still think how to make lippless bait try positioning ring just before its hunch (like on your drawing) much farther from its nose. And maybe you need to add more lead (weight). In my country there is a lot of people making them from bath (sealant) silicone and they are cheap (1,5-3€). And those lures much smaler than yours by body size are 20-30 grams heavy. Try to search word "glavinjara" on the internet to see how they look like.
@MeOnTube01
@MeOnTube01 6 жыл бұрын
Awesome lures you are making. Can you tell me what kind of wood you are using for your lures? Thanks.
@marlingbaits
@marlingbaits 6 жыл бұрын
For my wooden baits I normally use Poplar. The master blank of this lure was carved out of bass wood. Thank you!
@tn8141
@tn8141 6 жыл бұрын
a 1/8 inch bandsaw blade would do you wonders but a true Craftsman you do awesome work
@marlingbaits
@marlingbaits 6 жыл бұрын
Crazy I just got one of those.. just now lol
@marlingbaits
@marlingbaits 6 жыл бұрын
And thank you!
@tn8141
@tn8141 6 жыл бұрын
Where do you sell these at?
@kzookid2051
@kzookid2051 6 жыл бұрын
Great lure, thanks for sharing with us.
@johngreenwood2852
@johngreenwood2852 6 жыл бұрын
Another awesome lure!! What types of wood do you like to use for your baits?
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you! I use Poplar most of the time
@darrylb4048
@darrylb4048 6 жыл бұрын
You have an art there! You could start a teaching video (more in depth) and have oodles of viewers. Congrats
@naturalstateangle7893
@naturalstateangle7893 6 жыл бұрын
Wow Absolute Beauty! Great job! 👍👍
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you!
@michaelporterfield9081
@michaelporterfield9081 6 жыл бұрын
Can I buy one of these in a bluegill bait??? That is a awesome bait!
@manularcher8436
@manularcher8436 6 жыл бұрын
Bravo à toi super vidéo beau travail
@vicolo7565
@vicolo7565 6 жыл бұрын
Love the videos mate, keep them coming ;) Which type of wood do you use for your baits?
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you and thanks for watching! I normally use Poplar, but I carved the master for this bait outa bass wood
@vicolo7565
@vicolo7565 6 жыл бұрын
It's a pretty light isn't ? I have only done few baits so far, have used oak and ceder. Any reason you prefer using poplar? What you do is more then just lure building it's art. Really getting in to carving so your videos has been a great help so far :) Thank you for the response
@marlingbaits
@marlingbaits 6 жыл бұрын
Thanks again, and yep Poplar isnt as light as Cedar, but its bouyance is still appropreate for lure making. I also like it cuz it carves very smooth.
@vicolo7565
@vicolo7565 6 жыл бұрын
Hmm may be il try it out, might be hard to find where i live tho. I do like both cedar and oak, but oak is pretty though to work with.
@undero85
@undero85 3 жыл бұрын
Hi. what kind of wood do you use in your work?
@DanielDiazSurfcasting
@DanielDiazSurfcasting 6 жыл бұрын
Beautiful
@hardtimetrucking8770
@hardtimetrucking8770 6 жыл бұрын
What is the best wire to use to make the loops?
@freeman1827
@freeman1827 6 жыл бұрын
Awsome baits and cute dog :D You are Master of making baits! What kind of paints did you used for the areograf? PS. Sorry for my english
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you! I use createx airbrush paint
@THGOklahoma
@THGOklahoma 4 жыл бұрын
What brand epoxy fo you use for your lures
@rubiomedina3727
@rubiomedina3727 6 жыл бұрын
Very good artist, you would care to tell me where you get the hemispheres for the eyes. Thanks in advance. greetings from Spain
@tylercombes6464
@tylercombes6464 6 жыл бұрын
Do you make all of your lures out of pine, very nice job on all the vids btw
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you! I use Poplar most of the time
@edgarburnett2115
@edgarburnett2115 6 жыл бұрын
Artistry.
@oso9734
@oso9734 6 жыл бұрын
Show seu trabalho 👏👏👏👏
@drumavenger83
@drumavenger83 6 жыл бұрын
Hell yea! Lure making WHILE LISTENING TO 'Tallica! \m/
@baddogcustommetal3577
@baddogcustommetal3577 6 жыл бұрын
Sweet! Is there a purpose for the groove you put on the forehead area of the lure?
@marlingbaits
@marlingbaits 6 жыл бұрын
Thanks! Yeah the blade on the back will pull a lot, and want to bring the bait up to the surface. The groove acts aginst that.
@baddogcustommetal3577
@baddogcustommetal3577 6 жыл бұрын
Marling Baits cool, thanks for the reply. Super impressed at the carving your able to do with just a utility knife! Keep the vids coming!
@j.j4379
@j.j4379 6 жыл бұрын
What kind of wire do you use
@colinmoon3351
@colinmoon3351 6 жыл бұрын
Do you sell the lures you make
@pebrito
@pebrito 6 жыл бұрын
Hi, wath wood you use in your baits? thx
@marlingbaits
@marlingbaits 6 жыл бұрын
I use Poplar most of the time.
@POWDERNPELLTS
@POWDERNPELLTS 6 жыл бұрын
Is there a specific type of wood/ material you use
@austinpresley6187
@austinpresley6187 6 жыл бұрын
KawaiCruzin 22 From his previous replies I've seen, it looks like he uses poplar. But I watched a newer video of his (chipmunk) & he used mahogany. I probably butchered the spelling
@crankbaitbaron7565
@crankbaitbaron7565 6 жыл бұрын
I would like to purchase 1 of these baits, where can I go to get one, or we could traid custom painted baits
@xiong2moua
@xiong2moua 6 жыл бұрын
Where can I purchase your lures? I need to add it to my lure collection.
@youzersef7441
@youzersef7441 6 жыл бұрын
What is the name of the yellow liquid that is flooded with wood before painting?
@jonathanclark6652
@jonathanclark6652 6 жыл бұрын
I'm pretty sure he uses sanding sealer
@zb6614
@zb6614 6 жыл бұрын
why chisel the waste away from the fins after you cut them out with the saw? why not cut back into it 90 degrees to the first cut with the saw and then sand?
@trevorcrawford183
@trevorcrawford183 6 жыл бұрын
Have you considered making large soft plastic swimbaits?
@marlingbaits
@marlingbaits 6 жыл бұрын
Yep I have before
@Fishingwithdave2024
@Fishingwithdave2024 5 жыл бұрын
I need that in my life
@mjk934
@mjk934 4 жыл бұрын
very nice
@ChillAquatics
@ChillAquatics 6 жыл бұрын
Nice lure! So did the thin carvings on the fins take a lot of practice? U make it look easy lol
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you! I still really need to take my time. The FF might make it look easy lol
@Arfabiscuit
@Arfabiscuit 6 жыл бұрын
When is enough enough never in your case thanks buddy .
@hectorcotron9427
@hectorcotron9427 6 жыл бұрын
What is the wood of your fishing lures
@marlingbaits
@marlingbaits 6 жыл бұрын
I use Poplar most of the time.
@hectorcotron9427
@hectorcotron9427 6 жыл бұрын
Thanks
@tonyslim4484
@tonyslim4484 6 жыл бұрын
Please tell me you'll have more available soon?
@marlingbaits
@marlingbaits 6 жыл бұрын
I’ll have more available soon. 😁
@2312garcia
@2312garcia 6 жыл бұрын
Buen trabajo mi amigo y como para poder comprar uno me gustaría comprar una en color rojo y negro el mismo estilo
@shainemaine1268
@shainemaine1268 2 жыл бұрын
I love the body shape, very rounded... much like the original Rattle-traps. (Which just SUCK now! Idk what they started doing to those things, but there's barely any action. Used to be way better.)
@SuperKabookie
@SuperKabookie 6 жыл бұрын
I hope I can get one of these!
@marlingbaits
@marlingbaits 6 жыл бұрын
I’m painting the next batch right now!
6 жыл бұрын
C'est un truc de fou la qualité de ton travail tu en vend ? Sa m'intéresse l'ami
@lucasernst8932
@lucasernst8932 6 жыл бұрын
Il est pas français pour info mais regarde dans la description y'a un lien vers son site
6 жыл бұрын
Lucas Ernst merci pour l'infos 😉
@legavrechristophe1504
@legavrechristophe1504 6 жыл бұрын
Bonjour ce qu'elle bois que vous utilisé merci et bravo
@oso9734
@oso9734 6 жыл бұрын
Qual valor de uma isca dessas?
@gavinent115
@gavinent115 6 жыл бұрын
Call them “The Bladed Tail SwimCrank”
@jakeorr23
@jakeorr23 6 жыл бұрын
I want to see you make a spook or a Rover from river to sea.
@bktarch
@bktarch 6 жыл бұрын
you have a little too much free time living up north to carve a lure, a monster lure it is. that lure size is for catching a 6' shark.
@michaelperez9137
@michaelperez9137 6 жыл бұрын
That thing is super sexy!! Out of curiosity, how much would you sell those lures in particular for? Asking for a friend lol, I can see pike going ham on those dudes. Killer job bro!!
@marlingbaits
@marlingbaits 6 жыл бұрын
Thank you! These are $33. I’ll have another batch done before the end of the week
@l0chis1
@l0chis1 6 жыл бұрын
where can i buy one?
@marlingbaits
@marlingbaits 6 жыл бұрын
They’re all sold out, but I’ll come back to this bait and make another batch before spring.
@josereis2996
@josereis2996 6 жыл бұрын
How can by it?
@marlingbaits
@marlingbaits 6 жыл бұрын
At marlingbaits.com I’ll have more done and for sale by the end of the week.
@662eck
@662eck 6 жыл бұрын
Do you sell them???
@marlingbaits
@marlingbaits 6 жыл бұрын
Yep $33 each on my website. Sold out right now but I’ll have more done by the end of the week
@662eck
@662eck 6 жыл бұрын
Marling Baits I gotcha you Art Dejur`...
@victor-manuel-pr
@victor-manuel-pr 6 жыл бұрын
I want to buy one but the page says you sales all more info please!
@marlingbaits
@marlingbaits 6 жыл бұрын
They all sold out in a couple hours. I’ll have another batch for sale by the end of the week.
@victor-manuel-pr
@victor-manuel-pr 6 жыл бұрын
Ok
@Anto-bv9ri
@Anto-bv9ri 6 жыл бұрын
👍
@bobmicks2190
@bobmicks2190 6 жыл бұрын
when are you going to make a whopper plopper type lure.. ?
@Kennnny77
@Kennnny77 6 жыл бұрын
But do they catch fish???? Let's see them catchin....
@marlingbaits
@marlingbaits 6 жыл бұрын
Gunna have to wait till the ice is off of my waters for that, but I have thought an awful lot about making fishing vlogs along with the lure making vidoes.
@EpIc_NaChO
@EpIc_NaChO 6 жыл бұрын
Marling Baits PLEASE DO!!
@iantweedie4060
@iantweedie4060 6 жыл бұрын
Marling Baits I agree it would be very interesting to see
@auggiebarboza5873
@auggiebarboza5873 4 жыл бұрын
KJ I ask the toothbrush guy if his caught also...I wood like to fish that 500$ lure!!!
@alexandredasilvaford6211
@alexandredasilvaford6211 6 жыл бұрын
👏👏👏👏👏show
@АскарНургалиев-ъ9е
@АскарНургалиев-ъ9е 6 жыл бұрын
Молодец
@Brunosilva-ee3ps
@Brunosilva-ee3ps 6 жыл бұрын
O mestre
@Виталий45-ь9х
@Виталий45-ь9х 6 жыл бұрын
👍🐠
@rebellion2121
@rebellion2121 6 жыл бұрын
aye I use the same real :)
@spencerskinn2049
@spencerskinn2049 6 жыл бұрын
Would I be Abel to pay you to make me a custom lure
@christopherrobinson9690
@christopherrobinson9690 5 жыл бұрын
How I support the channel if your out of stock! I could just give you money but... your doing what you love so I don’t want to cheapen it up like prostitution! This is a family show right?
@jessewheeler239
@jessewheeler239 5 жыл бұрын
Whopper plopper ?
@Hi_Kenneth
@Hi_Kenneth 6 жыл бұрын
루어가 참 멋있습니다. 건강은 챙기고 만드시길 바랍니다 최소한 마스크라도 하시길.
@janooar79
@janooar79 6 жыл бұрын
Thumb
@phddickbutt
@phddickbutt 6 жыл бұрын
Why didnt you talk in this video
Making a Crawdad Lure
23:35
Marling Baits
Рет қаралды 289 М.
Making a FireTiger JerkBait
20:12
Marling Baits
Рет қаралды 155 М.
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
FEAST: EAST
47:33
Landon George
Рет қаралды 10
Epitome of Pond Fishing | Making Little CrankBaits
21:19
Marling Baits
Рет қаралды 96 М.
Making Wooden CrankBaits
24:51
Marling Baits
Рет қаралды 194 М.
Lure Making a Tail Spinner Fishing Lure
13:47
TreysArt
Рет қаралды 30 М.
UnderSpin CrankBait | One Day Build to Catch
21:55
Marling Baits
Рет қаралды 297 М.
Hardware Store Bow and Arrow Build Challenge
18:54
Benjamin Stevens
Рет қаралды 430 М.
Making TopWater Rat SwimBaits
22:31
Marling Baits
Рет қаралды 237 М.
Will Fish Eat an Even Bigger Block of Wood?
17:54
Marling Baits
Рет қаралды 250 М.
How to • Pike fishing • Making a jerk bait • fishing tips
10:19
Wide Open Outdoor Film
Рет қаралды 11 М.
“The best fishing tool” should be known to every angler.
11:52
HOOK with knots
Рет қаралды 480 М.
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.