Jeremy Parr that was so awesome vid I never seen how colour prints were done before as I only learnt how to do black and white prints thank you for showing this video yours truly Jeremy Parr👍😁
@JamieMPhoto4 жыл бұрын
Definitely saving this on a playlist for my hopefully impending color printing adventure.
@ribsy4 жыл бұрын
Awesome! Looking forward to it
@billpickle28754 жыл бұрын
Man... I've only ever printed black and white but this method seems ideal. Outstanding colours. Dam I'm gonna have to try this
@ribsy4 жыл бұрын
Thanks! Yea you should def try it!
@andyvan569210 сағат бұрын
also what paper did you use, Ilford?, as not much is out there on wet printing colour, esp. papers, how the c/m/y controls are used to adjust colour, mostly they are used as per the Ilford paper instructions to replicate their contrast filters; so would be a good topic to elaborate on, esp. where did you get the print tank, plenty of options for negative tanks, but not much on print paper tanks.
@Мойдом-Алтай10 ай бұрын
You're cool! Inspired to switch to color! For now I only shoot with 4x5" black and white format film. Thank you I wish you success! Greetings from the Altai mountains!
@arturors304 жыл бұрын
I´ve seen it entirely. Great job!
@ribsy4 жыл бұрын
wow amazing! thanks 😊
@NatKellyFilms3 жыл бұрын
Watched the whole thing! Felt like it went fast, I just lost myself in your process. This is really cool, thanks for sharing 🙏
@ribsy3 жыл бұрын
Thanks for watching! Check out my course if you want more in-depth. It covers a lot 😀
@Pomdownunder2 жыл бұрын
Im a pom living in Adelaide, Australia. Love your site and the shirt .
@ribsy2 жыл бұрын
Thank you for watching!
@sparkoflight963 Жыл бұрын
Great video! As a beginner I would love to know more about the best equipment for sizing prints etc. Can you provide a list of all necessary equipment for getting photos on paper please! ❤
Very helpful and evidence that you have the patience to develop paper prints knowing that it takes some time and experimentation to get it right! :)
@ribsy4 жыл бұрын
Haha you def need patience for this 😅
@maximilliantaccoli49632 жыл бұрын
Hi i tried several times with the jobo 4531 with the quantities and times rotation you suggested temperatures all 38 celcius , but all the same resolute very faded prints i guess not enough time in the tube any suggestions?
@ribsy2 жыл бұрын
You either need to increase your enlarger exposure time or your chems are weak.
@vinyljunkie074 жыл бұрын
I've ventured into printing RA4 a couple of weeks back. Few things I found were I can do it at room temp (aprox 20/21c) and I just extend my dev and blix times (aprox 2 mins) I haven't found colour differences between processing them at the correct 35c or room temp. I also re-use the developer, usually the first 3 prints look good but after that blues will look more washed out (seems to be the first thing that goes) and the print will need more exposure/dev time. The best prints I always use fresh developer but for others I'm not too bothered and I can usually get at least 3 good prints with little to no difference from re-using a batch. I'd personally wear some eye protection just in case tho the amount of near misses it's just not worth the agro.
@ribsy4 жыл бұрын
Interesting. Yea, that’s what I been hearing as well. Extending the dev time can definitely work. But it can become a real big hassle during a long print sessions. Good way to save money tho 😃
@nw10photography4 жыл бұрын
I've enjoyed watching this. Thanks for sharing.
@ribsy4 жыл бұрын
Thanks for watching 😄
@KurtSk8tes2472 жыл бұрын
Hi there, I noticed you aren't using any color processor machine. I was under the impression this was necessary for color printing but maybe I could be wrong? Are there multiple ways to do so without using a machine?
@ribsy2 жыл бұрын
hey - a machine is def not necessary. look up a jobo drum for 8x10 sheets (or bigger)
@mpix191353 жыл бұрын
A projection print scale is useful. 4X5 test prints (large paper torn into pieces) and a small Ciba processing tube cut costs.
@ribsy3 жыл бұрын
Yea good call. I try to tear my paper as much as possible
@YoYoYo4 жыл бұрын
Beautiful print and enjoying video. Hope someday I will also have opportunity to print in color.
@ribsy4 жыл бұрын
thanks! you def can -- at least find a community darkroom to get you started the fastest way 😊
@mattiashaggstrom20494 жыл бұрын
I am impressed with your patience in making a color print. What chemicals and paper do you use?
@ribsy4 жыл бұрын
thanks. i use various different brands, i have no allegiance haha. RA4 currently is Adox. Paper is almost aways fuji crystal archive luster
@patrickcook30564 жыл бұрын
Excellent video, thanks. I really like the example photo too!
@ribsy4 жыл бұрын
Thanks for watching! 😃
@Raychristofer4 жыл бұрын
Bro this is legendary info here, you need to exchange that cap for a gold crown from now and and call yourself King Ribs. You don't hear me tho 😂
@ribsy4 жыл бұрын
Hahaha hilarious! Just tryna be helpful out here 😄
@chasethelight4 жыл бұрын
Just subscribed! Loving the content, and greetings from Vancouver, Canada!
@ribsy4 жыл бұрын
Thanks for watching 😄
@TAWPhotography3 жыл бұрын
Great video! I think I'm going to try this out now
@ribsy3 жыл бұрын
You def should!
@eriknelson63272 жыл бұрын
Thanks man, your videos are the best. I just got my first print ever done in my sketchy attic setup, which you showed me was possible.
@ribsy2 жыл бұрын
hell yea! keep on going 😊
@maximilliantaccoli49632 жыл бұрын
Hi grate shows very helpful !!
@ribsy2 жыл бұрын
you are welcome
@m00dawg4 жыл бұрын
That was super helpful! Really neat to watch and see how you can do it without going crazy with a JOBO processor and all that. Makes me want to try this out - I just need to figure out how to fix my sticking color head on my Beseler 67. Really appreciate the vid!
@ribsy4 жыл бұрын
for sure! that's what i love about this process. its easy to access with just a few tools.
@cmephoto13 жыл бұрын
My first reaction whhaaaatttttt kind of magic is this 😂. I’ve only ever used trays in my processing but this is a game changer. The only thing I don’t like about this process is like your picture that was too high in contrast if you were developing it in the trays you could see right away its too high and just toss it 😆 this way you have to be patient to see if you failed. Love your content though has inspired this oldy to think of new tricks!!
@ribsy3 жыл бұрын
haha yea this is color printing. fyi for color you cannot adjust contrast (without some funk experimentation) and you cannot "see" anything even if you use trays because it all has to be in the dark
@atroche19784 жыл бұрын
Man I thought you were alright until I see you rocking a Liverpool Jersey! 🤔🤔🤔🤔🤔 I might have to reconsider our KZbin friendship. Lol. Good video though. I was just wondering about this process. 😎👍 Just a few other things. What brand enlarger is that? How do you tweak colors? Maybe another video highlighting that. Thanks.
@ribsy4 жыл бұрын
I have a Meopta enlarger. It has colors built into it - you just turn the dials. More content coming + a full print guide PDF for sale 😄
@KurtSk8tes2472 жыл бұрын
Do you have any links to the drum you are using? As well as maybe links to chemicals and paper?
@ribsy2 жыл бұрын
no links, i got it on ebay. check here for chems and paper www.tetenaluk.com/ribsy-printing-guide?Ribsy%20Printing%20Guide
@ilichcastillo3 жыл бұрын
gracias bro. Mas videos como este please !
@ribsy3 жыл бұрын
Si! Viene mas por ahi
@aantonic2 жыл бұрын
hello Ribsy, yesterday i just did my first c41 film Portra 160 in 120 format. Today i did RA 4 . Everything was great, but i noticed Portra 160 has abit muted colors. Is that normal for that film? also exposure time was kinda short 3min f8, even through i shot at 100 and developed normaly- What you thing about prortra 160 colors?
@ribsy2 жыл бұрын
Portra 160 is def not my favorite
@CountDiLuna3 жыл бұрын
Brilliant, love it! I might need to start working towards my own DIY darkroom now :)
@ribsy3 жыл бұрын
Do it! Worth it
@astore37574 жыл бұрын
Great video. Thank you very much!
@ribsy4 жыл бұрын
Thanks 😀
@Blue_Newt_014 жыл бұрын
Wow. Never seen those tanks before. Much less chemical use than with the trays. Can you use them for B&W too? I’m going to look into them. Thanks for this feature!
@ribsy4 жыл бұрын
Yea they should work for BW. It’s just a game of “surface area”
@randallstewart1753 жыл бұрын
The height of popularity for at home color printing was around 1980. At that time, there were about half a dozen "print drums" for color printing being sold. My preference was the Cibachrome drums sold by Ilford. Cibachrome was far and away the most chemically brutal process at the time, so these were very well made. Unlike most, they can be completely disassembled, washed and dried for reuse in a few minutes. Others were made by Unicolor, Beseler, and Western. They are best used on a motorized roller base, which makes the processing completely uniform and even. I think he is using Jobo drums here - primitive by comparison.
@tuethuc3 жыл бұрын
thanks for the video, i think you are the only one who show the whole printing process. i print quite a lot on bnw, so i am more curious about how you set color to make color settings? are the color buttons there to make settings? 2nd quéstion: is BLIX fixer for color print?
@ribsy3 жыл бұрын
yea! i have some more content coming too!
@andyvan569210 сағат бұрын
hey, I just noticed you put the fixer into the bottle labelled DEV. ! so don't mix up the solutions and fix first 🙂
@erchata3 ай бұрын
Que buen video me ha encantado yo no revelo en color pero pienso revelar en color, veo que tienes la misma ampliadora que tengo yo, que objetivo utilizas yo tengo varios pero me gusta el MEOGON 50MM 2.8 para 135, da muy buena calidad gracias un saludo desde BARCELONA ESPAÑA
@ribsy3 ай бұрын
Muchas gracias
@marekmaje14263 жыл бұрын
Very nice video. I'm not sure about your burning tool, I've done this once using an old print, which is not totally lightproof and had some patterns printed. Since then I used black lightproof cards. I'm surprised you didn't have same issue.
@ribsy3 жыл бұрын
haha fair point. works well enough for me
@Resgerr4 жыл бұрын
Do you have to dry the Jobo tank out before each use?- as I remember doing this years ago at a place where they did photography ( were I actually learnt)and it was a pain also trying to get the paper in y to he retaining clips.
@ribsy4 жыл бұрын
nope! i simply rinse it to ensure no chems remain from the previous dev cycle. it can be water wet and that actually helps adhere the sheets paper when sliding them in, in the dark. 😊
@Resgerr4 жыл бұрын
@@ribsy 😮 so much better. Where I went we used Jobo tanks in the rolling machine and we had to make sure it was dry. So glad to hear that you don’t need to dry it out- thanks
@sudeep64ify4 жыл бұрын
This is the first time I have achieved a first in anything in my whole life :P
@ribsy4 жыл бұрын
hahahaha wel, congrats!! 😅
@lichtmaler3 жыл бұрын
fun video. So you don´t use a timer for exposure? Wouldn´t that make your life a bit easier? And no temperature control either? I like your approach. A color correction video would be nifty. But you probably have done that already.
@ribsy3 жыл бұрын
my old enlarger didnt have a timer so i just counted in my head. i have a much better one now with a timer. temp control can be useful but it hurts way less that most people think
@lennybenz42814 жыл бұрын
Bro thank you so much for this. So helpful. I've just bought a color enlarger for home. Would you be able to help me out with what the measurements are for chemicals and developer? Thank you!
@ribsy4 жыл бұрын
I usually use a shot of 100ML for a dev cycle. This will develop as much paper as you can fit in the jobo (the size that I have). So I try to stuff my jobo as much as I can while doing test prints
@sudeep64ify4 жыл бұрын
Great Video!
@ribsy4 жыл бұрын
thanks 😊 hope it wasn't too long
@sudeep64ify4 жыл бұрын
@@ribsy Not at all
@johnhough647011 ай бұрын
You mention that you do not take the temperage of the color developer. by not doing this it will affect the color and density of your prints. I had made my own color prints using a similar tube setup. also when the print is finished and washed, it appears blue until it is dry. I made many, many color prints this way over the years. It is so much easier and great quality to use an inkjet printer
@ribsy11 ай бұрын
Not monitoring temp will simply affect consistency across multiple prints. But you can definitely print successfully without monitoring temp as long as you provide enough development time
@redone26123 жыл бұрын
Once again great video sir, can I ask what your base settings were on your Meopta color 3 head? I've read something around 40 magenta, 50 yellow is a good place to start? Thanks again.
@ribsy3 жыл бұрын
Hmmm I don’t remember. I think actually something higher like 00 100 100
@redone26123 жыл бұрын
@@ribsy Ah thanks so much I'll see how it goes :)
@phillipcedoz55274 жыл бұрын
What do you set your yellow and magenta filters at to start?
@ribsy4 жыл бұрын
I do Cyan 00, Magenta 60, Yellow 50. If that looks super off then add 50 to each (not cyan)
@vladislavstanimirovic96504 жыл бұрын
Hey man, great videos so far! You've come just in time as I'm thinking of getting into the whole RA4 game! I too have a Meopta, an Opemus 5. Meopta enlargers are really well built and will last you a lifetime! I've been printing bw for a couple of months now, and l love it, I've basically stopped scanning my 120 films... 😁 I wanted to ask you about the Adox RA4 chemistry, particularly the developer, it states in the manual that you can develop about 115 sheets of 8*10, which would imply that you can reuse the developer, but l see that you discard it after every print. Have you tried reusing the developer?
@ribsy4 жыл бұрын
Hey! So it all depends. I haven’t had that type of success with reusing chems. You can approach it two ways: a) use small shots and discard. Or b) use a shot, then mix it back into the larger batch. And then pour a new shot. You keep doing that until you notice color shift or bad developing. I don’t do the re-mixing part because it would slow down my workflow substantially. However, perhaps you can squeeze your chemicals farther this way. Here is what other people say: www.reddit.com/r/Darkroom/comments/avzisw/reusing_ra4_chemistry/?
@Trinity57223 жыл бұрын
You have a lot of patience.
@ribsy3 жыл бұрын
Haha I guess so
@Trinity57223 жыл бұрын
@@ribsy I have been doing photography for a while. I'm seeking where I can use a traditional color processor. I see how you are processing with the equipment that you have.It's not conveient as a traditional lab (what can you do, but do something), but YOU WORKING IT! I may be in your position soon. I have to research these table top processors and do some more research on The JOBO. Thanks for sharing. I'm connected now. I'll review your vids!...Good Work!...KEEP GOING!
@Trinity57223 жыл бұрын
@@ribsy I'm going to end up purcahsing a Colenta or some print processor and have to purchase a small building and build a photo lab.
@TheRoss04114 жыл бұрын
You should probably wear some gloves while handling the chemicals, they are not exactly the safest
@ribsy4 жыл бұрын
yea point taken. i try to be careful but i do get a drip here and there. i should def wear goggles tho 😅