Making a Custom Ring For a Customer (Using his materials)

[@aaronamyx-lester6980]

@Patrick Adair Designs Thank you so much for the attention to detail on my ring and willing to work with some newer materials on my ring . the helpfulness in narrowing down my materials and what will work was very easy. the staff was communicative and easy going and highly recommend using them as i was thrilled to see my vision on this ring come to life.

[@carsondavis377]

Patrick: I have this little piece of alexandrite so I want to be very careful with it. Procedes to smash with a hammer

[@kylephelps9716]

I really want to get a custom ring made soon. I love watching these videos, alexandrite and meteorite are both gorgeous this ring is great, I'm again amazed at your work.

[@davidmifsudwismayer9519]

You should do a challenge with the whole team who can make the best ring only from 1 material

[@LaserGadgets]

Alexandrite is some cool stuff!

[@raheelkhattal2119]

Beautiful

[@dualprincesses9271]

After I started watching your videos, I knew I had to have one of your rings. The Halo spoke to me. I placed my order a week ago. Since it will replace my wedding band, I added some sand from the beach in Hawaii where we got married. You guys are going to incorporate that too!! Your rings are amazing. I will be a walking billboard for your rings! :)

[@Kellzea1]

Did your rings arrive? And are you pleased with them? Looking to order but worried about scams etc.

[@nelsonomekke492]

As always. Exceptional! I'll be sure to cue up for one.

[@toryutz6914]

I love purple heart. It's gorgeous

[@waynedchang]

Gorgeous work.

[@mihaleban1323]

Nobody: Patrick after he finishes a ring: I LOVE HOW IT TURNED OUT

[@PatrickAdairDesigns]

Lol it’s true

[@mihaleban1323]

@@PatrickAdairDesigns love your work 😊

[@linuxstreamer8910]

@@PatrickAdairDesigns at some point it became you catchphrase

[@cable7152]

I also love how it turned out, so not nobody

[@mihaleban1323]

@@cable7152 i also do but its 4 the meme : )

[@abrahammathew3135]

That’s a super cool design

[@komangpastrana8751]

Beautiful ring

[@leighanncronin6905]

Stunning ring Patrick!👍

[@etan838]

music goes absolutely batshit loud towards the end lmao

[@Kamodomon]

OMG yeah

[@sethmassacre]

We etch it in acid **blows my fucking ears out**

[@PaulH_1972]

Absolutely stunning 😍😍😍

[@cable7152]

A literal work of art

[@NathanRohr]

I found your channel only a couple of years ago. Though it will probably be awhile before I get married, it only took one video of yours for me to bookmark your site for when I need rings. Breath taking work. Please don't move your website! (Though if you had to I'm sure I'd see it on here)

[@Johnbro8]

Thanks for sharing your skills

[@everettsimonsen3048]

That ring really do be phouresing

[@Baskinrobi]

This is satisfying and relaxing

[@Johnbro8]

Beautiful work and truly unique

[@marino.mcecch]

Nice

[@zacharyjones7948]

Came here from an instagram ad! These videos are amazing!

[@PedanticMandi]

I just got the halo ring and it’s spectacular. I’m gonna need another ring REAL soon. Maybe something custom 🙂

[@alancalvillo6756]

Sweet Ring

[@summriver103]

That’s amazing!!

[@jackreeves3001]

Glad to see you. Very nice work. A very special ring. Thanks for sharing your amazing talent! KANSAS

[@r_aguilar68]

That's a beautiful ring.

[@rodrigor.castaneda3946]

Amazing bro I want one

[@Deerslyr81]

Yes another awesome video!

[@darthadewoody3844]

Beautiful rings and I am thinking about ordering myself and my boyfriend

[@Dronebertios_World]

Any tips on going about this? I would like some rings made with some tungsten that I have. Is it even feasible with tungsten?

[@PatrickAdairDesigns]

You totally can but you need some very strong equipment and bits to be able to machine it

[@АндрейС-ь4к]

what uv curable resin do you use?

[@BO0O0O0O0O0O01]

That’s amazing.

[@beniborukhov9436]

Looks pretty awesome. Would've liked to see it under UV at the end. I also like the idea having a greater variety of woods available as linings.

[@aaronamyx-lester6980]

I can send a pic of it with the uv light. The alexandrite glows bright red and the purple heart wood turns to a light tan. Something I didn't expect with the wood. I did want a different wood than the whiskey barrel wood that everyone offers. I am a wood worker and wanted something unique and beautiful and sent him a peice from my local hardwood supplier. he did a great job bringing out the finish of the wood.

[@ralphgibson3696]

Excellent ring and great workmanship. I assumed the Alexandrite would be a center piece stone until you crushed it. :-) My birthday's in June, so Alexandrite is my birth stone, and I know gem quality Alexandrite isn't inexpensive.

[@mistacheeze5366]

ok this is really cool! I'm gonna sub to you now xD

[@thomase907]

HOLY BLOWING OUT MY EAR DRUMS, BAT MAN!

[@lordmalice8368]

That's pretty sweet! How much something like that cost?

[@chadjackson5308]

Hey Patrick. I have a gold and silver necklace and some copper. If i supply the metal. How much for labor. Or can i add up the value of what i have and trade for something

[@archila9889]

what glue do you use?

[@Stev.3n]

Music seems a bit loud in some parts... Cool ring though.

[@JailbreakNation]

lord i came here to say the same thing it wasnt normalized

[@axiomatichumdrum8704]

How many years does the glow last?

[@danielg7351]

any reason to get a cut piece of alexandrite just to crush it up? or was it just the easiest to get

[@PatrickAdairDesigns]

Yep just cus it was easiest

[@aaronamyx-lester6980]

also cheaper. lab created stones come from the factory polished. you can literally buy a lab-gem on amazon for 50$

[@flanikent]

Ok guys I've watched a lot of your videos and I'm undecided on my own ring materials in need a tough ring like for a guy who works with his hands a lot! I'm leaning towards Damascus with some glow hidden in the ring any thoughts?

[@gustavgrobler117]

beautiful ring , when are you making something from super conductor again ?

[@johngangXW9JohnandAd]

This is awesome how do you learn this other than watching these videos?

[@nullsnaggle5198]

What is that red lathe you have called?

[@jameskennedy1077]

will you ever sell meteorite ring blanks cause i really love how the metal turns out

[@jameslegier3923]

I've tried a similar ring where I had wood inlaid in a damascus steel band, and when I etched it, I think I missed a portion of the inlay with CA glue, and the wood absorbed the acid and wouldn't let the CA cure. Is UV resin a better option when combining wood and either damascus or Meteorite that you plan to etch at the end? Thanks in advance!!

[@josephbooe7631]

I hope everyone has an amazing day!

[@thegoldenatlas753]

I love this design. I got deep space kit and a tungsten glow ring kit for gf and me, I didn't do a very good job on mine but I think she'll like hers. *Also y'all should setup a discord server, Facebook pages honestly sucks for community communication*

[@ronparcke-wms2146]

DiscordIsJustOK, but you really should lookIntoGabAndRumble. You dont haveToWorry about gettingDemonetised, nor yourFreeSpeech. Besides, ithose powered via the blockchain, too. And, please con.siderTelegram.

[@RedGuardian787]

Fourth comment! These rings rock! Meteorite rock to be specific lol

[@turbosquid1610]

You're so awesome

[@Kamodomon]

Do you have to make your own tools sometimes to make some rings or do you just buy them?

[@Jortedrunner]

Wow patty cakes, I forgot how dark you hair was there for a minute

[@アマ-d6n]

磨きの時に流してるのは水ですか？オイルですか？

[@djak19reaper]

Ngl, a small part of me died when you smashed that Alexandrite....still loved how it turned out!

[@kicksmartjumpstick9889]

Where to buy

[@swordstone5762]

roughly how long does it take you to make a ring?

[@bunnybunny100]

Sir wht is the price of this ring

[@xander7319]

In terms of rings, what is the most matte material available

[@PatrickAdairDesigns]

Sand blasted tungsten carbide is matte and also won’t scratch to reveal shiny material underneath. So if you want an extremely durable matte finish I’d recommend that 👍

[@hagenohea]

Generally, at what speed should epoxy resin be spun in a lathe to keep the heat from softening it?

[@godfatherog4204]

I could just imagine how much this cost ! Beautiful ring man keep it up

[@saketnarendra8864]

How much do such rings cost, I would love to have one

[@joshuagonzalez2594]

Couple hundred like 3-6 Some are even a thousand but worth it for all his work.

[@mesoed]

I love purple heart, but it does tend to lose it color rather quickly. I'm curious how well your resin helps with that.

[@XxNovaz]

I doubt it helps much, especially because UV light accelerates the color loss. You really need a UV resistant finish similar to make the color last.

[@aaronamyx-lester6980]

i had given patrick some info on the purpleheart wood i sent in. it can lose color after 7-10 years but being on the inside on my finger i wasnt as worried about the sun fading it. we had talked about different coatings that would help prevent the color loss. in the end, any special colored wood will fade naturally.

[@speef2379]

@@aaronamyx-lester6980 how much did the ring cost if you don’t mind me asking. I have a $1500 budget and want something custom

[@aaronamyx-lester6980]

@@speef2379 sorry i just saw this comment now. it was 2000 Because i asked for patrick to make a video. im sure it would be cheaper if the video wasnt requested. him and his staff was very easy to work with and he wasnt afraid of trying the different materials i.e. purple heartwood and alexandrite. im sure it would be easy to get a quote emailed if you had special materials in mind

[@subhanhomayoun1378]

Wooow

[@jasonhogan328]

Wish I had the talent and tools to make one. Wish I had the money to buy one!

[@TobiasDettinger]

13:54 do you want to kill our ears?! xD

[@NatsuDragneel021]

Cool idea, but I think there was too many materials used. Came out looking cluttered, over crowded, and too dark. A lot of the materials in the end become hidden and overshadowed by the excessive glow powders.

[@aaronamyx-lester6980]

I wont take offense to the comment but this was my ring. (I'm Aaron) I didn't want a super clean look. clean can look good but I liked the darkness and the weathered look like it has been through space getting beaten up and has a story to tell. its just like any relationship where there are stories to tell from the highs to the lows. in the end I didn't want flashy and only see the details when you see it up close. I do appreciate the level of detail and the friendliness of Patrick and his team to get the look. They do a fantastic job in communicating and working with you and even doing materials they never tired (purpleheart and alexandrite)

[@NatsuDragneel021]

@@aaronamyx-lester6980 thank you for the explanation. If you are happy with the ring, that is all that matters. Personally I would prefer something less cluttered, but your explanation makes perfect sense, for what you were going for. I hope you enjoy the ring. Also I agree that their attention to detail is top notch. They always try to give the client exactly what they want. If they hit your expectations perfectly, then I obviously can't fault them, because after all, it's exactly what you wanted.

[@TheGlorySaint]

Is it only me who is get this bad Audio at the End of the Video? For example 13:49

[@King_Lee_Brah]

Omg I forgot all about Alexandrite and I never knew about fire Opal. My Steven Universe knowledge has left me. I can't wait to get a Job that pays well so I can buy so many rings from you guys and hopefully I can get creative figure out what I want for a special request.

[@yamsam8980]

60 like! btw love your channel, i wish i could make stuff like that but i dont have the kit or such.yoir doing amzing things

[@azothdesigns]

All you need is a Dremel and some glue to get started on simple inlays with premade blanks ;)

[@ScienceNotFaith]

I have worked with wood for many years. I love purpleheart wood. It's so beautiful. BUT..... you need to know that it will turn brown with time and exposure to air and light. Nothing you can do about that. You can re-sand the surface to expose the purple again, but at some point, you can't continue doing that. Just so you know..... Oh, and sealing it won't help, light penetrates and the reaction still happens, turning the wood brown.

[@jordansnipes8069]

You should make a flash ring :)

[@jorock1122]

Can you make more wood and metal rings

[@parfecthelp7964]

How to bay this Meteorite pis ।

[@rednecknation3160]

When could you do another collaboration with Alex steele

[@OmnieStar]

I don't know if its just the material or what but if its not, your lathe needs a bit of work to stop the chatter and unwanted movement in the cross slide/tooling.

[@jesseedmands9631]

I hope to contact you later this year with a ring idea, I just need to save some money up 1st

[@HKSlapActual]

Holy shit at 13:47 had to turn the volume down. Fucking music got so loud 😂

[@ACloutToken]

I wish I was getting married so this could be my wedding ring

[@NightmareDW]

How come you don't tell us what chemicals you used at the end?

[@zayyalinnhtet7463]

I wanna a ring .I am rings crazy.

[@pirate_jacks]

the music went way up to loud it needs sorted !!

[@keonipereira5779]

Bro chose everything on his character customization 😭😭

[@williamhart4896]

That glow stuff is getting old Patrick for some designs I'd lose it and just inlay without the glow

[@RMoribayashi]

Music went so loud it distorted from the clipping at 13:48 and 14:16. Not good for the headphone crowd, ouch!

[@Kamodomon]

WARNING TO HEADPHONE USERS OR PEOPLE WITH SPEAKERS SET A BIT HIGHER THAN NORMAL! At 13:46 and14:10, the volume of the music (after stops speaking) gets super cranked up and could hurt hearing/damage speakers. Turn down your volume for these parts!!!

[@CorruptPotato]

They sell finger Trojans now?

[@katana24]

RIP speakers

[@thr.3899]

REKLAMY🤮🤮🤮🤮🤮🤮🤬🤬🤬🤬🤬💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩

[@major_trollum]

Just to make it clear, i admire your work, but the result as i can see it in the video looks kinda shoddy. Tho i am nowhere near a professional nor have insight in what the goal for some personal level "style" if there is one, but thats my honest opinnion. All feedback is good geedback and all that you know.. sorry! 😬👍 Edit: maybe as a sugestion, try using smaller gemstones and shake em around in a metal box or something to chip em around the edges for a more chaotic shape WITHOUT causing internal fracturing

[@I-Am-Blue]

Getting deafeningly loud might want to triple check before publishing

[@chraven69]

What the hell sort your sound levels out,

[@linuxstreamer8910]

Cyanoacrylate/ca also called superglue please just use it's normal name it does not make your videos less professional

[@j.joseph5353]

Please, do not use an apostrophe when it's unnecessary. it's = it is/it has and its = the possessive form of it Nitpicking can be fun! Thanks, Linux Streamer!

[@songfantasy670]

The finished product looks nothing like the thumbnail.

[@PatrickAdairDesigns]

It’s literally the exact same ring 🤔

[@aaronamyx-lester6980]

i can attest to that. my ring came out beautifully. studio lighting will always help of course.

[@BomberR6]

owwww volume warning for headphone users

[@jonathanhartfield533]

(Sigh) I’m getting tired of seeing glow in the dark rings, can you please make Masrani’s Amber Ring from Jurassic world?

[@CrazyMrTim]

He'll spare no expense