Making A Door For The Workshop

Door Lock
amzn.to/3yelBez
Door Hinges
amzn.to/41LP3Gq
Mortice Lock Video
kzbin.info/www/bejne/qoq9fp9matOpg6M
Hinge Jig Video
kzbin.info/www/bejne/m5S3kIdpp5V3aKc
Tools I use
www.badgerworkshop.com/toolsiuse
As an Amazon Associate I earn from qualifying purchases
Support me on Patreon
www.patreon.com/BadgerWorkshop
Support me with PayPal
paypal.me/badgerworkshop
🎧 WORKSHOP BANTER PODCAST 🎧
kzbin.info
Also available on Spotify, Apple, Google and most other podcast platforms
Social Media
badgerworkshop
badgerworkshop
www.badgerworkshop.com
Music from Uppbeat (free for Creators!):
uppbeat.io/t/sky-toes/delicate-daisies

[@Badgerworkshop]

Door Lock amzn.to/3yelBez Door Hinges amzn.to/41LP3Gq

[@Oscar-xj1xk]

The suspense is killing me. I can't wait for Matt to put the "Beware of the badgers" sign up again! Great series...

[@coisasemadeira]

Sorry Matt, but tha's just wrong.... A new door without a "Beware of Badgers" sign.... Have you got no shame man?😁😁😁 Great video! Looking forward to see the full workshop. All the best!

[@fredsmith6725]

I love how the cladding appears 3 minutes in 😂😂😂.

[@AMG63]

I'm totally confused with your comment ?

[@fredsmith6725]

@@AMG63 look at the video before and after the 3 minute mark. The wall cladding isn't there before, but is after 3 minutes. Matt obviously filmed the door progress much later.

[@veronica5896]

Now on to the next!

Matt! It will not be a finished door, or a workshop for that matter, without a proper ‘*beware of the badger*’ sign, like you had on shop doors before now. Other than that: lovely work! Also good to see some color, was wondering about that.

[@malcolmcoward7480]

Only danger is would a trophy hunter try to liberate it?

[@GingerPalletHunter]

Digging the slab foundation for my workshop and this series has been great! I've also made my own plywood door recently but used cheap CLS studs edge on to make a square frame. I used a grooving blade to cut a groove for the plywood and then put it together and screwed the frame tight. Looks great and much easier than arguing with the brace police if you make a slotted door 😅

[@garrypalmer5014]

Hi matt, Love the shed/workshop, just one thing as your door opens out wards, you might want to do is add a few hinge bolts to the hinge side of your door as it is easy to knock the pins out of the hinges and pull the door open,

[@rthomson1984]

Really enjoyed longer format. Workshop looking great

[@EvanDunville]

You should paint a brace on the inside of the door, for strength ha ha. The shop build is Looking good!

[@Amped-JDS]

The door was a nice idea but you need to install another piece of timber on the door to cover the gap from door to frame. This piece of timber will help stop the door pushing past the frame but more importantly cover the bolt on your lock. At the end of your video it was very easy to see where the lock was, a nice gap to get a pry bar in there if you want to gain access or the perfect spot for a grinder to slot in and cut the bolt off. Easy access to your shed then. Also invest in a set of hinge bolts. They cost under a fiver but will stop someone attacking your external hinges and gaining access.

[@iainrutherford184]

Fantastic. The new workshop is really taking shape. Love it!

[@Badgerworkshop]

Thank you

[@amhjoinery2060]

Perhaps if you made a door another time id put a rebate into the frame. As it is now you have a gap around the perimeter of the doors and rain will blow in or run into. You can also add draught proofing the the frame with a rebate to keep it warmer in there and keep the sound in. It’s also an idea to put a 9 degree angle on the sill of the frame to stop water pooling and running into the shed. A weather bar on the bottom edge of the door can also help prevent this which is a preventative step you could take now it’s built.

[@c.a.g.1977]

Oow, that woodshop is coming together nicely! Nice project, Matt! I think I'd have encountered the same "it is not a mistake it is a feature"-problem 😄

[@dan.w.hoover2556]

Great!

[@Pete.Ty1]

👍👍👍Thanks

[@andyc972]

Nicely done Matt, I particularly like the detail you added with the battens and that they more or less line up with alternate ridges of the cladding ! With that shallow pitch roof and the cladding it's looking a little like a shipping container build, and that's not a criticism - looks great !

[@Badgerworkshop]

Thank you

[@brayworkshop427]

Loved this series Matt. Looking forward to seeing you back in a proper workshop.

[@bobartex1812]

I like your hat 😂, seriously though you've done a brilliant job 👏

[@thesmallworkshopadventures7522]

Nice job of making the door, I loved your design features. I often look at Proper DIY also a great channel. Looking forward to the inside work. Take care Mark

[@torque8899]

Nice to see it coming together Badger! Gonna be a decent space.

[@deliaguzman1138]

This has been such an exciting journey! Can’t wait to see the inside!

[@WoodworkJourney]

Splendid stuff!

[@awantamta]

It's looking really good. I'm looking forward to seeing the inside being insulated and finished

[@triplex86]

You make it look easy and I know from building my own shed a few years back that it isn't, especially if you are working alone. That mortice lock went in like a dream. Looking forward to watching you work on the interior. Thank you.

[@David.M.]

Very nicely done. I am enjoying the workshop build, thanks

[@boydstongrove]

Great job, I really like the board and batten look on the door.

[@DocteGaby]

Awesome to see you walk in your new workshop at the end! Finally back to some normalcy

[@thomasmarliere2505]

Hey Matt, I hope you're doing well & have fun in your new workshop. Cheers :)

[@WoodenItBeNice]

Brilliant Matt. You explain things so well they are easily understood. Take care Matt. Cheers, Huw

[@Badgerworkshop]

Thank you

[@DaveGDesigns]

Enjoying this series of videos Matt you've done a great job

[@Badgerworkshop]

Thank you Dave

[@Jako-fh8zg]

Loving this series, the building looks great 👍👍👍👍

[@barryroberts6470]

Looks brilliant Matt you have done yourself proud with the building of this shed, don't forget to put up your Badger Sign before you finish. Stay Safe. Barry (Wirral)

[@gdbuilds]

Looking great Matt, looking forward to the finished space.

[@Badgerworkshop]

Thank you

[@paultay23]

Thats a mighty fine door to go with your fab new workshop Matt

[@SteveMonk1956]

I'm really enjoying this build Matt, lovely job and looking forward to the reveal. Well done Sir.

[@veronica5896]

The door cane out great! Strong, sturdy and beautiful! Thanks for sharing!

[@Badgerworkshop]

Thank you very much

[@dougsaunders8109]

Ollie’s (Bradshaw Joinery) hinge jig is genius. So simple it is ridiculous! Coming on mate. I have some workshop banter podcasts to catch up on now the six nations has finished and I am not binge listening rugby 🏉, 👍🏻

[@Badgerworkshop]

Yes it's a great jig

[@JerGoes]

Are the pins on the hinges not a vulnerability security wise? Loving the new workshop build.

[@neilfraser6646]

Yes he needs hinge bolts on outward opening doors

[@jtrent90]

we just put the latch cover on backwards and knife round it, bang on every time

[@sytemastudio]

Loving the beard-grow progress in the video, suits you well! And the teaser at the end was a nice touch, excited to see next episode. Will you be doing a tour of the new workshop once it all done and decorated?

[@bighig88]

Great video again Matt. I want to move so I can build my own workshop 😁

[@peterpaliwoda1527]

Fair play …you bring DIY to a new level…especially “Y” ….great watch

[@Badgerworkshop]

Thank you very much

[@FALCON390Workshop]

Exciting to see whole workshop done 🎉

[@leesmall7693]

Great workmanship throughout 👍👍👍

[@Badgerworkshop]

Thank you

[@eldoradocraftsman3733]

Have to say, that looks pretty dammed good. 👏🏾👏🏾

[@parrot340]

Will u do a full price brakedown? Would be very intrested to know how much its all cost. Thanks.

[@jantoregrytdal7240]

Love it, nice and neat job👍

[@mishafrolovdesign]

Great progress as always!

[@chilliking123]

Looks great. Can't wait to see the inside. Must be such a relief after spending the winter in that tent!

[@Badgerworkshop]

Yes a great relief

[@joelprinciple7519]

Badger, you make this build look easy! I noticed that you used ply wood to build the door and painted over it . Won't the ply swell up and get ruined by the rain or damp weather?

[@river4495]

such a nice result!

[@Badgerworkshop]

Thank you

[@Mastering3d]

Its looking good man well done Oh dont forget to hang the Badger workshop logo on the out side of the door ,

[@whaters]

Nice build Matt. Have you consider the security of the shed if you’re going to be storing tools in there? I’d recommend replacing those screws on the hinges, lock and frame with some longer/thicker ones as they’ll put up more resistance to attack. Any protection you can add to the hinges will also help as with a outward opener they are you weakest point. You may consider a multi locking strip further down the line which you can probably fit to that door retrospectively or a metal skin to protect the wood from attack.

[@martp197]

Looking great Matt, and some really useful tips. Cheers.

[@Badgerworkshop]

Thank you

[@cherylscott-baillie2858]

Just a joy to watch, happy Wednesday ❤

[@Badgerworkshop]

Thank you very much Cheryl

[@tomleiningerphoto]

Great job!

[@Badgerworkshop]

Thank you

[@anwolfs9804]

Very nice! Can't wait until I need a new shed for my workplace, I'll build it myself this time, just like yours! Can't wait to see what you'll do inside!

[@Badgerworkshop]

Thank you

[@pierreboone568]

Nice job.

[@Badgerworkshop]

Thank you

[@michaelplays2449]

Nice job Matt !! well done

[@Badgerworkshop]

Thank you

[@rubysmith3143]

looking good hun xx

[@Badgerworkshop]

Thank you Ruby

[@brianpatmore8418]

Hi Matt, Very nice work mate. You are definitely a happy chappy with the progress. Onya mate !!

[@Badgerworkshop]

Thanks Brian

[@Run_stevie]

Nice, like the longer format.

[@Badgerworkshop]

Thank you

[@geoffreycoan]

Its looking really good Matt, I bet you are much more satisfied at building this workshop than if you’d have bought one ready made. This is much more robust. And at 3:03, magic cladding appears all round the shed, oops, continuity error!

[@normanbott]

The door trim is perfect ! All you need is to attach the "Badger" plaque : I hope you saved it.

[@Badgerworkshop]

Thank you

[@Will_craig]

looking forwarding to seeing the rest You suit the beard looks good. best Will

[@Badgerworkshop]

Thank you

[@twist555]

Beards coming along 🤘

[@Badgerworkshop]

Thank you

[@lynjermey6423]

Great workshop for you, would also make a great garden bar 😉

[@Badgerworkshop]

Yes it would

[@stephenhall9592]

Good information and the blue looks great . Are the windows a security risk? As people will see what you are keeping in there thinking shutters will be good?

[@kz.irudimen]

You must be really happy about having a workshop again pretty soon ! Walls to screw things into ...

[@Badgerworkshop]

Yes I am

[@user-gf8hm5gw4k]

Correct me if I'm wrong Matt but shouldn't the vapour barrier be on the other side of door under the MDF sheet. Most of the moisture/water vapour is going to be created by you inside the workshop exacerbated further by any form of heating you may be using inside the workshop. Having the vapour barrier on the warm side will reduce the amount of moisture entering the insulation. Top job otherwise mate.

[@bobx2387]

Loving this Matt.. It is a grand job. Are you going to give us a lowdown on the trend cordless router? Bob (Weston super Mare)

[@KevinJohnsonist]

What particular screws do you use for the making the frames in the shed?

[@stephenthomas729]

Hi Matt what was the thickness of the ply you used for your door

[@MCsCreations]

Fantastic work, Matt! The shop is looking great! 😃 You only forgot about the little plate... "Beware of the Badger". Or did you leave it on the older shop? Anyway, stay safe there with your family! 🖖😊

[@Badgerworkshop]

Yes I need to find it

[@RunarMagnussen]

Great job! Hope you'll find the "Beware of the badgers" plaque. I'm curious, do you plan to have a way to lock or unlock the door from the inside?

[@Badgerworkshop]

Thank you

[@Absfor30]

Looking great Matt! Quick question, will you be doing anything about the door gap? Draught strips etc or are you using it as venting?

[@Badgerworkshop]

Yes I have added a door jamb

[@RalphAnderson7605]

What model is the hand held router you used for the hinges?

[@amandajoi8658]

Shouldn’t you have wrapped the door in tyvek? Or is marine ply?

[@stevesmall616]

What’s the tape you used between the mdf back of the door panel? Love the panel look

[@Badgerworkshop]

I will talk about that next week

[@chemcody5119]

How does the size of this shop compare to your last shop?

[@craiggingell295]

Good video Matt, but why didn't you hang the door on the left so it could be latched back against the front wall when fully open, rather than protrude past the corner of the workshop and obstruct the side access?

[@deankirk1008]

Great vid m8! I love the door build. What ply did you use for the outside, was it hardwood ply 3/4 inch?

[@Badgerworkshop]

Hardwood 12mm

[@paulwilliams6067]

Hi Matt, what's the total cost of whole project?

[@luc5543]

You're going to bake in that black thing this summer.. especially without opening windows. Good job, otherwise! :)

[@craftygriffo]

Just wondering how the door stays closed when you're inside. Do you plan to install a latch?

[@weltzy100]

Could add a yale p85 night latch as these can be reversed for outward opening doors. Would also add a bit more security. Love this door though!

[@truth3358]

Which size wood did ye use for the door frame ?

[@Badgerworkshop]

4 x 2

[@kenwhibley2493]

Hi Matt,,, barn paint have you used any colour other than black? Who makes Barn Paint?? I made a planter a year ago and the paint is used has not weathered well.. Barn Paint looks like it may be the answer.

[@richardhart7652]

Matt is that barn paint the same as bitumen?

[@Badgerworkshop]

No it is different stuff

[@szim71]

shouldn't vapour barrier be on the warm side of the door (inside the room, not behind the insulation. moisture which goes through the insulation won't have anywhere to go because of the vapour barrier you created)?

[@leekent7493]

Can I ask ?… why cut out the bottom sole plate from the frame then replace it with the door frame… why not leave it in place ?

[@Badgerworkshop]

It was not treaded wood and the frame protrudes

[@terristroh3965]

Hey, you got to make your first sawdust in your new shed! However,I have fallen into a devil-may-care attitude towards the alleged dangers of badgers. So has my dachshund. Surely the lack of a little sign on your workshop door has nothing to do with it. Right?

[@MrSnookerballs]

the last one I watched was you fitting cladding so why are they not in the right order as no cladding in this one

[@Badgerworkshop]

Did I not explain that?