Making A Fancy Leather Pancake Sheath For My Old Pocketknife - Leather Craft

[@KingdomGloryLeather]

What is the Gospel? 👉 kzbin.info/www/bejne/gZ6ui32uaqafjbs 👈

[@Bartofii95]

I can't stop watching your videos, I'm going to refer to you as the Leather Whisperer because the stuff you can do with leather is insane.

[@KingdomGloryLeather]

Haha thanks !

[@surfearth1]

I bought the stamps on your suggestion they are more pricey than most but man do they make clean beautiful patterns! Thanks for the suggestion. I am a definitely a new customer. No more wasting money on junk tools!

[@KingdomGloryLeather]

Awesome!

[@tammythomas108]

If you don't mind me asking, what stamps did you purchase. I have watched this video several times and I love it. But I would love to get the stamps that is used. I would greatly appreciate it if you could help me out with the stamp tool numbers.

[@benpriestman4015]

You have quickly become my favourite leathersmith on KZbin. Great work

[@KingdomGloryLeather]

Wow, thank you. I appreciate your support.

[@peterpagliaro1835]

I aspire to have a workshop like yours someday.

[@toddg6548]

Looks very nice. Didn't realize so much time was spent on the dyeing process. The center pattern highlight really pops. Tks!

[@KingdomGloryLeather]

Thank you. This particular technique does take a little bit of time but it looks cool. You can see the results better on the back side where there is less tooling.

[@atmiswilson278]

I am hooked. So therapeutic to watch a master craftsman at work

[@KingdomGloryLeather]

Thank you. I appreciate your support.

[@michaelrussell9890]

Cannot say it enough, beautiful work!!

[@KingdomGloryLeather]

Thank you very much!

[@danielespinoza2694]

I’m about to make my first one, thank you very much for this video!

[@KingdomGloryLeather]

Thank you for the support!

[@jacob1628]

Another excellent video! You have inspired me to try tooling on my next project. Thank you!

[@KingdomGloryLeather]

Awesome. Thanks

[@surfearth1]

Thank you!

[@shadow_crne1030]

That ginormus hole punch just isn't fair, mate........ DAMN!!

[@austinl7807]

Beautiful work, and you music selection for the videos is top notch!

[@KingdomGloryLeather]

Thank you. 😊

[@eileenmartha8377]

Amazing craftsmanship and wonderfully executed!💞💞💞

[@KingdomGloryLeather]

Thank you very much.

[@kendalvahle]

This dude is the greatest leather worker ever to exist

[@KingdomGloryLeather]

Thank you very much, but…no way.

[@patrickretsel7048]

Man your close up clarity is amazing…….nice videography the leather work is fantastic too….lol

[@KingdomGloryLeather]

Thank you for your support!

[@brotherBvideos]

holy smokes, that looks awesome, great craftsmanship

[@KingdomGloryLeather]

Thanks I appreciate it very much.

[@leeslegacywoodworking5405]

Beautiful work, as always!!!

[@KingdomGloryLeather]

Thank you 🙏

[@philochristos]

That sure is a nice looking sheath.

[@KingdomGloryLeather]

Thank you very much.

[@ItAintMeBabe99]

Beautiful workmanship !

[@KingdomGloryLeather]

Thank you very much.

[@MotoFr3ak2429]

Im speechless amazing work beautiful dyes fantastic job

[@KingdomGloryLeather]

Thank you so much 😊

[@semperfidelis4034]

A beautiful job, God Bless.

[@KingdomGloryLeather]

Thank you very much!

[@joshford7828]

Excellent work

[@KingdomGloryLeather]

Thank you very much!

[@surfearth1]

I’m impressed with the straightness of your diamond pattern. I guess the stick is a must as I can’t keep mine equidistant! LOL

[@KingdomGloryLeather]

Thank you. Yes, I always try to use a guide line to keep things straight.

[@Tandem-25]

@@KingdomGloryLeather do you have a “go to” spacing or does it vary? And, what spacing did you use here?

[@wulfschlueter2112]

Awesome work

[@KingdomGloryLeather]

Thank you very much!

[@LKS-1976]

Impeccable!

[@KingdomGloryLeather]

Thank you.

[@michaelfarmer2661]

good job looks great

[@KingdomGloryLeather]

Thank you very much!

[@steffenheinz3700]

Very nice work, art design!

[@KingdomGloryLeather]

Thank you very much.

[@rontaylor698]

Your work is so perfect. Can I ask what your line spacing measures. I haven’t been able to get the hang of it yet. You make it look super cool

[@KingdomGloryLeather]

Thank you very much! the spacing for the tooling pattern is 4mm.

[@scottdunn6308]

A wonderful Job!

[@KingdomGloryLeather]

Thank you very much!

[@tompatrick2583]

I was shopping the net to buy a scabbard just like this when I found this video. I have read the other comments and I see that you don't make them to sell...... VERY DISAPPOINTING for me. So, here is my question..... can you direct me to someone who can make one EXACTLY like this one but with basket weave and a Cross on the front? I cannot express deeply enough, EXACTLY like this! Too the exact high quality level of work of this one!! NOTHING LESS! GOD has given you a Very Special GIFT to be able to do this level of work that is for sure! If you can help it would be greatly appreciated! Thank you for Glorifying JESUS with your channel! Thank You!

[@KingdomGloryLeather]

Thank you very much. I’m not sure I know anyone who makes this exact pattern because it is one that I designed myself. But if you are able to find someone who can make you one feel free to have them copy it as much as they like. Again, thank you and I’m sorry I’m not able to help more.

[@victoryhandcraft]

Beautiful!

[@KingdomGloryLeather]

Thank you!!

[@jenniferbauman4802]

Good video. Great job. God bless. From Glenn CATT in Massachusetts.

[@KingdomGloryLeather]

Thank you very much!

[@ImaOkie]

Very nice !

[@KingdomGloryLeather]

Thank you very much!

[@haroldcotten1840]

I also put a cross on my leather work, because the Lord gave me that talentu👍

[@KingdomGloryLeather]

👍👍

[@Mwellmac]

That song is jammin

[@AnonYmous-ii4tc]

Very nice work. Thank you for sharing. After reading several of the comments below, I found answers to my questions too. Wonderful group.

[@KingdomGloryLeather]

Thank you. Your welcome.

[@ПавелСамарцев-к5л]

BOMBA!!!

[@javiermunos8754]

Muy bonito trabajo Amigo saludos! Quisiera saber, quiero aprender! Bendiciones!

[@delaCruzChaico]

Después de ver todo el proceso, ya me decidí....mejor me la compró hecha. 🤣

[@KingdomGloryLeather]

😂

[@rhodie33]

very nice

[@julioyamada115]

Brasil - 03.01.2022 - Espetacular, uma OBRA DE ARTE!!!

[@KingdomGloryLeather]

Thank you 🙏

[@ganapathigovindraj1041]

SUPER AMAIZENG

[@KingdomGloryLeather]

Thank you!

[@kennethking817]

I would really like to have one made for my Jumbo Trappers , I've looked and looked for a production model but no one makes one for the Jumbo Trapper .

[@KingdomGloryLeather]

Sorry I am currently not selling. I appreciate your interest.

[@TrebleForTheBass]

I couldn’t quite see the bottle, but are you using some sort of deglazer to fade the dye?

[@KingdomGloryLeather]

No deglazer, just regular Fiebing’s leather dye followed by Fiebing’s antique.

[@austinknowlton1783]

As someone who is interested in getting into leather work I picked up a few tips just from watching you. I like the dauber you made with the orange handled clamp, neat idea. One suggestion though; maybe slow down and show the labels a little more clearly? If someone is interested in learning this skill they are probably going to be interested in the products you use. I could even read the label on one bottle after three tries at half speed.

[@KingdomGloryLeather]

Thank you. I have a full list of all the tools and materials I use on this project in the video description for your convenience.

[@jimday6171]

Silly question from someone that is new leather crafting, would you flip the template over to make a left-handed sheath?? BTW, I'm learning so much from watching you and others of your skillset. Thanks for putting out wonderful content!

[@KingdomGloryLeather]

Thank you so much. The way these sheaths are made they can go on the left side of your body or the right side. It works either way. But if you have different designs on each side of the sheath you need to be mindful when making it that you put your show side design on the correct piece.

[@allanlavallee7171]

Really nice work. I have a question regarding wet forming and tooling leather. Do you tool before you wet form or wet form before you tool?

[@KingdomGloryLeather]

Thanks. In my experience if I’m doing any wet forming I usually don’t tool those particular pieces.

[@kathysanchez5945]

Very Nice...!!!

[@KingdomGloryLeather]

Thank you!

[@davidsloan9804]

You are a very fast sewer but your work is excellent 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@KingdomGloryLeather]

Thank you.

[@chetcole4258]

Thank you for your video, I have two questions? why did you put the tape on the back, and can you convert this pattern to make a single mag pouch. love this design thank you so much. chet

[@KingdomGloryLeather]

Thanks. The tape is to prevent the leather from stretching and deforming during the tooling process. As far as converting, I’m not sure.

[@grumpyshorts1056]

sweet, may I ask where you got the S723 Diamond Stamp? Searching did not turn up a result.

[@KingdomGloryLeather]

Proleathercarvers.com

[@rickingraham4451]

Great wok

[@rbeehner2]

pretty cool.

[@KingdomGloryLeather]

Thanks.

[@MotoFr3ak2429]

i need more dyes

[@Robpearceknives]

Great video. Subscribed.

[@KingdomGloryLeather]

Thanks for your support.

[@paulmartinez9908]

Too.satisfying when you use them nice KS Blades! What size are the blades/thread? Also..that dye job was the way it should be done! I Really can’t complain about anything bro, really clean job! Thanks new sub here

[@KingdomGloryLeather]

Thank you. Those are 4mm diamond tooth punches and the thread is 0.6mm Tiger Thread.

[@johnparker-tn1os]

I really enjoyed watching you work, but with all the time in making this work of art, what would you charge? I would think that there would be more time in the workthann in what the peace is worth.

[@KingdomGloryLeather]

Thanks. If I was to sell one like this, I would have to change around $50 to $70.

[@bobbyrosales2080]

What is the punch that you use to make the large holes for the belt

[@KingdomGloryLeather]

1-3/4” oval punch for C.S. Osborne

[@caleblandry1780]

Hey how does a pancake sheath hold onto the knife? Been wanting to make one but I live a active lifestyle

[@KingdomGloryLeather]

Extremely well.

[@powderpatchandball424]

The Osborne 1-3/4” punch, how hard is it to cut thru the leather. I just got one and I am having a hard time punching thru. It has been sharpened by the person who sold it to me. What is your table and base that you are using under the punch?

[@KingdomGloryLeather]

I use a rubber mallet and mine cuts through leather pretty easy. I have never really had any trouble punching through. I have a 1.5” thick piece of granite under my punching mat.

[@baustin11111]

This is beautiful. I was looking to see if you had a store I could order from?

[@KingdomGloryLeather]

Thank you. Sorry I do not, it is mostly a hobby for me. I appreciate your interest.

[@baustin11111]

@@KingdomGloryLeather No worries, I get it. I'm a woodworker and I only build things for me and my family. I'm Always looking to support those in the Kingdom. Sad I can't purchase your stuff, but looking forward to watching more videos. Thanks, God bless.

[@KingdomGloryLeather]

Thank you

[@Heidi0670]

Hello, very nice job. Dar I ask which leather glue do you use?

[@KingdomGloryLeather]

Hello. I use EcoWeld contact adhesive. Everything I use is listed in the description.

[@Heidi0670]

@@KingdomGloryLeather

[@ivanimports1961]

Muito lindo seu trabalho

[@KingdomGloryLeather]

Thank you 🙏

[@marvinpreston6698]

I'm fairly new to leather crafting, a few projects under my belt. As others I'm learning from you and others, my question is, why the tape?

[@KingdomGloryLeather]

Thank you. I get this question a lot. The tape keeps the leather from stretching and deforming while tooling. Once all the tooling is done you can take the tape off the backside.

[@alandrewgibson]

Nice!

[@KingdomGloryLeather]

Thanks!

[@flatdog-]

Thank you

[@mohammedbenni]

Hey man! Do you do custom holsters?

[@KingdomGloryLeather]

Sorry I am currently not selling. I appreciate your interest.

[@benjaminweill9475]

What are those flat applicators you use for dying the insides of the belt loops?

[@KingdomGloryLeather]

Don’t know what they are called. Found them on eBay but I can’t seem to find them again.

[@benjaminweill9475]

Cool. THANKS for trying. I love your videos

[@eggshellcarvingart]

super!

[@KingdomGloryLeather]

Thanks!

[@TheLuisraul]

Muy bonita funda.

[@KingdomGloryLeather]

Thank you.

[@Warrior-eo8kr]

Good morning, I hope you are well, I want to ask you something, how can I get something similar to what you use to put the small drops of tokonole?

[@KingdomGloryLeather]

Search for needle bottles on eBay.

[@Warrior-eo8kr]

@@KingdomGloryLeather Thank you 🫶

[@surfearth1]

Great video and fine leatherwork! Do you have links to the stamps? I can’t seem to find them on Weaver or Tandy. Thank you in advance.

[@KingdomGloryLeather]

Thank you. Try proleathercarvers.com/

[@surfearth1]

@@KingdomGloryLeather thank you and happy New Year!

[@KingdomGloryLeather]

Same to you.

[@surfearth1]

@@KingdomGloryLeather would you purchase the 4mm punches again or would you go with a different size? Just curious.

[@KingdomGloryLeather]

4mm is a good size for small goods. I have a cheaper set of 6mm irons I use for bags and larger projects.

[@jerrysantos1148]

What happened with the tape? Was it removed at some point or is it on the inside of the holster?

[@KingdomGloryLeather]

It was removed after tooling.

[@debmissenden]

Hi my name is Ian and you do excellent work. I am keen to get a hold of your template for this pocket knife sheath. Is this possible?

[@KingdomGloryLeather]

Thank you. I do not have a template available. But if you check out a link in the description to Don Gonzales, he has a video on how to make one.

[@petty1971]

Buen dia. Saludos desde ARGENTINA. Te pido si podrias nombras las herramientas que usas y los quimicos. Seria de gran ayuda para mi

[@KingdomGloryLeather]

Hola, todo lo que uso en ese proyecto se encuentra en la descripción del video. Espero que esto ayude.

[@BradyWindish19]

What Ounce of leather would be best for this kind of project?

[@KingdomGloryLeather]

4oz, around 1.5mm

[@christopherbboxie]

Where can I find those tools you are using

[@KingdomGloryLeather]

Try: Weaver Leather Supply, Tandy Leather, RM Leather Supply, Buckleguy, Pro Leather Carvers…etc.

[@eduardoexequielbalzarini1617]

Cómo se llama ese tipo de funda

[@KingdomGloryLeather]

Not sure.

[@rontaylor698]

What stamp are you using for the diamond pattern

[@KingdomGloryLeather]

#S723

[@chemclimber]

Do you take the packing tape off after you finish the tooling? Or is it just while you case the leather?

[@KingdomGloryLeather]

Take it off after tooling.

[@ullrgrowsean936]

I've never seen the tape method what's the point??

[@homeyv]

I have a question. I am using the same light brown you are but it is turning out very maroon. are you thining out your dye? or am i just over saturating the leather? my light brown looks like your dark chocolate.

[@KingdomGloryLeather]

Yes it is cut with alcohol 5 to 1. I put this information in the video description list, but I should have added that info in the video itself.

[@homeyv]

@@KingdomGloryLeather I should have read it ty

[@mikeford963]

Out of curiosity, what's with the packing tape on the back side?

[@KingdomGloryLeather]

Applying tape on the back of the leather before tooling prevents the leather from stretching and deforming.

[@mikeford963]

@@KingdomGloryLeather OH!!! That's an awesome tip!!! I'm just getting into leather craft myself. Made a few wallets and belts so far!!

[@tfildaed]

@@KingdomGloryLeather once the tape is removed, what is applied to that area, I assume its to seal the rough grain? Thank you.

[@javierarroyo3716]

En cuánto las ase compare con envío a México me interesa

[@KingdomGloryLeather]

Lo siento, actualmente no vendo. Gracias por su interés.

[@javierarroyo3716]

Gracias campeón

[@masonator71]

When did the tape come off?

[@KingdomGloryLeather]

After tooling.

[@DavidLopez-dr1eq]

Great job I’ve been wanting a nice leather holster for my 1911 with light in that style but every time I see one they aren’t made for lights and quality isn’t great

[@juliangonzales2916]

Saludos👍👍👍

[@garymaylon2025]

Why do you put packaging tape over the smooth surface and do you ever remove it. New leather worker who loves your work, but I am confused by the tape.

[@garymaylon2025]

I just read the answer in a reply to some one else who asked the same question. Thanks for sharing your experience and knowledge. God bless you.

[@KingdomGloryLeather]

Thanks. I put tape on the backside of the leather to help prevent it from stretching & deforming during the tooling process. One done and dry I remove the tape.

[@mirceasarcau6593]

Donde se puede comprar una funda en espania

[@KingdomGloryLeather]

Sorry I am currently not selling.

[@HonestDoubter]

What an amateur! He cuts and front and a back right away. Unlike pros like me who cut like 6 fronts before remembering to flip the danged pattern! ;). Well done!

[@manoloramirez6456]

What thread do you use and number

[@KingdomGloryLeather]

Everything I use can be found in the description.

[@oh_mjeed]

👏👏👏👏👏👏👏

[@KingdomGloryLeather]

😁

[@baciliozamora2552]

Pattern available for this project

[@KingdomGloryLeather]

Sorry no, but check the link in the video description to Don Gonzales. He shows how to make a pattern.

[@flagman45]

What oz leather

[@KingdomGloryLeather]

3-4oz

[@dannyquinto7842]

Where can I order one..?

[@KingdomGloryLeather]

Sorry I am currently not selling.

[@ricardogarcialozano5312]

¡¡¡CHAPÓ!!!

[@Nick-oq6bv]

Why do you tape the backs?

[@KingdomGloryLeather]

When you tool/stamp wet leather it can stretch and deform. The tape helps prevent the leather from stretching while tooling. When done tooling you take the tape off.

[@Nick-oq6bv]

@@KingdomGloryLeather thank you for the reply. That was very informative. I got some stamps for Christmas and I am looking for all the tips I can get!

[@АлександрКожин-т9я]

👍🔥🔥🔥💪💪💪

[@KingdomGloryLeather]

Thanks.

[@artakis40]

👋👋👋👋👋

[@KingdomGloryLeather]

👋

[@alphamale3643]

Can you sell me one?

[@KingdomGloryLeather]

Sorry I am currently not selling. I appreciate your interest.

[@tnniu7432]

Plees sir one wallet for me sir plees I'm big fan of u❤️❤️❤️❤️❤️😍😍😍😍😍🥰🥰🥰🥰 I'm form India.....🧡🧡💓💗💗💗

[@KingdomGloryLeather]

Thank you, sorry I'm currently not selling.

[@tnniu7432]

Plees sir❤️❤️❤️❤️

[@tnniu7432]

Not selling broo u gift for me plees❤️❤️❤️❤️💗🥰