Great tutorial. Thank you for your time and effort to make this video and share your knowledge with us. Greetings from Croatia.
@brianweekley57006 ай бұрын
Thank you. We will be visiting Croatia in September. We have heard it is a beautiful country and looking forward to it!
@mistergrendel32 Жыл бұрын
Very cool video! I too need a sawbuck to cut wood for a stove and use 16” cuts. What is the distance of the carriage bolt holes from the top end of the braces and how long are the braces? I think a three brace sawbuck would be fine for me, but better too large than too small? Thanks 😜
@telioty3 жыл бұрын
I found another post online with dimensions and "parts list", but would be nice to have here. What I'm thinking is 6n 8' 2"x4"; cut in half to 4'; 4n 5" 5/8 bolts, 8n 5/8 washers, 4n-8n 5/8 nuts (double nuts to prevent loosening apparently), 16n 3.5" deck screws. (using n after numbers for count to prevent confusion from too many numbers) 4n of the 8's become legs. 1n becoming the angle stop 1n becoming the bottom frame brace 4' long, and ending up being 3.6' tall when unfolded. For 60 degree feet with the ground, put the carriage bolts at 18" down. This will make the saw horse shorter at 3.46' unfolded.
@brianweekley57003 жыл бұрын
Yes, you can make this sawbuck with 6x 2x4x8's. Instead of double nuts, just use a nut with nylon insert. Good luck with yours--I find mine useful.
@mistergrendel32 Жыл бұрын
I like your idea.
@paulyanney31513 жыл бұрын
Thanks for idea! What angle do you cut the 2 sets of outside legs 45 degrees?
@brianweekley57003 жыл бұрын
Thanks. If you stop the video at 1 min and 22 sec, the angle of the legs is shown at the bottom (better to see how the angle is defined). Inside angle is 65 degrees.
@extrusiontooling95512 жыл бұрын
Thank you for the drawings. Help a lot
@brianweekley57002 жыл бұрын
My pleasure 😊
@ianvicedomini26485 жыл бұрын
That is a very nice sawbuck
@jaslyn1962 Жыл бұрын
Thanks for sharing
@brianweekley5700 Жыл бұрын
Thanks. Much appreciated.
@luffness41716 жыл бұрын
Great looking sawbuck! Congratulations. What are the angles of the bevel on the braces & teh corresponding angle of cut to make the legs flat to the ground please?
@brianweekley57006 жыл бұрын
Thank you! If you look at the bottom of the screen at 1:20 in the video, the angle between the leg and ground is shown as 65 degrees (but you only get a glimpse)!
@luffness41716 жыл бұрын
Thanks Brian; 'really helpful.
@truthseeker35122 жыл бұрын
Awesome video
@brianweekley57002 жыл бұрын
Thanks!
@patrickbaugh70354 жыл бұрын
Very good design and video, but Lord boy sharpen that saw!
@brianweekley57004 жыл бұрын
LOL. Yes, dad!
@AdeSwash5 жыл бұрын
Great idea, thanks
@cwgoforth5 жыл бұрын
Nice sawbuck! Thank you for sharing these builds with us. New subscriber here!