Making a FNAF Springtrap mask

“I always come back.” Springtrap, a man trapped in an animatronic. It seemed like a good hiding place for William Afton. Maybe it will save you from the animatronics as well. Just make sure you don’t break a sweat. It appears the suits don’t.. errr.. respond well to moisture.
DIY your own Springtrap mask! STL available on Cults:
cults3d.com/:1352922
🎵 I Got No Time - The Living Tombstone
#fnaf #springtrap #fivenightsatfreddys #3dprint #fnafmovie #3dprinting #fnafmask #3dprinting #3dmodeling

[@Rocky_da_dog]

How is this so underrated? You earned a like

[@allfnafstuff]

Thank you!🤗🤗

[@Cryingpuppy5929]

​@@allfnafstuffI always come back

[@supercindy8056]

You are so talented

[@Tofusproductions]

Could you make a full head version if Springtrap plz?

[@hex98]

Wow! This is amazing!

[@allfnafstuff]

Thank you! 😍

[@KaelynEggert-uz8ud]

Omg this is great!😃

[@tuxunil]

This is cool keep it up

[@dylanhudec979]

The last thing you need to worry about is your own springlocks going off on you

[@ST4RGAMR]

Super underrated!

[@ErikGI]

Five Nights At Freddy’s (FNAF movie). October 27, 2023

[@user-kk1mc3hx4o]

У тебя талант.

[@fordam-hu2zy]

Согл

[@Jerland_lover]

Underrated

[@allfnafstuff]

🖤🙏

[@Just_ilo]

Wow it fire 🔥

[@allfnafstuff]

Thank you!!🤩🤩

[@DuppyDuDe]

I like the Springbonnie mask

[@allfnafstuff]

Thanks!!😃🤩

[@TheweirdoXD]

Dang pretty good how long did it take + the 3d printing

[@allfnafstuff]

Sculpting probably took about 8-10 hrs. Printing the parts about 65 hrs, followed by a day of sanding, gluing, filling, etc and probably a full day of airbrushing and painting. Takes some hours but a mask like this is not too big to get demotivated and not finish it 😂 so I love that it's like a week long project! 😍

[@ElGeometricanoblanco19503]

**se acuesta** **Ve el armario** Parece que también hay algo ahi **Lanza bomba** Foxy:ahhhh, ayudaa

[@manuelgraboski]

Did you leave the printout somewhere for other people to do the same thing as springtrap? The impression

[@Wasted_VR]

So my aunt and uncle are taking me to meet Mathew Lilliard for my birthday and I want to make a Springbonnie, or springtrao cosplay before I got to meet him

[@Fazbear_flicks]

OK.

[@ACO11981]

Lol❤❤❤ so cool

[@EliaGamerYT]

I have a question....What 3d printer did u buy? :3

[@juliesauceda3507]

3d printing is very hard because it has supports and they are very hard to get off

[@allfnafstuff]

It's an Ender 3 V2, very affordable 🤩 and it never let's me down 😃

[@allfnafstuff]

@@juliesauceda3507 Supports can be tricky. That's why I designed these masks to be printed in parts. That minimizes the need for supports. A few supports come off quite easy and you always need to sand after PLA printing anyway 🤗 I hated waiting many hours for a big print I bought, just to ruin it immediately thanks to a huge amount of supports that would just NOT come off 😅 Printing fails like that motivated me to sculpt things myself though 😃 And I always keep my models as easily printable as possible. Hang in there, it will get easier 👊🏻🤗

[@thespringefton2254]

Это самые качественные маски которые я видел

[@user-pk3wz7yv9v]

Just a little bit of engineering, and yo ahh can make full head, with movable jaw or eyes, keep it up man!

[@allfnafstuff]

Thanks!! 🤗🤗 that would be so cooool

[@PizzaMan46]

Yo how much did that 3d printer cost and do you know the model bc I’m trying to save up for a 3d printer

[@nicovandermerwe8459]

I've purchased a few of your designs on Cults (including this one for my son). What are your settings for not getting stringing? I'm printing with a Ender 3 S1 Pro, print speed at 70 mm/s. (used your settings as shown on Cults).

[@allfnafstuff]

Hi Nico! Thanks so much for your purchase 🤩🙏 It's frustrating when a big print fails, I know 😑 This sounds like a printer issue. My settings are a suggestion based on an Ender 3 V2 so they might not apply to yours. You could check out this article for troubleshooting on stringing: all3dp.com/2/3d-print-stringing-easy-ways-to-prevent-it/ or ask S1 Pro users in a Facebook group for advice! I think they will gladly help you fix the problem 🤗 Hope that helps 🙏 Goodluck!

[@Pturtle42]

This is a help anybody

[@TheRealMonochrome]

which printer do you use? Can you release a tutorial on how to print put your mask?

[@allfnafstuff]

It's an Ender 3 V2! I'll see what I can do, I've never made a full length tutorial 😂🙈 That might be fun!

[@Jacobsvideos7564]

I will give u 100t of that!😂😂

[@SlayerEditzOffical]

Can I buy one pls

[@HuskyBuscuit29]

How much to buy one off you without the eyes? I’m trying to do a cosplay of William Afton ready for the fnaf movie and thought it’ll be good to have a mask of spring trap to go with it but I can’t find one anywhere and don’t have the materials to make one😭

[@allfnafstuff]

That would be awesome!!🤩🤩 But sorry, I don't sell the masks done, just the STL files. If 3D printing is not for you, you could consider downloading the files for $1.50, sending it to a 3D printing service and DIY the painting part 🤗🤗 cults3d.com/:1352922

[@HuskyBuscuit29]

@@allfnafstuff that’s fine. There’s actually a 3D printer in the college I’m at.

[@hakym2011]

What is the name of the background song of the video?

[@Fazbear_flicks]

I got no time living tombstone

[@schmerzwahnsinn4101]

dang man do you do commissions this is great!

[@allfnafstuff]

Heyyy tysm 🥰 No commissions right now, just making the 3D models available for people to DIY their own masks 🤗

[@schmerzwahnsinn4101]

@@allfnafstuff nice thank you so much for responding!

[@BroWhatTheHeck]

I want a 3d printer, but it’s sooo expensiveee!! And my parents say no all the time! Is it really that complecated with a 3d printer?

[@allfnafstuff]

Ender 3 V2 is a great printer to start with and it's not that expensive 🤗 And you can learn anything if you put in the work 😃👊🏻

[@BroWhatTheHeck]

@@allfnafstuff awesome and thanks for the info!😃

[@GoldAxoMC]

@@allfnafstuff bro tf the ender 3 v2 is so hard to use and always has random ass issues that take 6 hours to fix, i wouldn't buy one without getting the metal upgrade kit

[@JustDaVid802]

What 3D printer do you have?

[@allfnafstuff]

It's an Ender 3 V2 🤗

[@robloxman8944]

What’s your 3d printer

[@fake_Carl]

Does it grip?

[@DieNite]

how to get it?

[@sergioramosgoncalvessanche9571]

oops save, could you send me the time and the model for me to do here I can't find it anywhere

[@allfnafstuff]

Sure!🤗🤗 cults3d.com/en/design-collections/reparosai/five-nights-at-freddy-s

[@William_D._Afton]

Why are the ears so small?

[@Demoncat289]

Don’t get spring loaded

[@AshtonRowley-te1uc]

pls print the back

[@Eren.Jaeger16]

La vendes o podrías venderme otra?

[@arthurfernandescacapavasp31]

Caraca 🙀 eu vou querer uma pra não madar😅 né

[@decorarte6942]

Vc faz uma pra mim dar de presente ao meu netinho

[@R3gdoll_creative]

I can make cardboard mask but not enough cardboard

[@wiilane]

Vc vende ?

[@Eduard751_YT]

Así cualquiera😂

[@Paldaoffical]

Dont put the endosketleton you know What happed to william afton

[@allfnafstuff]

🫣😅😂

[@user-uu5yq3rn3v]

Come si chiama l' App

[@user-nh7vf6vk2y]

А заказать можно?❤❤❤

[@gabrielajuarez-nt2bi]

Can i have one plz it’s my birthday that’s what I want

[@Yousername1]

You should make and sell these, I would definitely buy

[@FazbearEntertainment414]

why cant you just make the whole head

[@allfnafstuff]

Who says I can't 😂

[@FazbearEntertainment414]

@@allfnafstuff no one

[@allfnafstuff]

@@FazbearEntertainment414 It's an easy print for most people with a 3D printer 🤗Whole heads can be tricky!

[@FazbearEntertainment414]

@@allfnafstuff true

[@arthurfernandescacapavasp31]

Do zuando