Making a japanese Kiridashi with Hamon

[@hickehelbro]

I have watched almost every kiridashi movie on KZbin and this is probably the most beautiful! Great work!

[@rvdKnives]

Thank you very much! That mady my day :)

[@williamsale7253]

At first I didn't think there was anything special about this blade but the level of detail

[@aaronmccann3246]

So much hand work. It's a beautiful piece!

[@rvdKnives]

Thank you very much!

[@jyw003]

Amazing work with simple tools! Great job!

[@unusualfabrication9937]

you don't have an angle grinder? tough. you deserve one and more subs

[@unusualfabrication9937]

oh wait nvm title says only with simple tools

[@rvdKnives]

I have one but as you said, only simple tools ;)

[@natemorton5575]

Great work as always! Thank you for using some good music but still keeping the background noise.

[@rvdKnives]

Thank you!

[@noveske.2236]

Nate Morton dunno why but I’d prefer no music and only the sounds of the tools

[@oddball0022]

@@noveske.2236 just preference I guess. I personally would prefer it like this, but then if I don't like the music they use I end up muting it.

[@yunusemrepekdemir5176]

so clean

[@rvdKnives]

Thank you

[@_OKAMI_9]

I enjoy watching your video simple and clean thank you !

[@rvdKnives]

Thank you! Glad you like it!

[@graff324]

Well done Sir!

[@Phandemonium1]

Such a talent!! Your work is beautiful. You deserve all the tools you need.

[@rvdKnives]

Thank you very very much!

[@lamproknives]

It looks really nice ! The hamon is really visible, I'm kind of jealous because when I etch my edge quenched blades it shows up well out of the ferric but as soon as I wipe the blade it disapears

[@rvdKnives]

I have the exact same problem. I don't know why it worked so well here. I just recently did a knife and the hamon dissapears ass soon as i wipe off the blade...

[@lamproknives]

@@rvdKnives try to do several baths, sometimes it works

[@ambroscustom]

Fantastic job done and scary sharp as well.

[@rvdKnives]

Thanks! Yes it is...Almost scares me to use

[@johnwhitehead4809]

very nice work and a great deal of patience! well done.

[@rvdKnives]

Thank you so much!

[@edisonsampaio3985]

Lindíssima lâmina! Trabalho de Mestre Cuteleiro. Parabéns! 👍🇧🇷

[@thomasdawson9486]

Nice job nice music nothing better

[@jlucas3flyb0y7]

Beautiful

[@AlcvinRyuzenRamos]

beautiful!

[@LeoSensei427]

Beautiful job!! Congratulations.

[@rvdKnives]

Thank you!

[@LivingCooper]

Beautiful knife! Awesome job & great video!

[@desnatao]

Very good job !! Lovely !!

[@pauloteodoro2415]

Muito bom , queria saber que líquido e aquele que você mergulhou a peça, obrigado pelo vídeo...

[@davidsegovia2397]

Nice work man cant wait for you next video

[@banditbeggers533]

That’s stunning

[@MrRUSSWILL]

That was phenomenal…. What kind off cordage did you use to wrap the handle thank you!

[@joeysampaolo8962]

Beautiful 👍🏼 good job

[@Eliel7230]

Beautifully done ! 😊

[@petrpavlosek5985]

Fantastic job!

[@2002Framer]

Really very beautiful. Thank you for sharing

[@Anmobgoccult20]

WONDERFUL, I have no words, always super perfect and unique precise product, wonderful work and video, well done and good luck, respect from old BG. p.s. It is a great pleasure for me to see that there are such precise people in the world, and that of the White race!!!

[@fredel2858]

Inpressing work id like to be such a good knife maker

[@starkote1366]

Beautiful! What clay did you use for harding? Thanks for aswer

[@HowlingWolfLeather]

Very very nice!

[@rvdKnives]

Thank you!

[@Erzfeind777]

Endlich mal wieder neues Video

[@jeffintoronto5712]

Really beautiful knife. I'm wondering though why you need to put relief cuts when you were cutting a straight edge on the handle?

[@kaboncho]

😍😍😍 good job

[@Белогоръ]

Отличное творчество,красавец нож!

[@Kentar0ka]

you made a left hand kiridashi ? but you use it with the right hand ?

[@momomohammed9108]

Great work thanks

[@BlindRambler]

Those “pins” would look awesome if you’d anodized them. Perhaps a nice contrast to the cordage you’re using. Just a thought. Awesome work.

[@rvdKnives]

Thank you :) Maybe I'll consider it the next time

[@bensdecoypoondummy1189]

What kind of metal were you using? It looked very soft and easy to cut & file. Is it stainless? Would the knife rust?

[@rvdKnives]

It's 1075 steel, so yes it will stain over time. However the finish is so high that it's not likely to rust if you keep it oiled

[@rottiejakeluke]

Do you know of a video showing the wrapping process? Thanks

[@antoniocpereira9360]

Parabéns. .. Lindo trabalho. ...

[@tomaszfilipiak4113]

Good job

[@rvdKnives]

Thank you :)

[@rottiejakeluke]

What ty0e of steeel was it? What temp & time did you set for the annealing process? Thanks

[@KillerFuzzOutdoors]

Nice job

[@caosblack83]

hermoso trabajo

[@catoush]

Awesome job thanks !!!!!!!!!

[@omiqran9858]

Amazing! How long did this take?

[@rvdKnives]

Thank you! Not so long. Around 10 hours of handwork in total

[@deaveedis6295]

Hello, I'm trying to dip my toe into knife making and i am curious about hamon, i read that it is to differentiate hardening, but why so?

[@move2fly]

Fantastic, just as we are used to from you. keep it up. machete next? ;)

[@rvdKnives]

Thank you! Maybe in the future :)

[@baer1204]

Ein wirklich Schönes Messer !!!!!! wie immer , weiter so meen jung Toll

[@rvdKnives]

Dankeschön! :)

[@latesvak]

Absolutely love the videos and knives. I just found your channel today. I am currently watching the mini karambit. I am in the kydex business and would love to give you some pointers to help you out if you are interested. Keep up the good work.

[@nicholashall7999]

Nice mate

[@skovbo65]

Why make a kiridashi for a left handed when you are right handed, that make no sense? But i really like it it is beautiful.

[@ahappypotato8340]

how to you know if its for right sided or left?

[@AlkalineLuke]

I never understood why one would make a traditional looking kiridashi, especially such a beautiful one as this, and in the end putting a secondary bevel on the edge... Isn't the whole point of single bevel knives (such as the kiridashi) to be easy to sharpen and attain extreme sharpness ?

[@MikeTheMaker1]

Lucas Kramer preach.

[@nicolaquintavalle2476]

Great ... Thank you for The video! What kind of Steel is? VG10?

[@rvdKnives]

It's all in the desciption ;) it's 1075

[@nicolaquintavalle2476]

@@rvdKnives Thank you! I did not see !

[@TheWoodWorkingPilot]

Beautiful! What fruit are you slicing there?

[@rvdKnives]

It's a plum ;)

[@ДмитрийМалхазов]

Super!

[@rvdKnives]

Danke!

[@hitely]

сколько по времени ушло на производство этого мессера?

[@Stasnislav_76]

Шикарно!!!

[@fredel2858]

Dude are you from swizerland?

[@juliantocristian3206]

whetstone grid ?

[@GAMINGHAZA]

Can i buy one

[@tigran1087]

Echte meester top video bro

[@СемёнИгоревич-р1р]

Что он наносит на нож перед закалкой?

[@davidlewis3042]

WOW I want one how do i get you to make me a few

[@rvdKnives]

It depends^^Do you want one or a few? ;)

[@samuelefabbri1307]

What kiridashi is used for?

[@rvdKnives]

For cutting stuff ;)

[@MikeTheMaker1]

Leather cutting and marking wood and other materials. It has a flat side so you can get flush to a work piece.

[@thomasdawson9486]

And hand tool only

[@espjason]

Please could you put up the template. J

[@torishefkiut8304]

You are selling this?

[@rvdKnives]

Yes I do

[@torishefkiut8304]

In internet?

[@rvdKnives]

@@torishefkiut8304 Contact me via email or instagram please

[@manuellingg1265]

Wann kommt das neue Video ?

[@rvdKnives]

in ca 2 bis 3 Wochen denk ich, vielleicht früher. Ich arbeite dran :)

[@manuellingg1265]

Ok Danke

[@rvdKnives]

Gerne! Sorry für die späte Antwort

[@manuellingg1265]

Macht doch nichts bei anderen KZbinr schreiben sie nie zurück

[@tomaszfilipiak4113]

Też bym chciał taki knife aim Poland

[@米白笠]

石器時代嗎?都用手工!電鑽沒拿出來前還以為用繩鋸哩!

[@clintlzhang4066]

附土烧刃

[@evil_Toad]

Я один увидел тут 2 разных ножа?(Могу пояснить)

[@bunker3493]

is this a jojo reference

[@matthewpeck4016]

I mean... you could at least have given credit to Steel and Soul for having watched his video before you did this.

[@عمرزايد-ه2ذ]

Mmunok

[@Leeland1984]

Hammer geile Arbeit