Making a Kashyyyk Clone Trooper Helmet

In this video I'll show you guys how to make your own Kashyyyk Clone Trooper Helmet!
To skip 3D Printing: 3:38
Files available here:
bit.ly/2MDfdFP
Raw Prints available here:
bit.ly/30chd00
Materials:
Filler Primer: amzn.to/2WE00qW
Spot Putty: bit.ly/3f7RXvq
Epoxy Putty: amzn.to/3c5HCjg
Filament Supplier: www.zyltech.com?aff=57
My recommended 3D Printer: bit.ly/2Y1MsrO
Use code GalacticArmory for 15% off your filament order!
Interact with me on Facebook: GalacticArmoryStore
Follow me on Instagram: @GalacticArmory

[@crashbot2762]

Hey can you do a sergeant hound helmet I think that would be cool.

[@and7thecandyman859]

I agree please do this!

[@sirschleck-alot2140]

Fuck yeah we need a Hound helmet

[@commanderthorn7525]

Yes

[@pilots1015]

Yes that would be a great helmet to do.

[@noahreimer8906]

Please do this

[@czarus3180]

I swear to god, im physically not able to do these helmets, but everytime I see you happy on the thumbnail i instantly click just to see you talk about something you love

[@TacticalBarista]

Just try! You can actually do it! I printed two halves of it already, you can also buy them from him!

[@candidobarbosa1909]

I haven’t even finished the video but I already know it’s gonna be great.

[@gonkdroid7207]

I'm making a commander gree helmet at home so I might make this one aswell

[@Loganhundred]

Me too, the chrome paint is drying right now

[@hopliteoperator]

How’s the project going so far ?

[@gonkdroid7207]

Mine is going well so far

[@ChevyYenko]

Which one phase one phase two or phase two kashyyk

[@gonkdroid7207]

Phase two

[@leoissad8971]

212th recon division trooper helmet

[@zachbishop6980]

YESSSS

[@crbrus6916]

omg yes!

[@AmgosrPig4384]

Yes

[@tomskowski6239]

Attack battalion*

[@leoissad8971]

@@tomskowski6239 the 212th recon division is a subsection of the 212th attack battalion seen on the second battle of geonosis

[@markgeorge2200]

I love this clone helmet...

[@BlatantlySwedishPGN]

Oh, yes! Galactic Armory back at it again. I always look forward to your videos, your work is amazing man! By the way, I'm waiting for my new 3D printer and I'm gonna start making helmets by your tutorials right away. So thank you for inspiring me on that!

[@andrewperrault5775]

Hey same! Which printer?

[@BlatantlySwedishPGN]

@@andrewperrault5775 I've ordered a Sidewinder X1 since it's the same size as the CR-10, giving me room for these large prints.

[@andrewperrault5775]

The Battlefrontier, nice, I went with the Prusa Mini, so I wil have to split them up more, but it seemed more reliable

[@BlatantlySwedishPGN]

@@andrewperrault5775 Yeah, it probably is. Prusa is a good choice, though they are a little expensive for me and don't have the build volume I want.

[@radionwave105]

When I look at where you started, it's absolutely amazing, the new intro is awesome the quality is getting better and better, the helmets are getting more and more awesome ! Great Job !

[@victorvazquez4876]

I just bought these files from his store and I’m currently working on my first 3D printed armor set! Cant thank this man enough!

[@ethanowens5086]

Nice! Thanks for these vids, it's a big help for my Mandalorian build! For the visor, I recommend Kalevala visors. They have lots of colors. They're also reflective, so nobody can see your eyes!

[@KDMandalorian]

Dude they just keep getting better

[@MrNoob-pb8jk]

You should do an imperial scout trooper helmet. It would be a cool addition, and it would be fresh, because nobody does those helmets

[@thomasb5647]

This makes me want to start 3d printing so much, but its so expenseive. I dream of making my own Clone armor

[@abrahamashley4146]

same

[@ryeguy7941]

Me too

[@stianbulandlie2711]

Heating the plastic visor with a heatgun makes it easy to bend

[@MichaelCasanovaMusic]

This is my all time favourite Clone Trooper armour

[@dwabbs]

dude, I bought a 3D printer after watching a bunch of your videos, best decision ever

[@FrozenHollowFox]

It's Purge Trooper time. Also these videos are a massive help. Thank you.

[@cysion9993]

Could you please do a tutorial on how to attach the ARC Trooper upgrades to phase 2 armour

[@joshc5339]

I use tin-snips to cut my visors, they are made for cutting thin metal and it works really well!

[@MrCreeperPS-vz2nh]

List of recommendations: 1. Phase I Captain Rex Helmet 2. Phase II 332nd/212th/501st Mashup Helmet (To symbolize the friendship of Ahsoka Tano, Obi-Wan Kenobi, and Anakin Skywalker.) 3. Phase II Coruscsaunt Guard Helmet

[@Liam-nv3zt]

Love your vids. I just finished a mando helmet, working on a full suit of CT armor now, all thanks to your videos.

[@PastaLuke]

I bet a dremel tool would have worked well for cutting that bugger visor!

[@turjaniczazsombor04]

Thank you so much! I am working on a 3d printed Shadow scout and this helps me a lot with the helmet

[@thebreadenjoyer6057]

I saw that umbra arc trooper helmet on the ground in the grass out side when you were sanding the helmet. I was worried that they were out of stock and would never return. I have almost earned $120 doing yard work so I can purchase that umbra helmet. I am so excited!

[@Mel-rf4jv]

Hello, galactic armory, i just wanna say your a big influence and i love your videos, keep going, and stay safe.

[@jacobrumelfanger1635]

I am so excited to start printing!

[@blitz_2666]

Looks awesome can't wait to try and make it

[@sharpesabre2423]

Another great video! I have been using your files to print out my own clone armor. Thank you for the inspiration to work on this project.

[@mangofandango2845]

Working on an entire arc trooper jesse suit using your files. Man you are great.

[@yab6806]

Looks great!

[@edwardrecord5305]

Ive gotta say, amazing build. It's also really refreshing to hear people talk about how anyone can make things and not gatepost things. Anyways, great job :)

[@granola661]

Awesome 👍🥰 Just got mine printed and assembled couple of weeks ago! Thanks to your files ❤️

[@tomswain6975]

I think a death trooper would be a cool one to make and the painting should be quite quick as it's mostly black. Love your work! 👍

[@shando-bacanday7149]

You know this guy is the man, he never fails like you watch other people doing this and they tell you everything you don’t have and like stuff that is ridiculous expensive but this dude makes things simple and makes some of the best helmets ever.

[@De_chavez_custom]

Beautiful 42st recon helmet!!!

[@paullinn1405]

You could use a Dremel with a cut off wheel with a little drum sander they were excellent For cutting out hearts especially thick plastic like your visor.

[@DonjacobyCreations]

Man you're videos are awesome, I recently got a 3d printer and have been using your method for some Halo helmets, and currently a mandalorian suit. I also have gotten several of your files from your site which are great! Keep up the good work, a keep making clone wars gear!

[@lukewarman2248]

The camo paint looks very cool, I am still waiting for my printer to arrive in the mail, shipping is a bit delayed. I am thinking I am going to make one of the Asohka helmets from season 7 of CW, very excited to start 3d printing and making helmets. I would like to make full armor but that is going to be a long project if I go through with it

[@leonruizleonruiz]

Great video. This will be a fine addition to my colection!

[@tannerhughes3940]

Oh, you should do the Coruscant Underworld Police helmet! I always loved those!

[@niffirg1113]

oh wow i used the same visor when i did mine haha! What i did was I flattened it by putting it in the oven on a cookie sheet on both sides and put a brick ontop to hold it down. it took a while but eventually it got flat.

[@quint2386]

Wow looks good!

[@fizzy4877]

41st clone scout trooper

[@bradylaughton5729]

Whenever I saw this helmet in the movies I always thought the visor was too high up for the clones to see out of it and after seeing you put it on it seems like I was right, but it still looks amazing

[@Unchainedmaple888]

For real, the visor is basically on their forehead

[@trideasni]

Great vid thanks for inspiring me to make clone trooper helmets 🙂🙂

[@astra6485]

I KNEW IT I SAW IT IN THE BACKGROUND OF YOUR LAST VID YES I KNEW!

[@CrispyFrenFry]

I have yet to make anything posted on this channel but decided to subscribe because the GA is such a great teacher and motivational speaker. Quality stuff!

[@tateoneill555]

You should do Commander Gregor, Commander Doom, or Commander Thorn helmets

[@cubscoutpack8288]

I ordered one of your animated clone commander helmets to make foxes helmet i love your videos so much thank you for making them

[@huni_nguyen]

Wow it look really awesome!!

[@Alex859G]

I ordered my 3d printer a while ago, it should ship tomorrow and I’ll be well in my way to making my own buckets!

[@lifewitholliethegsp9203]

thank you for inspiring me to 3d print I am working on Mando armor with your files

[@TheLeeper101]

Amazing build as always! Would you be doing a Death Trooper helmet/full armor build any time soon??

[@theguywiththeglass300]

You can use a rotary tool for the visors and for edging

[@echo_9920]

Dude I been waiting for this video for months and dude it was worth it because you did a amazing job man movie accurate.

[@amrypooins]

my 3d printer should be coming this weekend so im very excited for that

[@plathamk7]

Excellent helmet and video. Natural sponges for painting can give random appearance in future efforts.

[@propsandcosplay]

Great video I am getting my 3D Printer at the end of this month cannot wait to start to make my own helmets

[@nicholashall7999]

You should make a Shoretrooper helmet, love your work keep it up.

[@RD1138]

LOVE the build man. One day Ill have my own trooper armor. Also try using a dremel tool when cutting through thick plastic.

[@drunkensailor8643]

A mandilorian helmet would be cool too especially just something basic that we can modify ourselves

[@vanniegutierrez6810]

Your videos r super cool you just make great clone helmets I watch your vids over and over cuz they r dope

[@giorgostastsoglou7054]

Amazing work once again!

[@SirBBQSauce]

Oh it's beautiful

[@mathysoberholzer9189]

You’re realy good at this not gonna lie

[@commandergeokam2868]

Wow great job dude

[@fxlcqn2746]

i know this stuff takes a lot of material good job and keep up the hard work

[@GalacticArmory]

Thank you!

[@mouldy_nugget3333]

I can’t decide to get this one or not because this helmet has so much work

[@MIXJAEL]

At first I thought it looked completely disproportionate but then I rewatched the clip from the movie and it looks identical

[@SamuraiGeekDesigns]

I just discovered your channel here, but a customer just brought me your Clone Paratrooper kit that i converted to a Purgetrooper helmet. Great work and a sturdy helmet.

[@albertrogozinski6923]

Bardzo fajnie i pieknie wyszedl ci ten helm, wiele pewnie pracy w to wlozyles i trudu aby efekt byl wspanialy

[@MigMonkey]

I've printed many helmets and for some reason I'm always cheap about the amount of spot putty I use. I really need to follow your lead here and just basically dedicate a tube to a helmet. I'm always trying to do things cheaper and it usually bites me in the end. I use a lot of primer and putty is cheaper than primer so it makes sense to go heavier on the putty to save primer later.

[@wellgreat5505]

yo that looks sick

[@glitterbrains69]

some aviation sheers would have cut that nicely. beautiful helmet man

[@snazzyyeti5469]

Dang that’s cool.

[@Raquees101]

I would definitely buy a dc-15

[@MonkeyMaster1707]

Just made one from eva foam, not as accurate but still happy with it

[@sloop_3522]

He’s back again boys!

[@griffinator1193]

could you please do a toutorial video on how to use the recommended 3d printer thanks

[@gonkdroid7207]

If you put a silver tint underneath the visor it might make it look better

[@arashsyafiq5261]

Well, now this gonna be my new hobby, creating Star Wars helmet where it is very rare in my country to find one.😂 thank you for giving inspiration for me

[@alexmartinez9645]

Used the jb weld today. And hes right use gloves. My palm has a gray spot and I have no idea how to remove it besides letting time do its job 😆

[@frankieklein6110]

I like your videos and your helmets all look very good I watch all of your videos👍

[@lukealdieri5045]

Love this video keep up the great work

[@billysmith9387]

I love your videos. Keep it up.

[@alexpick518]

Nice to see the tabs. Removes a lot of worry. Have you ever tried using the print bed as a hot plate to make the visor easier to shape?

[@GalacticArmory]

I haven't, I'm not sure it would get hot enough but maybe if I left the visor on there for 15 minutes it might work

[@FiletoFish4]

why is this not more popular ???????

[@donaldnewhauser4529]

A super easy and cheap alternative to the visor would be a green plastic folder divider

[@GalacticArmory]

Great idea!

[@smeagollumartin]

Oh, it's beautiful

[@groggysword33]

Director.

[@Mrvillager-zp6tg]

also the 41st elite corps are my favorite clone legion

[@shoboy2180]

Great design! You should do Grees helmet to compliment it

[@gradyb9358]

Looks incredible, also I was wondering if you could start making imperial armor as well?

[@danielc1402]

Nice!! really enjoyed watching this video I have learnt allot, thanks for sharing! :-)

[@harveydoogle9820]

Nice job Mate. Im working on a senate guard helmet at the moment you shoudl try one to lol.

[@Matias-yj8ul]

Great job

[@dylonbronson4542]

With the camo ( it all depends on the colors) it’s better to start with your darker colors and do less of the light colors. So for that woodland camo it probably would’ve been easier to use a dark color first instead of the tan, because with the light colors you don’t want much of it. But the camo looks really really good though! I definitely like it a lot

[@apexprops2472]

Yo I love your work! I’m currently doing a Jesse arc trooper armor with your files!!! You should try and do an arf trooper that would be sick!

[@GalacticArmory]

Thank you! Yes, an ARF is on the list!

[@gab0139]

I do perfer your version of the color than the movie scout trooper paint layout.

[@sideways198]

Hands down best battlefront II skin

[@christianwood2322]

Definitely not enough recognition. This stuff is cool