I love making puzzles! This will walk you through it without missing ANY steps!
@keithleeth97689 ай бұрын
Hey boss. I’ve went through your video several times. Got the puzzle lib downloaded. But when I open any of the puzzles in lightburn, the puzzle pieces are not double lined like they are in the video. I’m not sure if I’m missing something, or if I downloaded the wrong file?? 🤷♂️ but I downloaded every file you gave on your site yesterday (12-12-2023) Any help would be appreciated. Thanks
@yvettereynolds59453 жыл бұрын
Tabs safe so much aggravation and save thy acrylic works , lightburn is the best software I own , thank you
@TheLouisianaHobbyGuy3 жыл бұрын
*Great to hear!*
@HewAndAwe Жыл бұрын
The requested URL or webpage address /product/lightburn-puzzle-templates/ was not found.
I love your videos. They are so helpful. I am very new to lasers and find the information very useful. I hae downloaded the art galleries and the cut files for my lasers for your site. I can not seem to find the puzzle ones though.
@TheLouisianaHobbyGuy28 күн бұрын
They're not on the forum anymore. You can use this website to generate a puzzle: gists.rawgit.com/Draradech/35d36347312ca6d0887aa7d55f366e30/raw/b04cf9cd63a59571910cb226226ce2b3ed46af46/jigsaw.html
@johndiego3105Ай бұрын
When I opened up the file in the Art Library, the lines were single lines to cut instead of the double cut. I’m sure it’s something I’m doing wrong
@TheLouisianaHobbyGuyАй бұрын
I've since changed them to single line John.
@angieangie213 күн бұрын
Great video thank you! Am I correct in thinking that because each piece is cut individually no kerf offset has to be included. Thanks
@TheLouisianaHobbyGuy2 күн бұрын
That seems to be the best way to get them to fit with some play Angie.
@angieangie21Күн бұрын
@@TheLouisianaHobbyGuy thank you :)
@derrickhaig41912 жыл бұрын
Hi Rich I have downloaded the puzzles to my Art Library but they don't have double cut lines for the pieces or outline. It was puzzles V2 that downloaded Can you help Derrick
@TheLouisianaHobbyGuy2 жыл бұрын
I updated it to single lines. Found that it works better that way Derrick.
@MrDmorgan52 Жыл бұрын
What if you're wanting a puzzle using an image with no background? Like a downloaded image of say Santa Clause. How can I get the laser to cut out outline of Santa without having these itty bitty pieces? TIA
@TheLouisianaHobbyGuy Жыл бұрын
Put the puzzle cut layer on top of the image.
@peterferrie4761 Жыл бұрын
Hi Rich i can not find the file Puzzles in the forum ,I can find one marked puzzles - V - 5 but this does not have the double cut line where can I find them please
@TheLouisianaHobbyGuy Жыл бұрын
I removed the one with the double lines. Folks had too much trouble using it.
@thomaskuzia8125Ай бұрын
Hi Rick, Another outstanding video. Thanks so much for doing this for all of us. I noticed in the preview you put up that this project would take over 12 hours. Is that time correct? And is this typical of a project? Something like this?
@TheLouisianaHobbyGuyАй бұрын
This one took 6 hours if I remember right Thomas.
@thomaskuzia8125Ай бұрын
@@TheLouisianaHobbyGuy thanks 👍
@reiback99 Жыл бұрын
Hello, I don't know if you will still reply to the comments, but I would be interested to know if you know the way to leave the puzzle pieces in a single cut and not in two passes.
@TheLouisianaHobbyGuy Жыл бұрын
Yes, just ungroup them and delete one, and then change the passes to 2 in the cut settings editor. I have changed all of my puzzle downloads to 1 line now.
@jrendt215724 күн бұрын
Thanks for the video. I was wondering if you had a tutorial about making the cutouts? I want to turn Xmas cards into small puzzles, so I need to be able to make a grid at the correct dimensions. Thanks again.
@TheLouisianaHobbyGuy24 күн бұрын
Use this puzzle generator: gists.rawgit.com/Draradech/35d36347312ca6d0887aa7d55f366e30/raw/b04cf9cd63a59571910cb226226ce2b3ed46af46/jigsaw.html
@jrendt215723 күн бұрын
@@TheLouisianaHobbyGuy Thank you very much!
@lpaltageek3 ай бұрын
I just finished making a puzzle with photo engraved. Running from Controller. Message "No enough extended memory"???
@TheLouisianaHobbyGuy3 ай бұрын
Delete some of the older files on the controller.
@lpaltageek3 ай бұрын
@@TheLouisianaHobbyGuy I only have around 10 files but will delete all but a couple and see if that helps, thanks for your patience!!!
@kimhendrickx587711 ай бұрын
How do I make my own puzzle patterns in Lightburn that have to be cut twice?
@TheLouisianaHobbyGuy11 ай бұрын
Try posting on my free forums Kim. lahobbyguy.com/bb I can't answer that in a comment.
@thesixofus27828 ай бұрын
Where can I find the puzzle downloads? Thanks
@TheLouisianaHobbyGuy8 ай бұрын
On my free forums. lahobbyguy.com/bb
@elizabethbarnett57816 ай бұрын
v5 does NOT have the double lines you mention in the video...
@TheLouisianaHobbyGuy6 ай бұрын
I don't use them anymore Elizabeth.
@ersheriff5 ай бұрын
Puedes poner donde está el archivo para descargarlo? Alguien me puede ayudar?
@TheLouisianaHobbyGuy5 ай бұрын
It's on my free forums. lahobbyguy.com/bb
@sic-madeairbrushing764 ай бұрын
Good video bro. One question, how do i get my cuts on my layers to cut at certain rotation. I move the layers and it still does not set up the way I won't. If you or anyone else can help me I would appreciate it. Thank you
@TheLouisianaHobbyGuy4 ай бұрын
On the Laser Tab, click on optimization settings.
@sic-madeairbrushing764 ай бұрын
Thank you brother. I have a Geieke Cloud Pro Co2.Making a puzzle for my grand daughter.
@michaelnewham25803 ай бұрын
How can I get hold of your puzzle grids
@TheLouisianaHobbyGuy3 ай бұрын
They're on my free forums in the members only area. lahobbyguy.com/bb
@addohm Жыл бұрын
Seems like the puzzle lib is not in your current package
@TheLouisianaHobbyGuy Жыл бұрын
Click the store link in the description. The free file is there.
@jayllup9171 Жыл бұрын
Hello..i am just a begginer in laser engraving..in my lightburn..my "art library" is empty..how can put a puzzle layout ?
@TheLouisianaHobbyGuy Жыл бұрын
kzbin.info/www/bejne/q6K9qqycmtqVhc0
@jayllup9171 Жыл бұрын
@@TheLouisianaHobbyGuy thankyou😊
@Azarathification8 ай бұрын
I've only done one jigsaw myself, it was one of the single line cuts as opposed to double that you show, and I found with kerf pieces were too loose. Wouldn't this shown here make the gaps between pieces even more pronounced?
@TheLouisianaHobbyGuy8 ай бұрын
Yes, I use the single line now as well.
@andytaylor88027 ай бұрын
@TheLouisianaHobbyGuy Have you altered the puzzle files on your website then Rich?
@Treacle19595 ай бұрын
Hi Rich sorry to bother you. I am slowly going through your KZbin video's and loving them all. I am only a year into laser's and I now have the sculpfun S30 ultra 33W. I just came across the this video reference jigsaw puzzles. I have had a look in the forum art library but I cannot find the puzzle file in their. If you still have it would it be possible to point me in the right direction. Many thanks and once again another great video. 👏
@TheLouisianaHobbyGuy5 ай бұрын
You have to be a free member on the forum to see the downloads.
@Treacle19595 ай бұрын
@@TheLouisianaHobbyGuy Hi and thanks for the quick reply. I am a member on your forum and I have most of your free art library, but I can't see the jigsaw puzzle file. I will log back in and take a closer look thank you 👌
@Treacle19595 ай бұрын
@@TheLouisianaHobbyGuy Hi again sorry to be a pain. I have searched the whole library for the puzzle.lbart but I haven't had any luck. from page 1 to page 4. It could be that this video is 2 years old and the file may have been removed. never mind I will try to work it out myself and I appreciate you have taken time out to reply. thanks for the video's. Mick 👏
@LonMcClure3 жыл бұрын
Another great tutorial! I've been thinking of making a family portrait puzzle for my mom who is in assisted living. She loves puzzles!
@TheLouisianaHobbyGuy3 жыл бұрын
I'm sure she would love that Lon! 👍
@ronaldderi74717 ай бұрын
Are there more complicated cuts for puzzles that don't have the same common shapes?
@TheLouisianaHobbyGuy6 ай бұрын
You can create your own!
@ronaldderi74716 ай бұрын
Mecpaw coming in Friday, will set up and start free trial of Light Burn, then add lib files and burn my first image. I have my mind set on a kinetic sculpture at some time in the future. Thanks for the reply.
@dale2512 Жыл бұрын
Was that 12 hours 41 minutes to make?
@TheLouisianaHobbyGuy Жыл бұрын
Nope, not even close.
@snoozy747 Жыл бұрын
Hi There @The Louisiana Hobby Guy (Rich) ....first off all....i just bought my first laser (sculpfun S9) and learnder A LOT from you.....CUDOS !!! But when i check your site and download your updated puzzles for ightburn...they are NOT double lined....is that a roblem...no use for that anymore ? greetz from the Netherands
@TheLouisianaHobbyGuy Жыл бұрын
Hi Passie, no, I've since gone back to the single line puzzles. They work for everyone.
@georgechambers31973 жыл бұрын
Brilliant, I've tried puzzles before but always had too much trouble. This will make it so easy I guess I'll have to try again. 😁 Thanks for the video, great to have you back!
@TheLouisianaHobbyGuy3 жыл бұрын
Definitely try it again George! It's one of my favorite projects for the grandkids and they love them! Good to be back! ✔
@lpaltageek3 ай бұрын
Thanks for all your suggestions on cutting a jigsaw puzzle, operating from the controller. Today I manage to cut a jigsaw puzzle with engraved photo grabbed from the Internet. The actual engraving is not up to par, but the picture was of a couple strolling in the rain. Very cloudy day picture.
@TheLouisianaHobbyGuy3 ай бұрын
Glad I could help!
@gothmaniow Жыл бұрын
hi Rich i just downloaded and checked out these files then took a look at the attached vid and in the vid it mentions you have to have a two line cut to make these puzzle templates work .. thing is all the designs in your new updated v5 puzzle Templates are all single lined :/ can you explain to me how to make these templates double lined or if there is a vid made for explaining how to ?? thank you , :D
@TheLouisianaHobbyGuy Жыл бұрын
I've stopped using the double line puzzles. They're all single line now.
@gothmaniow Жыл бұрын
Thanks for prompt reply 👍 do they work just as well then ?? 😁
@TheLouisianaHobbyGuy Жыл бұрын
Yes
@kiweekeith2 жыл бұрын
Absolutely Brilliant vidclip ..... Greetings from New Zealand ..... I just happened upon your vidclip and am Totally intriqued ..... Will drop you an email with More Questions .... :-) :-) :-) .... Best to All from NZ
@TheLouisianaHobbyGuy2 жыл бұрын
Welcome aboard!
@andytaylor88027 ай бұрын
Hi Rich. Have you ever tried cutting white sublimation ready 3mm plywood. I am wondering if it burns or not the white Sub coating.
@TheLouisianaHobbyGuy7 ай бұрын
No Andy, I have not personally, but other people have!
@arielrolfe5719 Жыл бұрын
This was so helpful! But I am having trouble finding the file for the single line version. The double lines are still very loose pieces. Can you share the link to buy the single line puzzle? EDIT - I found it! I didn't realize there was a forum separate from the website.
@TheLouisianaHobbyGuy Жыл бұрын
Awesome! Glad you found it!
@thedeveland2 жыл бұрын
Where are the puzzle files? They are not in Art Library, at least I cant find them
@TheLouisianaHobbyGuy2 жыл бұрын
Members only downloads... 4th from the bottom.
@thedeveland2 жыл бұрын
Still can’t find, what page is it on?
@TheLouisianaHobbyGuy2 жыл бұрын
@@thedeveland There's only one page in Members only downloads... 4th from the bottom.
@ASHORY20 Жыл бұрын
more then 12 hours for it?
@TheLouisianaHobbyGuy Жыл бұрын
It depends on your laser and settings.
@lpaltageek3 ай бұрын
I downloaded puzzle from Cuttle. When previewing cut file I get message "8 shape(s) were set to fill, but weren't closed. These have been removed as they cause problems....Options are Show me or Continue?
@TheLouisianaHobbyGuy3 ай бұрын
Change the layer from fill to line.
@LarryDMitchell Жыл бұрын
I watched this video before but was a newbie and figured this was beyond me. NOW, I watched it again and see some perfect personalized Christmas presents for the grandkids. I love the tabs/bridges function which is a BIG help. Great video Rich.
@TheLouisianaHobbyGuy Жыл бұрын
Glad you enjoyed it!
@ersheriff5 ай бұрын
Dónde está la descarga para hacer los puzzles?
@patrickobrien42663 жыл бұрын
Always look forward to your videos...the best I've found !
@TheLouisianaHobbyGuy3 жыл бұрын
*Wow, thanks Patrick!* 👍 So glad to hear that!
@TheFalconJetDriver Жыл бұрын
I have another question I have been taking photo graphs and mounting them on card stock then applying the puzzle template of yours. After running the file the kerfs seem to be too wide. and I have followed your kerf set up video to create the off set for a tighter fit but they are way to lose. what am I doing wrong?
@TheLouisianaHobbyGuy Жыл бұрын
Try not using any kerf offset at all. That seems to work best for me.
@CalebFlemming Жыл бұрын
I have tried this cutting out the puzzle pieces with the double lines and it is just to sloppy of a fit. if you just make 1 cut in the middle of the pieces they will fit together but I am having problems getting it to trace down the middle of the lines.
@TheLouisianaHobbyGuy Жыл бұрын
I do all single line puzzles now Caleb. I don't know what trace down the middle means. Try posting on my free forums. lahobbyguy.com/bb
@oliviermartin7871 Жыл бұрын
Hello, comment faire pour obtenir votre grille de puzzle sur lightburn ? Merci d'avance
@TheLouisianaHobbyGuy Жыл бұрын
It's in my free forum, lahobbyguy.com/bb
@oliviermartin7871 Жыл бұрын
Désolé je ne trouve pas ?
@TheLouisianaHobbyGuy Жыл бұрын
It's on the main page. You can only see the category if you're a member.
@ricknutz713911 ай бұрын
I added the puzzle to my art library, but when I go to any of the puzzles, it does not show double lines
@TheLouisianaHobbyGuy11 ай бұрын
I changed to single lines, but I can't edit the video once it's published.
@lindaputney1342 Жыл бұрын
I cannot get your library to download for the puzzles if you could shoot me a text on how to do that I would appreciate that thank you
@TheLouisianaHobbyGuy Жыл бұрын
Instructions are at the top of the page Linda.
@ersheriff5 ай бұрын
DONDE ESTA EL LINK DE DESCARGA?
@TheLouisianaHobbyGuy5 ай бұрын
It's on my free forums. lahobbyguy.com/bb
@katiewright96312 жыл бұрын
great video, i've downloaded the puzzle library from your website however cant find any files when i try and load into lightburn?
@TheLouisianaHobbyGuy2 жыл бұрын
You have to download them to the right folders Katie. I have full instructions on the download page Katie. Some folks have to right click on the files and choose, "Save link as" to be able to specify a folder.
@yvettereynolds59459 ай бұрын
❤❤❤thank you so much, I just made my puzzle with acrylic transparent.
@TheLouisianaHobbyGuy9 ай бұрын
Wonderful Yvette! These are fun to make!
@jimwoodworker41102 жыл бұрын
Another great video as usual. I think this a great idea. Going to try this with pics of my grandson. I downloaded the puzzle file. When I put one in Lightburn though it doesn't show the double kerf lines when I zoom in and there is no perimeter line on the outside of the puzzle. Am I doing something wrong?
@TheLouisianaHobbyGuy2 жыл бұрын
No Jim, I changed it to single line. Seems to work better.
@Bandit-di3pi3 жыл бұрын
i was wondering what happen to you not heard from you in a while .....glad all is well and you are back to some what of a normal life and back up and going .....as always great videio and i will give it a try and see what happens
@TheLouisianaHobbyGuy3 жыл бұрын
Thank you Mark! You can't get rid of me that easy! 😁
@schlotdoglaser3 жыл бұрын
I just learned something new.....never knew about the tabs. Rich....you da' man!
@TheLouisianaHobbyGuy3 жыл бұрын
Thanks Keith! Oh, and there's so much more to the tabs and bridges! I left most of it out for another video!
@martinfields3733 жыл бұрын
I'm so glad I stumbled across your channel. Great info in a concise, comprehensible format. Awesome work. Thank you so much.
@TheLouisianaHobbyGuy3 жыл бұрын
*Awesome,* thank you Martin!
@bidondolbaeb Жыл бұрын
Добрый день. Спасибо огромное за простое и наглядное руководство. Хочу заметить, что при резе элементов пазла простой линией, тоже результат отличный.
@TheLouisianaHobbyGuy Жыл бұрын
Yes, a single line is best, thank you!
@Simon-tn7vw Жыл бұрын
Thank you so much. I bought my first laser engraver and this helps me so much to save a lot of time and i learned a lot in this short and easy explained tutorial.
@TheLouisianaHobbyGuy Жыл бұрын
Glad it helped Simon.
@warriors4752 жыл бұрын
hi there Rich good video just wondered if you could make a video on actually making the pieces step by step so i can create my own puzzles would like to learn and you make your videos so easy to follow thanks and hope you can find time to make the video
@TheLouisianaHobbyGuy2 жыл бұрын
Yes Sir! It's on my list, probably a February video.
@glennmcmullin4592 жыл бұрын
I am doing something wrong, I did everything in the video. Everything looks good until I hit preview and it just shows black.
@TheLouisianaHobbyGuy2 жыл бұрын
Zoom way in in the preview window and you'll see it Glenn. When you're using images, you don't see the gradients, just a big black blur.
@glennmcmullin4592 жыл бұрын
@@TheLouisianaHobbyGuy Thank you for the response and the videos.
@TheFalconJetDriver Жыл бұрын
Rich Lightburn should be paying YOU! You are a wealth of information! Or I guess so many of US that use Lightburn are un willing to read the documentation! I will say it is a lot to digest.😁🛫
@TheLouisianaHobbyGuy Жыл бұрын
I wish! One at a time makes it easy to learn.
@lpaltageek3 ай бұрын
@@TheLouisianaHobbyGuy I am 84. Worry not about a President's age, just his experience.
@johnnymullins92372 жыл бұрын
The only file I see in your members only download section is Puzzles-v-5. When I install that into Lightburn 1.2.01, they seem to all be single lines, not double lines like in the video. Am I looking at it wrong? (I am new to Lightburn) Also: Since there is a slight gap between all the pieces when you cut (so each piece is cut individually), when you place your photo on top of the puzzle pieces, it seems that you will be missing these tiny gaps in the photo when you put the pieces together. as a puzzle. Wouldn't/couldn't it be noticeable?
@TheLouisianaHobbyGuy2 жыл бұрын
I've since changed to the single line puzzles. Watch my video about kerf offset. There will always be a gap where the puzzle is cut.
@johnnymullins92372 жыл бұрын
@@TheLouisianaHobbyGuy Ok. Thanks!
@rebeccareulet30162 жыл бұрын
Thank you so much. I will be back to review this one again.
@TheLouisianaHobbyGuy2 жыл бұрын
Thanks Rebecca!
@zebo-the-fat3 жыл бұрын
Very nice, why are all the best ideas so obvious after someone else desribes them?
@TheLouisianaHobbyGuy3 жыл бұрын
😁 I have a bunch more up my sleeve Zebo!
@amonraa712 жыл бұрын
PLEASE HELP. I downloaded it.I only see one line. There are two lines in the video.Parallel.Thank you.
@TheLouisianaHobbyGuy2 жыл бұрын
The line is in fill mode. Change it to line mode.
@amonraa712 жыл бұрын
@@TheLouisianaHobbyGuy Thank you. Greetings from Hungary
@timhaley7383 Жыл бұрын
As always a GREAT video. I can not wait to try this. Thanks.
@TheLouisianaHobbyGuy Жыл бұрын
Have fun Tim!
@notlem802 жыл бұрын
thank you! where is the puzzle library?
@TheLouisianaHobbyGuy2 жыл бұрын
On my free forum Jim, in the member's only download section. Link in the description.
@mikeledee8786 Жыл бұрын
Hey Rich, where do I download the puzzle file? Thanks.
@TheLouisianaHobbyGuy Жыл бұрын
In the member's only section of my free forums: lahobbyguy.com/bb/
@mikeledee8786 Жыл бұрын
@@TheLouisianaHobbyGuy As always thanks
@HGANGHONY2 жыл бұрын
I lost my layers palette. How do I restore them?
@TheLouisianaHobbyGuy2 жыл бұрын
Window --> Reset to Default Layout
@drasus2333 жыл бұрын
Glad you're ok and back! Awesome videos!!
@TheLouisianaHobbyGuy3 жыл бұрын
Thank you Doc! Glad to be back! 👍
@crowveg Жыл бұрын
Is it ok to resize the templates or will that mess it up?
@TheLouisianaHobbyGuy Жыл бұрын
Yes you can.
@stretch3736 Жыл бұрын
Hey Rich, another fantastic tutorial. I just downloaded and installed your V-5 Puzzle library and when I drag a pattern into Lightburn, they are not double lined, they are all single lines...am I missing something? I know I am, as it's alwasy 97% user error :)
@TheLouisianaHobbyGuy Жыл бұрын
No Jud, I changed them all to single line and refitted them. KZbin doesn't allow editing of videos.
@stretch3736 Жыл бұрын
@@TheLouisianaHobbyGuy ok thanks Rich. Next dumb question would be, do they cut fine with the single line? And then for your template to fit whatever image, just duplicate the outside perimeter?
@NoXs4u Жыл бұрын
@@TheLouisianaHobbyGuy Although you can't edit a video, you can put a text overlay to point out changes/mistakes/improvements at certain moments in the video. Maybe that can help in some cases.
@jerrywhaley62422 жыл бұрын
Thank you for the great videos you definitely make things easier to understand! I just became a member of the forum and downloaded the puzzle pieces which only have a single line. I researched it and made sure it was in line mode but also saw another that said it is only a single line now is that correct?
@TheLouisianaHobbyGuy2 жыл бұрын
Awesome, thank you Jerry! Yeah, I do them in a single line now.
@jerrywhaley62422 жыл бұрын
@@TheLouisianaHobbyGuy Thank you for the quick response will I need to mess with a kerf offset?
@mikeledee8786 Жыл бұрын
What material do you print on and or use as a backing for the puzzle? Thanks
@TheLouisianaHobbyGuy Жыл бұрын
I don't understand the question. It's just a simple piece of basswood that I engrave and cut.
@mikeledee8786 Жыл бұрын
@@TheLouisianaHobbyGuy what paper do you print the image on?
@mikehanzlik18192 жыл бұрын
I just ran across this video and it is great. I did see the response about glung a color picture to 3mm ply and cutting out the puzzle. I wonder if a person glued the picture on the material and then cut it from the back side if that wouldwork better?
@TheLouisianaHobbyGuy2 жыл бұрын
I don't think that would work. Maybe on a C02 laser, but not a diode Mike.
@mikehanzlik18192 жыл бұрын
@@TheLouisianaHobbyGuy thanks.
@yardennaveh24412 жыл бұрын
Hi, thanks for this tutorial! I may have missed something but I can't find the puzzle art library in the forum (I am a member). Any chance you can post a link? :) Thanks!
@TheLouisianaHobbyGuy2 жыл бұрын
Use the search box at the top of the forum Yarden.
@yardennaveh24412 жыл бұрын
@@TheLouisianaHobbyGuy thanks. I did use the search but couldn't find it at the beginning. After some more research I now found it, but I saw several people commented on the forum they couldn't find it either. Maybe worth pinning a post with the exact search term to look for. Thanks anyway - that's awesome!
@TheLouisianaHobbyGuy2 жыл бұрын
@@yardennaveh2441 I would have to pin a LOT of posts! 🤪
@yardennaveh24412 жыл бұрын
@@TheLouisianaHobbyGuy fair point 😜
@lorikasprack25542 жыл бұрын
why do you make it so difficult for newbies, i joined your forum and still cannot find the down load for puzzle, you make it very discouraging for people who are BRAND NEW. maybe you should take into consideration everyone is not computer savy or laser savy, thats why we come to youtube
@TheLouisianaHobbyGuy2 жыл бұрын
Sorry if you're having trouble Lori, but I try and make it as easy as possible! Here's how easy it is: Login into the forum --> Click on Member's Only Files & Downloads --> Click on Laser Cut Puzzle with template. *Literally TWO clicks!* I don't think anyone can make it any easier...
@TheMakersMarkTSF Жыл бұрын
WOW!!! The audacity of some people! Rich, on behalf of the thousands of inexperienced, computer illiterate, NOOB's that you have helped (especially me) I apologize that someone would respond to you in that manner! I have been putting in the work, studying hard, and feel like I am making excellent progress in Lightburn University with Professor Rich as my instructor. When I have a question I actually go to your extensive library and forum for the answers, and even if my inexperience or ignorance couldn't find the answer I would never blame in you! Thank you for what you have done for us all.
@shadowliving68582 жыл бұрын
Can’t wait to make some puzzles.
@TheLouisianaHobbyGuy2 жыл бұрын
Awesome! Everyone that sees them wants one!
@taylors-workshop2 жыл бұрын
Could you print a image on photo paper and stick it to card then cut it out on the laser?
@TheLouisianaHobbyGuy2 жыл бұрын
Sure, that's how it's done. People mod podge it. A C02 would be best for this, but a good diode can do it with air assist.
@taylors-workshop2 жыл бұрын
@@TheLouisianaHobbyGuy I may give it ago as just got my first laser sculpfun S9 and have fitted air assist to it.
@OldCurmudgeon3DP2 жыл бұрын
Would this work for Print & Cut?
@TheLouisianaHobbyGuy2 жыл бұрын
Yes, anything works in Print & Cut.
@icemanfred3 жыл бұрын
This looks like a fun project. But where is the puzzle template?
@TheLouisianaHobbyGuy3 жыл бұрын
The puzzle templates / Lightburn files are available on Forum Zombie, in the Members only Download section.
@icemanfred3 жыл бұрын
@@TheLouisianaHobbyGuy I must be missing something. i dont see a link in the description.
@TheLouisianaHobbyGuy3 жыл бұрын
@@icemanfred lahobbyguy.com/bb
@icemanfred3 жыл бұрын
at 2:59 I am doing something wrong . I imported a pic but I dont get the option to apply the mask to the image. how are you selecting both the image and the square template behind it?
@TheLouisianaHobbyGuy3 жыл бұрын
Drag from the bottom right, up over both slightly to the left. Dragging from the bottom right selects everything in the path.
@icemanfred3 жыл бұрын
@@TheLouisianaHobbyGuy i did that. i tried skewed images off center, lager image over the template, smaller image within the template. so I am doing something wrong. I tried control A but that selected EVERYTHING including the puzzle pieces. i used a jpeg for the image I wanted for the puzzle. does it have to be a different file type?
@TheLouisianaHobbyGuy3 жыл бұрын
Try starting over with a blank slate. Maybe a different file format for the image? I can't imagine why it wouldn't work for you.
@icemanfred3 жыл бұрын
@@TheLouisianaHobbyGuy I had to assign it a cut layer. Then it worked . However the puzzle pieces don't show through like yours. But it. Looks correct in the preview.
@TheLouisianaHobbyGuy3 жыл бұрын
@@icemanfred Click Window --> Check "Filled / Smooth" and it will look like mine.
@bentebrunsvelt3193 жыл бұрын
Thanks you 👍👍🇳🇱
@TheLouisianaHobbyGuy3 жыл бұрын
Thank you too Ben! I appreciate you watching! 👍
@jessetutterrow43202 жыл бұрын
I'm just beginning my laser journey, actually I have not yet bought a laser. Could you laminate a high-quality color picture onto a piece of plywood and then use your template to cut it into pieces? What would be the problems with this?
@TheLouisianaHobbyGuy2 жыл бұрын
Well, a typical 5W diode laser produces about 3255 Kelvin, or 5399° F when focused to a 1mm beam. The speed at which it travels significantly lowers the temperature, but it still does vaporize wood or plastic; that's how it cuts. It would do the same to printed photos and melt or burn all of the edges.
@lonniedupont2 жыл бұрын
👍🏻👍🏻👍🏻👍🏻👍🏻
@TheLouisianaHobbyGuy2 жыл бұрын
Thanks again Lonnie!
@janmueller413 жыл бұрын
You mention being able to download some of your projects but where do I go to be able to download an item?
@TheLouisianaHobbyGuy3 жыл бұрын
Janette, you're a Patreon supporter. *You have free access to my graphics website* engraveandcutfiles.com/. If you didn't get your 100% discount code, please email me and I'll send it to you. support@engraveandcutfiles.com
@yelenavanoorschot32483 жыл бұрын
Wonderful video! Thanks!👍
@TheLouisianaHobbyGuy3 жыл бұрын
*Thank you! Cheers!* ✔
@RoadstarRider13 жыл бұрын
Great job making these tutorials, this Puzzle looks like a fun project. Can you provide a link for the Puzzle Files, apparently I'm challenged . Thanks ... Tim
@TheLouisianaHobbyGuy3 жыл бұрын
Hi Tim, the download is in the Members Only section of my Forums. Once you become a member, the download section will magically appear 😎 lahobbyguy.com/bb
@RoadstarRider13 жыл бұрын
@@TheLouisianaHobbyGuy Thanks, signed up and looking forward to learning more about LightBurn.
@TheLouisianaHobbyGuy3 жыл бұрын
*Great Tim!* _See you there!_ 👍
@adrianchenciu94402 жыл бұрын
@@TheLouisianaHobbyGuy hello. I have fallowed you advice and became a membre I have foun the puzzle but it have ".lbart" extension.... What program do i use to open it? I use LightBurn and Corel 6 Thank You
@TheLouisianaHobbyGuy2 жыл бұрын
@@adrianchenciu9440 You don't open art files Adrian. You open Lightburn, go to the Art Library Tab and click on Load.