Making a Layered Mandala using Silhouette Studio and Glowforge

[@slagoon1]

Thank you for the tutorial! I just used it on a file while I'm waiting for my laser to arrive. Also thank you for showing that not every project comes out perfect - too many people on KZbin seem to think they should pretend everything is always perfect!

[@LadyCrockettCrafts]

Glad to hear you were able to follow along and apply it to your project 😁 Ya know, I thought about leaving it out but that's just the reality of some projects. Im continually learning to embrace the troubleshooting and small imperfections so I hoped it'd help others see that it happens to us all 🙃

[@MsOteplover]

Just want to say your tutorials are the best! I watched almost all of them before downloading silhouette and once I did I was able to create a design so easily based off of your videos. Thank you! 🥰

[@LadyCrockettCrafts]

😁😁😁 thank you so much for the feedback! I am so happy to have helped make your GF experience a bit easier ☺️

[@lquick6]

Good Grief!!!! My mind is blown!!!! I’m going to have to watch this about 4 more times to absorb the whole concept. You are amazing and I anxiously await every video you do. 😃. Thank you!

[@LadyCrockettCrafts]

You got this! It is all repetition with each layer so you'll get it down in no time 😁

[@kimcavanagh3807]

Thank you for the tutorial! I used it and it worked for me on my cameo.

[@lemonsqueezycrafts6818]

UPDATE: Just made one of these - it's so cool - and it cut all the way thru! Thanks for the tutorial!

[@LadyCrockettCrafts]

Awesome! I love hearing when someone has success following along. Sometimes I wonder if my explanation only makes sense to me 😆 I'm glad yours cut through 😅 For your previous post, if something non-PG doesn't cut through check that it is laying flat on the honeycomb use the hold down pins if not, make sure all lenses are clean and installed correctly, if those check out then either bump up power or slow down speed. Do a test cut of the new power or speed first (like I should've) I bump it up by 10 til I have success. If you do all that but it won't cut using PG material, then it's time to contact GF because PG material is supposed to be guaranteed to work and could lead to replacement material or machine.

[@CReyes-zc3de]

I cannot wait to try this. I have been wondering how to achieve this affect. Thank you so much. I love your tutorials, please please keep them coming!

[@LadyCrockettCrafts]

Thank you 😊 If you're in the Facebook group, Glowforgers using Silhouette Studio, please share a picture if you try if out! I'd love to see!

[@TheWinger1008]

Superior tutorial. Great job. Please don't quit posting tutorials.

[@LadyCrockettCrafts]

Thank you so much and for the encouragement! ☺️

[@thelordneww]

thank you very much , very clean and clear tutorial easy to understand for beginner.

[@LadyCrockettCrafts]

Thank you for watching!

[@normansautomotive1110]

Thanks for the tips and tricks !!

[@LadyCrockettCrafts]

Thanks for watching! Can't wait to see your mandala creation 😯

[@CelestialHandpan]

Thanks a lot! very usefull. bless

[@sabrinasanchez5020]

Awesome thank you

[@lisaw1085]

That was amazing!

[@LadyCrockettCrafts]

Thank you ☺️

[@lemonsqueezycrafts6818]

This is awesome. May have to give this a try today. I am having a lot of problems with it not cutting thru even when using proof grade. Any suggestions?

[@wausua]

Hi. Thank you for sharing all of these. I find it very helpful. What thickness of the mdf board that you used? Do you have a recommendation for this?

[@LadyCrockettCrafts]

I believe this project was the 1/8" which is the Medium proofgrade. I think it depends on how thick you want your final project to be or how many layers you want to stack. Thicker material or more layers means a thicker and heavier final project of course. Hope that helps!

[@wausua]

@@LadyCrockettCrafts Thank you

[@karenturner5443]

Just curious I looked at the tape your referring to in description and it says not to be used with any laser cutters. Have you ever had issues with it?

[@LadyCrockettCrafts]

No I have not. I have read others contacted the company to ask why they added that sentence and they do not want to be liable for laser fires. One of the main causes of fires inside a laser cutter is when the tape comes up and is hit by the laser beam. Always make sure to scrape any tape down onto your material and never leave the laser unattended :)

[@martinduffy3835]

how are you separating the graphics to simpler layers ?

[@LadyCrockettCrafts]

The steps to creating each layer are in the video but if you need specific help you can email me at [e-mail]

[@harleymamma7272]

What do you use as your weeding tool?

[@LadyCrockettCrafts]

The pin looking item is called a Pin Pen and it came from a craft vinyl company. I also use a plastic razor I got from Amazon.