Making a Powerful AC from Peltier || How To Make AC

[@kemal-kml1]

Elimde 40.45.11mm boyutunda heatsink ve 12V mini fan var termal macunum da var sıcak tarafı soğutmaya yetermi ayrıca kullandığın büyük fan dışarıyamı hava veriyor?

[@andyhowlett2231]

Peltier modules are only about 5% efficient and require more energy input than a conventional compressor type. I think if you take everything into account, you would find your system is not really worth the expense and effort. Could be useful for cooling a very small space like a drinks cooler though.

[@Santanu_Pal]

if we increase number of pelter around 100 or more? What will be effect?

[@andyhowlett2231]

@@Santanu_Pal Then you will need 100 times the power.

[@San-leitorplan]

did it work 100% real?

[@CreativeComponents]

yes....

[@omidb_ny]

Does the back fan should take out the hot air or blow air to heat sink to cool it?

[@CreativeComponents]

the back fan blows air to heat sink to cool it.

[@jbodden6977]

THE HEAT SINK DOESNT CARE... AIR FLOW IS AIR FLOW.@@CreativeComponents

[@DeepakKumar-lo9lk]

Nice video.. what is power of the TE unit including fans

[@CreativeComponents]

I have used 12v. 5amp. in video.......

[@Santanu_Pal]

how much time it take to decrease temperature of 10 degree ?

[@CreativeComponents]

to reach 10 degrees, you have to used a water block for heat side.....

[@sachinkushwaha2260]

If we use water block in cold side will it decrease temperature for water cooler, What supply should i use for peltier 12706+ water pump+ 12vdc fan.. Plz explain

[@akshayarr159]

How to do this with lithium battery what would be the connections of the peltier module

[@CreativeComponents]

just make a 3s battery pack and connect it as a power supply....

[@qnoy7246]

Kalo pakai 4 pelite bisakah..dan arusnya harus berapa amper agar seimbang

[@kykolin5162]

Why I make follow u not working? If is very hot not cold my power supply 12v 10a Tec1-12706

[@nasareenashique7224]

Peltier module has two sides. One side is hot and the other one is cold. Try flipping it

[@justinjohnson4502]

Check for shorts and make sure you applied thermal paste correctly

[@aitch_games]

how can i make ac helmet with this

[@CreativeComponents]

you can try with this...

[@Kamrujjaman_9510]

😊❤

[@SudipBagbazar]

I am trying to set up a peltier 12706, supplying power from a 12 Volt, 6 Amp transformer rectifying & filtering it into 12 V DC. At first the heat sinks on the hot side is heating up and cold side is cooling respectively. A few minutes later the cold side is also heating up. How to rectify this?

[@CreativeComponents]

you can use water block...

[@Piery83_]

I bought a module like this. Is properly wired but doesn't work 😢

[@CreativeComponents]

so, I think that your module is damaged.

[@dannyc6166]

I built one. Works good but uses so dang much power. I haven’t even tried using a battery.

[@dog7y237]

The hot side has fan too,,will that heat up the room too😂

[@andyhowlett2231]

A lot of people don't realise that refrigerators and AC units have to exhaust the heat from somwhere. This is why AC units are mounted on the outside of a building or have a large tube that hangs out of the window. Running it indoors is pointless as the heat just goes around and around.

[@brunoalves1047]

Porque eles sempre cometem erros na hora de montar umas coisas dessas?? Colocam os fios que já esquenta na parte que gela, aí perde eficiência pois os fios vão estar quentes no lado frio

[@richardfernandez6]

It really worked.simple

[@CreativeComponents]

Glad it helped

[@samsungbrand5485]

Experiment kiya tha bro but not efficient for cooling money energy

[@CreativeComponents]

cooling increase karne ke liye peltier module extra add karna padega....

[@LucianIchim-m9l]

Este totul greșit.....nu așa.....😮

[@andrenasi8369]

😂😂😂😂😂😂😂