How to make a Fast Cooling AC , DIY Mini Refrigerator to -40°C , Simple Freezing AC 100% working

Рет қаралды 487,165

Amy i

Күн бұрын

Пікірлер: 232

@amy.i 3 ай бұрын

मुझे सरकार से कहना पड़ेगा कि comment पढ़ने वालों के लिए सैलरी की व्यवस्था की जाए

@Жумабай-ц6ч 11 күн бұрын

❤❤❤❤❤,супер, спасибо лайк 😊😊😊😊

@maricelalipio6503 9 ай бұрын

An oversized tubings works for the 1st time in refrigeration history and without vacuuming the system. What a great show..

@Web-Rencontres 6 ай бұрын

hello tou say that is a fake ?

@RyanMcDonald 9 ай бұрын

This doesn't work without the chicken noises.

@dannyverhamme7970 8 ай бұрын

😂

@dirtybird2202 5 ай бұрын

I did refrigeration and Hvac systems for over 40 years. This is a very Basic Model and if you don't know what you are doing a very Dangerous Toy. At most a Science project that should only be done with a professional that can teach you the Dangers of " Hi pressure " and low pressure systems. Which by the way is in nearly every Refrigeration system. There are a few forms of cooling that do not even have pressured systems and use no Gases. Such as Dielectric systems. Refrigeration systems need some specialized tools to work with these systems, some of these you cannot even buy without a license for very good reasons. This is at most just a model and " NEVER EVER use any Flammable gas in Refrigeration. " If you do not know Why never to use Flamable Gass's then you do not want to play with this Technology. Tubing in these systems is not just will nilly sizes, it is all sized to get the best performance and safety standards. We do not use lead solders for joints. The Evaporator and Condenser with this capillary system none of it is sized correctly. This is also not true as to the temps you would get with this and there are very good reasons not to do this at home. Even the use of some of the materials used wouldn't work. Refrigeration is best left to the professionals " I CAN NOT STRESS this ENOUGH " I guess next he will show you how to make a Ammonia Lithium Bromide chiller system to Cool your whole house, using common materials found around the house and at the Local hardware store. And by the way 134 A is very Toxic. Guess he didn't point that out to. Don't mess with this unless YOU DO KNOW WHAT YOU are doing." If you want to learn then, go get the Training," learn how these systems work and the fact that even the wiring is not in the same standard as in regular wiring systems that a Licensed Electrician does. AC and refrigeration systems to a person should also learn why there is the so many different forms of the systems and why they might be used. There is also no such thing as Cold in Refrigeration, it is all about moving Heat. If you don't know about some of the most basic things in this industry like how to measure Superheat then you don't know what you are doing. You place your life and health and possibly others at very great risk. Many of these systems also use very high voltages and are high amp systems. This should all be in the MUST READ Description of this Video. In the Seeking of Knowledge, Seek Wisdom to know what to do with the Knowledge you have learned. This goes with everything in life.

@chatamin2332 4 ай бұрын

احسنت

@amirouw 9 күн бұрын

how much pressure difference do we need for r134? at least?

@JuanOgami 9 ай бұрын

Es ilogico hacer una carga de gas sin valvula de carga

@ShohjahonTuymurodov-ft7hc 8 ай бұрын

This pump is a simple water pump, not vacuum. So it can't work under high pressure of butane. And that is just one problem of making it. We need more stronger apparatus

@gwangyonglee3230 4 ай бұрын

How great would it be if refrigeration systems were this simple?

@chatamin2332 4 ай бұрын

@bennguyen1313 4 ай бұрын

With the popularity of cold-plunges, and considering a refrigerator outputs 32-40F (0-4C)... I'd love to remodel a bathroom, such that with a flip of a switch somewhere, ice-water comes out of the shower-head! Any thoughts if this is do-able , or is a shower's water flow too much for on-demand ice-cold?

@theuvaxd 10 ай бұрын

Video falso, no pierdan el tiempo, el sistema de refrigeración no es tan simple como lo pintan en este video, primer error, el sistema de refrigeración no usa bomba para impulsar gas, si no un moto compresor para comprimirlo, posteriormente proceso de condensación que es bastante complejo y por último la expansión para se genere la escarcha, todos esos procesos llevan cálculos de termo dinámica, trasferencia de calor, dinámica de fluidos entre otros que solo los ingenieros con días o meses de estudio logran definir... Por lo tanto, esto es totalmente falso...

@jeisondavidborregoricardo1008 10 ай бұрын

Ya hiciste el experimento?

@track3r152 10 ай бұрын

@@jeisondavidborregoricardo1008 No creo que haga falta hacerlo, es falso, ni siquiera está conectado a la corriente xD

@robertwilkinson8115 9 ай бұрын

@@track3r152 Do not waste your time! This has so many things wrong with it. Learn a little about refrigeration and you will see that it is fake.

@maximuscomi 8 ай бұрын

(BULLSHIT).. il Titanic fu costruito da personale specializzato i migliori ingenieri ed affondò nel viaggio inaugurale L'ARCA di Noè invece affrontò il diluvio universale salvò la famiglia e gli animali e dopo 4000 anni è ancora sul monte Ararat che aspetta il prossimo diluvio ..😏

@emiliomunoz1455 7 ай бұрын

Con una bomba de fluido no se alteran las presiones en imprescindible ciclo de expansion-compresion. La escarcha de un solo momento denota lo inutil del ventilador. Es un video fake.

@GunaSatu-uj2gn 10 ай бұрын

How long does it last and doesn't burn?

@claycoates5056 9 ай бұрын

YES

@Bandicoot803 8 ай бұрын

These guys publishing such fake videos obviously know nothing about western technology. Oh, and please, wash your hands before publishing.

@Maikeru110572 7 ай бұрын

Probably Indian. All their videos feature dirty fingernails and soild hands. 😄😆😅🤣

@0oTornado 5 ай бұрын

Indian dont like pathing

@squrilebrain 4 ай бұрын

when is part 2 with the car AC HFC-134A GOING TO BE MADE !

@pappumachanic4194 8 ай бұрын

Good video

@joekolon3106 4 ай бұрын

would it work with the r134 ? seem safer than butane

@georgebloshchitsin2377 7 ай бұрын

I made myself such a thing. When turned on, the temperature drops to absolute zero and complete democracy of the brain occurs.

@dalidalii9871 7 ай бұрын

Its true to those who are not single but to single problem they want to shake it every 5 minutes and mess up everything bcz they like to shake everything they touch its hobby to them

@subramanya.k 8 ай бұрын

I am definitely trying this and will post my result . Hang out

@delsam1215 6 ай бұрын

Hello Amy.i, a great project, question, what size copper pipes did you use? what size plastic tubing did you use? Thank You

@amy.i 6 ай бұрын

Copper pipe 1/4" 2 fit

@thertn42 4 ай бұрын

Dia size and length pipe of small pipe plz ?

@waseejee5732 10 ай бұрын

Hello sir I really want to make it, can you guide me ? What should I use a water pump or an air pump and how much pressure should it have? And what gas should be use ? And copper pipe sizeing n diameters, like condenser, evaporator, and capillary tube, would you please explain im waiting Please please please

@amy.i 10 ай бұрын

It is made for science project, not for long term use.

@amy.i 10 ай бұрын

If you make a project like this, then you will have to find a good compressor to take time.

@waseejee5732 10 ай бұрын

If we use a 12 volts 100kpa air pump in it and if we put butane gas in it how long will it work ?

@waseejee5732 10 ай бұрын

Can you give me your WhatsApp contact please? I want to make a project like this, i have a 12v mini compressor and a 12v 100kpa air pump please please

@TheHVACWhisperer 9 ай бұрын

Good build to demonstrate refrigeration. I would like to see a temperature difference by displaying a thermometer in the video. 😊

@randomskillsmk 8 ай бұрын

You can use A134 but use valve piercing to the copper pipe

@harryng6669 8 ай бұрын

No pressure at all? Refrigerant will pop out.

@aracy30 8 ай бұрын

Didática pura!

@amy.i 8 ай бұрын

@FriluncarBiplob 10 ай бұрын

I tried making this three to four times. Here I have used copper pipes, a high pressure water pump, and LPG gas. Still this doesn't work. If anyone knows the solution, please reply in the comments

@ambush427 10 ай бұрын

The problem is the high pressure pump doesn’t design to suck gas because the input of normal compressor is refrigerant gas

@KendyNhim 10 ай бұрын

I done it ,but it's doesn't work. The problem is you need a really high pressure motor not just a small motor in this video

@mamatmontana3308 9 ай бұрын

The solution is in the butane. Not lpg. Butane has boiling point of 0.5C. Under small compression it became liquid.

@claycoates5056 9 ай бұрын

this is simple it is not pressure it is the speed of transfer

@randomskillsmk 8 ай бұрын

High pressure won't work need low air pressure 12 v air pressure

@МихаилМедведев-и3ы 6 ай бұрын

Were get this pump??????

@nyannyan9422 5 ай бұрын

Everywhere on internet

@arupmallik3070 8 ай бұрын

Will nylon tube on the high pressure side survive the pressure close to 150 psi?

@MohamadRahimi-k7s 8 ай бұрын

وظیفه این گاز خنک کردن است ومانند هیدرولیک نیست که لازمدبه فشار زیاد داشته باشد اما میشودبجای لوله پلاستیکی همان مس را قرارداد و برای تزریق گاز از یک شیر یکطرفه استفاده کردچون بتدریج قدرتش را ازدست میدهد درضمنلوله مسی برای انتقال گرما والومینیوم برای هم سرما

@haroongouri 8 ай бұрын

Uselesd

@jean-yvesbeguec9944 8 ай бұрын

Painful feeling of having been taken for an idiot, of having wasted time, of having needlessly warmed the planet, of having witnessed, helplessly, the waste of the copper, of the gas bottle which could have been used by a real freezer... You have masterfully described the ravages of Western capitalism and the globalized “market”. Bright. I put a thumb up

@anthonyhiscox 7 ай бұрын

Judging by the end of your comment, this isn't the first time you've been taken for an idiot.

@garygesell5629 10 ай бұрын

What is the lifespan of the refrigerant? Do you have to keep charging it. How long would it cool a 4x4 ft grow tent?

@viagra5207 9 ай бұрын

its fake

@wendellhammond7853 8 ай бұрын

it doesn't work dumd ass

@mohamednosser1465 5 ай бұрын

What is the name of the part that pumps gas? I would also like some information about it so that I can search for it in the Arab-African market

@Crozbyguy-rg1iu 7 ай бұрын

Butane is heavier than air. If it leaks on a brushed motor the arc will ignite the gas. Instant torch heater. Brushless pumps are cheap, lower power required, pulse driven, non contact, no commutator and bushes that spark.

@jamesrodemeyer7544 8 ай бұрын

Try usung a little hair spray when attaching the tubing. It adds a little lubrication when fitting the tubes and it also dries and acts as sealer and glue to hold the tubes together better.

@budichanel6240 7 ай бұрын

Ide yang sangat bagus mini AC

@mercedesm.7851 7 ай бұрын

Could you explain to us the interior diameters of the three copper tubes that you used?

@amy.i 9 ай бұрын

This is best science project Only science project not a long usable

@tebbink 8 ай бұрын

Banyak sekali konten yang serupa bahkan persis seperti ini. Yang hampir semua hanya berhenti pada penjiplakan. Sebenarnya kita bisa saja dengan relatif mudah menambahkan beberapa data tehnik sederhana, seperti volume gas, tekanan dalam sistem dan data sederhana lainnya 🤷🏼‍♂️

@amy.i 8 ай бұрын

Brother, for those of you who are saying that this fridge doesn't work, a new video is coming for them, you have to shut your mouth.

@tebbink 8 ай бұрын

@@amy.isepertinya anda salah paham dalam menerjemahkan kalimat saya. Bahkan over thinking. Saya hanya minta data-data teknik agar lebih ilmiah. Karena saya yakin bahwa anda adalah content creator yang istimewa.. 😀 Good job kawan!! Semangat!!

@Davidsiahaan22 7 ай бұрын

Fake shittt

@СтаниславГромов-у8з 4 ай бұрын

@mahathevkrishna7839 9 ай бұрын

DAMN! WASTED MY PRECIOUS TIME! LUCKILY, I FAST FORWARDED! 😝

@michaellichter4091 5 ай бұрын

Creo que ChatGPT podría ayudar con los cálculos. Sin embargo, lo mostrado en el video no funcionará. Para un mejor efecto en el video, se podría rociar spray refrigerante en el evaporador. Si se desea un sistema de refrigeración de este tipo, se puede comprar una nevera portátil con compresor para 12 voltios, que incluye todo y funciona bien.

@احمدالسيدالبدوى-ي6ش 4 ай бұрын

السلام عليكم ورحمة الله وبركاته... ممكن بعد اذنك اعرف نوع الغاز المستخدم علما بأني مصري ولا أجيد الانجليزيه

@amy.i 4 ай бұрын

Thanku so much watching my video can I help you

@Peter-jo3wt 5 ай бұрын

Planning on building myown... W/ improvements.

@Pinkishorts-x7s 3 ай бұрын

Hii 🙏🙏🙏 s me

@TanishK-ENTERTAINMENT 9 ай бұрын

Bro it needs high pressure water pump cant give pressure like compreshor

@claycoates5056 9 ай бұрын

not nessary

@pnunesbsb 9 ай бұрын

Hi. Excellent video. Congratulations! One question: why did you need to remove the nebulizer compressor? Couldn't you use the complete structure, including the original 6V power source, without having to disassemble the nebulizer?

@YourBoyEden 8 ай бұрын

based on what i saw, the two nipples on the nebulizer needed to be exposed to attach them to the clear hose. If the black thingy isn't removed then the hose wouldn't fit. and the power source could be combined with a single 12v battery which would be more compact..my 2c

@wendellhammond7853 8 ай бұрын

Not a good video all fucking lies.

@josefjael6851 7 ай бұрын

Good 👍 idea

@tihomiriliev5991 4 ай бұрын

how long will it cool on this charge

@spudzmacco 5 ай бұрын

Music?? Something different maybe?

@Peter-jo3wt 5 ай бұрын

Provide your own music ? I know. Life is so hard🤣

@swapnanildas521 8 ай бұрын

If I can't use any fan outside of the pype then the cooling is generated?

@sridhargajjala261 9 ай бұрын

Very very slow video

@corretor.rony.10421 9 ай бұрын

Is this compressor a vacuum pump or a simple water pump?

@user-cccp 5 ай бұрын

Компрессор для аквариума

@awniadel 5 ай бұрын

hy. can do this idea with Vertical fan because i can't pay AC

@awniadel 5 ай бұрын

please If you can implement this project, please explain the components precisely so that I can implement it

@tiagomatrix3353 10 ай бұрын

Ideia boa, mas faltou o óleo!

@1islam1 10 ай бұрын

⚠️ Deus disse no Alcorão: 🔴 { Ó humanos, adorai o vosso Senhor, Que vos criou, bem como aos vossos antepassados, quiçá assim tornar-vos-íeisvirtuosos. 🔵 Ele fez-vos da terra um leito, e do céu um teto, e envia do céu a água, com a qual faz brotar os frutos para o vossosustento. Não atribuais rivais a Deus, conscientemente. 🔴 E se tendes dúvidas a respeito do que revelamos ao Nosso servo (Mohammad), componde uma surata semelhante à dele (o Alcorão), e apresentai as vossas testemunhas, independentemente de Deus, se estiverdes certos. 🔵 Porém, se não o dizerdes - e certamente não podereis fazê-lo - temei, então, o fogo infernal cujo combustível serão osidólatras e os ídolos; fogo que está preparado para os incrédulos. 🔴 Anuncia (ó Mohammad) os fiéis que praticam o bem que obterão jardins, abaixo dos quais correm os rios. Toda vez queforem agraciados com os seus frutos, dirão: Eis aqui o que nos fora concedido antes! Porém, só o será na aparência. Aliterão companheiros imaculados e ali morarão eternamente. } (Alcorão _ 2 : 21-25 )

@computerscientist1010 9 ай бұрын

Excellent👍Laptop Trainer Vikaram Sir And Components Trainer Rajesh Sir all Concept Clear the Best Multitech Institute For Laptop Repairing Course Available Multipal course

@onepreeti 7 ай бұрын

Nice❤

@MariaElena-si7hb 9 ай бұрын

Very interesting but you are slow, slow showing the video. Thank you.

@topgearIQ 9 ай бұрын

Do you make refrigerator

@dishaelectro 8 ай бұрын

Mantap idenya

@marceloferreyra8225 9 ай бұрын

Si funcionó César.....para el vendedor de caños....jajaja....saludos!

@VinodVerma-bf3mt 10 ай бұрын

Sir please try with R134a gas

@claycoates5056 9 ай бұрын

that will not work need pressure this system will not do this is a low pressure system

@apexpromotionscarl 23 күн бұрын

this doesn't work, its a sealed system and you can't inject the refrigerant it just blows out as soon as you remove the needle.

@riavillegas7160 10 ай бұрын

It’s work perfectly but the buetene you insert inside the pipe easily goes out.

@kunasagaran5740 9 ай бұрын

Taking us for a ride.

@KhatuShyam55511 8 ай бұрын

Use is high presit pump

@tarekameur9844 4 ай бұрын

Please, is this program real or fake?

@amy.i 4 ай бұрын

@@tarekameur9844 real but this is science project for school college

@enricoprincipi6974 4 ай бұрын

fake

@juliokk758 10 ай бұрын

A la precion que debe ser sometido el gas refrigerante para q al evaporarce genere frío eso haria que salga todo por las uniones de los tubos

@carlosdaniel-lm3lz 9 ай бұрын

Saca los tubitos de algún refrigerador viejo que ya no sirva.. el diámetro es de unos 2 milímetros. Y lo conectas al de 1/4

@bossnimbus 10 ай бұрын

Wasting my time

@asitsarkar2138 7 ай бұрын

Motor link

@Swenser 9 ай бұрын

Impossible. Need higher pressure. Much bigger pump to compress the bastard gas. And the coil would need fins like real radiator. Waste of time but looks good for school project to understand for small children.

@claycoates5056 9 ай бұрын

HUH ? this is a low pressure system

@Swenser 8 ай бұрын

@@claycoates5056 nonetheless. That water pump isn't going to do anything except move the fluid around.

@claycoates5056 8 ай бұрын

how did the Sevell system work with out a pump @@Swenser

@Nasib360 7 ай бұрын

the fan you guys use no need bcoz the gas if you spray on copper without air its not gona make ice

@Biplob464 9 ай бұрын

উল্লুক, ভেকুয়াম গ্যাস চার্জ ছাড়া কি ভাবে তোর এসি চলবে।

@carstenjensen3857 5 ай бұрын

Not possible to cool anything that way.

@russellwaite5874 8 ай бұрын

never believe any of what you hear and only half of what you see

@marioevie9554 9 ай бұрын

Como se llama ese motor que usas. O es una bomba. Porfa infórmame . Es bomba o es un compresor.

@LucianIchim-m9l 8 ай бұрын

Pompa nu este bună...

@SandipBarua-et1iq 7 ай бұрын

How much cooling oil has to be put

@Mohamedamr-si8lv 4 ай бұрын

Why you changed first the condenser coil, second the motor..... I think this is a fake video

@prashantajena2264 7 ай бұрын

Slow, incompleted, background music high noise, nothing verbally explained video. Sorry.

@HABIBKHAN-g6u5t 8 ай бұрын

দাদা, আমাকে বানিয়ে দেয়া যাবে কি।

@sanjaysharma-sj7fj 8 ай бұрын

ro motor pump try

@وحيدمراد-غ1ه 5 ай бұрын

كم من الوقت يشتغل عند وضع الغاز

@abdulhaye5101 10 ай бұрын

Please iski detail to bata rahi hai jo aapane teen coil banai hai Inka kya purpose

@amy.i 10 ай бұрын

Condenser coil hai

@deepakprajapati2920 9 ай бұрын

Choti coil dust ke liye hai

@ejajsk9662 9 ай бұрын

R 134 a gas se kam karega??

@amy.i 9 ай бұрын

Yes

@RichardRounds-k9z 7 ай бұрын

I only would like to comment on the soldiering. As a silver brazer it would say please all you ,,,youtube,,,, soldiering ,,,,your impatience kills me. If your new and understand the soldier will not stick or fill your holes unless the base metals are up to temp. Please youtube learn the proper technic. Even those soldiering wires for electrical soldiering slow down let your base get up to temp. Now I've repeated twice hopefully the human brain that needs three time for it to stick in brain can add the third time. God Bless

@globalcitizen9206 8 ай бұрын

Can’t bent copper tube properly. Wasting time.

@arnoldescobido5549 7 ай бұрын

Not good, you did not show wether it is working or freezing...

@carlospena1506 8 ай бұрын

Podría ser un buen proyecto escolar , soldar con estaño y cautín , de verdad crees que todos somos tontos , esa unión ni en tus sueños más humedos va a soldar

@raymondgacusan35 7 ай бұрын

Working but no longer use because of heating na pump and very small amount of gas

@nattaponboonrapanawibul6054 8 ай бұрын

thank you

@kvsy900 10 ай бұрын

Когда видео про 134а?

@JarerSaro 7 ай бұрын

some say it works but only for few minutes, the you said its good for beginers but for serious toy a good peltier is a better choice

@МихаилПронин-ъ7и 5 ай бұрын

How to determine if you are being deceived? It's simple. 1. In a real refrigerator, the radiator for heat removal is much larger than the cooler, but on the contrary, the refrigerator will not produce as much frost as in the video with that small radiator. 2. For some reason the fan is located opposite the refrigerator, and not to blow out heat. It's simple, this is a fake video, a fan is needed to show how quickly the ice grows. In fact, it's the other way around, the frozen tube melts and this is shown in reverse order. For this you need a fan. If a fan actually blew air through the tube, ice would never form there. This is a lie.