Making a PTC Heater.

[@Crazy_Maker82]

3D Design File Download : www.thingiverse.com/thing:5915982 Parts List (Affiliate Links): 1xSTC-1000 (Digital Temperature Controller) : s.click.aliexpress.com/e/_DBajNad 1xPTC Heater (12v 200w) : s.click.aliexpress.com/e/_DkmW3E5 Silicone Wire(18AWG) : s.click.aliexpress.com/e/_De9HYtr 2x50x50x20 Cooling Fan(12v Dual Ball) : s.click.aliexpress.com/e/_DECAI2Z 2xFan Guard(5cm) : s.click.aliexpress.com/e/_DlUtOet 1x16/20A Switch(4PIN On-Off) : s.click.aliexpress.com/e/_Dmudvw5 1x30A Relay : s.click.aliexpress.com/e/_DeElrNb --------------------------------------------------------------------------------------------------- Tubular Terminal : s.click.aliexpress.com/e/_Dl4mZp7 Box Insulated Wire Connector : s.click.aliexpress.com/e/_DldST6V Crimping Pliers : s.click.aliexpress.com/e/_DEvtIvf Heat Shrink Tubing : s.click.aliexpress.com/e/_DBmQ9nJ --------------------------------------------------------------------------------------------------- M3 or M4 Bolt & Nut Set : s.click.aliexpress.com/e/_DnKmzCZ Quick Splice Connector : s.click.aliexpress.com/e/_DE4B4DJ Waterproof Wire Connectors : s.click.aliexpress.com/e/_DBdw3GZ

[@PTC_YIDU]

Thank you for choosing our products for testing~

[@Amirl.b]

Usar lm324 low off scr BMS batería 12v para no evitar daños precauciones

[@rickyseddon4786]

Very cool! I love the clean design. Appreciate you supplying the 3D model files also 😊

[@smartsalif9609]

Nice and clean work

[@waynesanders1406]

Just found this video, I've been looking for a liquid heater that is thermostat controlled to kick on and heat up (ammonia, so I can't use aluminum) for an invention I am working on. I'm having one hell of a time finding something that will do this.

[@asharma9345]

Keep it Up Bro. Nice Design and Concepts

[@skapi__1724]

That looks great! I was looking for something that I could use to heat up my tent a little in winter, do you think that could work? I don't expect to have 30*C in there but having 0*C while there is -10*C outside would make a big difference.

[@abyssunderground]

Not nearly powerful enough, but it could keep your hands warm.

[@skapi__1724]

@@abyssunderground Ok, my PC with 400W power draw definitely makes my room warmerm when playing games so I was thinking that 200W heater can heat up small tent just a bit :P

[@abyssunderground]

@@skapi__1724 that's still air with little ventillation and the room will be insulated. A tent isn't either of those so you'll find it won't make a difference especially at negative 10 where heat loss is much higher.

[@TimeFadesMemoryLasts]

What would be more efficient is an electrical heating blanket that you put inside of your sleeping bag. That might work beautifully, especially because the blanket is isolated from heat loss due to the sleeping bag and the heat is right where it needs to be.

[@luislugo2546]

Could this be used as a filament dehydrator, changing housing?

[@aldodu4475]

Evidemment en modifiant légerement le STL

[@keylitho]

Awesome... I just bought stuff for a similar project a few weeks ago..

[@JohnReyReños]

how many hours the battery could run this unit?

[@Yonbii91]

The relay you shared is no longer available. But if I connect a 12v power supply, do I still need it, can I do without it?

[@JumpscaresIncluded]

Amazing video need to build one for my resin 3d printer.

[@Yonbii91]

Could I use it inside in ikea closet? Is it safe? I would like to use it to heat the filaments

[@Quantum-c7l]

Does coils heating up on dc voltage?

[@youham7066]

very detail and nice video!!!, thank you so much. I'm trying to use a air heater in my project. Can I control ptc heater using a relay and microcontroller (without thermal controller)?

[@thedanishmaker9490]

I try to expand my electrical skills and knowledge… What is the purpose of the relay in this situation? Isn’t that build into the stc-1000 temp controller?

[@Mario-ud2xj]

the purpose is to turn the heater on and off. there are some thermostats that will have a switch in them. but most don’t and even if they do they are not very powerful

[@aldodu4475]

Si mais il n'est pas assez puissant pour le PTC ( regarder la vidéo de nouveau)

[@nirius-wipeout5579]

I'm trying to build a filament dryer and wanted to use a similar system, what maximum temperature were you able to reach?

[@erdemokkes]

why didnt you use 30a controller

[@santhoshkumar-pw8pb]

Awesome 👍

[@MyYewTubeAccount]

No solder on crimps, it defeats the original purpose of crimping and using connector's.

[@Personnenenparle]

For higher power applications, adding solder to crimped joints will reduce the resistance and prevent heat from building up there. It can increase the risk for metal fatigue when theres a lot of vibration, but thats not really the case here.

[@dimarusful]

I kind of messed up and picked up all the wires and switches under load, and as a result, not only did the digital thermal relay itself jump right next to the hot air from the exit side, but also put it in a closed case, it's so stupid dude, all your efforts are completely crossed out by such a stupid and dangerous design.😮

[@ElectronicRemote313]

I need to buy a Frigidaire window heat pump

[@Quantum-c7l]

Please make a dc room heater. Which can consume low dc voltage but should provide good heat.

[@jerbear7952]

Please break the laws of thermo dynamics

[@buas7]

what filemant did you use

[@Chris-okf]

He used ABS

[@cees9314]

Nice!

[@walterhynson2898]

Your ideas are good however please take a soldering course as melting a blob of solder on a wire does not get it and once you take a soldering course you will learn why.

[@centurytechgarage3000]

That switch is not rated for DC use. Only for A/C use. Please find a different switch before it melts and possibly catches fire

[@2020525142152]

Switch ain’t going to melt

[@dr.emmettbrown8466]

Cool design, BUT 3h 13m for 30C in little plastic box??!!

[@itako6593]

Uhhhhh... U sure bout that chief?

[@GreenFeace]

3 mins 13 secs