Making a Simple Bifold Wallet with DTG Printed Lining plus Free PDF Pattern

[@nobracobra]

tyfs i feel im redeye to incorporate material linings or inlays. sooo much fun!

[@donnaroberts164]

Nice project!! What size ounce leather did you use???

[@jasongomeztheicecreamman9271]

I don't know if you'll see this but thank you for this simple,yet elegant, pattern. I like to also share my method of glueing larger areas. I use an old gift/ credit cardn cut the edge with pinking shears and ude that to spread the glue,works great for me. I also lined the back of the card slots to ensure the cards won't catch on any of the worn bank notes. I really enjoy your videos, thank you.

[@fantim]

What lining did you print onto? What was the materia?

[@ifef376]

Hello! What is that white liquid you apply to the backside of the leather?

[@leetomlee7265]

thanks for sharing. what kind of glues are you using? I do not see it in you material list in Description. Can you provide me the name or link I can purchase?

[@johnnyc.5979]

I thought you guys were some struggling leathercrafters from the Philippines until I saw that DTG printer...I can't even afford that.

[@oanhieu5057]

just my opinion, u should hammer your thread and use edge creaser to make a crease along the edge. it flatten your sewwing and make the edge look nicer. Anw, great wallet, very clean.

[@roseleathercraftsph]

I acknowledge that many crafters are greater than what I do - and there are vast techniques. But to me there's no right or wrong in crafting as long you get to enjoy it and finish it - it all boils down what style you settle with. Personally not a crease guy, but I have nothing against it too.

[@OnderKiremitci]

it is beautiful fabric background I really love that, thanks for the pattern great work

[@roseleathercraftsph]

Thank you! 😊

[@MichelCossettek7]

TJRS DE BEAU PETIT TRAVAIL BRAVO

[@lingshen]

A simple,and useful wallet👍

[@macjamestumbiga806]

Simple lang pero astig 👍

[@roseleathercraftsph]

salamat boss!

[@Sam-gf1eb]

This is the way.

[@leonmorgans4250]

Lovely. Nice and clean looking. One question what is the punch you used for the corners?

[@roseleathercraftsph]

Thank you! It's a Kyoshin Elle Corner punch with 2cm radius :D

[@magdahurtado3187]

Me gusta mucho sus trabajos bien práctico que tipo de cuero usa para las billeteras gracias

[@roseleathercraftsph]

Thank you! I use vegtan leather for my projects :) (via google translation)

[@elainesilva1966]

Thank you for this tutorial! Good work!🇧🇷

[@TheTryHardDad]

What glue did you use?

[@eliasalvespereira007]

beautiful wallet that glue that you use and base of water pva?

[@roseleathercraftsph]

Thank you! yes it's water based adhesive for leather :)

[@eliasalvespereira007]

@@roseleathercraftsphthank you very much friend

[@carlo.738]

Out of curiosity, why did you tack the liner cloth around the edges instead of fully gluing it down?

[@South711]

great job and nice printer)

[@roseleathercraftsph]

Thank you very much! :D

[@mohamedoueslati933]

Hello ! im from tunisia ! can i use your pattern as a way to make wallets and sell them?

[@andremaxmo1682]

Congratulations, a beautiful job 👏👏

[@roseleathercraftsph]

Thank you! 😊

[@dozerman53111]

looks great !!

[@roseleathercraftsph]

Thank you! Cheers!

[@MoreLifeD]

Hello thanks for sharing Great Video .I have always wanted to lnow about linimg fabric to leather. Would you be able to tell me which adhesive you ate using please. Debbie

[@roseleathercraftsph]

Thanks for watching! I just used a water based adhesive for leather :)

[@justray510]

Any issues with the fabric coming loose or anything else at the fold point?

[@AJ-bi6ru]

Wow! Love the design. What is the stitch length you have used?

[@roseleathercraftsph]

thank you! I just measure the thread length around the design and then multiply it by 3 :D

[@AJ-bi6ru]

What I meant was the pricking iron mm.

[@roseleathercraftsph]

The spacing is 4mm for the pricking iron 🙂

[@canaldigarlette]

Parabéns, você fez um bom trabalho. Muito lindo.

[@roseleathercraftsph]

Thank you!

[@virgilstewart4487]

Awesome job! If you wouldn’t mind telling what type of fabric did you use and what are the model numbers or your machine?

[@roseleathercraftsph]

Thank you! The DTG printer is called Ricoh ri100 and it prints on cotton 🙂

[@eliasalvespereira007]

Resolvi perguntar em português tbm essa cola a qual vce usa é a Pva a base de água?

[@nelsonhoofardable]

What glue did you use for the fabric?

[@roseleathercraftsph]

I used a water based glue 😁

[@beepIL]

You left the paper bill there in the middle to hide the wrinkles on the lining right? :P I found that to avoid it, you can leave the very thin line of where the wallet folds without glue, if everything around it is with glued, and only that tiny line at the fold is not glued, it will still remain close and tight to the leather, but since it is not directly held by the leather at the folding line, it will not wrinkle when you fold or unfold it.

[@Handles-R-Lame]

I disagree that's not how you should do fabric lining neither. You do exactly what he showed in the film, except for the drying part. You use a form to keep the wallet in a folded position while the glue dries. This way the wallets lining is dried already folded which makes for no crease. Make sure all air bubbles are smoothed thoroughly before letting it dry too. It's the best way in general to do fabric lining.

[@lowspeak]

I just realised after all this time, your logo is actually a rose 😁

[@roseleathercraftsph]

Yes! It's our rose logo 🌹

[@bazlur-Vancouver]

DTG printer is expensive. Good for who does commercial Printing. Looks great. It was great if each side had at least 2(3)slots. what kind of cloth used for Printing. You have good pricking Iron, but the stitching little bit not perfect on the coverside. If the last stitch comes out down the loop, not over the loop(as you did), it looks great with angle.

[@roseleathercraftsph]

For this particular design I wanted to show the dtg print for the wallet. For other bifolds I have those covered in other videos 🙂

[@FUBARguy107]

Alright. No one else noticed it. The pattern for the liner is the same as the carpet from the hotel in The Shining.

[@davidjrazeghi3248]

This is beautiful! What kind of fabric did you use for the lining? And what kind of glue did you use for it as well. I want to try this but I'm afraid that the glue will go through the fabric and look weird (wet and hard) if I use the wrong type of fabric or glue. Thank you!

[@roseleathercraftsph]

Thanks for watching! with DTG printing it can only print on 100% cotton fabric. Other fabrics will work too as a lining. For this wallet I only use my water based adhesive for leather hope this helps!

[@tigerzuri9547]

What is the thickness of the sheet you use to print your pdf patterns❔😉

[@roseleathercraftsph]

It's around 180gsm :)

[@alexnesterenko4058]

Попробуй пробивать изделие не до конца с каждой стороны. Будет шов красивый внутри и снаружи изделия.

[@Alex-Jmz]

👏

[@ManSha108]

that's not the way you hold that knife.

[@manwithamission9809]

i see mandalorian visor

[@roseleathercraftsph]

Can't unsee haha :D

[@nescafe1513]

S U P E R & S U P E R - V I D E O ) ) )