Рет қаралды 45,765
I Make a Soap Cutter for @ezervanna. The soap cutter is designed to cut large 600 x 400mm blocks of soap into smaller pieces. The cutter is made from plywood and uses 700mm full extension ball bearing drawer slides, guitar wire and guitar tuning pegs.
/ wrkshop71
/ ezervanna
To access the free project tutorial for this project and others from my Channel. Visit the link below:
wrkshop71.com/project-tutorials/
Materials list
---------------------
18mm Laminated birch plywood:
2 pcs 250mm x 230mm
1 pce 552mm x 135mm
1 pce 414mm x 50mm
15mm Plain birch plywood:
1 pce 552mm x 55mm
1 pce 900mm x 516mm
2 pcs 725mm x 50mm
1 pce 750mm x 513mm
1 pce 600mm x 30mm
1 pce 414mm x 35mm
2 pcs 640mm x 50mm
1 pce 554mm x 250mm
2 pcs Ball bearing Draw slides 700mm full extension sliders.
1 pce of 7mm nylon cutting board 380mm x 25mm (The thickness can vary depending on what is available in your location)
4 pcs Electric Guitar tuners (These are just generic tuners I bought off aliexpress)
4 steel electric guitar strings PL016 or PL018 which are 0.016 inches and 0.018 inches in diameter which in mm is 0.41 and 0.45 respectively.