Making a Steampunk Lighter "Barrel"

Hello
In this video you will see the whole process of creating a brass lighter. From start to finish, I'll show you every step of the process, from drawings to final assembly. You will see what tools and techniques I use to work with brass.
Happy viewing friends.
Support me for more videos and request for drawings and other information: www.patreon.co...
Website: banjo-show.com
More information about me: linktr.ee/banj...
Link to the product: banjo-show.com...

[@wbover]

Missing so much time! Great seeing your creations again

[@BanjoShow]

Thank you!

[@Sergey-qz1cp]

Благодарю за творчество,и классный контент!!! Зажигалка огонь) Жаль что в последнее время так мало новых видео на канале( Привет с Харькова!

[@FZR650]

It’s good to see you back online! Amazing lighter!

[@epicflicks7657]

Bro finally remembered he has a channel

[@johnphilippatos]

You say it like it is mandatory to upload a video every other day. Some of us have a life, you know. I mean, life outside the web that is, does it ring a bell?

[@BanjoShow]

I understand you, but unfortunately not everything depends on me. Thanks for waiting.

[@epicflicks7657]

@@johnphilippatos no I didn't say it in a way that it's mandatory to upload daily, I said it sarcastically. Some of us love his work and want to see more of it so🤷🏻‍♂️

[@johnphilippatos]

@@BanjoShow Άστον μωρέ, ένας ένας απαιτητικός, λες και το πληρώνει το KZbin από την τσέπη του....

[@johnphilippatos]

@@epicflicks7657 Ok, got it. But you've got to admit, it's quite easy to misinterpret your words the way you wrote them, especially when English ain't someone's mother tongue. Take care.

[@eddietowers5595]

Hey, nice to see you back with yet another amazing project. Hope all is well with you and yours.

[@veiserexab1428]

Good to see him again making new videos

[@sajidahmed1570]

It's good to have you back!

[@jackwriter1908]

Ah, yes another video that proves to me that my time having to file on a metal piece for four weeks, could actually help me accomplish awesome creations... if I would actually do something with it... It truly looks amazing!

[@simonosborne3047]

Beautiful work. Good to see your channel again.

[@АнтониоПетров-я7щ]

Дорогой Брат, бесподобная получилась зажигалка!!! Очень красивая и стильная!!! Зиппа просто нервно курит в сторонке!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺

[@sakosniper338]

Убери из комментов трёхцветную тряпку, ничтожество!

[@theodoretzioras2230]

You are gifted!!! You did the impossible!

[@keitholdham5559]

Oh my. Nice equipment upgrades!

[@tfildaed]

Wonderful to see your work again!

[@peterjozsef448]

Awesome to have you back, we missed you

[@MCsCreations]

Stunning lighter, dude! Truly amazing work!!! 😃 Stay safe there with your family! 🖖😊

[@MrGregorescu]

welcome back, missed your projects, this looks awesome!

[@BanjoShow]

Thanks!

[@esthete_maroquinerie]

What a job ! What a patience ! Awesome project @Banjoshow as always !

[@BanjoShow]

Thank you!

[@calolson9572]

Love this project! And as always, I so enjoy your videos!!!

[@tariknembhard]

Welcome back Roman! 🎉 I can’t believe that this video didn’t show up in my feed. You crossed my mind so I decided to check & wow what a surprise. I hope that you’re feeling great. Nuff love & respect from 🇯🇲 👊🏾

[@BanjoShow]

Thank you bro!

[@luckyrabbit4355]

Good to see you back

[@sayfusdeeas1438]

Давно не было новинок и первые десять минут немного офигел от ЧПУ. Зато потом опять старая добрая пайка, сборка и наведение лоска. И в результате отличная вещь.

[@MrLombrose]

I miss your videos, thank you!!!

[@BanjoShow]

Thank you too

[@DarkMAP95]

La espera valio la pena, excelente trabajo. Un gusto tenerte de vuelta.

[@romycake3995]

Impressive, you are a genius 👏👏👏👏

[@Makebuildmodify]

Welcome back!!

[@Smokeybeesnatural]

Much better than a Zipo 😎 AWESOME!

[@BanjoShow]

Thank you!

[@johnmccanntruth]

Very cool design, looks great!

[@andronikilampropoulou7030]

So good to see you again ! Amazing job !!!

[@BanjoShow]

Thank you.

[@dougidoug]

Looks fantastic. You have quite an impressive looking lathe.

[@alexandrsherbakov9878]

Прекрасная работа, респект.

[@lisag2771]

Absolutely amazing work!!!

[@mixalis9221]

Ah, he is back 😭😭😭missed you so much

[@MiguelDeMarchena]

That is a master piece.

[@joegob100]

This is beautiful

[@durandanne-john6621]

Ça fait vraiment plaisir de vous revoir sur KZbin ! J'espère que vous allez recommencer à poster des vidéos régulièrement comme autrefois ! Avez-vous une boutique dans Athènes ? Continuez vous à faire vos horloges steampunks de folie ? Bon retour sur KZbin.

[@sfg4562]

Un encendedor precioso gran trabajo, magnifico.

[@uweploeger511]

A masterpiece of art 👍

[@НиколайЛегков-д7е]

Красота,как и всегда 👍😃

[@Smallathe]

Very cool... Looking forward!

[@В.В.Д]

What a beauty !

[@zadarik]

Супер! С возвращением!

[@aselkurama327]

love steampunk!!! more videos ❤

[@ОлексійБургаз]

Доброго дня! Дякую за цікаве відео!

[@BanjoShow]

І вам дякую!

[@PeterNetped]

[@MASI_forging]

Bravo. Such a great work.👍👍

[@katiebellmichelle]

We missed you! 🥰🤩

[@YooProjects]

Great project mate!

[@youflyifix]

Glad to see the show back, sad its all CNC now.

[@mj7195]

I'm thinking of starting to smoke again just to get a lighter, great work.

[@ianvicedomini2648]

Great to see you back and this creation is super cool. Nice work buddy 👌👍🏽🏅

[@BanjoShow]

Thank you.

[@kamsubhani8565]

Welcome back. Had been waiting....

[@axionx5460]

That was amazing.

[@Hans_Blitz97]

Another nice project, thank you for new video, it was long time 😎👍

[@Sniperbullit.]

Yeah finaly he is back

[@stephentv6203]

thank God he has a spare time to make this video.

[@BanjoShow]

Yep, thank you!

[@steph..4861-r8x]

Super de revoir tes créations👍🏻👍🏻

[@madwilliamflint]

Oh yeah. I need to make this.

[@cent1llion]

Welcome back!

[@tonatiuhsnellparra3133]

Love Steampunk

[@VaGab]

Very impressive

[@ImTheReal]

Welcome back 🙌

[@mouradabdi2207]

😀 content de vous revoir, et beau travail comme d'habitude 👍👌

[@BanjoShow]

Thank you.

[@romskiy8489]

Ну наконец то дождались))

[@carrestore]

Beautiful Beautiful 😍😍

[@petrfokin4575]

Наконец то появился...с возвращением...

[@josja3454]

Sehr geiles Video! Danke dafür❤

[@dfn808]

Awesome!

[@Иван-к1х1и]

Обалденная зажига.

[@Smallathe]

Very cool!

[@jamess1787]

Thanks banjo!

[@BanjoShow]

Thank you too.

[@juancarlosrosati832]

MUY BUEN TRABAJO (CON ESE TORNO NADA PUEDE SALIR MAL . . .)

[@Mr.Riffer]

Я думал ты нас бросил)) не пропадай надолго!

[@aserta]

8:35 so you don't mess the face of the plate, you should clearn it up with a tool path and glue a plexiglass sheet on top, with all the holes needed, that itself then gets zeroed out. If you get a thicker piece like say 8 mm thick, that's gonna last you a long time, and plexiglass is very stable. Two part contact cement is good, because heat will release it super easy once you've chewed through. IMO, the height loss is negligible compared to having to eventually replace the plate, plexi is cheaper.

[@BanjoShow]

Thank you!

[@anandarochisha]

Wow..now you have to teach it to make you breakfast !

[@Printescustom]

Você voltou a 🎉trabalhar 🎉🎉 Brazil

[@LaserGadgets]

I tried copperchloride for cleaning brass parts, but it turns the surface to copper. Any advice?

[@BanjoShow]

I think you are using too strong a solution or keeping the part in the solution for too long. You also need to understand what you are using chemical cleaning of brass for. If you are doing this to patina later, then fine, but if you want the part to shine and keep its shine for a long time, then chemical cleaning is not suitable for this, rather, on the contrary, the part will darken very quickly. To make the part shine for a long time, you need to use polishing pastes with wax additives or, after polishing, paint the brass with a transparent two-component automotive varnish.

[@LaserGadgets]

@@BanjoShow In some of your videos, you see bubbles rise very quickly. Shine is not needed, I just want it uniform and look "all the same" like yours :p I see lots of bubbles and then it looks all clean and matt.

[@Muckylixx]

thx god... a new video🎉🎉🎉

[@loicwacziak]

he is BAAAAAAAAACK !!!!!!

[@Bakhamaster001]

Өте керемет шыққан өнерін мықты екен

[@badassfood5713]

You and Chris over at clickspring should collaborate on a build!

[@the_once-and-future_king.]

Nice!

[@radder76]

Шикарно!!!

[@romeovidalrodriguez7754]

hola el video está muy bueno Excelente: 🤜🤛👍👊💪👌

[@mozart965]

Amazing design! I see the o ring on the fuel cap, is there one on the snuffer cap as well? How long does it hold fuel when not in use?

[@JMWexperience]

Sweet!

[@Certawin]

Nice work on that lighter. Silly question, mind me asking how many hours it took? From start to completion.

[@BanjoShow]

Thank you. After I had the idea of this lighter, I started working on a 3D model on the computer, which took me about one week. For about 5 days I made parts for the prototype, after which I made some changes in the design and methods of making parts. Then I made a second copy of the lighter with changes in 3 days. In total, I got about 15 days. Now to make a lighter from the beginning to the end, it will take me about 2 days. If you shoot a video and make a lighter, then this is a very long process; this video took me 8 days and 2 days of editing on a computer.

[@Certawin]

@@BanjoShow wow, well the end product turned out great.

[@HeretikLeathercraft]

Finally, new video! Awesome job, as usual! You start using CNC lathe?

[@BanjoShow]

Yes, I'm still studying it. Thanks.

[@keksiu351]

Wiedziałem że warto subskrybować i czekać :⁠-⁠)

[@GabrielLong-zm3er]

Why don’t you upload as often is it hard to find ideas are you experiencing burnout or is other stuff in you life affecting you making videos whatever it is glade to see you back and take care.

[@BanjoShow]

I already wrote about this somewhere, but I’ll repeat it again for you: in March 2020, my Google account was hacked and they gained access to a KZbin channel that was linked to this Google account. To regain access to the KZbin channel, KZbin support could not come up with anything else but to completely delete the KZbin channel, and then give me the opportunity to link a new Google account to the restored KZbin channel. As I was told by support, deleting a KZbin channel and then restoring it deletes the entire history and character of the channel. From the KZbin platform, as well as a very large number of subscribers were untied from the channel, that is, by the numbers they are subscribed, but notifications and my videos are in their feed not shown. And it turned out that I got access to a KZbin channel, which the KZbin platform itself considers as a newly registered KZbin channel that cannot be trusted with 450,000 subscribers who do not see my videos and of course my videos are not promoted in any way. As you can see, all my subsequent videos that were uploaded to the KZbin channel do not have such a number of views that would be comparable to the subscribers of this channel and all my videos that have more than 100 thousand views are those rare cases when I contacted support with my problems and they did something there and the views grew a little more. I’ll explain why I’m saying all this: in order to shoot a video, I need to completely close the workshop for the duration of filming the video, which is about 2 weeks, and only do video shooting, which means that I will not be able to fulfill incoming orders. When the views on the channel were good, the profit from the KZbin channel compensated for the time when I did not fulfill orders. Since now the KZbin channel does not generate any significant money, I cannot simply shoot videos as a hobby, renting a workshop, paying workers, and many other expenses simply do not give me the opportunity to shoot videos for my pleasure. Therefore, filming videos for a KZbin channel occurs only when I have at least a little free time and it’s all out of pure enthusiasm since it doesn’t bring profit. I am planning to make videos for KZbin, but I have not yet found a solution on how to do this.

[@technocraftSTUDIO]

Hello sir, what materials you used to join all the parts together. Are they soldering wick and what those jelly type thing you used before applying heat torch ?

[@arnab953]

@my mechanic..... I really don't know how many followers you have from India but I am a die hard fan of your work. I have never seen anyone to make a perfect product ever in my life... I tried to buy one of your lighter however unfortunately I am from a really poor family and I don't have that much financial support that I can purchase it. If there is any other way available ilto buy it please let me know...I really want to have it

[@Muckylixx]

i would really like to have/buy/see a steampunk vape... that would be awesome... in my case... i love my Geekvape Aegis Legend😉

[@aserta]

7:42 heh, so i'm not the only one who uses old apple boxes to store scraps. :))

[@spikesforge9000]

Be nice to have one made from a 50 bmg casing

[@joesask857]

nice

[@frantisekcizek5268]

I would like see steampunk absinthe fontain

[@rashidkhokhar7897]

Sir this lighter how many cost Please 🙏🏻 tell me ❤

[@Hollywood4Fun]

What was the liquid bath that aged the brass?

[@MSNsee4d]

What is this cnc machine you are using? Looks mini...

[@BanjoShow]

I would not say that this machine is small, since it takes up a decent place in my workshop, but when compared with industrial scale machines, then yes, compared to machines in production, this is a very small machine. Machine model: EMCO 120

[@alexmann9310]

Как пишут в комментариях на ПорнХабе:"лайк не глядя" )))

[@BanjoShow]

Хаха, спасибо!

[@alexmann9310]

@@BanjoShow хотя, видео получилось немного... суховатым, что-ли... станок выточил, станок просверлил, станок отфрезировал... Надфиля не хватает) Но времена меняются, темп жизни всё быстрее, надо это принять как данность...