Making a Triskelion.wmv

[@mirrortoyourweakness9769]

Simple, straightforward, without tons of extra minutes of talking about something else.. excellent video! Thank you very much

[@markirish7599]

Fantastic video. Best wishes from Ireland ❤🇮🇪

[@theunapologeticiconoclast]

Could you please post a comment about the significance of the triskelion energetically? Thank you!

[@Robreehl1]

Thank you so much. This is the perfect video..short, to the point, extremely informative and smartly done.

[@marianesugihara2881]

Thank you for sharing freely. Many blessings.

[@MichaelJONeill333]

Best triskelion making video ive seen. thank you my friend, i made a couple already 😄

[@angle6427]

Thank you so much you made this so easy than other ones I’ve watched ! Bless -you 💞

[@mssavedin92]

this is by far the most simplest method I've seen yet. Others clamp the middle bend, then bend one wire to the right and another to the left and then begin rolling. Yours is so much easier to understand and do.I'm using 18 gauge copper wire and I start with the needle nose pliers on each initial first roll, then can finish rolling each wire by hand. Pretty awesome, going to make a bunch now.I've got one under the cats waterbowl, I hear they help structure water?

[@dancingwithwater]

Glad you found this helpful. Yes, they do structure water. Read the article on triskelions here: www.dancingwithwater.com/triskelions-ancient-and-modern/

[@suzanneneamtan6352]

Many many thanks 😊 of all the how to videos I watched, your video is the first one that was so clear I “got” it immediately 👏👏

[@Scoutii]

I want to learn more about the paramagnetic rock powder and tube combination with the teskalion,

[@dancingwithwater]

Here are links to more info on the concept of using paramagnetics to influence water ...and the crystal tubes. Triskelions can be used alongside for further energetic enhancement. dancingwithwater.3dcartstores.com/Paramagnetic-Blend_p_55.html dancingwithwater.3dcartstores.com/Quartz-tube-with-cork-stoppers_p_75.html

[@CraigTheCreator]

Great lesson. 20.6 inches is the sacred cubit length thx for the reminder. Gotta make a bunch of these for Orgone Pyramids I'm building.

[@MsGreenmermaid]

How you finding makng the orgonite? Is it any good? I heard its the pressure created by the resin that concentrates the energy 🤔

[@NapalmNetwork]

​@@MsGreenmermaidcheck my page I made an Orgone Cannon and it dissipates Chemtrails instantly!!

[@tristani_om]

You sound like Ripley from the Alien Saga, love it.

[@josebarbosagarcia550]

20.6" inches to what i understand is the Sacred Cubit length, which it's frequency is 144MHZ. Not my data

[@Amanda-h1x]

So what is the right length then? Right MHZ is 432 , do I understand it corectly?

[@josebarbosagarcia550]

@@Amanda-h1x 20.6 inches but you can fraction or add by 1/2 and 1/4’s

[@Scotty432]

Nice job.is there another length measurement if you were to a thicker solid copper wire. Thanks

[@SPHINXORMUS]

Hello Is the direction of the coil matter in each of the different hemispheres .? Does this apply to vortexing water also , what happens to water if you vortex the the wrong direction tk the sink plughole direction . Thank you

[@dancingwithwater]

Direction does not matter. If you turn the triskelion over you will see that it winds the opposite direction. So both directions are represented.

[@DianaPaez713]

Thank you kindly! It took about 2 tries for me to get it right, but I got it and it looks so cool! Awesome video

[@mskytube]

I'm new to all this....what do you do with the spirals once you've made them?

[@dancingwithwater]

Here's an article on how to use them to energize water www.dancingwithwater.com/triskelions-ancient-and-modern/

[@mskytube]

@ ....So these aren't something to wear? Thinking about it now, since we are made up of water, would wearing them energize us too? They are so beautiful! Thank you!

[@dancingwithwater]

@@mskytube Lots of people wear them for jewelry. Pendants, earrings etc.

[@paijoroyoroyo4332]

Can we use it for pendant without resin?its stilll efective

[@dancingwithwater]

Yes, It would make a nice pendant

[@paijoroyoroyo4332]

@@dancingwithwater thanks

[@Coldx7-q9v]

does mm of copper wire matters while making this thing?

[@dancingwithwater]

You can make it using any gauge wire.

[@jennyleetaylor1727]

Great video. Do you recommend square or round copper wire? Which is easiest to roll and is there any difference energetically? Thanks

[@dancingwithwater]

Round wire is much better for the even flow of energy.

[@ruanmccready5299]

aWESOME.I live in Ireland. I luv them! We have them carved into our ancient monuments here. also associated with saint bridid, the triple goddesss :-) I tried making one but my pliers are marring the wire. Do u know why? mite it be the tools arent good or the wire? thankyou

[@maryshear5450]

You could try using nylon jawed pliers too. That will help with marring

[@medicineheartds9631]

Try wrapping your pliers with tape if you don't want to buy jewelry pliers.

[@charlesborders2893]

YES CAUSE YOUR A APECK HEAD USE YOUR INTUITIONIT. IT KNOWS EVERTHING. IT'S DNA CIRCUITRY IT IS PRESCRIPTED IT'S ALL IN THERE, IT'S LIKE YOUR CONSCIOUSNESS YOU KNOW,. YOUR KNOW ALL, SEE ALL CIRCUIT BOARD .TO YOUR BRAIN TO MASTER THE ART OF REASON OF RIGHT WRONG ,AND MASTER SKILLS OF COMPLEXITY. YOU KNOW JUST THINK CUP CAKE ,THAT MEANS USE YOUR MIND, IT IS FOR PROBLEM SOLVING . NO BODY DOES IT ANYMORE ! OH PECK ! HEHEHHE .THAT DON'T REFLECT ON IRELAND- THOW

[@MsGreenmermaid]

Just saw another guy from Ireland here as well as myself, we must be drawn to it! 😂😂

[@weedyganzalays]

Thanks so much for this great video! Exactly what I needed! I was just wondering, what can you do about the little dents and marks left in the copper from the needle nose pliers? Thanks again!

[@dancingwithwater]

They make jeweler's pliers with plastic where most pliers have "teeth". These do not make marks in the wire -- that's what we use to make them.

[@charlesborders2893]

WRAP TAPE AROUND THE NOSE OF THE PLIERS ELE-TAPE WILL DO

[@js1420]

Does the length of my wire stay the same, no matter what gauge of wire I am using?

[@dancingwithwater]

Length is important. There are a number of lengths (referred to as cubit lengths by Slim Spurling) that carry powerful resonances. Watch the video on Tensor Rings and Slim Spurling to gather more info on cubit lengths: kzbin.info/www/bejne/qnq8coOQacl-Y80

[@Ramsi-Berlin]

Nice ❣️👍🏼 Love from Berlin 🇩🇪 Ramsi 🙋🏻‍♂️

[@unoffendable3496]

Is the length of the wire set in stone?

[@dancingwithwater]

No, but there are certain lengths that resonate a frequencies more harmonious to organic life and to our human bodies.

[@unoffendable3496]

@@dancingwithwater I remember reading somewhere that the length between your wrist and your elbow is a cubit. Maybe they were closer to nephilim in size and that was the length of the inside of their arm

[@KawakebAstra]

Fabulous Feminine Energy Frequency Angel THX 🙏💫💦💫♥️🕊💛🌳🍃🕊

[@alancarpenter-se5xp]

Can you purchase these directly from your site, just wondering MJ❓❓

[@dancingwithwater]

Yes... we have several different sets in the category "energetic enhancements" here: dancingwithwater.3dcartstores.com/Energetic-Enhancements_c_19.html

[@alancarpenter-se5xp]

@@dancingwithwater Thanks MJ, appreciate it 👍

[@marinadesimone7874]

Good afternoon, if I use 12 gauge copper wire, does lenght have to increase or remain the same? Thanks a lot, Stefano

[@dancingwithwater]

Length is the important aspect. You can use harmonics (for example 1/2 or 1/3) if you want to maker larger or smaller.

[@marinadesimone7874]

Thanks for the suggestion, and have a good evening. Best regards, Stefano

[@kvs-adonai5214]

The spirals are all supposed to be clockwise to allow the energy to travel correctly…from what I’ve been told by others in this field…

[@dancingwithwater]

spirals are dependent on perspective. turn it over and the direction is reversed.

[@ParamormalEnigma]

This is the best video I have seen simple to the point I made like four of them tonight I thank you for this video❤

[@Imeandicecream]

What is it used for

[@dancingwithwater]

Read the article here on triskelions: www.dancingwithwater.com/triskelions-ancient-and-modern/

[@MEscribbles]

Do you find that the cubit length is better than the royal cubit?

[@dancingwithwater]

There are many different lengths that create beneficial harmonics. Each with a little different focus - so depends on your intended outcome. For water, we really like the cubit length we discovered in 2015 which we call the Earth Resonance cubit; it resonates with the core of the Earth and it really nice for structuring water. You may read more about this in the article we have online about Tensors Rings: www.dancingwithwater.com/rings-and-tensor-fields/

[@MEscribbles]

@@dancingwithwater thank you! I will check it out. I guess my intention is to have overall vibration balancing

[@opheliavandervelt651]

For what do you use these?

[@dancingwithwater]

There is an in depth article on the website here: www.dancingwithwater.com/triskelions-ancient-and-modern/

[@Shadowfax69]

Is there a 3 wired way?

[@dancingwithwater]

It is the same process; just begin by twisting 3 wires together to form one length of wire

[@talktoeric]

How close to perfect does it have to be in order to work?

[@infinitesimotel]

The more perfect the better, also for aesthetic reasons. If it is a bit wonky it is ok, but no drastic distortion. Think of it like magnetism it leaks on sharp corners and angles around 90. So don't wind a square spiral ;-) Keeping the spacing even and as round as possible is your best focus. Just go slowly and as it grows move your fingers where you hold it out or it distorts as it gets bigger.

[@NigelOConnor-o3e]

I see you are rolling it anti clockwise, does this matter? I thought/read somewhere it should be a clockwise rotation?

[@dancingwithwater]

If you turn it over, you will see that it goes in the clockwise direction. Both directions are represented and you can place whatever side you want toward the water.

[@Yourhighnessnona]

What is it for?

[@adorasau]

Sokarijo.Diaries Ways to use a triskelion:Structure and raise the vibratory frequency of water (place a triskelion on/in a water bottle, pitcher, or other container)Protect water and biological organisms from harmful electromagnetic fields (place a triskelion in your pocket, on a necklace or bracelet, on an animal’s collar, or on your water vessel)Protect the programs/imprints in water (place a triskelion on your water vessel after programming/imprinting)Energize salt solutions (place a triskelion on/underneath your salt solutions)Enhance plant growth (hang a triskelion from a tree or bush or place it on the soil near any plant)Cleanse crystals (Place a triskelion in a glass of water with a crystal and leave several hours or overnight)

[@CraigTheCreator]

@@adorasau wow it does all of this 👏 😍 🙌 😳 such an amazing energy tool 🔧 👏 🙌 😍 👌 🙄

[@unoffendable3496]

The length of a Cupid seems to vary with different schools of thought

[@zzausel]

Thank you. By the way I think the two free ends have to meet.

[@dancingwithwater]

You may be interested to watch the energy movement in this triskelion and to read the article here: www.dancingwithwater.com/triskelions-ancient-and-modern/

[@zzausel]

@@dancingwithwater I don't agree in separating male and female interpretation but I love this structure and its vibration

[@TatianaDruckrey]

How do I measure 20.6 inches? Inches don’t come in measurements like that. Is it 20 5/8?

[@dancingwithwater]

To convert a fraction to decimal you divide the numerator by the denominator. So, 5 divided by 8 = .625. This means that 20 and 5/8 is slightly more than 20.6 inches.

[@sr-fw7xk]

Amazing! I did one in the first try :-) what is the book you talk about? Thanks

[@dancingwithwater]

The book is called Dancing with Water. Here: www.dancingwithwater.com

[@adol_6866]

Felicidades!!! 🙌🏻

[@birumutturyasamak8874]

Kaç cm tel lazım?

[@alicepopkorn]

thank you for this great tutorial !!

[@erdontcarebear140]

Thank you 💗💐

[@sobizzr]

Hello dancingwithwater, if we make it with magnet wires/ insulated wires, will it make any difference in the energy flow? I made a few of these for gifting and in my resin orgone devices, next to or randomly with sbb coils. To me, 😇, having these in my wallet or pocket together with 1/4 sacred cubit ring , I felt like a man on steroids. Lol. I haven't made one from insulated/ magnet wires though. Thanks for the tutorial. 👍

[@dancingwithwater]

Insulated wire - not the best as it will dampen the effects. You will still have the energetics of the symbol, but not the transmission of energy via exposed, conductive wire

[@redbossman]

What is the width of the wire?

[@dancingwithwater]

Here is a link to the diameter of the different gauges of wire; www.rapidtables.com/calc/wire/wire-gauge-chart.html. We used 14 gauge wire for this demonstration (for ease of working) but our triskelions are made with 12 gauge wire. Remember that when the gauge number goes up, the diameter gets smaller. 14 gauge copper wire is about 1.6 mm.

[@redbossman]

@@dancingwithwater thx

[@Kavatar_AwakeningBlueLightning]

I have a bunch of questions about this. I'll ask some now and ask the rest later. First is where do we get the golden and silver coated copper wires in order to make triskelion thats coated with different metals? Second I noticed there's a feminine and masculine charge triskellion. Where one is more masculine and another is more feminine... The masculine one seemed like it had divots and grooves. Well how do we make those special divots and grooves if we're going to make 2 different triskelions. One thats a masculine charge and another that's a feminine charge? Is there a special website to order our own wiring that will specialize in creatively making these different types of smaller, larger, and other coated metals trikellions?

[@dancingwithwater]

you can purchase gold and silver-plated copper wire from the Bead Warehouse online. The feminine triskelion is made by twisting 3 smaller wires together before you make the triskelion. It has a more delicate energy. We do sell these from our website: www.dancingwithwater.com

[@CraigTheCreator]

@@dancingwithwater thx for that knowledge 3 strains of copper wire. Didn't realize it's feminine

[@drakkvonboza]

Awesome.., thank you for sharing this!!

[@azizeqab]

MJ cheers I made one. Thanks for the tutorial.

[@josephina4792]

Very nice tutorial. Thank you.

[@ironhorse19]

great video very informative many thanks for sharing

[@lidiagrabovet2082]

Thanks a lot!!!

[@joywheeler4197]

love this design !!!

[@lonelyteens5715]

Well explained👍😅

[@wetpaint6354]

I’ve heard a lot of ppl say you need to make them clockwise

[@dancingwithwater]

No matter which way you make it, when you turn it over, it spirals the other way.

[@nikitaylor6808]

Thanks for the tutorial, I am going to give it a go. I just wonder if it will have any adverse effect if you were to glue a magnet to one side so you can stick it to a metal water container, or if there a better way to get them to stick to water containers?

[@KonStunTine]

Do you want to put it to outside of container? But it wont penetrate through another metal

[@ElizabethLightmore]

Thank you! I saw another video and she made it complicate. Very good instruction in this video :) It's so easy now!

[@greenland1164]

Perfect video, thank you

[@chryslunsford73]

Thank you 🙏

[@Milpower]

Isn't 18" a cubit?

[@nathanhafichuk]

Anywhere from 18" to 20.6" depends on what ancient civilization you subscribe to

[@Centannicocktails]

I wish the camera was far enough out to actually see everything.

[@otletplazaotletplaza4068]

Beautiful!!!!!!!!

[@odettepross2435]

Thank you

[@travi227]

Hi there! Great video, but I have a question. On your site here www.dancingwithwater.com/articles/rings-and-tensor-fields/how-long-is-a-cubit/ it says the ones sold by Dancing Water are 19.65 in., but this video says 20.5. Could you explain? Thanks!

[@travi227]

Oh nevermind, I see you are using the Egyptian Royal Cubit, but which one is best for water? thanks!

[@dancingwithwater]

There are many different "cubit" lengths, (the basic units of measure in different parts of the ancient world) . 20.6 inches was the cubit length used in the making of the Great Pyramid. We used this length to originally make triskelions. But in 2015, we identified another cubit length (19.65 inches) that is more in harmony with the resonance of the Earth today, so we began making our triskelions using this length. It's not critical and the measurement does not have to be exact in order for them to function.

[@charlesborders2893]

no hell 20.6is what she said may be you don't hear good now i explainedit to you may be you need to go back to the other video huh

[@PhilipHertzler]

Awesome thank you!!

[@iiixiayyy]

beautiful, thank you for the instructions

[@ljb9001]

Copper is usually coated to keep it from tarnishing. I sand it off to make mine. I tape it on the back of my cell phone. How well does it protect me from the radiation like an Orgon buster? Does it work on 5g protection? If so, how well?

[@lightloveandawake3114]

Yes, please, subscribed! 💗😊💗

[@darleenworkshop270]

Thanks for sharing 😊

[@thegodkayol8060]

Thanks you

[@jackblack4513]

excellent....thank you...!! xx

[@IYAOYAS6969]

wow nice!

[@domjuandeperon]

Show. Thank you very very much.

[@TamrikaLife761]

Super

[@ChristianBaloga]

Thank you! ❤️❤️❤️

[@gregorymann3431]

:)

[@pacapeople]

It seems as if I read that the coils need to be in a clockwise rotation to do "good." So if placed under a water container, should the spirals appear clockwise -- or does it matter with these? Very nice video, many thanks for sharing!

[@dancingwithwater]

doesn't matter which way the spirals turn but if you use a pair (masculine and feminine) underneath a water container, it is best to put one on top of the other one and position them so that they spiral in opposite directions.

[@nowwhat4438]

But flipping them changes the direction right? @dancingwithwater