Making a unique front suspension tilting tricycle

Going so far i'm introducing my new front suspension tilting design built to attach on a bicycle frame.
The benefits of that system is that you can carry a big basket between the front 2 wheels, as big as is the space there, because of the parallel moving of both wheels compared with the steering system.
Also the front suspension giving a smooth scrolling above the road bumping transferring the bounce from one wheel both to suspension and the other wheel - not to the frame.
Farthermore, despite the fact that the wheels have a soft feeling of damping individually, when they are overloaded at the same time, suspension hardens exponentially to withstand the pressure it receives.
Those "tilting designs" usually fail to keep the center of gravity low when cornering produsing the oposite phenomenon to their vehicles that attached. Having big wheel diameter, making that worse, because the user have to fight with the center of gravity when cornering. To solve that parammeter i choose a the very low front arm joints geometry relative to the hubs of the front wheels.
Disadvantages of my design is front braking. Because of the fact i have independent front wheels, braking is determined by road traction of each wheel. When one of them slips, the other push the front system to turn at one direction. I'm working to find a solution to this problem by putting a steering damper to my front system to decrease tha fact..
You can support me by ordering my new improved tilting trike kit on this link
/ 5439858046062339
3D animation: Dimitri Avramidis

[@WhyNotCycles]

My front suspension tilting kit is available upon request _facebook.com/commerce/products/5439858046062339/_

[@davds8918]

Hi ! Could I put fat tires on it for example and could it handle a 30kg weight ? Thanks

[@darkhunter777]

А чем обычный волосапед не устраивает ? ))

[@higleywelding8638]

How do I order one of these? When I click on link it goes blank? Pleases advise.

[@CL-gj9mf]

How many euros? If you sell it, i buy it!

[@sigurdurkjartansson696]

That's the best design that I've seen so far. Wish I had one.

[@kelvinleigh]

An e-bike in this configuration would be awesome!

[@grimcat27]

The extra speed and weight may make it a little dangerous. It has a wide turning radius and the suspension may be a problem. But hay if I had one I'd throw a 1500w rear direct drive on it and a class 1 controller on it.

[@telmozanotticardoso6064]

Um dos melhores designer de suspensão independente que já vai , ficou ótimo

[@dalezapple2493]

Great bike, would work great for the upcoming winter riding season

[@quentinpietersen1308]

Best concept lean-steer to a standard bike I've seen. Great engineering, hope it goes to production.

[@demandred1957]

NOT a concept. Mother Earth News did this almost 30 years ago.. look it up.

[@daysetx]

@@demandred1957 Please provide links or description, i would be very grateful for this info.

[@solarflare1008]

Great looks of this old technology. Congratulations.

[@fonwoolridge]

Wow! Been thinking of something a bit like this for a while - but this is on another level.... Bravo!

[@kadaalili7381]

where is the " making " part

[@maxgood42]

I like the simplicity of this design awesome

[@jiroyamamoto2878]

except the wheels need to turn at the hubs, like a car. In this design, the entire suspension turns and that takes up lots of space.

[@ianleyillustrado4351]

Amazing. I'm from Philippines. Thanks for sharing

[@magixcue9512]

Thanks for sharing your videos, I am building and design my project, unfortunately, I do not have any workshop and or any special tools. All parts built is bit by bit, part by part. I still working on it for better design on the suspension parts. Hope to complete it !

[@albertogutirrezjuarez239]

Wow, thats amazing, i need one like that

[@bicyclist2]

WOW! I love it. Very Cool! Thank you.

[@raantan6683]

Now this is something I need when I go out to avoid commuting

[@Waterlooplein1]

As a road bike for a single person I would say it is a roadhog. But as a bike to carry cargo or a person, great idea!

[@donkihotay5748]

Roadhog as in compared to 4-wheel Godzillas? (cycling champion POV)

[@Waterlooplein1]

They are roadhogs too.

[@allegrokids4426]

Excelent! Perfect! But ¿what's happen with the rear suspencion for back wheel?

[@snoopydoggy5196]

I'm going to try to make this with my everlast welder. I like the stability combined with the maneuverability.

[@jeromeriedl]

That thing is so cool! I would love the try that bike out. Also it would be really cool to see it with 2 wheels in the back. I don’t even want to think about what pulling a wheelie feels like. Oh wait, actually I do.

[@pranavchaugule1448]

Use motor at rear hub to assist pedaling !😊👌 Awesome work!

[@thechumpsbeendumped.7797]

This would be great for a streamlined tilting recumbent.

[@daniele_go]

Exactly! This is my project for a tilting velomobile: kzbin.info/www/bejne/q32ad2iabNtgias

[@MusiCaninesTheMusicalDogs]

I don't understand why we don't see recumbent trikes with such technology being sold. There's gotta be a catch!

[@thechumpsbeendumped.7797]

@@MusiCaninesTheMusicalDogs I suspect it’s because of a few things, cost, weight, complexity and size. These things are imo extremely overpriced in their standard, non suspension form. All the extra mechanical components are just gonna add to that. If the wheels are inboard they or the tilting mechanism needs to move, this movement takes up space meaning the body needs to be bigger to accommodate it and therefore less aerodynamic and also heavier.

[@MusiCaninesTheMusicalDogs]

@@thechumpsbeendumped.7797 Thank you for sharing your thoughts!

[@ricknoe942]

@@thechumpsbeendumped.7797 "These things are imo extremely overpriced in their standard, non suspension form." - I couldn't agree more!

[@divertechnology]

you are very human sourcer in sharing your design

[@alejandrocastro211]

beautiful simplicity

[@yasseralsaidi1168]

Now I just need a front basket for shopping items

[@alvarobotelhovillelaaprendernu]

És o Rei da suspensão para triciclo vou tentar fazer uma cópia kkkk + 1 vez parabéns 👏

[@jackhume4532]

Cool idea, this is something that I would have when I am a lot older, and also this tilting front duel wheels is a really good idea as you do not have to worry about the push that you can get with a standard duel rear wheel trike setup. A really cool idea.

[@BLACK-hl4ic]

O Men! It's awesome It's my dream proto cycle. You are Great 👍👍👍👍

[@jailsonmedeiros4444]

Cara vc é um gênio parabéns pela tua invenção 👏

[@julivalalmeidacardoso5745]

Este cara er fera

[@mgut17]

misleading title, should not be making but showing us a tilting tricycle

[@saulbenadiba9449]

Can we buy this bike somewhere in canada

[@didierdesbordeplombierbordeaux]

He sales the blueprint to make it ;)

[@samday6621]

Very cool and well executed. I’m interested to see how you distribute any load carried in front and if you need to extend the wheel base (front to back) to keep the rear grounded.

[@IXIskarfaceIXI]

This setup look like any excessive load in the front would resuslt in a loss of traction in the rear, so extending the lentgh of the bike seem to be a prerequisite. Your worry are real.

[@WhyNotCycles]

Porsche decided to place carrera's engine outside wheelbase at the rear of the car. They took this decision thinking of a car like more than an engine and four wheels. Passengers, bodywork and driving situations also affects to the traction behavior of the vehicle, especially at my design, carrying the weight of a human at the front, i think is possible, by the time a driver sitting at his possition. It would be a problem if I had no suspension on the front. In accidental breaking, the rear wheel would lose the ground if it was a little weight in front!

[@Hudsonkem]

i really loved your design bro, after I saw it, now i am desperate to do in my bike too.

[@chingachg00k]

That

[@Hudsonkem]

@@chingachg00k ?

[@antoon777]

Wow. Just Awesome. Thumbs Up !

[@strongblack4569]

Nice bike 👌💪 wish I had one

[@tiliniglesias5494]

Wow bro you've got a three tires jewell thanks for this delicious video I watched it twice

[@SEMPERE3D]

Flipant, (awesome) I love your work

[@shonnburton2757]

Awesome! This has so many applications. Would love something like this on a 30mph e-bike. Would also like a conversion kit that could be used on any bike. Let me know when I can buy one!

[@douglasgallardojr4759]

You can buy one now. See the pinned comment.

[@andycapo9you]

Very nice work, idea and setup. The only big problem here will be to drive with the system loaded, it will make you have arms like Arnold... 😅 Therefor the traditional steering system exists; to make the wheels change directions and not the whole load. I personally will put the damper inside the lower arm, that way, it won't change it's geometry everytime you tilt. Good Job!

[@armandomunoz3190]

Ay that's awesome . Shout out from El Salvador

[@sato547]

quiza este te ponga pedo kzbin.info/www/bejne/pYmxemCQltiSnK8&ab_channel=RWINSOLO

[@JakobusVdL]

Hi, very cool looking trike. Does the bike part become less stable because the front wheel is no longer directly attached to the forks? And how do you lock out the tilting when you park it?

[@abiseniyya]

I don't see the bike tilting, but the earth is.

[@raynic1173]

Is there any counter-steering involved when steering at speed?

[@g.b.9429]

Well done. Good job

[@jeffreybailess2560]

would you mind sharing the capacity of that shock absorber that you used?

[@unclepete100]

That is really cool man 👍👍

[@heidymatinez7356]

Works the way it is supposed to. Just Good

[@cmvinteriordesigns]

Wow! Wish I had one

[@111tier]

Огонь!!! Если бы немного чертежей, то можно собирать такой в гараже!

[@alvarobotelhovillelaaprendernu]

Parabéns 👏 pelo projeto 👏 muito bom mesmo 👏 um abraço

[@shaynescobie]

Beautiful machine

[@xcrcrypt]

this is something else my friend welll done!

[@brightshadows3931]

Did everyone read "making"? Or just me? Title should be "riding". 1 dislike for clickbait.

[@halphantom2274]

lol. congrats! you get 1000 points for entitlement. Is it really too much for you to just click on some points in the vid and then go somewhere else, if it wasn't what you searched for?

[@LifesAbe-ach]

Exactly Bright sick of the false labelling on here , lifes to short to waste watching this crap

[@donkihotay5748]

Here you get something creative and wonderful, free, costing only your time and attention, and still some people whine?

[@chanchleshamrate2624]

Excellent brother

[@crazyoldhippieguy]

6-12-2019.Did you read my mind?Is that SS tubing and why don,t you have a plate at the botten of the forks?

[@andret4144]

Parabéns genial o projeto

[@kingtut5923]

Very nice idea.

[@cesarvalerio4292]

Nice! Greetings from Brasil

[@grumpygrandpa3640]

So where can I get one or the details to make it from ?

[@mittapelliravikiran6942]

Camera work is 👍

[@MrHondata2000]

Ωραιος ρε φιλαράκι,μπράβο!

[@MustangsTrainsMowers]

Where do you get the front hubs, brakes and wheels? I have an old adult size trike I’d like to convert to 4 wheels.

[@koperasisan6663]

Simple and smart idea. . .

[@diogodantas3542]

Awesome design. Very well engineering. 👏👍 My father had an accident so now I have a tricycle to take “walks” with him and this would be perfect to add to it. Please tell me what I need to do for you to send me the blueprints or the cad Project of this?

[@888_p3t3r]

is there anything holding this bike upright when it stands still. Or would it fall sideways like a normal bike?

[@stopglobalswarming]

This isn’t the first of these made, but it is nice. If you have the steering angle and caster correct you can really shred down hill.

[@billhillyer334]

Nice soft squishy ride if a rear swing arm were to be installed

[@pfitz6693]

Very cool!

[@IXIskarfaceIXI]

I get it that is easier to transform the front instead of the back because of the need of a lot more work but wouldn't it be more usefull ? Like being able to carry more, what is the best pro for a double front wheel setup compared to the opposite ?

[@IXIskarfaceIXI]

Also what would be the difference in rolling resistance in both setup ?

[@rameswarareddyn3422]

Nice tricycle

[@carldegotie1009]

Hola. gran diseño. Cuanto cuestan y donde se orden los diseños

[@rafaelsantos7190]

what kind of metal materials use for this 3 wheels bike

[@AntonioSilva-he9uo]

Onde eu encontro esse tipo de bicicleta pra eu comprar???

[@vinayjangir7587]

Does it have ackerman steering?

[@emgee44]

Would like to see this on a recumbent trike, that would be my preference

[@edgardoponce3363]

is that thing already available in the market, if so... where?

[@marketingpuntocom8710]

que triciclo tan bueno!!!

[@darylogle6696]

Make a 1000w electric one with rear Suspension also

[@phatmeow7764]

Good Lord with a Galea helmet and a Gladius in a scabbard riding this one almost feels like a Roman legionary! I jest but great design - maybe a wee bit narrower to be more nimble in cycling paths/urban environments?

[@PabloPazosGutierrez]

What's the function of the spring?

[@bidyarajdoley9626]

Good job

[@Alvio64]

does it stand up on its own?

[@benyahiamohamed9230]

Nice work continue 👏👏👏👏👏👍👍👍👍👍👍👍

[@eddiecarrico4309]

Very very nice! The description says you have blueprints, I’m interested.

[@WhyNotCycles]

Hi. Blueprints are available. You send me your email and i will go on with paypal request and file transfer!

[@WFPllNGPD]

Very nice video. Which program has been used to create the animations?

[@manulemelin6904]

Nice design! what front hubs/axles did you used?

[@xanonadovas4403]

sir I hope you could share how you build this thing from zero to complete

[@ratnakarvankore3415]

Is the steering geometry correct as contact patch of the tyres are moving around the steering axis?

[@WhyNotCycles]

When this tricycle turns, the inner wheel approaches the rear as the steering axis is moving around. This is positive for faster and safer maneuvering. Shorter vehicles respond more directly than long-wheelbase ones. Correct or not, when driving I feel safe no matter what my speed is..

[@IXIskarfaceIXI]

@@WhyNotCycles being stable does not equal being safe, the danger come from others users of the road unfortunately.

[@christianpaulroldan4010]

How to keep it upright?

[@somedude-lc5dy]

does it hold you upright or do you still balance like a normal bike?

[@romandybala]

All the convenience of a bike with the width and complexity of a car.How do you get it thru a gate or doorway?

[@chuckcavan3036]

Man is that front tilting like a kit? Man would love that if it goes on sale.

[@WhyNotCycles]

No sorry! it is not for sale..

[@esydiy2047]

you can give me what is program modelling??

[@johnevans5559]

Hi, Are the blueprints still available for a fee?

[@ahmadmada5493]

Very interesting, i love it.. btw what your backsound this video?

[@charleyfoster7118]

So.... How do we get the plans for what you got so far? I don't want to wait until you perfect it. I want to build one now and see what developes!

[@WhyNotCycles]

Οκ Charley! if you are interested give me your e-mail to sent you the paypal request. (blueprints in rhino costs 33 euro vat & fees included) After complete the payment i ll sent you the files!

[@hmc.yiyelzedekalphametamor550]

Excellent Job. Get Investors, Broski. Promote That.

[@ajayarajbhandari6584]

How to make by self at home Can you send step by step procedure and items/ parts required for it. Great job 👌 you have done.

[@juanantoniozamoralopez9823]

Hi! Where can you buy a model like tilting tricycle? thanks

[@sarangkarwatkar6224]

Shockup name please .....which type of shockup use...

[@ianblueadventure]

Wish I could have one bro!!!! Wow