Making a Vossen wheel out of a steelie

[@johng6673]

I actually watched this without the translation. I was hoping you would translate it. I wish I could learn Russian just for your videos. I would even like to work at your garage for a project or two just because I love your work and videos. Keep it up!

[@JohnDoe-hy2op]

Same man, it would be fucking good to just fuck off for a while and have something to do while you are away, awesome.

[@ras4782]

How lol the guy is speaking

[@vk3hau]

ras 47 kzbin.info/www/bejne/amHIi56Zhtlgbas

[@MrTheHillfolk]

Trying to decipher which Russian word is the one for ghetto

[@SHAGG13]

​@@MrTheHillfolklol it's not gonna be a straight translation, BMI wings it a lot

[@migueldelacruz4799]

These guys are so much cooler than any similar show I've ever seen on TV.

[@SHAGG13]

Well duh they are REAL thats why!! This is my fave show by far

[@ANDYblacks13]

that came out a lot better than I first thought it would,the end result is amazingly good

[@tootone]

I wouldn't say amazing. But it looks pretty good for some random Russian dudes.

[@m.b.82]

It really isnt.

[@KngKurd]

These are awesome I mean for a wheel like that to change to that I give them props for looks, may not be perfect but is functional.

[@m.b.82]

@@KngKurd It's really not. It WILL fail with normal driving.

[@JuuS0]

When youre at tireshop and ask for vossen wheels and your mom goes "we have vossen at home"

[@stevebaker818]

😂😂😂

[@nolaboigee]

😭😂😂

[@gurrillakidd78]

Lmao

[@D.AndreTheCreator]

🤣🤣🤣☠️☠️☠️

[@marcoporseo]

...slavorum....

[@arevo8702]

LITERALLY IMAGINE IF THIS GUY DIES He's the most innovative guys ever pls stay forever

[@Marijus777]

Don't talk about deaths :(

[@baymax6894]

We all die, it's what we do now and pass on matters most

[@Zhdan54]

He himself is the best!

[@randylahey2242]

I think dr Oppenheimer is just a hair higher up on the list than this guy

[@wiedietie]

( ͡° ͜ʖ ͡°)╭∩╮

[@danielsgrunge]

I love how they just go and do it without talking bullshit for 10 minutes

[@Monolithic1m]

Yeah i was about to click off when they went st8 to it

[@bmw335hdk2]

So russian

[@commonsenceaintsocommonnom1496]

Gotta be the best part omg

[@vranastudio1882]

Yeah, without bullshit, just do it

[@bradsailer7739]

Thats why I click on garage 54 videos and not 24 minute long "lemme show you me track testing ma new modz" and the preview is someone talking.

[@spar8334]

I thought that benz was nice til i seen the exhaust bouncing on bumps and than it showed inside the car 😂😂

[@nail9602]

It is really nice wish they didn't waste it

[@granit6710]

Weight reduction bro

[@OnlyNotes]

Welcome to Russia

[@domgutta6389]

😂😂😂😂😂😂😂😂

[@soheils65]

yea me too lol

[@pops55650]

Can you imagine some thief stealing these wheels only to get home to see what he really got?

[@jatinjaiswal3273]

😂😂😂

[@yungkidnf]

Probably take them shits BACK!🤣🤣🤣

[@876inc]

😂

[@senadspahicc7456]

​@@yungkidnf these wheels are awesome you pigs, nothing worse than normal alu wheels

[@kakswell]

I love the lack of safety these videos have

[@mrcomenttoe2009]

That's why I like the old test on the roadway there

[@My_Way.44]

They’re have literally not time for testing .

[@shadowflare99]

Safety?

[@vivifyproductions9608]

Bruh its Russia

[@ВолодяУльянов-ъ7щ]

@@vivifyproductions9608 Russian people,sister ))

[@jordanoneill82]

i wanna see you test them against potholes, gutters, and see if they'll withstand lateral force. if they can withstand that then i'll be very impressed! also, you could easily balance them with no weights at all, where the balancer marks to add weight, rotate the wheel 180 degrees and remove weight with a dremel. will do the same thing

[@joewoz20011]

I think he should for sure make all 4 of those wheels. they seem like an interesting idea.

[@621ELECTRONICS]

4:51 That does look pretty nice on that car, and well done on that wheel. Next project, making a real Vossen look like a steelie!

[@G-ra-ha-m]

Great idea! Best to balance the bare wheel before spraying and just weld on steel to the inside (of the tyre section) to balance so you end up with minimal weights.

[@mariadelcarmendiaz1655]

It's like one of them SEMA builds!

[@DjPsYcOtIc]

7:15 - YES please do this, “put them on all 4 corners” so we can see how they hold up while doing the normal Garage 54 torture testing!

[@freeshavacado3959]

You look like you are happy in life, everyday, no matter what is going on. Great video you have made.

[@Saphire_Throated_Carpenter_Ant]

"SPIRITED DRIVING" 😂😂 Officer: "Do you realize how fast you were going?" Me: "Sorry officer, just doing a bit of spirited driving to test out these DIY rims I just made!"

[@dodgydruid]

Usually over there its a case of... "How would you like an invitation to a male only hotel with small rooms, lots of shouty, beaty people... or... would you like to pay an on the spot, off the record 'fine'... cash only credit cards not accepted..." You should see some of the more remote roads where bandits actually hijack cars and trucks lol

[@krazykafur]

I like how there is no dashboard !!! lol And them fucking wheels !!!

[@Jonathan_Doe_]

Alfa Romeo manuals always list one type of oil to use for ‘regular driving’ and one to use for ‘spirited driving’ which going on the recommendation being 5/10w-50 weight, means, driving it like you stole it!

[@lonerider5315]

Idiots: 10k for vossen rims Garage54: hold my beer, grabs grinder and a steely

[@thejay8963]

I mean they are Russian, so maybe vodka would be more appropriate?

[@billysgeo]

10k ??? I can get original Vossen 17” rims here for 600€

[@DemeDemetre]

of course

[@876inc]

😂

[@aaronburratwood.6957]

PLEASE do a full set of those. That is so great, I’d like to do this just to see the kinda thrashing they’d take on like a skid pad! Another great video.

[@slimatmim]

This wouldn’t last in Chicago. The pot holes would kill that wheel

[@aaronp9835]

KaneArts exactly lol

[@Rompastompa71]

If The Potholes Don't Kill You... The Gang Bangers Will. I Was Born & Raised There. Its Nothing Nice.

[@kurai95]

@@Rompastompa71 I'm from the ill mil. Potholes in the midwest are fuckin' brutal. If the potholes don't get u the hoods & thugs will.

[@moto6ixmoto83]

If you think Chicago is bad for potholes come to Calgary or Edmonton in Canada 🇨🇦 🇨🇦

[@londontrucker6804]

Have u seen Eastern european potholes??

[@johngillon6969]

Can you convert a tesla to run on gasoline?

[@zwz.zdenek]

The world needs a Tes-Zilla.

[@paulterhaar4862]

Just hook on a trailer with a power generator...

[@hamstirrer6882]

Or a Ls1, or hell even a big diesel with stacks

[@The81ubb]

i work for tesla and think thats would bee realy funny but there a lot of problems

[@fantomslobode9274]

@@zwz.zdenek You mean TesLada

[@CoconutsHD]

This should totally not be on the internet. But I am so glad it is.

[@LuchezaRStoineV]

Better that original Vossen :D

[@xNewNickx]

@Acca Larentia Vossen ist ein Premium-Felgenhersteller aus Miami, USA

[@ericvaria7807]

Stronger than vossen

[@vdochev]

хах!

[@BITTYBOY121]

100% TRANSFORMATION ! That steelie looks the business !, The only downside is in 6 months to 1 year's time after the rain and snow, It is of course CORROSION !! - When the steel welds start to rust and become weak (and dangerous) ....Maybe with the right rust prevention treatment and a good thick tough powder coat this would work well ? - Great video - I love your videos and translator !

[@XtheUnknown99]

Who needs welding gloves? Russian skin is tougher than leather.

[@joe125ful]

Yes!

[@AlexReiter1988]

Da

[@kaossmrlemonz6595]

Who needs weld, russian force wheel to hold in one piece for fear of getting welded

[@BrandonVink]

In russia cloves need russian skin to protect the cloves

[@RajPatel-by3wj]

Indian welders don't need even a welding helmet. (Legend)😂

[@georgeserrano8354]

That was incredible. I never thought that this was possible. Your very talented, and I wish I knew how to weld. I would try this with a budget build. It looks decent enough to use on a weekend...or two.

[@rodrigogomes7546]

Next video: Turning a Lada into a Ferrari.

[@jfv65]

Or a Lamborghada or a Ladaghini 🤣

[@Hapesky]

I think they turned lada to porsche.

[@jeromejohnsonjr3465]

Translation and voice over by BMI Russian

[@Metin2PLTYTANIS]

Next video: Turning a Ferrari into a Lada.

[@arnoldwerli9370]

@@Metin2PLTYTANIS easy, the cluster is the same 2107 vs f40

[@jeremylakenes6859]

This will inspire many people...and will cause lots of accidents.

[@mrcomenttoe2009]

I like the way they test their stuff on the highway

[@mrcomenttoe2009]

😃😃😃😃 I love this channel

[@funkworthrollin4959]

I'm impressed. Real talk. It worked.

[@tonyg2.48]

And I thought I was the only one that had a welder in a shopping cart😂

[@terrandroid]

Have one too

[@Gu1tarZer0]

just built a cart yesterday for my boss' new multimatic with one haha

[@stclairstclair]

Harbor Freight $40, I'm broke and this was too cheap to f%ck around with.

[@rustedratchetgarage6788]

I put 2 big batterys and push mine into the parking lot to jump cars with

[@ViewThis.]

I put some wheels on my welder made out of Steel Power Steering Pulleys.

[@NoblePineapples]

Seeing how clean it looks on the outside then it cuts to an inside shot of it absolutely gutted. I had to think for a second before I realized it was the same car. Wild.

[@allesflauschig]

I'd like to order 4 rims, please. 😁

[@nejinaji]

That'll be 50$

[@joe125ful]

@@nejinaji Only?And balanced too+free shipment?:)

[@Bemaritohtori]

@@joe125ful including tires

[@joe125ful]

@@Bemaritohtori Ofcourse:)

[@noobus1423]

And a deathwish

[@shifty2755]

This is a superb idea. This makes them a lot stronger over alloy wheels.

[@chrismechanic2000]

i got to admit the rims look sick, how about some different rims and some stress testing, which wheel design is best, have a build off with the guys in the workshop.

[@donsparks1280]

Does this mean this is a faster setting

[@Ty_____G]

This guy deserves more subscribers! His risking his life everytime for our entertainment 👍🤘

[@PNWLeviathanFPV]

I’m honestly curious as a welder to see how long these would hold true and hold up.

[@NorthFraserFab]

Honestly probably not very long, I see the center being a problem with how thin it is

[@DarioLProductions]

@@NorthFraserFab but is any rim built like that strong?

[@TheDougSpot]

Dario No wheel on the planet is built like this. This wouldn’t be as strong as a cast or forged wheel at all

[@aligatorualigatoru7116]

One drift and is blow...👎

[@deathuponusalll]

Getting new rims for the ‘ol Lada 👌🏼beautiful!

[@jcelldogs]

The only thing I see is one of the spokes arent symmetrical

[@JM-yx1lm]

Is that why they look homemade?

[@georgendiga]

True garage 54 good work work on angles that spoke aren't symmetrical

[@commonsenceaintsocommonnom1496]

They actually look crisp and clean asf wow and I got some Steelies on my ride that's pretty much the same rim

[@jamiewhitney5136]

Good job ! You and your crew are really talented..

[@jjeshop]

I can't believe he drove that on the road.

[@OneNiftyBoi]

Balls of steel.

[@TheLiamis]

Its russia, you expect to see cars with only 1 wheel on the road.

[@miscojones35]

@@OneNiftyBoi rims of steel*

[@prbabu1255]

This is what I am searching for. It is awesome. Good job 👍 Thank you guys .

[@ccerbo2373]

Garage 54 watching a Macgyver re run,,, laughs out loud and says in Russian “Child’s play.”

[@z1ggyn124]

My comrades did it again... Beautiful!!!

[@MrSkyline11]

Drake nah: Learning russian to met some nice girl. Drake yea: Learning russian to watch garage 54.

[@z1ggyn124]

Bro don't ever go that route...she'll take you through the cleaners and cut your heart out with a plastic spoon.

[@romag2848]

Start with "Heyto Pez-deats. Make sure you saying that really fast, and rise both of your hands to the sky, eyes open wide, looking to the ground.😂😂 🤣🤣😭😭😭😭😭😭😭😭😭😭😭😭😭😭

[@Moppemannen_mattias]

Nice! But you should balance the rim before you put the tire on. But with welding.

[@marv8481]

Friend: “ bro, look at the wheels I got on order!” Me: “you get some cheap Chinesium alloys?” Friend: “No, They’re coming from Russia. Why? 😂 this is purely awesome.

[@sachablake6894]

Good vid, no nonsense old school garage just getting shit done 👍

[@Zhdan54]

Friends, I see Vlad every day, if someone wants to say something, write to me, I will try to pass it on!

[@SwapBlogRU]

На полном серьёзе?

[@miscojones35]

Just tell him to never stop making these videos, I love them!!

[@Zhdan54]

@@SwapBlogRU на полном )

[@Zhdan54]

@@miscojones35 Vlad always tries for his viewers!

[@numberq1134]

Collab with Life of Boris!

[@veryfineworldmusic]

it so nice to see someone who has ideas and talent and use ideas with courage and without typical north american i have a new part to replace the broken one: still cannot fix shit right in some american garages i have noticed. very refreshing! bravo spasiba.

[@Cyba_IT]

Love how he tests it out on a public road. Classic Ruskie

[@joeyjovan7453]

i hit the thumb up button for your effort

[@bradleyhouse3180]

I keep watching this and thinking those rims would be legit, if they only reonforced the hub area with an additional 0.25" steel disc.

[@rustedratchetgarage6788]

Agreed

[@paultfoy]

Totally agree, first real foot down power and that centre piece is going to rip right off

[@bradleyhouse3180]

@Martyn Watson That's scary to know, makes you wonder why they were even tested in the first place.

[@keithwhisman]

Much love from Arizona USA! Your videos are awesome!

[@Khercules]

"are those replicas?" "Nah, they're legit"

[@World-Superbike]

Beautifully Russian! Faux alloy from a steel wheel,made from scrap and constructed with a welder in a shopping cart! Just fabulous! Plus, gloves are for westerners lol

[@jimmyj2563]

Now I want to see them tested to failure point.. and compared to the standard wheels and the alloy version.

[@SuperColonel99]

Me too. I wonder how strong this wheel is.

[@pequlatv4814]

Tho that 190 merc looks dope

[@Skitungen]

Could you try to make wheel spacers out of old brake rotors?

[@Tomyp89]

Done that. Bit thin, bit heavy, other than that they work fine.

[@upnorthviking823]

We were using them back in the 90s I made a few sets myself..not very thick tho

[@RobertJeffersonBased]

@@upnorthviking823 You could feasibly double up the rotors after you cut the friction surface off and weld them together

[@rustedratchetgarage6788]

@@RobertJeffersonBased find a rotor with a smaller hat size but same lug get 4 rotors cut hats off on a lathe weld back to back lugs go inside inner one drive studs into outer hat and bolt on wheel

[@susanneifren8560]

Nice looking merc, Nice dash too...

[@TheDrakenZ]

yessss a new garage54! ggoooooooood day :D

[@carlos1rsa]

Love this guy, amazing character.

[@Nightelfmusic]

I see this folding in on it's self as soon as it hits a pothole.

[@aronjohnson2860]

Dude that's what I was thinking 💯.....I really don't think they'd be road worthy....especially out here in California....the roads are rim and tire KILLERS

[@patienceedwin4242]

This could never fold on it self that's for sure

[@RayTitske]

looks really amazing great job guys

[@Radzio2006]

Make another 3 of them ! And fit it on this mercedes

[@hundsboog]

283 german TÜV engeneers got immediately a heart attack while wtaching this video :-D Garage 54 best channel!!!

[@sopretty43vr]

Am I the only one that doesn’t like Vossen wheels? Something about it reminds me of a 5 year olds design for his car drawing

[@matcltn]

Yung Tarantino they look like what came on the hot wheels pink corvette from back in the 80’s I can’t stand them either

[@Lousy_Bastard]

Not just you.

[@cristianzorila815]

The rims look nice. Good job

[@glen7463]

haha I was going to say about him driving with no seatbelt but no dashboard or speedo is proper Russian 🤣

[@jay5112006]

Proper fucked up

[@kendellejones2147]

Thanks you Guys for bringing Me entertainment when bord. I think you/yall should make 3 more wheel for that car it really came out. Nice. Also one suggestion maybe weld the back side inside for more stability and roughness but all in all great finish. You guys stay with you equipment also THE Coronavirus currently called COVID-19.. Remember wash yours.

[@StandWithRussia]

US: don't try this at home we are trained professionals. Russia: go buy some steel and make your own. Just make sure you buy thick box bar that can handle the stress. The difference between snowflakes nation and the awesome boys will be boys go have some fun nation haha 😂🤣😅

[@hlmc00]

more like well i don't have the money i make my own XD

[@ΑΡΗΣΚΟΡΝΑΡΑΚΗΣ]

Knowing how sue happy Americans are, they play the "don't try this at home" tape, so they will be covered in case that a DIY rim fails.

[@StandWithRussia]

@@hlmc00 is this how you Americans make yourselves feel better? Haha 😂🤣😅

[@hlmc00]

@@StandWithRussia well I am not a American

[@StandWithRussia]

@@hlmc00 fair enough. Haha

[@chiefdenis]

I didn't believe the thumbnail till i saw it with my own eyes, insane!

[@richardbaker_0088]

Seems like it would fall apart eventually after hitting a few pot holes

[@AldousForestTheLast]

Richard Baker _008 it’s not aluminium. Steel is very durable especially when it’s thick steel

[@TheDougSpot]

T Hanks It’s welded. It doesn’t matter what it’s made from, a welded wheel will never be any kind of durable

[@blackbass4u2c]

With enough vodka they risk it for the печенье.

[@mysteriousfleas]

It depends on the grade of steel, and I suspect this might be mild steel. Also it depends on the filler metal and process you’re using, I would NOT have used a wire feed system, for those welds to stand a chance under dynamic loading you would have to burn a hot root and each filler pass would have to be immaculate. Even then, yes over time it would succumb to rapid cycles of stress you would have because of the nature of the welds and the fact that it’s a rim for a car tire. The way they did it was completely meme tier and I wouldn’t expect it to last or trust my car with it.

[@daniells71]

@@TheDougSpot Heavy duty truck wheels are welded. Some don't even hide the joints.

[@ksubchallangeBefore]

These guys make these things look so easy

[@jonijantunen8957]

5:25 Brian Shaw enters and the stress test is him sitting in the back seat

[@broadexuk]

10/10 the most ill advised thing recommended to do on KZbin today

[@drlove891]

Question: How come the welder didn’t wear any gloves or a mask?

[@Skitungen]

Russia :)

[@bighookpgh]

I do it when I'm tacking up a piece but I'll use my mask for when I'm really laying down some weld

[@Timsturbs]

we call it dementia and courage

[@Troy.G630]

Because they're Russians

[@djdjukic]

No gloves, but he is clearly wearing a mask while welding!

[@kitaryakysubae3156]

That w201 Mercedes S-class just looks the business in a gloss black mica with some 5 piece 17s

[@BROKERICHGUYog]

Do some burnouts and skids on it and see what it'll hold up to..

[@FloridaMan0561]

BROKE RICHGUY That would be a good video for sure.

[@andyc3856]

That wheel is lethal, Fun to watch though 😎

[@gazs7237]

No welding gloves... this man is coated in hard skin

[@carpetsomething]

I learned the hard way not to weld upwards wearing a t-shirt and no gloves lol

[@gazs7237]

Carpet Something absolutely! You learn from the burns

[@harikeshtiwari]

Phle hi theek tha eska kya bharosa 😆😅😂

[@davethemagnificent2576]

I've tried doing it 4 different times. Now my car is sitting on blocks and I can't get to work. 🤷‍♂️😡

[@freze64]

🤣🤣🤣🤣

[@hardtailshredder]

This is so cool😍😎 Best DIY ever man!

[@LastCallSRT]

The interior of that Mercedes also started as a steel wheel.. damn.

[@scherpebocht]

Haha!

[@z1ggyn124]

That use to be a bathtub.

[@erikig]

Mind blown 🤯

[@joeball5107]

My side aches from laughing

[@mrx1616]

Love the welding cart 🤣🤣

[@RyshusMojo1]

Those wheels seem about as stable as Hillary Clinton.

[@eugenewash65]

Or a piece of sh"t like Donald Trump

[@koloblicin]

that shopping cart welder is so nice

[@jr5325]

The rims I would draw on my cars in kindergarten

[@buurman2635]

Red Geeko cibertruk fune

[@kennedyluapula6957]

This is magnificent.... I like the initiative.

[@StoicaVladIoan]

I'll just take the carved out steelie, thank you

[@Wreckz_Tea]

These guys are geniuses lowkey

[@LuisPerez-gz5ci]

Damn Russia you scary...... Note to self: never buy vossens that ship from Russia!

[@danielf.285]

Bro this is a diy project, they wont be up to sale...

[@thejay8963]

Daniel Fedorenko It’s a fucking joke...

[@danielf.285]

@@thejay8963 Damn bro got me there

[@MrNeverRyanLive]

Dude that looks pretty good I would be happy with that for just driving around

[@unrealking42069]

why the heck im everytime here in time ?

[@ΚωνσταντινοςΓ-ω6φ]

When the job is done you are so happy and proud with your work......and then you realize you have to repeat the whole process 3 more times....

[@spitsomefire]

New wheels from Vossen ''From Russia With Love'' 18 limited edition

[@scrapy5563]

Dope. Very creative 🦸‍♂️🤯🤠🥳

[@RaymondLo84]

8:05 I am not buying any wheels from Russia D:

[@tylerschaub1791]

Lmao

[@Dominuce]

Nice set of snow wheels