Making car magnets ( with vinyl )

[@maquellewilliams2061]

Thank you kings for sharing 💖

[@RDIdecals]

You’re welcome! Glad our videos are helping other people

[@SM-cw9jk]

Thank you for the information 👍👍

[@RDIdecals]

You’re welcome!

[@TheMyEighties]

Thank you.

[@RDIdecals]

You’re welcome! Thanks for watching!

[@MsTiggytig]

Great video. Just ordered a 5ft roll.

[@RDIdecals]

Thank you so much! We sell a lot of them and I'm sure you will too 😀.

[@ronstewart649]

This is exactly what I visualized, thanks for the video

[@perlarubalcava5029]

Thank you for all your help!! You guys are awesome

[@RDIdecals]

You're welcome! Thanks for supporting our content 🙏

[@toneyslifestylehustlez8574]

I gotta get my Vinyl Cutter running I can't wait to try this . Thanks for Sharing 👍

[@RDIdecals]

You should buddy! It was a little frustrating for us to have it running the very first time. No problem, thanks for your feedback.

[@nootcakes427]

Thank you! I’m learning from your videos.🥰

[@RDIdecals]

Hello Veronica! We are so happy to hear that, thanks for supporting our content 🙏

[@chelseyblackston6688]

Thank you so much for the tips! I’m using my Cricut machine... so a much smaller scale but this was amazing! New subscriber here🙌🏽🙌🏽

[@RDIdecals]

We appreciate your support! Glad to help. Great things start with a small step, keep up the good work 🙌🙌

[@ImperfectMuneka]

thanks so much for the video !!

[@RDIdecals]

You're welcome! Thanks for watching.

[@gregoryc5989]

Good Job, thanks

[@RDIdecals]

Thank you so much!

[@IRoCk4eVa329]

Been watching all your videos! Love the content, thanks for all the great ideas

[@RDIdecals]

You're welcome! We are glad to hear our videos are bringing value. Thanks for watching 👏

[@teresadrwiega605]

thank you!

[@RDIdecals]

You're welcome! Thanks for watching 😀

[@Jaden_856]

Hi guys yes I'm learning n thank yous

[@RDIdecals]

We are glad to hear that! Thanks for watching 👏

[@tlcbear411]

Can you please tell me what kind of transfer tape you're using?

[@jorgequijano100]

I want to start my businesses in Mexico and in Belize. What do you suggest me to start with and with what machine?

[@RDIdecals]

It really depends on type of budget, if you can afford a vinyl cutter like a Graphtec or Roland you should definitely go for one of those. About what type of products to sell, you should do a little research as type of potential customers. Are there any construction or landscaping businesses in the area? Or is it mainly school and churches? This information is crucial as it will give you an idea of what type of products you could sell.

[@desireereyes185]

So you can use water with slide on the vinyl? it doesn't stop it from sticking?

[@RDIdecals]

You can use liquid (90% water 10% alcohol) the reason we use it is so we move the vinyl around or if you miss place it, you have a few seconds to take it off. It does prevent it from sticking but only for a few seconds, after you squeegee, the vinyl will stick.

[@3cdesignz152]

Good evening. What sealer do you use and is it UV protected?

[@RDIdecals]

Hello! According to the manufacturer there's no need to use sealer for the vinyl we use ( Oracal 651 ) The life span is approximately 6 yrs and is supposed to be uv and water resistant. Hope this answers your question.

[@thairyduque]

simplemente Genial! sus videos son buenisimos! Gracias por compartir! cuanto cobran ustedes por una pieza de 24 inch x 20 inch? no se cuanto cobrar! es ,i primera vez haciendo esto y es de la mano de ustedes!

[@brainybeauty25]

This is a great video! Cant wait to try this. What brand of transfer tape did you use?

[@RDIdecals]

Thank you so much! We used RTape Clear Choice AT75 and you can get it from uscutter.com

[@ElMrJhonny]

How much you charge for one piece?

[@noreenhuff3161]

What kind of vinyl cutter do you have and how much did it cost?

[@RDIdecals]

I own two, they're both graphtec ce6000 but one is 15 inch $ 1,195.00 and the second is 25 inch 1,795.00. I wouldn't spend on the bigger one unless I was planning on making big projects. Hope this helps. uscutter.com is a reliable source.

[@noreenhuff3161]

@@RDIdecals TY. You make it look so easy!

[@thesehandsbyjoy]

Hello, what kind of ruler are you using to cut the magnet?

[@RDIdecals]

Hello Joanna! I am using a 31 inch (big foot safety ruler) you can get it from uscutter.com and it runs around 39.99 + shipping or you can get it from Amazon @ 49.99 free shipping, I will leave out affiliate link if you'd like to get it from there: amzn.to/34HkYwN

[@Joybgh]

@@RDIdecals Awesome, thank you so much!!

[@RDIdecals]

@@Joybgh You're welcome!

[@brendanolasco6884]

Es mucho mejor en equipo muchas felisidades, yo empieso apenas

[@RDIdecals]

Hola Brenda! Bienvenida a este maravilloso emprendimiento, felicidades por dar el 1er paso. Tenemos varios tutoriales y le voy a dejar el enlace a nuestro canal de KZbin en español por si aún no nos sigue. kzbin.info

[@brendanolasco6884]

@@RDIdecals ya me suscribe tambien gracias

[@rubenramirez428]

What kind of Vinyle is used ?

[@RDIdecals]

Hello Ruben! We used Oracal 651 vinyl

[@craftingwithbcapparelmore9356]

Do ubguys have a website

[@RDIdecals]

We do although we are going to redesign it, it is mainly for display lol. www.royaldesignsindy.com

[@captainstickershub418]

I know this work am from india

[@RDIdecals]

Hello @captain stickers hub! Thanks for watching, we learn something new about this kind of work almost every day 😃 there’s so much to learn